CALISTA-DPA-MIB

CALISTA-DPA-MIB Download

MIBs list

This MIB is for management of Cisco DPA voicemail gateway devices. These allow interfacing of Octel voicemail systems with Cisco CallManager.

IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for CALISTA-DPA-MIB

serialNumber
Unique value assigned to each DPA device.
imageVersion
The version of the main image code that the DPA is currently running.
loaderVersion
The version of the boot loader code that the DPA is currently running.
integrationMode
The integration mode in which the DPA is currently operating: unconfigured the factory setting; the DPA requires configuring before it can be connected to an Octel voicemail system. simple the DPA is connected to only an Octel voicemail system a ...
pbxType
The PBX type that the DPA is currently emulating in order to communicate with the Octel voicemail system. This also determines the protocol used on the digital telephony links to the PBX, if in hybrid mode.
receivedCalls
The number of IP telephony calls made to this DPA. This includes all calls, regardless of whether the Octel answered. This could happen, for instance, if the original caller hangs up before the Octel accepts the call.
outgoingCallsMade
The number of calls originated by the Octel which go through the DPA. These include networking calls (communication between peer Octel systems), pager and mobile notifications and fax calls.
mwiCommandsReceived
The number of commands to set or clear a Message Waiting Indicator received by this DPA from the Octel voicemail system. These commands are relayed to the Cisco CallManager via the virtual port, and, if the DPA is operating in hybrid mode, the attached PB ...
pbxQueuedMWICommands
The number of commands to set or clear a Message Waiting Indicator which are queued within the DPA, waiting to be sent to the PBX. These commands will be issued to the PBX when the appropriate port becomes available. If the DPA is not operating in hybrid ...
pbxCompletedMWICommands
The number of commands to set or clear a Message Waiting Indicator which have been successfully sent to the PBX. If the DPA is not operating in hybrid mode, this value will always be zero.
pbxMWIErrors
The number of commands to set or clear a Message Waiting Indicator that the DPA was unable to send successfully to the PBX. Such commands will have been discarded, and the cause written to the DPA's error log. If the DPA is not operating in hybrid mode, t ...
callManagerQueuedMWICommands
The number of commands to set or clear a Message Waiting Indicator which are queued within the DPA, waiting to be sent to Cisco CallManager.
callManagerCompletedMWICommands
The number of commands to set or clear a Message Waiting Indicator which have been successfully sent to Cisco CallManager.
callManagerMWIErrors
The number of commands to set or clear a Message Waiting Indicator that the DPA was unable to send successfully to Cisco CallManager. Such commands will have been discarded, and the cause written to the DPA's error log.
portTable
A list of the available ports on the DPA, with current state information for each.
portEntry
An entry containing all relevant information for a DPA port.
portIndex
A unique value for each port. Its value ranges from 1 to the total number of ports.
portType
How this port is currently being used: notInUse not currently in use (may become active later) octel connected to an Octel voicemail system pbx connected to a digital PBX virtual not a physical port; connected only to Cisco CallManage ...
portTelephonyLinkState
The state of the digital telephony link. This field only has meaning for physical ports connected to Octel voicemail systems or digital PBX systems. For virtual ports or those currently not in use, the state will be returned as notApplicable.
portCallManagerLinkState
The state of this port's connection to a Cisco CallManager, if such a connection exists. For ports connected to digital PBX systems (see the portType entry) this will be returned as notApplicable.
portCallState
Once a port's required link(s) to an Octel / PBX and CallManager have become active, it then becomes available for use placing calls between the two realms. This entry shows the current state of any active call for a port, as described in the DPA Administ ...
portDeviceName
The device name under which this port is registered with Cisco CallManager.
portCodecInUse
If there is a call in progress on this port, this entry gives the codec in use, otherwise it will return none.
portErrors
The number of centiseconds during which PBX protocol errors were detected for this port. It is normal for there to be some errors, especially during port initialization, but very large values should only be seen on disconnected ports.
portDacLevel
The DAC level for the port; this is related to the voltage level on the digital telephony port, and is only used in diagnosis of internal hardware faults.
callManagerConnectionTable
A list of all of the Cisco CallManager connections that the DPA is currently maintaining.
callManagerConnectionEntry
An entry containing all relevant information for a connection to a Cisco CallManager device.
cmConnectionPortIndex
Corresponds to portIndex in PortEntry.
cmConnectionIndex
The index of this connection; each port can have connections to several Cisco CallManagers, with one active connection and the rest operating in standby mode.
cmConnectionCallManagerName
The host name, if known, of the CallManager to which this connection refers.
cmConnectionIpAddress
The IP address of the CallManager to which this connection refers.
cmConnectionIpPort
The TCP port number on the CallManager to which this connection has been made.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list