ADTRAN-AOS-NETWORKMONITOR Download

This MIB contains network monitoring information.

IPHost Network Monitor offer an easy way of SNMP monitoring your ADTRAN Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for ADTRAN-AOS-NETWORKMONITOR

adGenAOSnmProbeTableNextIndex: This object contains an unused value for adGenAOSnmIndex in the adGenAOSnmProbeTable, or a zero to indicate that none exist.
adGenAOSnmProbeTable: Create a network monitor probe.
adGenAOSnmProbeEntry: The parameters for a particular network monitor probe.
adGenAOSnmIndex: Uniquely identifies a row in the adGenAOSnmProbeTable. This is the index chosen by the management station for row creation. If the adGenAOSnmIndex is already in use when attempting to create a new row with a set operation, then an error will be returned.
adGenAOSnmName: Unique string to identify probe.
adGenAOSnmType: Specifies the type of probe.
adGenAOSnmRowStatus: SNMP Version 2 Row Status Variable. The status of the conceptual row. In order for this object to become active, the following row objects MUST be defined: adGenAOSnmName and adGenAOSnmType. The control row objects adGenAOSnmName and adGenAOSnmType cannot ...
adGenAOSnmConfigProbeTable: Configure a network monitor probe.
adGenAOSnmConfigProbeEntry: The parameters used to configure a particular network monitor probe.
adGenAOSnmCfgName: The name of the corresponding probe entry. The probe identified by a particular value of this index is the same probe as identified by the same value as a adGenAOSnmName object instance.
adGenAOSnmAdminStatus: Specifies ability to enable or disable the probe.
adGenAOSnmPollPeriod: Specifies the poll period, in seconds, of the probe.
adGenAOSnmTimeoutPeriod: Time to wait for a response after which a packet is considered lost.
adGenAOSnmToleranceMode: Specifies the tolerance mode of the probe.
adGenAOSnmFailTolerance: Specifies how many probe operations must fail before the probe state transitions to the fail state.
adGenAOSnmPassTolerance: Specifies how many probe operations must fail before the probe state transitions to the fail state.
adGenAOSnmToleranceTestSize: Specifies test size for rate calculations when the tolerance mode is set to 'rate'.
adGenAOSnmClearCounters: Clear the counters and statistics history of a probe. This is a write-only variable. A read will result in no action being taken.
adGenAOSnmProbeStatusTable: View the status of a network monitor probe.
adGenAOSnmProbeStatusEntry: The parameters used to view the status of a particular network monitor probe.
adGenAOSnmStatusName: The name of the corresponding probe entry. The probe identified by a particular value of this index is the same probe as identified by the same value as a adGenAOSnmName object instance.
adGenAOSnmTestStatus: Current test state of the probe.
adGenAOSnmTestsRun: Number of test run on the probe.
adGenAOSnmTestsFailed: Number of test that failed.
adGenAOSnmStatsToleranceTestSize: Specifies the test size.
adGenAOSnmStatsToleranceTestValue: Specifies number of tests that passed or failed. Check 'adGenAOSnmTestStatus' for test state.
adGenAOSnmTimeSinceLastStatusChange: Time since last status change.
adGenAOSnmCfgTwampProbeTable: Configure a network monitor TWAMP probe.
adGenAOSnmCfgTwampProbeEntry: The parameters used to configure a particular network monitor TWAMP probe.
adGenAOSnmCfgTwName: The name of the corresponding TWAMP probe entry. The probe identified by a particular instance of this object is the same probe as identified by the same value as a adGenAOSnmName object instance.
adGenAOSnmTwDestHostname: Specifies the destination hostname or IP address as a string in dotted decimal format.
adGenAOSnmTwDestPort: Specifies the destination port. If zero then the actual destination port will be dynamically negotiated with the responder.
adGenAOSnmTwSrcIP: Specifies the source IPv4 address.
adGenAOSnmTwSrcPort: Specifies the source port. If zero then the actual source port will be dynamically assigned ever probe operation.
adGenAOSnmTwDscp: Specifies the DiffServ Code Point value that will be used on packets sent and will be negotiated with the responder.
adGenAOSnmTwPaddingLen: Size of TWAMP padding length.
adGenAOSnmTwPaddingFormat: Specifies the format of the padding pattern.
adGenAOSnmTwPaddingPattern: Specifies data pattern to pad the packet. This can be an ascii or hexadecimal pattern and must match the type set in adGenAOSnmTwPktFormat. In addition, adGenAOSnmTwDataPadType must be set to 'custom'.
adGenAOSnmTwDataPadType: Specifies how the TWAMP padding payload is filled.
adGenAOSnmTwPktSendCnt: Specifies the number of packets to send and receive for one probe operation. More than one is required for inter-packet delay variation measurements.
adGenAOSnmTwSendScheduleType: Specifies in milliseconds the time between test packets during a single probe operation.
adGenAOSnmTwSendScheduleValue: Specifies in milliseconds the time between start of each packet send operation.
adGenAOSnmTwIpdvAbsInMinFail: Specifies the minimum inbound absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail.
adGenAOSnmTwIpdvAbsInAvgFail: Specifies the average inbound absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail.
adGenAOSnmTwIpdvAbsInMaxFail: Specifies the maximum inbound absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail.
adGenAOSnmTwIpdvAbsInMinPass: Specifies the threshold in milliseconds for minimum inbound absolute-value inter-packet delay variation that will allow the probe operation to pass.
adGenAOSnmTwIpdvAbsInAvgPass: Specifies the threshold in milliseconds for average inbound absolute-value inter-packet delay variation that will allow the probe operation to pass.
adGenAOSnmTwIpdvAbsInMaxPass: Specifies the threshold in milliseconds for maximum inbound absolute-value inter-packet delay variation that will allow the probe operation to pass.
adGenAOSnmTwIpdvAbsOutMinFail: Specifies the minimum outbound absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail.
adGenAOSnmTwIpdvAbsOutAvgFail: Specifies the average outbound absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail.
adGenAOSnmTwIpdvAbsOutMaxFail: Specifies the maximum outbound absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail.
adGenAOSnmTwIpdvAbsOutMinPass: Specifies the threshold in milliseconds for minimum outbound absolute-value inter-packet delay variation that will allow the probe operation to pass.
adGenAOSnmTwIpdvAbsOutAvgPass: Specifies the threshold in milliseconds for average outbound absolute-value inter-packet delay variation that will allow the probe operation to pass.
adGenAOSnmTwIpdvAbsOutMaxPass: Specifies the threshold in milliseconds for maximum outbound absolute-value inter-packet delay variation that will allow the probe operation to pass.
adGenAOSnmTwIpdvAbsRtMinFail: Specifies the minimum round-trip absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail.
adGenAOSnmTwIpdvAbsRtAvgFail: Specifies the average round-trip absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail.
adGenAOSnmTwIpdvAbsRtMaxFail: Specifies the maximum round-trip absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail.
adGenAOSnmTwIpdvAbsRtMinPass: Specifies the threshold in milliseconds for minimum round-trip absolute-value inter-packet delay variation that will allow the probe operation to pass.
adGenAOSnmTwIpdvAbsRtAvgPass: Specifies the threshold in milliseconds for average round-trip absolute-value inter-packet delay variation that will allow the probe operation to pass.
adGenAOSnmTwIpdvAbsRtMaxPass: Specifies the threshold in milliseconds for maximum round-trip absolute-value inter-packet delay variation that will allow the probe operation to pass.
adGenAOSnmTwDelayInMinFail: Specifies the minimum inbound delay threshold in milliseconds that will cause the probe operation to fail.
adGenAOSnmTwDelayInAvgFail: Specifies the average inbound delay threshold in milliseconds that will cause the probe operation to fail.
adGenAOSnmTwDelayInMaxFail: Specifies the maximum inbound delay threshold in milliseconds that will cause the probe operation to fail.
adGenAOSnmTwDelayInMinPass: Specifies the threshold in milliseconds for minimum inbound delay that will allow the probe operation to pass.
adGenAOSnmTwDelayInAvgPass: Specifies the threshold in milliseconds for average inbound delay that will allow the probe operation to pass.
adGenAOSnmTwDelayInMaxPass: Specifies the threshold in milliseconds for maximum inbound delay that will allow the probe operation to pass.
adGenAOSnmTwDelayOutMinFail: Specifies the minimum outbound delay threshold in milliseconds that will cause the probe operation to fail.
adGenAOSnmTwDelayOutAvgFail: Specifies the average outbound delay threshold in milliseconds that will cause the probe operation to fail.
adGenAOSnmTwDelayOutMaxFail: Specifies the maximum outbound delay threshold in milliseconds that will cause the probe operation to fail.
adGenAOSnmTwDelayOutMinPass: Specifies the threshold in milliseconds for minimum outbound delay that will allow the probe operation to pass.
adGenAOSnmTwDelayOutAvgPass: Specifies the threshold in milliseconds for average outbound delay that will allow the probe operation to pass.
adGenAOSnmTwDelayOutMaxPass: Specifies the threshold in milliseconds for maximum outbound delay that will allow the probe operation to pass.
adGenAOSnmTwDelayRtMinFail: Specifies the minimum round-trip delay threshold in milliseconds that will cause the probe operation to fail.
adGenAOSnmTwDelayRtAvgFail: Specifies the average round-trip delay threshold in milliseconds that will cause the probe operation to fail.
adGenAOSnmTwDelayRtMaxFail: Specifies the maximum round-trip delay threshold in milliseconds that will cause the probe operation to fail.
adGenAOSnmTwDelayRtMinPass: Specifies the threshold in milliseconds for minimum round-trip delay that will allow the probe operation to pass.
adGenAOSnmTwDelayRtAvgPass: Specifies the threshold in milliseconds for average round-trip delay that will allow the probe operation to pass.
adGenAOSnmTwDelayRtMaxPass: Specifies the threshold in milliseconds for maximum round-trip delay that will allow the probe operation to pass.
adGenAOSnmTwPktRtLossFail: Specifies the round-trip packet-loss threshold in milliseconds that will cause the probe operation to fail.
adGenAOSnmTwPktRtLossPass: Specifies the round-trip packet-loss threshold in milliseconds that will allow the probe operation to change to the pass state.
adGenAOSnmTwHistoryDepth: Specifies the number of probe operation statistic results to keep.
adGenAOSnmTwampHistoryTable: Operation history for a network monitor TWAMP probe.
adGenAOSnmTwampHistoryEntry: The read-only history of a particular network monitor TWAMP probe.
adGenAOSnmTwSeqNum: Along with adGenAOSnmTwHistoryName, uniquely identifies a row in the adGenAOSTwampHistoryTable. A sequence number of '1' signifies the current history entry.
adGenAOSnmTwHistoryName: The name of the corresponding TWAMP probe entry. The probe identified by a particular value of this object is the same probe as identified by the same value as a adGenAOSnmName object instance.
adGenAOSnmTwStartTime: Date and time the probe operation started.
adGenAOSnmTwEndTime: Date and time the probe operation ended.
adGenAOSnmTwLocalSyncState: If return value is true, local clock is in sync.
adGenAOSnmTwLocalClkErr: Local clock error estimate in nanoseconds.
adGenAOSnmTwRemoteSyncState: If return value is true, remote clock is in sync.
adGenAOSnmTwRemoteClkErr: Remote clock error estimate in nanoseconds.
adGenAOSnmTwDelayInMin: The inbound minimum delay in milliseconds.
adGenAOSnmTwDelayInMax: The inbound maximum delay in milliseconds.
adGenAOSnmTwDelayOutMin: The outbound minimum delay in milliseconds.
adGenAOSnmTwDelayOutMax: The outbound maximum delay in milliseconds.
adGenAOSnmTwDelayRtMin: The round-trip minimum delay in milliseconds.
adGenAOSnmTwDelayRtMax: The round-trip maximum delay in milliseconds.
adGenAOSnmTwLossRoundTrip: The round-trip packet loss.
adGenAOSnmTwDelayOutSum: The sum of outbound delay in milliseconds.
adGenAOSnmTwDelayOutSum2: The sum of the squares of outbound delay in milliseconds.
adGenAOSnmTwDelayOutNum: The number of individual outbound delay samples.
adGenAOSnmTwDelayInSum: The sum of inbound delay in milliseconds.
adGenAOSnmTwDelayInSum2: The sum of the squares of inbound delay in milliseconds.
adGenAOSnmTwDelayInNum: The number of individual inbound delay samples.
adGenAOSnmTwDelayRtSum: The sum of round-trip delay in milliseconds.
adGenAOSnmTwDelayRtSum2: The sum of the squares of round-trip delay in milliseconds.
adGenAOSnmTwDelayRtNum: The number of individual round-trip delay samples.
adGenAOSnmTwIpvPosInMin: The minimum value in the set of positive inbound inter-packet delay variation measurements.
adGenAOSnmTwIpvPosInMax: The maximum value in the set of positive inbound inter-packet delay variation measurements.
adGenAOSnmTwIpvPosInSum: The sum of positive inbound inter-packet delay variation measurements.
adGenAOSnmTwIpvPosInSum2: The sum of the squares of positive inbound inter-packet delay variation measurements.
adGenAOSnmTwIpvPosInNum: The number of positive inbound inter-packet delay variation measurements.
adGenAOSnmTwIpvPosOutMin: The minimum value in the set of positive outbound inter-packet delay variation measurements.
adGenAOSnmTwIpvPosOutMax: The maximum value in the set of positive outbound inter-packet delay variation measurements.
adGenAOSnmTwIpvPosOutSum: The sum of positive outbound inter-packet delay variation measurements.
adGenAOSnmTwIpvPosOutSum2: The sum of the squares of positive outbound inter-packet delay variation measurements.
adGenAOSnmTwIpvPosOutNum: The number of positive outbound inter-packet delay variation measurements.
adGenAOSnmTwIpvPosRtMin: The minimum value in the set of positive round-trip inter-packet delay variation measurements.
adGenAOSnmTwIpvPosRtMax: The maximum value in the set of positive round-trip inter-packet delay variation measurements.
adGenAOSnmTwIpvPosRtSum: The sum of positive round-trip inter-packet delay variation measurements.
adGenAOSnmTwIpvPosRtSum2: The sum of the squares of of positive round-trip inter-packet delay variation measurements.
adGenAOSnmTwIpvPosRtNum: The number of positive round-trip inter-packet delay variation measurements.
adGenAOSnmTwIpvNegInMin: The minimum value in the set of negative inbound inter-packet delay variation measurements.
adGenAOSnmTwIpvNegInMax: The maximum value in the set of negative inbound inter-packet delay variation measurements.
adGenAOSnmTwIpvNegInSum: The sum of negative inbound inter-packet delay variation measurements.
adGenAOSnmTwIpvNegInSum2: The sum of the squares of negative inbound inter-packet delay variation measurements.
adGenAOSnmTwIpvNegInNum: The number of negative inbound inter-packet delay variation measurements.
adGenAOSnmTwIpvNegOutMin: The minimum value in the set of negative outbound inter-packet delay variation measurements.
adGenAOSnmTwIpvNegOutMax: The maximum value in the set of negative outbound inter-packet delay variation measurements.
adGenAOSnmTwIpvNegOutSum: The sum of negative outbound inter-packet delay variation measurements.
adGenAOSnmTwIpvNegOutSum2: The sum of the squares of negative outbound inter-packet delay variation measurements.
adGenAOSnmTwIpvNegOutNum: The number of negative outbound inter-packet delay variation measurements.
adGenAOSnmTwIpvNegRtMin: The minimum value in the set of negative round-trip inter-packet delay variation measurements.
adGenAOSnmTwIpvNegRtMax: The maximum value in the set of negative round-trip inter-packet delay variation measurements.
adGenAOSnmTwIpvNegRtSum: The sum of negative round-trip inter-packet delay variation measurements.
adGenAOSnmTwIpvNegRtSum2: The sum of the squares of negative round-trip inter-packet delay variation measurements.
adGenAOSnmTwIpvNegRtNum: The number of negative round-trip inter-packet delay variation measurements.
adGenAOSnmTwIpvAbsInMin: The minimum value in the set of absolute inbound inter-packet delay variation measurements.
adGenAOSnmTwIpvAbsInMax: The maximum value in the set of absolute inbound inter-packet delay variation measurements.
adGenAOSnmTwIpvAbsInSum: The sum of absolute inbound inter-packet delay variation measurements.
adGenAOSnmTwIpvAbsInSum2: The sum of the squares of absolute inbound inter-packet delay variation measurements.
adGenAOSnmTwIpvAbsInNum: The number of absolute inbound inter-packet delay variation measurements.
adGenAOSnmTwIpvAbsOutMin: The minimum value in the set of absolute outbound inter-packet delay variation measurements.
adGenAOSnmTwIpvAbsOutMax: The maximum value in the set of absolute outbound inter-packet delay variation measurements.
adGenAOSnmTwIpvAbsOutSum: The sum of absolute outbound inter-packet delay variation measurements.
adGenAOSnmTwIpvAbsOutSum2: The sum of the squares of absolute outbound inter-packet delay variation measurements.
adGenAOSnmTwIpvAbsOutNum: The number of absolute outbound inter-packet delay variation measurements.
adGenAOSnmTwIpvAbsRtMin: The minimum value in the set of absolute round-trip inter-packet delay variation measurements.
adGenAOSnmTwIpvAbsRtMax: The maximum value in the set of absolute round-trip inter-packet delay variation measurements.
adGenAOSnmTwIpvAbsRtSum: The sum of absolute round-trip inter-packet delay variation measurements.
adGenAOSnmTwIpvAbsRtSum2: The sum of the squares of absolute round-trip inter-packet delay variation measurements.
adGenAOSnmTwIpvAbsRtNum: The number of absolute round-trip inter-packet delay variation measurements.
adGenAOSnmTwPktSentCount: The number of packets sent.
adGenAOSnmCfgICMPTSProbeTable: Configure a network monitor ICMP timestamp probe.
adGenAOSnmCfgICMPTSProbeEntry: The parameters used to configure a particular network monitor ICMP timestamp probe.
adGenAOSnmCfgICMPTSName: The name of the corresponding ICMP timestamp probe entry. The probe identified by a particular value of this object is the same probe as identified by the same value as a adGenAOSnmName object instance.
adGenAOSnmICMPTSDestHostname: Specifies the destination hostname or IP address as a string in dotted decimal format.
adGenAOSnmICMPTSSrcIP: Specifies the source IPv4 address.
adGenAOSnmICMPTSDscp: Specifies the DiffServ Code Point value that will be used on packets sent and will be negotiated with the responder.
adGenAOSnmICMPTSPaddingLen: Size of ICMP padding length.
adGenAOSnmICMPTSPaddingFormat: Specifies the format of the padding pattern.
adGenAOSnmICMPTSPaddingPattern: Specifies data pattern to pad the packet. This can be an ascii or hexadecimal pattern and must match the type set in adGenAOSnmICMPTSPktFormat. In addition, adGenAOSnmICMPTSDataPadType must be set to 'custom'.
adGenAOSnmICMPTSDataPadType: Specifies how the ICMP padding paylod is filled.
adGenAOSnmICMPTSPktSendCnt: Specifies the number of packets to send and receive for one probe operation. More than one is required for inter-packet delay variation measurements.
adGenAOSnmICMPTSSendScheduleType: Specifies in milliseconds the time between test packets during a single probe operation.
adGenAOSnmICMPTSSendScheduleValue: Specifies in milliseconds the time between start of each packet send operation.
adGenAOSnmICMPTSIpdvAbsInMinFail: Specifies the minimum inbound absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail.
adGenAOSnmICMPTSIpdvAbsInAvgFail: Specifies the average inbound absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail.
adGenAOSnmICMPTSIpdvAbsInMaxFail: Specifies the maximum inbound absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail.
adGenAOSnmICMPTSIpdvAbsInMinPass: Specifies the threshold in milliseconds for minimum inbound absolute-value inter-packet delay variation that will allow the probe operation to pass.
adGenAOSnmICMPTSIpdvAbsInAvgPass: Specifies the threshold in milliseconds for average inbound absolute-value inter-packet delay variation that will allow the probe operation to pass.
adGenAOSnmICMPTSIpdvAbsInMaxPass: Specifies the threshold in milliseconds for maximum inbound absolute-value inter-packet delay variation that will allow the probe operation to pass.
adGenAOSnmICMPTSIpdvAbsOutMinFail: Specifies the minimum outbound absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail.
adGenAOSnmICMPTSIpdvAbsOutAvgFail: Specifies the average outbound absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail.
adGenAOSnmICMPTSIpdvAbsOutMaxFail: Specifies the maximum outbound absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail.
adGenAOSnmICMPTSIpdvAbsOutMinPass: Specifies the threshold in milliseconds for minimum outbound absolute-value inter-packet delay variation that will allow the probe operation to pass.
adGenAOSnmICMPTSIpdvAbsOutAvgPass: Specifies the threshold in milliseconds for average outbound absolute-value inter-packet delay variation that will allow the probe operation to pass.
adGenAOSnmICMPTSIpdvAbsOutMaxPass: Specifies the threshold in milliseconds for maximum outbound absolute-value inter-packet delay variation that will allow the probe operation to pass.
adGenAOSnmICMPTSIpdvAbsRtMinFail: Specifies the minimum round-trip absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail.
adGenAOSnmICMPTSIpdvAbsRtAvgFail: Specifies the average round-trip absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail.
adGenAOSnmICMPTSIpdvAbsRtMaxFail: Specifies the maximum round-trip absolute-value inter-packet delay variation threshold in milliseconds that will cause the probe operation to fail.
adGenAOSnmICMPTSIpdvAbsRtMinPass: Specifies the threshold in milliseconds for minimum round-trip absolute-value inter-packet delay variation that will allow the probe operation to pass.
adGenAOSnmICMPTSIpdvAbsRtAvgPass: Specifies the threshold in milliseconds for average round-trip absolute-value inter-packet delay variation that will allow the probe operation to pass.
adGenAOSnmICMPTSIpdvAbsRtMaxPass: Specifies the threshold in milliseconds for maximum round-trip absolute-value inter-packet delay variation that will allow the probe operation to pass.
adGenAOSnmICMPTSDelayInMinFail: Specifies the minimum inbound delay threshold in milliseconds that will cause the probe operation to fail.
adGenAOSnmICMPTSDelayInAvgFail: Specifies the average inbound delay threshold in milliseconds that will cause the probe operation to fail.
adGenAOSnmICMPTSDelayInMaxFail: Specifies the maximum inbound delay threshold in milliseconds that will cause the probe operation to fail.
adGenAOSnmICMPTSDelayInMinPass: Specifies the threshold in milliseconds for minimum inbound delay that will allow the probe operation to pass.
adGenAOSnmICMPTSDelayInAvgPass: Specifies the threshold in milliseconds for average inbound delay that will allow the probe operation to pass.
adGenAOSnmICMPTSDelayInMaxPass: Specifies the threshold in milliseconds for maximum inbound delay that will allow the probe operation to pass.
adGenAOSnmICMPTSDelayOutMinFail: Specifies the minimum outbound delay threshold in milliseconds that will cause the probe operation to fail.
adGenAOSnmICMPTSDelayOutAvgFail: Specifies the average outbound delay threshold in milliseconds that will cause the probe operation to fail.
adGenAOSnmICMPTSDelayOutMaxFail: Specifies the maximum outbound delay threshold in milliseconds that will cause the probe operation to fail.
adGenAOSnmICMPTSDelayOutMinPass: Specifies the threshold in milliseconds for minimum outbound delay that will allow the probe operation to pass.
adGenAOSnmICMPTSDelayOutAvgPass: Specifies the threshold in milliseconds for average outbound delay that will allow the probe operation to pass.
adGenAOSnmICMPTSDelayOutMaxPass: Specifies the threshold in milliseconds for maximum outbound delay that will allow the probe operation to pass.
adGenAOSnmICMPTSDelayRtMinFail: Specifies the minimum round-trip delay threshold in milliseconds that will cause the probe operation to fail.
adGenAOSnmICMPTSDelayRtAvgFail: Specifies the average round-trip delay threshold in milliseconds that will cause the probe operation to fail.
adGenAOSnmICMPTSDelayRtMaxFail: Specifies the maximum round-trip delay threshold in milliseconds that will cause the probe operation to fail.
adGenAOSnmICMPTSDelayRtMinPass: Specifies the threshold in milliseconds for minimum round-trip delay that will allow the probe operation to pass.
adGenAOSnmICMPTSDelayRtAvgPass: Specifies the threshold in milliseconds for average round-trip delay that will allow the probe operation to pass.
adGenAOSnmICMPTSDelayRtMaxPass: Specifies the threshold in milliseconds for maximum round-trip delay that will allow the probe operation to pass.
adGenAOSnmICMPTSPktRtLossFail: Specifies the round-trip packet-loss threshold in milliseconds that will cause the probe operation to fail.
adGenAOSnmICMPTSPktRtLossPass: Specifies the round-trip packet-loss threshold in milliseconds that will allow the probe operation to change to the pass state.
adGenAOSnmICMPTSHistoryDepth: Specifies the number of probe operation statistic results to keep.
adGenAOSnmICMPTSHistoryTable: Operation history for a network monitor ICMP timestamp probe.
adGenAOSnmICMPTSHistoryEntry: The read-only history of a particular network monitor ICMP timestamp probe.
adGenAOSnmICMPTSSeqNum: Along with adGenAOSnmICMPTSHistoryName, uniquely identifies a row in the adGenAOSnmICMPTSHistoryTable. A sequence number of '1' signifies the current history entry.
adGenAOSnmICMPTSHistoryName: The name of the corresponding ICMP timestamp probe entry. The probe identified by a particular value of this object is the same probe as identified by the same value as a adGenAOSnmName object instance.
adGenAOSnmICMPTSStartTime: The date and time the probe operation started.
adGenAOSnmICMPTSEndTime: The date and time the probe operation ended.
adGenAOSnmICMPTSDelayInMin: The inbound minimum delay in milliseconds.
adGenAOSnmICMPTSDelayInMax: The inbound maximum delay in milliseconds.
adGenAOSnmICMPTSDelayOutMin: The outbound minimum delay in milliseconds.
adGenAOSnmICMPTSDelayOutMax: The outbound maximum delay in milliseconds.
adGenAOSnmICMPTSDelayRtMin: The round-trip minimum delay in milliseconds.
adGenAOSnmICMPTSDelayRtMax: The round-trip maximum delay in milliseconds.
adGenAOSnmICMPTSLossRoundTrip: The round-trip packet loss.
adGenAOSnmICMPTSDelayOutSum: The sum of outbound delay in milliseconds.
adGenAOSnmICMPTSDelayOutSum2: The sum of the squares of outbound delay in milliseconds.
adGenAOSnmICMPTSDelayOutNum: The number of individual outbound delay samples.
adGenAOSnmICMPTSDelayInSum: The sum of inbound delay in milliseconds.
adGenAOSnmICMPTSDelayInSum2: The sum of the squares of inbound delay in milliseconds.
adGenAOSnmICMPTSDelayInNum: The number of individual inbound delay samples.
adGenAOSnmICMPTSDelayRtSum: The sum of round-trip delay in milliseconds.
adGenAOSnmICMPTSDelayRtSum2: The sum of the squares of round-trip delay in milliseconds.
adGenAOSnmICMPTSDelayRtNum: The number of individual round-trip delay samples.
adGenAOSnmICMPTSIpvPosInMin: The minimum value in the set of positive inbound inter-packet delay variation measurements.
adGenAOSnmICMPTSIpvPosInMax: The maximum value in the set of positive inbound inter-packet delay variation measurements.
adGenAOSnmICMPTSIpvPosInSum: The sum of positive inbound inter-packet delay variation measurements.
adGenAOSnmICMPTSIpvPosInSum2: The sum of the squares of positive inbound inter-packet delay variation measurements.
adGenAOSnmICMPTSIpvPosInNum: The number of positive inbound inter-packet delay variation measurements.
adGenAOSnmICMPTSIpvPosOutMin: The minimum value in the set of positive outbound inter-packet delay variation measurements.
adGenAOSnmICMPTSIpvPosOutMax: The maximum value in the set of positive outbound inter-packet delay variation measurements.
adGenAOSnmICMPTSIpvPosOutSum: The sum of positive outbound inter-packet delay variation measurements.
adGenAOSnmICMPTSIpvPosOutSum2: The sum of the squares of positive outbound inter-packet delay variation measurements.
adGenAOSnmICMPTSIpvPosOutNum: The number of positive outbound inter-packet delay variation measurements.
adGenAOSnmICMPTSIpvPosRtMin: The minimum value in the set of positive round-trip inter-packet delay variation measurements.
adGenAOSnmICMPTSIpvPosRtMax: The maximum value in the set of positive round-trip inter-packet delay variation measurements.
adGenAOSnmICMPTSIpvPosRtSum: The sum of positive round-trip inter-packet delay variation measurements.
adGenAOSnmICMPTSIpvPosRtSum2: The sum of the squares of positive round-trip inter-packet delay variation measurements.
adGenAOSnmICMPTSIpvPosRtNum: The number of positive round-trip inter-packet delay variation measurements.
adGenAOSnmICMPTSIpvNegInMin: The minimum value in the set of negative inbound inter-packet delay variation measurements.
adGenAOSnmICMPTSIpvNegInMax: The maximum value in the set of negative inbound inter-packet delay variation measurements.
adGenAOSnmICMPTSIpvNegInSum: The sum of negative inbound inter-packet delay variation measurements.
adGenAOSnmICMPTSIpvNegInSum2: The sum of the squares of negative inbound inter-packet delay variation measurements.
adGenAOSnmICMPTSIpvNegInNum: The number of negative inbound inter-packet delay variation measurements.
adGenAOSnmICMPTSIpvNegOutMin: The minimum value in the set of negative outbound inter-packet delay variation measurements.
adGenAOSnmICMPTSIpvNegOutMax: The maximum value in the set of negative outbound inter-packet delay variation measurements.
adGenAOSnmICMPTSIpvNegOutSum: The sum of negative outbound inter-packet delay variation measurements.
adGenAOSnmICMPTSIpvNegOutSum2: The sum of the squares of negative outbound inter-packet delay variation measurements.
adGenAOSnmICMPTSIpvNegOutNum: The number of negative outbound inter-packet delay variation measurements.
adGenAOSnmICMPTSIpvNegRtMin: The minimum value in the set of negative round-trip inter-packet delay variation measurements.
adGenAOSnmICMPTSIpvNegRtMax: The maximum value in the set of negative round-trip inter-packet delay variation measurements.
adGenAOSnmICMPTSIpvNegRtSum: The sum of negative round-trip inter-packet delay variation measurements.
adGenAOSnmICMPTSIpvNegRtSum2: The sum of the squares of negative round-trip inter-packet delay variation measurements.
adGenAOSnmICMPTSIpvNegRtNum: The number of negative round-trip inter-packet delay variation measurements.
adGenAOSnmICMPTSIpvAbsInMin: The minimum value in the set of absolute inbound inter-packet delay variation measurements.
adGenAOSnmICMPTSIpvAbsInMax: The maximum value in the set of absolute inbound inter-packet delay variation measurements.
adGenAOSnmICMPTSIpvAbsInSum: The sum of absolute inbound inter-packet delay variation measurements.
adGenAOSnmICMPTSIpvAbsInSum2: The sum of the squares of absolute inbound inter-packet delay variation measurements.
adGenAOSnmICMPTSIpvAbsInNum: The number of absolute inbound inter-packet delay variation measurements.
adGenAOSnmICMPTSIpvAbsOutMin: The minimum value in the set of absolute outbound inter-packet delay variation measurements.
adGenAOSnmICMPTSIpvAbsOutMax: The maximum value in the set of absolute outbound inter-packet delay variation measurements.
adGenAOSnmICMPTSIpvAbsOutSum: The sum of absolute outbound inter-packet delay variation measurements.
adGenAOSnmICMPTSIpvAbsOutSum2: The sum of the squares of absolute outbound inter-packet delay variation measurements.
adGenAOSnmICMPTSIpvAbsOutNum: The number of absolute outbound inter-packet delay variation measurements.
adGenAOSnmICMPTSIpvAbsRtMin: The minimum value in the set of absolute round-trip inter-packet delay variation measurements.
adGenAOSnmICMPTSIpvAbsRtMax: The maximum value in the set of absolute round-trip inter-packet delay variation measurements.
adGenAOSnmICMPTSIpvAbsRtSum: The sum of absolute round-trip inter-packet delay variation measurements.
adGenAOSnmICMPTSIpvAbsRtSum2: The sum of the squares of absolute round-trip inter-packet delay variation measurements.
adGenAOSnmICMPTSIpvAbsRtNum: The number of absolute round-trip inter-packet delay variation measurements.
adGenAOSnmICMPTSPktSentCount: The number of packets sent.
adGenAOSnmICMPTSResponder: Specifies ability to enable or disable the ICMP Timstamp responder to respond to ICMP timestamp requests.
adGenAOSnmTWAMPResponder: Specifies ability to enable or disable the TWAMP responder to respond to ICMP timestamp requests.
adGenAOSnmICMPTSResponderStatsTable: Operation history for a network monitor ICMP timestamp probe.
adGenAOSnmICMPTSResponderStatsEntry: The read-only statistics of the network monitor ICMP timestamp responder.
adGenAOSnmICMPTSResponderStatsIndex: Uniquely identifies a row in the adGenAOSnmICMPTSResponderStatsTable.
adGenAOSnmICMPTSResponderPacketsReceived: Number of packets received by the responder.
adGenAOSnmICMPTSResponderPacketsSent: Number of packets sent by the responder.
adGenAOSnmClearICMPTSResponderCounters: Clear the counters of the ICMP timestamp responder. This is a write-only variable. A read will result in no action being taken.
adGenAOSnmTwampResponderStatsTable: Operation history for a network monitor TWAMP probe.
adGenAOSnmTwampResponderStatsEntry: The read-only statistics of the network monitor TWAMP responder.
adGenAOSnmTwampResponderStatsIndex: Uniquely identifies a row in the adGenAOSnmTwampResponderStatsTable.
adGenAOSnmTwampResponderPacketsReceived: Number of packets received by the responder.
adGenAOSnmTwampResponderPacketsSent: Number of packets sent by the responder.
adGenAOSnmTwampResponderSessionClosed: Number of responder sessions closed.
adGenAOSnmTwampResponderSessionOpened: Number of responder sessions opened.
adGenAOSnmTwampResponderSessionRejected: Number of responder sessions closed.
adGenAOSnmClearTwampResponderCounters: Clear the counters of the TWAMP responder. This is a write-only variable. A read will result in no action being taken.
adGenAOSnmCfgIEProbeTable: Configure a network monitor ICMP echo probe.
adGenAOSnmCfgIEProbeEntry: The parameters used to configure a particular network monitor ICMP echo probe.
adGenAOSnmCfgIEName: The name of the corresponding ICMP echo probe entry. The probe identified by a particular value of this object is the same probe as identified by the same value as a adGenAOSnmName object instance.
adGenAOSnmIEDestHostname: Specifies the destination hostname or IP address as a string in dotted decimal format.
adGenAOSnmIESrcIP: Specifies the source IPv4 address.
adGenAOSnmIEPacketLength: Length of the ICMP packet.
adGenAOSnmIEPacketPattern: Specifies the hexadecimal pattern for the ICMP packet.
adGenAOSnmProbeTableNextIndexGroup: The object necessary to get the next index for creation of the network monitor probe.
adGenAOSnmProbeGroup: The objects necessary to create the network monitor probe.
adGenAOSnmConfigProbeGroup: The objects necessary to configure the network monitor probe.
adGenAOSnmProbeStatusGroup: Objects designed to assist in retrieving the statistics of the probes.
adGenAOSnmCfgTwampProbeGroup: The objects necessary to configure the network monitor TWAMP probe.
adGenAOSnmTwampHistoryGroup: Objects designed to assist in retrieving the statistics of the TWAMP probe.
adGenAOSnmCfgICMPTSProbeGroup: The objects necessary to configure the network monitor ICMP timestamp probe.
adGenAOSnmICMPTSHistoryGroup: Objects designed to assist in retrieving the statistics of the ICMP timestamp probe.
adGenAOSnmICMPTSResponderGroup: Object designed to assist in changing the state of the ICMP timestamp responder.
adGenAOSnmTWAMPResponderGroup: Object designed to assist in changing the state of the TWAMP responder.
adGenAOSnmICMPTSResponderStatsGroup: Objects designed to assist in retrieving the statistics of the ICMP timestamp responder.
adGenAOSnmTwampResponderStatsGroup: Objects designed to assist in retrieving the statistics of the TWAMP responder.
adGenAOSnmCfgIEProbeGroup: Objects designed to assist in configuring the ICMP echo probe.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list