ALCATEL-IND1-GROUP-MOBILITY-MIB Download
This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
Group Mobility for dynamic vlan assignment to source learning
entries and ports.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
IPHost Network Monitor offer an easy way of SNMP monitoring your Alcatel Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for ALCATEL-IND1-GROUP-MOBILITY-MIB
- alcatelIND1GroupMobilityMIBObjects
- Branch For Group Mobility Subsystem Managed Objects.
- alcatelIND1GroupMobilityMIBConformance
- Branch For Group Mobility Subsystem Conformance Information.
- alcatelIND1GroupMobilityMIBGroups
- Branch For Group Mobility Subsystem Units Of Conformance.
- alcatelIND1GroupMobilityMIBCompliances
- Branch For Group Mobility Subsystem Compliance Statements.
- vIpNetRuleTable
- A list of IP network address rules.
- vIpNetRuleEntry
- An IP network address rule entry.
- vIpNetRuleAddr
- The IP network address used for VLAN classification.
- vIpNetRuleMask
- The IP network mask applying to the IP network address.
- vIpNetRuleVlanId
- The VLAN number identifying this instance. Valid range from 1 to 4094.
- vIpNetRuleStatus
- Row Status for creating/deleting rules.
- vIpxNetRuleTable
- A list of IPX network address rules.
- vIpxNetRuleEntry
- An IPX network address rule entry.
- vIpxNetRuleAddr
- The IPX network address used for VLAN classification.
- vIpxNetRuleEncap
- IPX frame encapsulation.
- vIpxNetRuleVlanId
- The VLAN number identifying this instance. Valid range from 1 to 4094.
- vIpxNetRuleStatus
- Row Status for creating/deleting rules.
- vMacRuleTable
- A list of MAC address rules.
- vMacRuleEntry
- A MAC rule entry.
- vMacRuleAddr
- The MAC address used for VLAN classification.
- vMacRuleVlanId
- The VLAN number identifying this instance. Valid range from 1 to 4094.
- vMacRuleStatus
- Row Status for creating/deleting rules.
- vMacRangeRuleTable
- A list of MAC range rules.
- vMacRangeRuleEntry
- A MAC range rule entry.
- vMacRangeRuleLoAddr
- The lower bound of MAC address range used for VLAN classification.
- vMacRangeRuleHiAddr
- The upper bound of MAC address range used for VLAN classification.
- vMacRangeRuleVlanId
- The VLAN number identifying this instance. Valid range from 1 to 4094.
- vMacRangeRuleStatus
- Row Status for creating/deleting rules.
- vMacPortIpBRuleTable
- A list of MAC-Port-Ip binding rules.
- vMacPortIpBRuleEntry
- A MAC-Port-IP binding rule entry.
- vMacPortIpBRuleMac
- The MAC address used for binding VLAN classification.
- vMacPortIpBRuleIfIndex
- The ifIndex corresponding to a potentially mobile port.
- vMacPortIpBRuleIp
- The IP address used for binding VLAN classification.
- vMacPortIpBRuleVlanId
- The VLAN number identifying this instance. Valid range from 1 to 4094.
- vMacPortIpBRuleStatus
- Row Status for creating/deleting rules.
- vPortIpBRuleTable
- A list of Port-Ip binding rules.
- vPortIpBRuleEntry
- A Port-IP binding rule entry.
- vPortIpBRuleIp
- The IP address used for binding VLAN classification.
- vPortIpBRuleIfIndex
- The ifIndex corresponding to a potentially mobile port.
- vPortIpBRuleVlanId
- The VLAN number identifying this instance. Valid range from 1 to 4094.
- vPortIpBRuleStatus
- Row Status for creating/deleting rules.
- vMacIpBRuleTable
- A list of Mac-Ip binding rules.
- vMacIpBRuleEntry
- A Mac-IP binding rule entry.
- vMacIpBRuleMac
- The MAC address used for binding VLAN classification.
- vMacIpBRuleIp
- The IP address used for binding VLAN classification.
- vMacIpBRuleVlanId
- The VLAN number identifying this instance. Valid range from 1 to 4094.
- vMacIpBRuleStatus
- Row Status for creating/deleting rules.
- vMacPortBRuleTable
- A list of MAC-Port binding rules.
- vMacPortBRuleEntry
- A MAC-Port binding rule entry.
- vMacPortBRuleMac
- The MAC address used for binding VLAN classification.
- vMacPortBRuleIfIndex
- The ifIndex corresponding to a potentially mobile port.
- vMacPortBRuleVlanId
- The VLAN number identifying this instance. Valid range from 1 to 4094.
- vMacPortBRuleStatus
- Row Status for creating/deleting rules.
- vMacPortProtoBRuleTable
- A list of MAC-Port binding rules.
- vMacPortProtoBRuleEntry
- A MAC-Port binding rule entry.
- vMacPortProtoBRuleMacAddr
- The MAC address used for binding VLAN classification.
- vMacPortProtoBRuleIfIndex
- The ifIndex corresponding to a potentially mobile port.
- vMacPortProtoBRuleProtoClass
- The encoded protocol number used for binding VLAN classification.
- vMacPortProtoBRuleEthertype
- Ethertype value for generic ethertype or snap rule. This value has no meaning for vMacPortProtoBRuleProtoClass set to values other than 9 or 11.
- vMacPortProtoBRuleDsapSsap
- DSAP and SSAP values for generic DSAP/SSAP and SNAP rules. This value has no meaning for vMacPortProtoBRuleProtoClass set to values other than 10.
- vMacPortProtoBRuleVlanId
- The VLAN number identifying this instance. Valid range from 1 to 4094.
- vMacPortProtoBRuleStatus
- Row Status for creating/deleting rules.
- vPortProtoBRuleTable
- A list of Port-Protocol binding rules.
- vPortProtoBRuleEntry
- A Port-Protocol binding rule entry.
- vPortProtoBRuleIfIndex
- The ifIndex corresponding to a potentially mobile port.
- vPortProtoBRuleProtoClass
- The encoded protocol number used for binding VLAN classification.
- vPortProtoBRuleEthertype
- Ethertype value for generic ethertype or snap rule. This value has no meaning for vPortProtoBRuleProtoClass set to values other than 9 or 11.
- vPortProtoBRuleDsapSsap
- DSAP and SSAP values for generic DSAP/SSAP and SNAP rules. This value has no meaning for vPortProtoBRuleProtoClass set to values other than 10.
- vPortProtoBRuleVlanId
- The VLAN number identifying this instance. Valid range from 1 to 4094.
- vPortProtoBRuleStatus
- Row Status for creating/deleting rules.
- vDhcpMacRuleTable
- A list of DHCP MAC address rules.
- vDhcpMacRuleEntry
- A DHCP MAC rule entry.
- vDhcpMacRuleAddr
- The DHCP MAC address used for VLAN classification.
- vDhcpMacRuleVlanId
- The VLAN number identifying this instance. Valid range from 1 to 4094.
- vDhcpMacRuleStatus
- Row Status for creating/deleting rules.
- vDhcpPortRuleTable
- A list of DHCP port rules.
- vDhcpPortRuleEntry
- A MAC rule entry.
- vDhcpPortRuleIfIndex
- The ifIndex corresponding to a potentially mobile port.
- vDhcpPortRuleVlanId
- The VLAN number identifying this instance. Valid range from 1 to 4094.
- vDhcpPortRuleStatus
- Row Status for creating/deleting rules.
- vDhcpGenericRuleTable
- The generic port rule -- in table for uniformity's sake.
- vDhcpGenericRuleEntry
- The DHCP generic rule entry -- there is at most one.
- vDhcpGenericRuleVlanId
- The VLAN number identifying this instance. Valid range from 1 to 4094.
- vDhcpGenericRuleStatus
- Row Status for creating/deleting rules.
- vProtoRuleTable
- A list of Protocol rules.
- vProtoRuleEntry
- A Protocol rule entry.
- vProtoRuleProtoClass
- The encoded protocol number used for binding VLAN classification.
- vProtoRuleEthertype
- Ethertype value for generic ethertype or snap rule. This value has no meaning for vProtoRuleProtoClass set to values other than 9 or 11.
- vProtoRuleDsapSsap
- DSAP and SSAP values for generic DSAP/SSAP and SNAP rules. This value has no meaning for vProtoRuleProtoClass set to values other than 10.
- vProtoRuleVlanId
- The VLAN number identifying this instance. Valid range from 1 to 4094.
- vProtoRuleStatus
- Row Status for creating/deleting rules.
- vCustomRuleTable
- A list of Custom rules.
- vCustomRuleEntry
- A Custom rule entry.
- vCustomRuleValue
- The value to match for VLAN classification.
- vCustomRuleMask
- Mask applied to value for rule matching.
- vCustomRuleOffset
- Location of value to be matched relative to start of frame.
- vCustomRuleVlanId
- The VLAN number identifying this instance. Valid range from 1 to 4094.
- vCustomRuleStatus
- Row Status for creating/deleting rules.
- vPortRuleTable
- A list of Port rules.
- vPortRuleEntry
- A Port rule entry.
- vPortRuleIfIndex
- The ifIndex corresponding to a potentially mobile port.
- vPortRuleVlanId
- The VLAN number identifying this instance. Valid range from 1 to 4094.
- vPortRuleStatus
- Row Status for creating/deleting rules.
- vDhcpMacRangeRuleTable
- A list of DHCP MAC Range address rules.
- vDhcpMacRangeRuleEntry
- A DHCP MAC Range rule entry.
- vDhcpMacRangeRuleLoAddr
- The lower bound of MAC address range used for DHCP VLAN classification.
- vDhcpMacRangeRuleHiAddr
- The higher bound of MAC address range used for DHCP VLAN classification.
- vDhcpMacRangeRuleVlanId
- The VLAN number identifying this instance. Valid range from 1 to 4094.
- vDhcpMacRangeRuleStatus
- Row Status for creating/deleting rules.
- vMobilePortTable
- Controls and reports the mobility status of a port. Also controls and reports other mobility related properties: default vlan permanance, restoration, and enabling; also whether to ignore BPDUs or change the port mode to fixed upon receiving BPDUs; also ...
- vMobilePortEntry
- On a given port indicates mobility related properties.
- vMobilePortIfIndex
- The ifIndex corresponding to a potentially mobile port. Mobile and Fixed ports are potentially mobile ports (of course in the Mobile case, the potential has been realized). Tagged, Aggregable, and Mirroring ports are not potentially mobile ports.
- vMobilePortMobility
- Indicates whether port is mobile (has mobility property). All potentially mobile ports have this property (potentially mobile ports includes both mobile ports and non-mobile fixed ports).
- vMobilePortDefVlanRestore
- Indicates default vlan restore state. There has been a major change to the usage of this element: it now controls whether or not dynamic VPAs will be aged on a mobile port. Restore = enable means that aging is activated; restore = disable means that no ...
- vMobilePortDefVlanEnable
- Indicates default vlan enable state. When enabled, the port is not prevented from forwarding and receiving frames in the default vlan as appropriate. When disabled, the port is prevented from forwarding and receiving frames in the default vlan. Non-mobil ...
- vMobilePortIgnoreBPDU
- Indicates whether BPDUs should be ignored on port. This is normally disabled -- BPDUs are not ignored but cause the port to lose its mobility property (it becomes a fixed port instead). Non-mobile ports that are potentially mobile do not have this proper ...
- vMobilePortAuthenticate
- Identifies a mobile port as being an authenticated port also. A non-mobile port cannot be an authenticated port at this point. Non-mobile ports that are potentially mobile do not have this property - a get returns notApplicable.
- vMobilePortCfgDefVlan
- The configured default vlan on this port.
- gmBindRuleType
- Type of binding rule for which trap sent.
- gmBindRuleVlanId
- Binding Rule VLAN Id.
- gmBindRuleIPAddress
- BInding Rule IP address.
- gmBindRuleMacAddress
- Binding Rule Mac Address
- gmBindRulePortIfIndex
- The ifIndex corresponding to the mobile port on which binding rule violation occured.
- gmBindRuleProtoClass
- The encoded protocol number used for binding VLAN classification.
- gmBindRuleEthertype
- Ethertype value for generic ethertype or snap rule. This value has no meaning for vProtoRuleProtoClass set to values other than 9 or 11.
- gmBindRuleDsapSsap
- DSAP and SSAP values for generic DSAP/SSAP and SNAP rules. This value has no meaning for vProtoRuleProtoClass set to values other than 10.
- groupMobilityRuleGroup
- Collection of objects for management of Group Mobility vlan classification rules.
- groupMobilityPortGroup
- Collection of objects for management of Mobile Ports.
