BFD-STD-MIB

BFD-STD-MIB Download

MIBs list

Bidirectional Forwarding Management Information Base.

With the IPHost SNMP tool, you can monitor any SNMP objects of the BFD-STD-MIB .

OID list for BFD-STD-MIB

bfdAdminStatus
The global administrative status of BFD in this router. The value 'enabled' denotes that the BFD Process is active on at least one interface; 'disabled' disables it on all interfaces.
bfdVersionNumber
The current version number of the BFD protocol.
bfdSessTable
The BFD Session Table describes the BFD sessions.
bfdSessEntry
The BFD Session Entry describes BFD session.
bfdSessIndex
This object contains an index used to represent a unique BFD session on this device.
bfdSessApplicationId
This object contains an index used to indicate a local application which owns or maintains this BFD session. For instance, the MPLS VPN process may maintain a subset of the total number of BFD sessions. This application ID provides a convenient way to se ...
bfdSessDiscriminator
This object specifies the local discriminator for this BFD session, used to uniquely identify it.
bfdSessRemoteDiscr
This object specifies the session discriminator chosen by the remote system for this BFD session.
bfdSessUdpPort
The UDP Port for BFD. The default value is the well-known value for this port.
bfdSessState
The perceived state of the BFD session.
bfdSessRemoteHeardFlag
This object specifies status of BFD packet reception from the remote system. Specifically, it is set to true(1) if the local system is actively receiving BFD packets from the remote system, and is set to false(0) if the local system has not received BFD p ...
bfdSessDiag
A diagnostic code specifying the local system's reason for the last transition of the session from up(1) to some other state.
bfdSessOperMode
This object specifies current operating mode that BFD session is operating in. A value of AsyncModeWEchoFun(1) ... A value of AsynchModeWOEchoFun(2) ... A value of DemandModeWEchoFunction(3) ... A value of DemandModeWOEchoFunction(4) ... ::= { bfdSessEntr ...
bfdSessEchoFuncModeDesiredFlag
This object indicates that the local system's desire to use Echo mode. Specifically, it is set to true(1) if the local system wishes to use Echo mode or false(0) if not
bfdSessControlPlanIndepFlag
This object indicates that the local system's ability to continue to function through a disruption of the control plane. Specifically, it is set to true(1) if the local system BFD implementation is independent of the control plane. Otherwise, the value is ...
bfdSessAddrType
This object specifies IP address of the interface associated with this BFD session. Only values unknown(0), ipv4(1) or ipv6(2) have to be supported. A value of unknown(0) is allowed only when the outgoing interface is of type point-to-point, or when the B ...
bfdSessDesiredMinTxInterval
This object specifies the minimum interval, in microseconds, that the local system would like to use when transmitting BFD Control packets.
bfdSessDesiredMinRxInterval
This object specifies the minimum interval, in microseconds, between received BFD Control packets the local system is capable of supporting.
bfdSessDesiredMinEchoRxInterval
This object specifies the minimum interval, in microseconds, between received BFD Echo packets that this system is capable of supporting.
bfdSessDetectMult
This object specifies the Detect time multiplier.
bfdSessStorType
This variable indicates the storage type for this object. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.
bfdSessRowStatus
This variable is used to create, modify, and/or delete a row in this table. When a row in this table has a row in the active(1) state, no objects in this row can be modified except the bfdSessRowStatus and bfdSessStorageType.
bfdSessAuthPresFlag
This object indicates that the local system's desire to use Authentication. Specifically, it is set to true(1) if the local system wishes the session to be authenticated or false(0) if not
bfdSessAuthenticationType
The Authentication Type used for this BFD session. This field is valid only when the Authentication Present bit is set
bfdSessPerfTable
This table specifies BFD Session performance counters.
bfdSessPerfEntry
An entry in this table is created by a BFD-enabled node for every BFD Session. bfdCounterDiscontinuityTime is used to indicate potential discontinuity for all counter objects in this table.
bfdSessPerfPktIn
The total number of BFD messages received for this BFD session.
bfdSessPerfPktOut
The total number of BFD messages sent for this BFD session.
bfdSessUpTime
The value of sysUpTime on the most recent occasion at which the session came up. If no such up event exists this object contains a zero value.
bfdSessPerfLastSessDownTime
The value of sysUpTime on the most recent occasion at which the last time communication was lost with the neighbor. If no such down event exist this object contains a zero value.
bfdSessPerfLastCommLostDiag
The BFD diag code for the last time communication was lost with the neighbor. If no such down event exists this object contains a zero value.
bfdSessPerfSessUpCount
The number of times this session has gone into the Up state since the router last rebooted.
bfdSessPerfDiscTime
The value of sysUpTime on the most recent occasion at which any one or more of the session counters suffered a discontinuity. The relevant counters are the specific instances associated with this BFD session of any Counter32 object contained in the BfdSes ...
bfdSessPerfPktInHC
This value represents the total number of BFD messages received for this BFD session. It MUST be equal to the least significant 32 bits of bfdSessPerfPktIn if bfdSessPerfPktInHC is supported according to the rules spelled out in RFC2863.
bfdSessPerfPktOutHC
This value represents the total number of total number of BFD messages transmitted for this BFD session. It MUST be equal to the least significant 32 bits of bfdSessPerfPktIn if bfdSessPerfPktOutHC is supported according to the rules spelled out in RFC286 ...
bfdSessMapTable
The BFD Session Mapping Table maps the complex indexing of the BFD sessions to the flat BFDIndex used in the BfdSessionTable. Implementors need to be aware that if the value of the bfdSessAddr (an OID) has more that 111 sub-identifiers, then OIDs of colum ...
bfdSessMapEntry
The BFD Session Entry describes BFD session that is mapped to this index. Implementors need to be aware that if the value of the mplsInSegmentMapLabelPtrIndex (an OID) has more that 111 sub-identifiers, then OIDs of column instances in this table will hav ...
bfdSessMapBfdIndex
This object specifies the BfdIndex referred to by the indexes of this row. In essence, a mapping is provided between these indexes and the BfdSessTable.
bfdSessNotificationsEnable
If this object is set to true(1), then it enables the emission of bfdSessUp and bfdSessDown notifications; otherwise these notifications are not emitted.
bfdSessionGroup
Collection of objects needed for BFD sessions.
bfdSessionPerfGroup
Collection of objects needed to monitor the performance of BFD sessions.
bfdSessionPerfHCGroup
Collection of objects needed to monitor the performance of BFD sessions for which the values of bfdSessPerfPktIn, bfdSessPerfPktOut wrap around too quickly.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now. Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access. The IPHost's SNMP monitor can communicate and interact with any SNMP-enabled device.

MIBs list