ALCATEL-IND1-PCAM-MIB Download
This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
This MIB contains management information for Coronado Layer
3 Hardware Routing Engine (HRE) management.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
IPHost Network Monitor offer an easy way of SNMP monitoring your Alcatel Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for ALCATEL-IND1-PCAM-MIB
- alcatelIND1PCAMMIBObjects
- Branch for Coronado Layer 3 HRE Managed Objects.
- alcatelIND1PCAMMIBConformance
- Branch for Coronado Layer 3 HRE Conformance Information.
- alcatelIND1PCAMMIBGroups
- Branch for Coronado Layer 3 HRE Units of Conformance.
- alcatelIND1PCAMMIBCompliances
- Branch for Coronado Layer 3 HRE Compliance Statements.
- alaCoroL3HrePerModeTable
- The statistics and configurable data for a Coronado L3 HRE mode.
- alaCoroL3HrePerModeTableEntry
- Each entry corresponds to a single mode for a single Coronado.
- alaCoroL3HrePerModeSlotNumber
- will vary depending on hardware configuration.
- alaCoroL3HrePerModeSliceNumber
- will vary depending on hardware configuration.
- alaCoroL3HrePerModeModeNumber
- data used for modes 3 through 5 since they share hash function and memory space.
- alaCoroL3HreModeHashTableSize
- be 0 or a power of 2.
- alaCoroL3HreModeHashEntriesInUse
- Number of hash buckets currently in use for this mode.
- alaCoroL3HreModeCollEntriesInUse
- Number of collision entries in use by this mode.
- alaCoroL3HreModeCurrentHashFunction
- Current hash function in use by this mode.
- alaCoroL3HreMaxCollChainLen
- Maximum length for the collision chains in this mode.
- alaCoroL3HreAvgCollChainLen
- Average length for the collision chains in this mode.
- alaCoroL3HrePerCoronadoStatsTable
- The statistics for a Coronado L3 HRE.
- alaCoroL3HrePerCoronadoStatsTableEntry
- Each entry corresponds to a single Coronado.
- alaCoroL3HreSlotNumber
- will vary depending on hardware configuration.
- alaCoroL3HreSliceNumber
- will vary depending on hardware configuration.
- alaCoroL3HreRouteCacheEntriesTotal
- Total number of configured route cache entries.
- alaCoroL3HreRouteCacheEntriesInUse
- Number of route cache entries currently in-use.
- alaCoroL3HreIpPacketsReceived
- Number of IP packets received.
- alaCoroL3HreIpBytesReceived
- Number of IP bytes received.
- alaCoroL3HreIpPacketsForwarded
- Number of IP packets routed.
- alaCoroL3HreIpBytesForwarded
- Number of IP bytes routed.
- alaCoroL3HreIpPacketsDiscarded
- Number of IP packets discarded.
- alaCoroL3HreIpBytesDiscarded
- Number of IP bytes discarded.
- alaCoroL3HreIpPacketsFragmented
- Number of IP packets fragmented.
- alaCoroL3HreIpPacketsFragsGenerated
- Number of IP packet fragments generated.
- alaCoroL3HreIpPacketsFailedToFrag
- because IP flag precluded it.
- alaCoroL3HreIpxPacketsReceived
- Number of IPX packets received.
- alaCoroL3HreIpxBytesReceived
- Number of IPX bytes received.
- alaCoroL3HreIpxPacketsForwarded
- Number of IPX packets routed.
- alaCoroL3HreIpxBytesForwarded
- Number of IPX bytes routed.
- alaCoroL3HreIpxPacketsDiscarded
- Number of IPX packets discarded.
- alaCoroL3HreIpxBytesDiscarded
- Number of IPX bytes discarded.
- alaCoroL3HreUpdateChanges
- cleared.
- alaCoroL3HreChangeTable
- The statistics and configurable data for a Coronado L3 HRE mode.
- alaCoroL3HreChangeTableEntry
- Each entry corresponds to a single mode for a single Coronado.
- alaCoroL3HreChangeSlotNumber
- will vary depending on hardware configuration.
- alaCoroL3HreChangeSliceNumber
- will vary depending on hardware configuration.
- alaCoroL3HreChangeModeNumber
- data used for modes 3 through 5 since they share hash function and memory space.
- alaCoroL3HreChangeHashTableSize
- be 0 or a power of 2.
- alaCoroL3HreChangeHashFunction
- Hash function to be used for this mode.
- alaCoroL3HreChangeClear
- Clears changes for the specified mode.
- alaCoroL3HrePerModeObjects
- A collection of objects providing information for each mode.
- alaCoroL3HrePerCoronadoObjects
- A collection of objects providing information for each Coronado.
- alaCoroL3HreChangeObjects
- A collection of objects providing information for changes to be made.
