APSYSMGMT-MIB Download
The system management MIB for Acme Packet, now includes statistical data for session agents.
With the IPHost SNMP tool, you can monitor any SNMP objects of the
APSYSMGMT-MIB
. You can select a variable to monitor using the built-in IPHost MIB browser that provides you with all variables,
their current values and descriptions taken from the
APSYSMGMT-MIB
.
OID list for APSYSMGMT-MIB
- apSysCPUUtil
- The percentage of total CPU utilization measured in 1 second.
- apSysMemoryUtil
- The percentage of Memory utilization
- apSysHealthScore
- System health percentage. 100, which understands as 100%, is healthiest.
- apSysRedundancy
- In redundancy set, one SD is active, one is standby. If there is no redundancy set, the value is 'other(3)'.
- apSysGlobalConSess
- The total instant number of Global Concurrent Sessions at the moment.
- apSysGlobalCPS
- The number of global call per second. This is an instant value.
- apSysNATCapacity
- The percentage of NAT table (in CAM) utilization.
- apSysARPCapacity
- The percentage of ARP table (in CAM) utilization.
- apSysState
- The current system state. Online denotes regular call processing, while offline implies no call processing but other administrative functions are available.
- apSysLicenseCapacity
- The percentage of licensed sessions currently in progress.
- apSysSipStatsActiveLocalContacts
- Number of current cached registered contacts in the SD.
- apSysMgcpGWEndpoints
- Number of current registered GW endpoints in the SD.
- apSysH323Registration
- Number of H323 registrations in the SD.
- apSysRegCacheLimit
- The maximum number of contacts allowed to be accepted into the registration cache. A value of 0 indicates no limit.
- apSysShortSessionThreshold
- The threshold for which a trap will be emitted when the amount of short sessions exceeds this value.
- apSysApplicationCPULoadRate
- The average load rate of the service applications taken over a period, upto 10 seconds.
- apCombinedSessionAgentStatsTable
- A table to hold statistics information on H323 and sip session agents arranged into rows, indexed by unique integers. These are all read only.
- apCombinedSessionAgentStatsEntry
- A table entry designed to hold statistics, on a single session agent
- apCombinedStatsSessionAgentIndex
- A monotonically increasing integer for the sole purpose of indexing session agents. When it reaches the maximum value the agent wraps the value back to 1.
- apCombinedStatsSessionAgentHostname
- The hostname of the session agent the following statistics are being calculated for
- apCombinedStatsSessionAgentType
- The type of the specified Session-Agent, can be either sip or h323
- apCombinedStatsCurrentActiveSessionsInbound
- Number of current active inbound sessions
- apCombinedStatsCurrentSessionRateInbound
- Current Inbound Session rate in CPS
- apCombinedStatsCurrentActiveSessionsOutbound
- Number of current active outbound sessions
- apCombinedStatsCurrentSessionRateOutbound
- Current outbound session rate in CPS
- apCombinedStatsTotalSessionsInbound
- Total Number of inbound sessions
- apCombinedStatsTotalSessionsNotAdmittedInbound
- Total number of inbound sessions rejected due to insufficient bandwidth
- apCombinedStatsPeriodHighInbound
- Highest number of concurrent inbound sessions during the period
- apCombinedStatsAverageRateInbound
- Average rate of inbound sessions during the period in CPS
- apCombinedStatsTotalSessionsOutbound
- Total Number of outbound sessions
- apCombinedStatsTotalSessionsNotAdmittedOutbound
- Total number of outbound sessions rejected due to insufficient bandwidth
- apCombinedStatsPeriodHighOutbound
- Highest number of concurrent outbound sessions during the period
- apCombinedStatsAverageRateOutbound
- Average rate of outbound sessions during the period in CPS
- apCombinedStatsMaxBurstRate
- Maximum burst rate of traffic measured during the period (combined inbound and outbound)
- apCombinedStatsPeriodSeizures
- Total number of seizures during the period
- apCombinedStatsPeriodAnswers
- Total number of answered sessions during the period
- apCombinedStatsPeriodASR
- The answer-to-seizure ratio, expressed as a percentage. For example, a value of 90 would represent 90%, or .90
- apCombinedStatsAverageLatency
- Average observed one-way signalling latency during the period in milliseconds
- apCombinedStatsMaxLatency
- Maximum observed one-way signalling latency during the period in milliseconds
- apCombinedStatsSessionAgentStatus
- The current status of the specified session agent, which is expressed as INS, OOSnonresp, OOSconstraintsviolation, BecomingOOS, or ForcedOOS
- apSipSessionAgentStatsTable
- A table to hold statistics information on SIP session agents arranged into rows, indexed by unique integers. These are all read only.
- apSipSessionAgentStatsEntry
- A table entry designed to hold statistics, on a single session agent
- apSipSAStatsSessionAgentIndex
- A monotonically increasing integer for the sole purpose of indexing session agents. When it reaches the maximum value the agent wraps the value back to 1.
- apSipSAStatsSessionAgentHostname
- The hostname of the session agent the following statistics are being calculated for
- apSipSAStatsSessionAgentType
- The type of the specified Session-Agent, can be either sip or h323
- apSipSAStatsCurrentActiveSessionsInbound
- Number of current active inbound sessions
- apSipSAStatsCurrentSessionRateInbound
- Current Inbound Session rate in CPS
- apSipSAStatsCurrentActiveSessionsOutbound
- Number of current active outbound sessions
- apSipSAStatsCurrentSessionRateOutbound
- Current outbound session rate in CPS
- apSipSAStatsTotalSessionsInbound
- Total Number of inbound sessions
- apSipSAStatsTotalSessionsNotAdmittedInbound
- Total number of inbound sessions rejected due to insufficient bandwidth
- apSipSAStatsPeriodHighInbound
- Highest number of concurrent inbound sessions during the period
- apSipSAStatsAverageRateInbound
- Average rate of inbound sessions during the period in CPS
- apSipSAStatsTotalSessionsOutbound
- Total Number of outbound sessions
- apSipSAStatsTotalSessionsNotAdmittedOutbound
- Total number of outbound sessions rejected due to insufficient bandwidth
- apSipSAStatsPeriodHighOutbound
- Highest number of concurrent outbound sessions during the period
- apSipSAStatsAverageRateOutbound
- Average rate of outbound sessions during the period in CPS
- apSipSAStatsMaxBurstRate
- Maximum burst rate of traffic measured during the period (combined inbound and outbound)
- apSipSAStatsPeriodSeizures
- Total number of seizures during the period
- apSipSAStatsPeriodAnswers
- Total number of answered sessions during the period
- apSipSAStatsPeriodASR
- The answer-to-seizure ratio, expressed as a percentage. For example, a value of 90 would represent 90%, or .90
- apSipSAStatsAverageLatency
- Average observed one-way signalling latency during the period in milliseconds
- apSipSAStatsMaxLatency
- Maximum observed one-way signalling latency during the period in milliseconds
- apSipSAStatsSessionAgentStatus
- The current status of the specified session agent, which is expressed as INS, OOSnonresp, OOSconstraintsviolation, BecomingOOS, or ForcedOOS
- apH323SessionAgentStatsTable
- A table to hold statistics information on H323 session agents arranged into rows, indexed by unique integers. These are all read only.
- apH323SessionAgentStatsEntry
- A table entry designed to hold statistics, on a single session agent
- apH323SAStatsSessionAgentIndex
- A monotonically increasing integer for the sole purpose of indexing session agents. When it reaches the maximum value the agent wraps the value back to 1.
- apH323SAStatsSessionAgentHostname
- The hostname of the session agent the following statistics are being calculated for
- apH323SAStatsSessionAgentType
- The type of the specified Session-Agent, can be either sip or h323
- apH323SAStatsCurrentActiveSessionsInbound
- Number of current active inbound sessions
- apH323SAStatsCurrentSessionRateInbound
- Current Inbound Session rate in CPS
- apH323SAStatsCurrentActiveSessionsOutbound
- Number of current active outbound sessions
- apH323SAStatsCurrentSessionRateOutbound
- Current outbound session rate in CPS
- apH323SAStatsTotalSessionsInbound
- Total Number of inbound sessions
- apH323SAStatsTotalSessionsNotAdmittedInbound
- Total number of inbound sessions rejected due to insufficient bandwidth
- apH323SAStatsPeriodHighInbound
- Highest number of concurrent inbound sessions during the period
- apH323SAStatsAverageRateInbound
- Average rate of inbound sessions during the period in CPS
- apH323SAStatsTotalSessionsOutbound
- Total Number of outbound sessions
- apH323SAStatsTotalSessionsNotAdmittedOutbound
- Total number of outbound sessions rejected due to insufficient bandwidth
- apH323SAStatsPeriodHighOutbound
- Highest number of concurrent outbound sessions during the period
- apH323SAStatsAverageRateOutbound
- Average rate of outbound sessions during the period in CPS
- apH323SAStatsMaxBurstRate
- Maximum burst rate of traffic measured during the period (combined inbound and outbound)
- apH323SAStatsPeriodSeizures
- Total number of seizures during the period
- apH323SAStatsPeriodAnswers
- Total number of answered sessions during the period
- apH323SAStatsPeriodASR
- The answer-to-seizure ratio, expressed as a percentage. For example, a value of 90 would represent 90%, or .90
- apH323SAStatsAverageLatency
- Average observed one-way signalling latency during the period in milliseconds
- apH323SAStatsMaxLatency
- Maximum observed one-way signalling latency during the period in milliseconds
- apH323SAStatsSessionAgentStatus
- The current status of the specified session agent, which is expressed as INS, OOSnonresp, OOSconstraintsviolation, BecomingOOS, or ForcedOOS
- apSigRealmStatsTable
- A table to hold statistics information on realms arranged into rows, indexed by unique integers. These are all read only.
- apSigRealmStatsEntry
- A table entry designed to hold statistics, on a single realm
- apSigRealmStatsRealmIndex
- A monotonically increasing integer for the sole purpose of indexing realms. When it reaches the maximum value the agent wraps the value back to 1.
- apSigRealmStatsRealmName
- The name of the realm the following statistics are being calculated for
- apSigRealmStatsCurrentActiveSessionsInbound
- Number of current active inbound sessions
- apSigRealmStatsCurrentSessionRateInbound
- Current Inbound Session rate in CPS
- apSigRealmStatsCurrentActiveSessionsOutbound
- Number of current active outbound sessions
- apSigRealmStatsCurrentSessionRateOutbound
- Current outbound session rate in CPS
- apSigRealmStatsTotalSessionsInbound
- Total Number of inbound sessions
- apSigRealmStatsTotalSessionsNotAdmittedInbound
- Total number of inbound sessions rejected due to insufficient bandwidth
- apSigRealmStatsPeriodHighInbound
- Highest number of concurrent inbound sessions during the period
- apSigRealmStatsAverageRateInbound
- Average rate of inbound sessions during the period in CPS
- apSigRealmStatsTotalSessionsOutbound
- Total Number of outbound sessions
- apSigRealmStatsTotalSessionsNotAdmittedOutbound
- Total number of outbound sessions rejected due to insufficient bandwidth
- apSigRealmStatsPeriodHighOutbound
- Highest number of concurrent outbound sessions during the period
- apSigRealmStatsAverageRateOutbound
- Average rate of outbound sessions during the period in CPS
- apSigRealmStatsMaxBurstRate
- Maximum burst rate of traffic measured during the period (combined inbound and outbound)
- apSigRealmStatsPeriodSeizures
- Total number of seizures during the period
- apSigRealmStatsPeriodAnswers
- Total number of answered sessions during the period
- apSigRealmStatsPeriodASR
- The answer-to-seizure ratio, expressed as a percentage. For example, a value of 90 would represent 90%, or .90
- apSigRealmStatsAverageLatency
- Average observed one-way signalling latency during the period in milliseconds
- apSigRealmStatsMaxLatency
- Maximum observed one-way signalling latency during the period in milliseconds
- apSigRealmStatsMinutesLeft
- The number of monthly-minutes left in the pool per calendar month for a given realm
- apSigRealmStatsMinutesReject
- Peg counts of number of rejected calls due to monthly-minutes constraints exceeded
- apSigRealmStatsShortSessions
- The lifetime number of sessions whose duration was less than the configured short session duration.
- apSigRealmStatsAverageQoSRFactor
- Average QoS RFactor observed during the period
- apSigRealmStatsMaximumQoSRFactor
- Average QoS RFactor observed during the period
- apSigRealmStatsCurrentMajorRFactorExceeded
- Peg counts of number of times the Major Rfactor threshold was exceeded during the period
- apSigRealmStatsTotalMajorRFactorExceeded
- Peg counts of number of times the Major Rfactor threshold was exceeded during the lifetime
- apSigRealmStatsCurrentCriticalRFactorExceeded
- Peg counts of number of times the Critical Rfactor threshold was exceeded during the period
- apSigRealmStatsTotalCriticalRFactorExceeded
- Peg counts of number of times the Critical Rfactor threshold was exceeded during the lifetime
- apSigRealmStatsRealmStatus
- The current status of the specified realm, which is expressed as INS,constraintsviolation, or callLoadReduction
- apNetMgmtCtrlStatsTable
- A table to hold statistics information on network management controls arranged into rows, indexed by unique names of the control rules. These are all read only.
- apNetMgmtCtrlStatsEntry
- A table entry designed to hold statistics, on a single network management control
- apNetMgmtCtrlStatsName
- The name of the network management control the following statistics are being calculated for
- apNetMgmtCtrlStatsType
- The type of the specified network management control, which can be gap-rate, gap-percent or priority
- apNetMgmtCtrlStatsIncomingTotal
- Total number of incoming calls that have matched a destination identifier of the specified network management control
- apNetMgmtCtrlStatsRejectedTotal
- Total number of incoming calls that have been rejected by the specified network management control
- apNetMgmtCtrlStatsDivertedTotal
- Total number of incoming calls that have been diverted by the specified network management control
- apNetMgmtCtrlStatsIncomingCurrent
- Number of incoming calls during the current period that have matched a destination identifier of the specified network management control
- apNetMgmtCtrlStatsRejectedCurrent
- Number of incoming calls during the current period that have been rejected by the specified network management control
- apNetMgmtCtrlStatsDivertedCurrent
- Number of incoming calls during the current period that have been diverted by the specified network management control
- apNetMgmtCtrlStatsIncomingPeriodMax
- Maximum number of incoming calls during a period that have matched a destination identifier of the specified network management control
- apNetMgmtCtrlStatsRejectedPeriodMax
- Maximum number of incoming calls during a period that have been rejected by the specified network management control
- apNetMgmtCtrlStatsDivertedPeriodMax
- Maximum number of incoming calls during a period that have been diverted by the specified network management control
- apENUMServerStatusTable
- A read-only table to hold the status of configured ENUM servers, indexed by the name of the enum server and server IP.
- apENUMServerStatusEntry
- An entry designed to hold the status of a single ENUM server
- apENUMConfigName
- The name of the enum-config element that contains this ENUM server.
- apENUMServerIpAddress
- The IP address of this ENUM server.
- apENUMServerStatus
- The status of this ENUM server.
- apNSEPStatsCurrentActiveSessionsInbound
- Number of current active inbound NS/EP sessions
- apNSEPStatsTotalSessionsInbound
- Total Number of inbound NS/EP sessions during the period
- apNSEPStatsPeriodHighInbound
- Highest number of concurrent inbound NS/EP sessions during the period
- apNSEPStatsPeriod
- The period for which the stats are collected in secs
- apNSEPStatsRPHTable
- A table to hold statistics information on NS/EP sessions arranged into rows, indexed by unique RPH values (namespace.rpriority) These are all read only.
- apNSEPStatsRPHEntry
- A table entry designed to hold statistics, on a single RPH value
- apNSEPStatsRPHValue
- The RPH Value the following statistics are being calculated for
- apNSEPStatsRPHCurrentActiveSessionsInbound
- Number of current active inbound NS/EP sessions
- apNSEPStatsRPHTotalSessionsInbound
- Total Number of inbound NS/EP sessions during the period
- apNSEPStatsRPHPeriodHighInbound
- Highest number of concurrent inbound NS/EP sessions during the period
- apNSEPStatsRPHTotalSessionsNotAdmittedInbound
- Total number of inbound NS/EP sessions rejected
- apNSEPStatsRPHCurrentActiveSessionsOutbound
- Number of current active outbound NS/EP sessions
- apNSEPStatsRPHTotalSessionsOutbound
- Total Number of outbound NS/EP sessions during the period
- apNSEPStatsRPHPeriodHighOutbound
- Highest number of concurrent outbound NS/EP sessions during the period
- apNSEPStatsRPHTotalSessionsNotAdmittedOutbound
- Total number of outbound NS/EP sessions rejected
- apLDAPServerStatusTable
- A read-only table to hold the status of configured LDAP servers, indexed by server IP.
- apLDAPServerStatusEntry
- An entry designed to hold the status of a single LDAP server
- apLDAPConfigName
- The name of the ldap-config element that contains this LDAP server.
- apLDAPServerIpAddress
- The IP address of this LDAP server.
- apLDAPServerStatus
- The status of this LDAP server.
- apSysMgmtTrapTable
- A table to hold the traps reported by the Session Border Controller. Traps arranged into rows, indexed by system time, and trap table instance index. These are all read only.
- apSysMgmtTrapTableEntry
- A table entry designed to hold traps, on a Session Border Controller.
- apTrapTableSystemTime
- The system time of the session border controller.
- apTrapTableInstanceIndex
- The instance index of the trapID incremented with a resolution of a second.
- apTrapTableNumVariables
- The number of information encoded in the trap.
- apTrapTableSysUptime
- The snmp sysUptime when the trap was generated.
- apTrapTableTrapId
- The trapID associated with the fault condition.
- apSysMgmtTrapInformationTable
- A table to hold the trap information reported by the Session Border Controller. Information arranged into rows, indexed by system time, trap table instance index and trap information data index. These are all read only.
- apSysMgmtTrapInformationTableEntry
- A table entry designed to hold trap information, reported by a Session Border Controller.
- apTrapInformationTableDataIndex
- The index of the information encoded in the trap.
- apTrapInformationTableDataType
- snmp type enumerated encoded in the trap. snmpTypeInteger is the size of integer. snmpTypeObjectIpAddress is an octet string of length 4.
- apTrapInformationTableDataLength
- The octet length of the information encoded in the trap.
- apTrapInformationTableDataOctets
- The information represented in octets: snmpTypeInteger, snmpTypeObjectCounter32, snmpTypeObjectGauge, snmpTypeObjectOpaque and snmpTypeUnsignedInteger32 are 4 octets long. snmpTypeCounter64 is 8 octets long. snmpTypeObjectIpAddress, snmpTypeObjectNSAPAddr ...
- apSysMgmtTrapType
- The object ID of the item which value is exceeds its monitoring threshold
- apSysMgmtTrapValue
- The value of the object which causes the trap to occur.
- apSysMgmtSlotID
- The slot the trap occurs on.
- apSysMgmtSlotType
- The slot type the trap occurs on.
- apSysMgmtRedundancyState
- The new redundancy state for the generating entity.
- apSysMgmtSingleUnitRedundancyState
- The new redundancy state for the generating entity.
- apSysMgmtPowerLocation
- 0=left:power supply A, 1=right:power supply B.
- apSysMgmtPowerPresence
- 0=power supply down/not present, 1=power supply up/present.
- apSysMgmtTempValue
- the value is the temperature of the system in degrees celsius.
- apSysMgmtFanLocation
- 0=left fan unit, 1=middle fan unit, 2=right fan unit.
- apSysMgmtFanSpeed
- the value is the percentage of fan speed of given fan location.
- apSysMgmtTaskSuspend
- The text string of the critical task that has entered the suspended state. If the text of the message exceeds 255 bytes, the message will be truncated to 255 bytes.
- apSysMgmtRedRole
- 0=primary unit in a redundant pair, 1=secondary unit in a redundant pair.
- apSysMgmtRedTransState
- the state that the system, give by location, is transitioning too.
- apSysMgmtMediaPorts
- The value is the failure rate percentage at which the system cannot allocate media ports.
- apSysMgmtMediaBandwidth
- The value is the failure rate percentage at which the system cannot allocate media bandwidth.
- apSysMgmtGatewayUnreachable
- The value is the gateway that is or was unreachable from the system. The string will formated as such
: : where xx.xx.xx.xx is the IPv4 address, y is the slot and zz is the subport ID. If the text of the message exceeds 255 bytes, the m ... - apSysMgmtRadiusDown
- the value identifies if all the radius connections are down or if just some of the radius connects have become unreachable.
- apSysMgmtH323InitFail
- The text string is the H.323 stack-name that has failed to initilize. If the text of the message exceeds 255 bytes, the message will be truncated to 255 bytes.
- apSysMgmtCfgSaveFail
- The text string is the reason phrase why the save config has failed to execute properly on the system. If the text of the message exceeds 255 bytes, the message will be truncated to 255 bytes.
- apSysMgmtHardwareError
- The text string is the type of hardware error that has occurred. If the text of the message exceeds 255 bytes, the message will be truncated to 255 bytes.
- apSysMgmtSAHostname
- The hostname of the Session Agent that is changing status
- apSysMgmtSAIP
- The ip address of the Session Agent that is changing status
- apSysMgmtSAStatus
- The status that the Session Agent is changing into
- apSysMgmtSAStatusReason
- The reason for the status change of the Session Agent
- apSysMgmtAuthFailLevel
- The state a user was trying to switch to or from when failing to authenticate.
- apSysMgmtAuthFailProto
- The protocol a user was using when failing to authenticate
- apSysMgmtAuthFailOrigin
- The origin of a user who failed to authenticate. The string will formated as such
: where xx.xx.xx.xx is the IPv4 address, and yyyy is the port. - apSysMgmtSystemState
- The current value of the system-state
- apSysMgmtTaskDelete
- The text string of the task that has been deleted from the system. If the text of the message exceeds 255 bytes, the message will be truncated to 255 bytes.
- apSysMgmtAlgdCPULoad
- The value is the CPU utilization percentage of application tasks.
- apSysMgmtSipInterfaceRealmName
- The realm of the Sip Interface that is changing status
- apSysMgmtSipInterfaceIP
- The ip address of the Sip Interface that is changing status
- apSysMgmtSipInterfaceStatus
- The status that the Sip Interface is changing into
- apSysMgmtSipInterfaceStatusReason
- The reason for the status change of the Sip Interface
- apSysMgmtCollectPushServerUnreachable
- The value is the push server that is or was unreachable from the system collector.
- apSysMgmtNTPServer
- The value is the server that is or was unreachable from the NTP.
- apSysMgmtBorderGatewayId
- The identifier of a Border Gateway.
- apSysMgmtRFactor
- The R-factor value of the call that has exceeded a configured threshold.
- apSysMgmtCallId
- A call correlation identifier.
- apSysMgmtSurrogateRegHost
- The registrar host name for a surrogate registration
- apSysMgmtSurrogateRegAor
- The address of record used in a surrogate registration
- apSysMgmtRealmID
- The Realm ID.
- apSysMgmtCollectorPushNodeName
- The node name from which the collector file was transferred successfully.
- apSysMgmtCollectorPushUniqueFileName
- The unique collector fileID that was transferred successfully.
- apSysMgmtCollectorPushReceiverAddress
- The address of the push-receiver to where the collector file was transferred successfully.
- apSysMgmtRealmName
- The realm whose session constraint status is changing
- apSysMgmtRealmStatusReason
- The reason for the status change of the Realm Status
- apSysMgmtGatewaySynchronized
- The value is the default gateway that is synchronized in the ARP table of the system. The string will formated as such
where xx.xx.xx.xx is the IPv4 address. - apSysCallRecordingServerName
- Call Recording Server name
- apSysCallRecordingServerState
- The current state of the Call Recording Server
- apSysCDRPushReceiverAddressType
- The address type of the receiver.
- apSysCDRPushReceiverAddress
- The address of the push receiver.
- apSysCDRPushReceiverFailureReasonCode
- The reason code for the failure.
- apSysMgmtDOSIpAddress
- The blocked IP address.
- apSysMgmtDOSRealmID
- The blocked Realm ID.
- apSysMgmtDOSFromUri
- The FROM header of the message that caused the block (if available).
- apSysMgmtDOSInetAddressType
- The blocked IP address family.
- apSysMgmtDOSInetAddress
- The blocked IP address.
- apSysMgmtSipRejFromUriUser
- The user portion of the FROM URI of the rejected SIP request
- apSysMgmtSipRejToUriUser
- The user portion of the TO URI of the rejected SIP request
- apSysMgmtSipRejRequestUri
- The Request URI of the rejected SIP request
- apSysMgmtSipRejContactUri
- the contact uri of the rejected sip request
- apSysMgmtSipRejIpAddress
- The remote IP address of the rejected SIP request
- apSysMgmtSipRejMsgType
- The type of SIP Request.
- apSysMgmtSipRejMethod
- The method of the SIP rejection message.
- apSysMgmtSipRejReason
- The REASON string of the SIP rejection message.
- apSysMgmtGeneralGroup
- A collection of objects providing the system manager MIB capability.
- apSysMgmtCombinedGroup
- A collection of statistics for session H323 and SIP sessions.
- apSysMgmtSipGroup
- A collection of statistics for SIP sessions.
- apSysMgmtH323Group
- A collection of statistics for H323 sessions.
- apSysMgmtSigRealmGroup
- A collection of statistics for realms.
- apSysMgmtCtrlStatsGroup
- A collection of stats reflecting network management controls.
- apSysMgmtENUMServerStatusGroup
- Report the status of configured ENUM servers.
- apSysMgmtNSEPStatsGroup
- Objects to monitor NS/EP sessions.
- apSysMgmtExtSigRealmStatsGroup
- Objects added to the realm table for extended stat reporting.
- apSysMgmtLDAPServerStatusGroup
- Objects to monitor NS/EP sessions.
- apSysMgmtRegistrationGroup
- Objects to monitor registration.
- apSysMgmtRegCacheLimitGroup
- Objects for monitoring registration cache usage.
- apSysMgmtShortSessionGroup
- Objects to monitor short duration sessions.
- apSysMgmtTrapTableObjectGroup
- Attributes of the trap table in the Session Border Controller.
- apSysMgmtRealmStatsQoSGroup
- Objects to monitor QoS statistics for a realm.
- apSysMgmtApplicationCPUUsageGroup
- Objects to monitor application CPU usage.
You can start network devices monitoring using free 30-day trial version of IPHost Network Monitor right now.
Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access.
The IPHost's SNMP monitor can communicate and interact with any SNMP-enabled device.
