ASKEY-ADSL-MIB Download

adslAlarmConfProfileExt2Table

This table extends the adslLineAlarmConfProfileTable and provides threshold parameters for all the counters defined in this MIB module.

adslAlarmConfProfileExt2Entry

An entry extends the adslLineAlarmConfProfileTable defined in [RFC2662]. Each entry corresponds to an ADSL alarm profile.

adslAtucThreshold1DayEsL

The first time the value of the corresponding instance of adslAtucPerf1DayEsL reaches or exceeds this value within a given 1-day performance data collection period, an adslAtucEsLThreshTrap notification will be generated. The value '0' will disable the no ...

adslAtucThreshold1DaySesL

The first time the value of the corresponding instance of adslAtucPerf1DaySesL reaches or exceeds this value within a given 1-day performance data collection period, an adslAtucSesLThreshTrap notification will be generated. The value '0' will disable the ...

adslAtucThreshold1DayUasL

The first time the value of the corresponding instance of adslAtucPerf1DayUasL reaches or exceeds this value within a given 1-day performance data collection period, an adslAtucUasLThreshTrap notification will be generated. The value '0' will disable the ...

adslAturThreshold1DayEsL

The first time the value of the corresponding instance of adslAturPerf1DayEsL reaches or exceeds this value within a given 1-day performance data collection period, an adslAturEsLThreshTrap notification will be generated. The value '0' will disable the no ...

adslAturThreshold1DaySesL

The first time the value of the corresponding instance of adslAturPerf1DaySesL reaches or exceeds this value within a given 1-day performance data collection period, an adslAturSesLThreshTrap notification will be generated. The value '0' will disable the ...

adslAturThreshold1DayUasL

The first time the value of the corresponding instance of adslAturPerf1DayUasL reaches or exceeds this value within a given 1-day performance data collection period, an adslAturUasLThreshTrap notification will be generated. The value '0' will disable the ...

adslAtucBitAllocationTable

This table specify bit allocation table

adslAturBitAllocationTable

This table specify bit allocation table

adslAturBitAllocationEntry

An entry in the adslBitAllocationTable.

adslLoopDiagIfIndex

The ifIndex of the target interface to do loop diagnostic

adslLoopDiagProfileName

The profile used to do loop diagnostic

adslLoopDiagAction

Set to start to trigger ADSL2/ADSL2+ loop diagnostics. Once loop diagnostic is started, the status will reflect in adslLoopDiagCurrStatus. Set to cancel can allow user to cancel an ongoing loop diagnostics process. Reading this variable is meaningless, th ...

adslLoopDiagLastStatus

This variable indicats status of last loop diagnostic on this line.

adslLoopDiagFailReason

Fail reason if loop diagnostic is failed. no fail reason is reported (0) IfIndex is not invalid (1) used profile does not exist or is inactive (2) line card does not exist ( ...

adslLoopDiagResultAtucLoopAttenuation

Valid only while adslLoopDiagCurrStatus is success.

adslLoopDiagResultAtucSignalAttenuation

Valid only while adslLoopDiagCurrStatus is success.

adslLoopDiagResultAtucSnrMargin

Valid only while adslLoopDiagCurrStatus is success.

adslLoopDiagResultAtucTxPower

Valid only while adslLoopDiagCurrStatus is success.

adslLoopDiagResultAturAttainableRate

Valid only while adslLoopDiagCurrStatus is success.

adslLoopDiagResultAturLoopAttenuation

Valid only while adslLoopDiagCurrStatus is success.

adslLoopDiagResultAturSignalAttenuation

Valid only while adslLoopDiagCurrStatus is success.

adslLoopDiagResultAturSnrMargin

Valid only while adslLoopDiagCurrStatus is success.

adslLoopDiagResultAturTxPower

Valid only while adslLoopDiagCurrStatus is success.

adslLoopDiagResultDsHlogM

This object provides an array of downstream Hlog(f) m. The m of subcarrier(i) is 256*Octect(2i)+Octect(2i+1), i=0~511. To get real value of Hlog(f), it is caculated as (6-m(i)/10). A special value 1023 indicates that no measurement could be done for the s ...

adslLoopDiagResultUsHlogM

This object provides an array of upstream Hlog(f) m. The m of subcarrier(i) is 256*Octect(2i)+Octect(2i+1), i=0~63. To get real value of Hlog(f), it is caculated as (6-m(i)/10). A special value 1023 indicates that no measurement could be done for the subc ...

adslLoopDiagResultDsQuietLinePsdN

This object provides an array of downstream quiet line noise PSD n. The n of subcarrier(i) is Octect(i), i=0~511. To get real value of QLN(f), it is caculated as (-23-n(i)/2). A special value 255 indicates that no measurement could be done for the subcarr ...

adslLoopDiagResultUsQuietLinePsdN

This object provides an array of upstream quiet line noise PSD n. The n of subcarrier(i) is Octect(i), i=0~63. To get real value of QLN(f), it is caculated as (-23-n(i)/2). A special value 255 indicates that no measurement could be done for the subcarrier ...

adslLoopDiagResultDsSnrN

This table used for ADSL2/ADSL2+ downstream loop diagnostics SNR.

adslLoopDiagResultUsSnrN

This table used for ADSL2/ADSL2+ upstream loop diagnostics SNR. value of subcarrier(i) is Octect(i)

askeyADSLConfProfileExtTable

This parameter represents the maximum nominal transmit PSD in the downstream direction during initialization and showtime (in dBm/Hz). It ranges from -60 to -40 dBm/Hz, with 0.1 dB steps.

askeyADSLConfProfileExtEntry

AUGMENTS { adslLineConfProfileEntry } ::= { askeyADSLConfProfileExtTable 1 } AskeyADSLConfProfileExtEntry ::= SEQUENCE { adslAtucConfMaxNominalPSD INTEGER, adslAturConfMaxNominalPSD INTEGER, adslConfSRAModeEnabled ...

adslAturConfMaxNominalPSD

atu-r max nominal power spectrum desity

adslConfSRAModeEnabled

The seamless rate adaptive mode can force dynamic rate mode changing rate at runtime without retraining. This object is only applies to dynamic rate mode.

adslConfPwrMgtL2Mode

Line power management L2 mode.

adslConfPwrMgtL2MinRate

minimum rate and low-bound to data rate for power management L2 state.

adslConfPwrMgtL2MaxRate

maximum rate to data rate for power management L2 state.

adslConfPwrMgtLowerL2ContinuousTime

The continuous time of line rate lower than L2 low-bound. Line can start transferring into L2 after this time pass.

adslConfPwrMgtL0Time

The minimum time in L0 state before line starts to check L2 criteria.

adslConfPwrMgtL3Accepted

This object indicates whether the ADSL lines accept CPE power management L3 request. If it is, the ADSL lines applied this profile will accept request from CPE and transfer their power management state into L3 by the CPE request.

adslConfAtucMinINP

ATUC(i.e. downstream) minimum INP(Impulse Noise Protect) capability. The object value indicates the multiple of INP symbol. For example, 'time-4' means four times.

adslConfAturMinINP

ATUR(i.e. upstream) minimum INP(Impulse Noise Protect) capability. The object value indicates the multiple of INP symbol. For example, 'time-4' means four times.

askeyAdslAtucPerfExtTable

This table extends the adslAtucPerfDataTable to provide received and transmitted user cell counters, code violation and fail initialization counts.

askeyAdslAtucPerfExtEntry

An entry extends the adslAtucPerfDataEntry defined in [RFC2662]. Each entry corresponds to an ADSL interface.

aAdslAtucPerfCurr15MinReceivedCells

Count of all user cells received on this interface within the current 15 minute interval.

aAdslAtucPerfCurr15MinTransmittedCells

Count of all user cells transmitted on this interface within the current 15 minute interval.

aAdslAtucPerfCurr15MinCodeViolation

Count of code violations on this interface within the current 15 minute interval.

aAdslAtucPerfCurr15MinFailInits

Count of failed initializations on this interface within the current 15 minute interval.

aAdslAtucPerfCurr1DayReceivedCells

Count of all user cells received on this interface during the current day as measured by adslAtucPerfCurr1DayTimeElapsed.

aAdslAtucPerfCurr1DayTransmittedCells

Count of all user cells transmitted on this interface during the current day as measured by adslAtucPerfCurr1DayTimeElapsed.

aAdslAtucPerfCurr1DayCodeViolation

Count of code violations on this interface during the current day.

aAdslAtucPerfCurr1DayFailInits

Count of full initializations on this interface during the current day.

aAdslAtucPerfPrev1DayReceivedCells

Count of all user cells received on this interface within the most recent previous 1-day period.

aAdslAtucPerfPrev1DayTransmittedCells

Count of all user cells transmitted on this interface within the most recent previous 1-day period.

aAdslAtucPerfPerf1DayCodeViolation

Count of code violations on this interface within the most recent previous 1-day period.

aAdslAtucPerfPerf1DayFailInits

Count of full initializations on this interface within the most recent previous 1-day period.

askeyAdslAturPerfExtTable

This table extends the adslAturPerfDataTable to provide more performance information.

askeyAdslAturPerfExtEntry

An entry extends the adslAturPerfDataEntry defined in [RFC2662]. Each entry corresponds to an ADSL interface.

aAdslAturPerfCurr15MinCodeViolation

Count of code violations on this interface within the current 15 minute interval.

aAdslAturPerfCurr1DayCodeViolation

Count of code violations on this interface within the current 1 day interval.

aAdslAturPerfPerf1DayCodeViolation

Count of code violations on this interface within the most recent previous 1-day period.

askeyAdslAtucIntervalExtTable

This table extends the adslAtucIntervalTable to provide more performance informations

askeyAdslAtucIntervalExtEntry

An entry extends the adslAtucIntervalEntry defined in [RFC2662].

aAdslAtucIntervalReceivedCells

Count of all user cells received on this interface during this interval.

aAdslAtucIntervalTransmittedCells

Count of all user cells transmitted on this interface during this interval.

aAdslAtucIntervalCodeViolation

Count of code violations on this interface during this interval.

aAdslAtucIntervalFailInits

Count of full initializations on this interface during this interval.

askeyAdslAturIntervalExtTable

This table extends the adslAturIntervalTable to provide more perfomance information.

askeyAdslAturIntervalExtEntry

An entry extends the adslAturIntervalEntry defined in [RFC2662].

aAdslAturIntervalCodeViolation

Count of code violations on this interface during this interval.

adslPortMonitorIfIndex

The ifIndex of target adsl port to do port monitor.

adslPortMonitorAction

Set to start to port monitor. Once loop diagnostic is started, the status will reflect in adslPortMonitorCurrStatus. Set to cancel can allow user to cancel an ongoing loop diagnostics process. Reading this variable is meaningless, the result will always b ...

adslPortMonitorLastStatus

This variable indicats status of last time port monitor is performed. If adslPortMonitorIfIndex is changed, this value wil reset to noStatus.

adslPortMonitorFailReason

The fail reason of last time port monitor is failed.

adslPortMonitorResultDsHlogM

This object provides an array of downstream Hlog(f) m. The m of subcarrier(i) is 256*Octect(2i)+Octect(2i+1), i=0~511. To get real value of Hlog(f), it is caculated as (6-m(i)/10). A special value 1023 indicates that no measurement could be done for the s ...

adslPortMonitorResultUsHlogM

This object provides an array of upstream Hlog(f) m. The m of subcarrier(i) is 256*Octect(2i)+Octect(2i+1), i=0~63. To get real value of Hlog(f), it is caculated as (6-m(i)/10). A special value 1023 indicates that no measurement could be done for the subc ...

adslPortMonitorResultDsQuietLinePsdN

This object provides an array of downstream quiet line noise PSD n. The n of subcarrier(i) is Octect(i), i=0~511. To get real value of QLN(f), it is caculated as (-23-n(i)/2). A special value 255 indicates that no measurement could be done for the subcarr ...

adslPortMonitorResultUsQuietLinePsdN

This object provides an array of upstream quiet line noise PSD n. The n of subcarrier(i) is Octect(i), i=0~63. To get real value of QLN(f), it is caculated as (-23-n(i)/2). A special value 255 indicates that no measurement could be done for the subcarrier ...

adslSingleEndLoopTestIfIndex

The ifIndex of target adsl port to do SELT.

adslSingleEndLoopTestAction

Set to start to SELT. Once loop diagnostic is started, the status will reflect in adslPortMonitorCurrStatus. Reading this variable is meaningless, the result will always be 0.

adslSingleEndLoopTestLastStatus

This variable indicats status of last time SELT is performed. If adslSingleEndLoopTestIfIndex is changed, this value wil reset to noStatus.

adslSingleEndLoopTestFailReason

Fail reason if single end loop test is failed. no fail reason is reported (0) IfIndex is not invalid (1) line card does not exist (3) HWAPI return error ...

adslSingleEndLoopTestResultLoopLength

This object provides line length.

askeyADSLLineStatusExtTable

This table is a adslLineTable extended table for line status.

askeyADSLLineStatusExtEntry

The entry into extended ADSL line status table.

askeyADSLLineStandard

Current ADSL line standard.

askeyADSLLinePwrMgtMode

Current power management mode.

askeyADSLLinePwrMgtState

Current power management state.

askeyADSLLinePwrMgtTransManual

Try to transit immediately into power management L0, L2, or L3 by manual.

askeyADSLLineAtucCurrINP

This line ATU-C(down stream) current INP(Impulse Noise Protected) value. This value is 0.01 symbol times.

askeyADSLLineAturCurrINP

This line ATU-R(up stream) current INP(Impulse Noise Protected) value. This value is 0.01 symbol times.

--askeyCPEWirelessControl

-- "Enable or disable wireless control. A table indicates remote CPE wireless objects for each line.

askeyCPEWirelessEntry

Remote CPE wireless objects.

askeyCPEWirelessAdminState

Remote CPE wireless administrative state.

askeyCPEWirelessOperState

Remote CPE wireless operational state.

askeyADSLCardFilterTable

This table is a ADSL card(slot) filter status.

askeyADSLCardFilterEntry

The entry indicates ADSL card filter status table.

dsBroadcastFilterVLANID

The object indicates the VLAN ID configuration for down stream broadcast filters on the specifed ADSL card.