ADSL-DMT-LINE-MIB Download

adslLineDmtTable

This table extends the adslLineTable and contains common attributes describing both ends of ADSL lines supported by the system.

adslLineDmtEntry

A set of common attributes describing both ends of an ADSL line supported by the system. There exist an entry for each ifEntry with an ifType of adsl(94).

adslLineDmtTrellis

Reports whether the Trellis coding is used on the DMT line. Use of trellis coding is determined at line initialization with C-MSGS1 and R-MSGS1 exchanges and will not change until the line is re-initialized.

adslLineDmtEOC

Reports whether the eoc can support autonomous data streaming mode or only transaction mode. After initialization, unknown is reported until sufficient autonomous eoc messages have been transmitted to determine the true capability of both ATUs.

adslAtucDmtPhysTable

This table extends the adslAtucPhysTable and contains specific physical layer parameters for the ATU-C class devices supported by the system.

adslAtucDmtPhysEntry

A set of physical-layer parameters for an ATU-C class device supported by the system. There exists an entry for each ifEntry with an ifType of adsl(94).

adslAtucDmtIssue

Reports the issue number of the relevant standard that the DMT ADSL transceiver at the ATU-C is currently operating to. The issue number will be fixed by the hardware and is transmitted by the ATU-C in C-MSGS1 during initialization.

adslAtucDmtState

Reports current state of the ATU-C DMT transceiver. The current state can change dynamically. The SNMP agent reports the state after querying the ATU-C state machine.

adslAtucDmtInterleavePath

Reports bearer channel of downstream interleaved path.

adslAtucDmtFastPath

Reports bearer channel of downstream fast path.

adslAturDmtPhysTable

This table extends the adslAturPhysTable and contains physical layer parameters for the ATU-R class devices supported by the system.

adslAturDmtPhysEntry

A set of physical-layer parameters for an ATU-R class device supported by the system. There exists an entry for each ifEntry with an ifType of adsl(94).

adslAturDmtIssue

Reports the issue number of the relevant standard that the DMT ADSL transceiver at the ATU-R is currently operating to. The issue number will be fixed by the hardware and is transmitted by the ATU-R in R-MSGS1 during initialization.

adslAturDmtState

Reports current state of the ATU-R DMT transceiver. The current state can change dynamically. ATU-R state is reported by the SNMP agent at the ATU-C which infers the state depending on the ATU-C state. When the inference cannot be made, unknown state is r ...

adslAturDmtInterleavePath

Reports bearer channel of upstream interleaved path.

adslAturDmtFastPath

Reports bearer channel of upstream fast path.

adslLineDmtConfProfileTable

This table extends the adslLineConfProfileTable and contains ADSL DMT line configuration information.

adslLineDmtConfProfileEntry

A configuration profile containing ADSL DMT line configuration information.

adslAtucDmtConfFreqBins

A string of 32 bits to enable/disable the incoming DMT frequency bins that the ATU-C receiver monitors. Each bit controls one bin with the first bit of the first octet controlling sub-carrier zero (lowest frequency bin). A bit set to 1 disables reception ...

adslAturDmtConfFreqBins

A string of 256 bits to enable/disable the incoming DMT frequency bins that the ATU-R receiver should monitor after the next activation. The mechanism to pass adslAturDMTConfFreqBins to the ATU-R is vendor specific. Each bit controls one bin with the fir ...

adslLineDmtConfMode

Defines the operational mode of the DMT ADSL transceiver. Configured in the C-MSG1 and C-MSG-RA exchanges.

adslLineDmtConfTrellis

Enables the Trellis coder of the DMT transceiver. Configured in the C-MSG1 and C-MSG-RA exchanges.

adslLineDmtConfEOC

Defines the embedded operations channel mode for the DMT ADSL line.

adslAtucDmtConfInterleavePath

Target channel for downstream interleave data path.

adslAtucDmtConfFastPath

Target channel for downstream fast data path.

adslAturDmtConfInterleavePath

Target channel for upstream interleave data path.

adslAturDmtConfFastPath

Target channel for upstream fast data path.

adslLineDmtGroup

A collection of managed objects defining the attributes of an ADSL line supportings modems using the DMT line code.

adslAtucDmtPhysGroup

A collection of managed objects defining the physical-layer parameters of an ATU-C using the DMT line code.

adslAturDmtPhysGroup

A collection of managed objects defining the physical-layer parameters of an ATU-R using the DMT line code.

adslLineDmtConfProfileGroup

A collection of managed objects defining the line configuration information associated with one or more ADSL ATU class devices implementing the DMT line code.