AGENT-MIB Download

agentMgmtProtocolCapability

The network management protocol(s) supported by this agent.

agentMibCapabilityTable

A list of MIB capability entries supported by this agent.

agentMibCapabilityEntry

A MIB capability entry contains objects describing a particular MIB supported by this agent.

agentMibCapabilityIndex

A list of agentMibCapabilityDescr entries.

agentMibCapabilityDescr

The name of the MIB supported by the agent.

agentMibCapabilityVersion

The version of the MIB specified in this entry.

agentMibCapabilityType

The type of the MIB specified in this entry.

agentStatusConsoleInUse

This indicates whether console is currently in-use.

agentStatusSaveCfg

This indicates the status of the device configuration. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. proceeding(2) - the device configuration is being currently ...

agentStatusFileTransfer

status of firmware download control. If the value is 'other', means never firmware updated since device started up.

agentPORTutilizationTable

This table specifies the current utilization of a specified port.

agentPORTutilizationEntry

A list of information regarding the port utilization function.

agentPORTutilizationProtIndex

This object indicates the module's port number.

agentPORTutilizationTX

The current rate of transmitted frames on the specified port.

agentPORTutilizationRX

The current rate of received frames on the specified port.

agentPORTutilizationUtil

The current percentages regarding port statistics.

agentBscSwFileTable

A list of MIB Basic Config entries supported file Update by this agent.

agentBscSwFileEntry

A basic config entry contains objects describing a particular MIB supported by this agent.

agentBscSwFileIndex

The table index for the file entry

agentBscSwFileDscr

The description for the purpose of the software file in this entry. Note: For system which does not support change of this object, setting value to this object will cause the system to return bad-value error message. ::= { agentBscSwFileEntry 2 } SYNTAX ...

agentBscSwFileTransferType

The channel through which the file will be downloaded or uploaded. Note: For system which does not support all channels, setting value to the unsupported channel will cause the system to return bad-value error message. ::= { agentBscSwFileEntry 4 } SYNTAX ...

agentBscSwFileLocateId

This object describes the type of the file. runtime-code(1), log-file(2), cfg-file(3) Note: For system which does not support change of this object, setting value to this object will cause the system to return bad-value error message. ::= { agentBscSwFile ...

agentSystemReset

This object indicates the agent system reset state. Setting this object to no-reset(4) has no effect. Setting this object to cold-start(2) or warm-start(3) will reset the agent. The agent always returns no-reset(4) when this object is read.

agentRs232PortConfig

This object indicates the RS-232C mode while device restart.

agentOutOfBandBaudRateConfig

This object allows user to specify out_of_band baud rate. It will take effect when the system is restart. Note: Because these funiction will be limited by the system support. Some of the select item will invalid. When one of the item user select,it will r ...

agentTrustHostTable

This table contains Trust Host information.

agentTrustHostEntry

A list of information about Trust Host.

agentTrustHostIndex

The index of Trust Host entry.

agentTrustHostIPAddress

Specifies the IP address of the Trust Host.

agentTrustHostRowStatus

Indicates the status of this entry. When creating a Trust Host entry, the IP address should be set, too.

agentTrustHostIPSubnetMask

Specifies the IP subnet mask of the Trust Host.

agentTrustHostDelAllState

Used to delete all Trust Host entries.

agentFDBClearAllState

Used to clear all FDB entries.

agentARPClearAllState

Used to clear all ARP entries.

agentIpNumOfIf

The total number of IP interfaces supported by this agent.

agentIpTftpServerAddr

The IP Address of TFTP Server.

agentIpGetIpFrom

This object indicates whether the agent get its system IP address from Bootp/DHCP server at start up.

agentConsoleModeManagerStopBits

The Stop Bits for console mode

agentConsoleModeManagerParity

The Parity for console mode, If the agentRs232PortConfig change to console mode then the device will use this group to make a setup for console value and agentSlipModeManager group will deactive automatically.

agentConsoleModeManagerBaudRate

The transmit rate for console mode. Note: Because these funiction will be limited by the system support. Some of the select item will invalid. When one of the item user select,it will response with bad-value status. ::= { agentConsoleModeManager 4 } SYNTA ...