CISCO-5800-HEALTH-MON-MIB Download

ciscoHealthMonNumShelves

The total number of shelves monitored by the health monitor.

ciscoHealthMonNumT1E1LinesUp

This is the total number of active T1/E1 lines across all the monitored shelves.

ciscoHealthMonNumT1E1LinesDown

This is the total number of inactive T1/E1 lines across all the monitored shelves.

ciscoHealthMonNumActiveDS0

The total number of DS0's in use across all the monitored shelves.

ciscoHealthMonNumTotalDS0

The total number of DS0's from all the monitored shelves.

ciscoHealthMonNumTotalModems

This is the total number of ciscoHealthMonTotalModems from all the monitored shelves.

ciscoHealthMonNumModemsInUse

This is the total number of ciscoHealthMonModemsInUse from all the monitored shelves .

ciscoHealthMonNumUnavailableModems

This is the total number of ciscoHealthMonUnavailableModems from all the monitored shelves.

ciscoHealthMonStatusTable

The table of status maintained by the health monitor.

ciscoHealthMonStatusEntry

An entry in the status table, containing the information about the status of the health monitoring setup commands. Depending on the configured monitoring type these commands are setup on the shelf or on the system controller. Monitoring iomem is done on t ...

ciscoHealthMonStatusIndex

Unique index for indexing the ciscoHealthMonStatusTable. This index is for SNMP purposes only, and has no intrinsic meaning.

ciscoHealthMonStatusType

Monitoring type modemUtil(1), trunkUtil(2), iomemUtil(3)

ciscoHealthMonShelfId

This is the shelf-id of the monitored shelf.

ciscoHealthMonAddress

This is the IP address of the monitored shelf.

ciscoHealthMonDescr

Textual description of the utilization type being monitored on a shelf. This description is a short textual label, suitable as a human-sensible identification for the rest of the information in the entry.

ciscoHealthMonValue

The current value for the monitoring type on a monitored shelf.

ciscoHealthMonThreshold

This is the monitoring threshold value configured through the command line. If the configured monitoring type is io-mem, rmon alarm on the shelf will use this value as the threshold for generating the event. Shelf will be asked to send this generated even ...

ciscoHealthMonThresholdExceedCount

Number of times monitoring value exceeded the configured threshold value.

ciscoHealthMonCountTable

The table of mib entries maintained by the health monitor.

ciscoHealthMonCountEntry

An entry in the count table represents the polled data of ceratin mib variables for a router shelf. System controller will do the polling of the mib variables only if system controller can talk to that particular router shelf.

ciscoHealthMonCountIndex

Unique index for indexing the ciscoHealthMonCountTable. This unique index represents the shelf-id of the monitored shelf.

ciscoHealthMonT1E1LinesUp

The number of active T1 and E1 lines on a shelf. A line is considered as an active line if it is operationally up.

ciscoHealthMonT1E1LinesDown

The number of inactive T1 and E1 lines on a shelf. This is the special case where a line is counted as down if it is operationally down and administratively up.

ciscoHealthMonActiveDS0

The number of DS0's that are currently in use.

ciscoHealthMonTotalDS0

The total number of DS0's on a shelf. This is based on the number of T1 and E1 lines present on the router shelf. Total DS0 = (# of T1 lines - 1 * 24) + 23 + (# of E1 lines*30).

ciscoHealthMonTotalModems

The total number of modems installed on a shelf. This is the polled value for cmSystemInstalledModem from the router shelf.

ciscoHealthMonModemsInUse

The number of modems on a shelf that are in the following states: connected, offHook, loopback, or downloadFirmware. This the polled value for cmSystemModemsInUse from the router shelf.

ciscoHealthMonUnavailableModems

The number of modems on a shelf that cannot accept the calls. They are in the following states: unknown, onHook, busiedOut, disabled, bad, or downloadFirmwareFailed. This is the polled value for cmSystemModemsUnavailable from the router shelf.

ciscoHealthMonIOMemUsed

The number of bytes of IO memory that are currently in use by the applications on the shelf. This is the polled value for ciscoMemoryPoolUsed of io-mem type on the router shelf.

ciscoHealthMonIOMemFree

The number of bytes of IO memory that are currently available to use on the shelf.This is the polled value for ciscoMemoryPoolFree of io-mem type on the router shelf.

ciscoHealthMonCPUavgBusy5

5 minute exponentially-decayed moving average of the CPU busy percentage. This is the polled value for avgBusy5 from the router shelf.

ciscoHealthMonUtilEgressInOctet

This is the percentage utilization of total number of octets received on all the active egress interface, including framing characters. A port is considered as an egress port if it's ifSpeed > 1544000 % Utilization of ifInOctets = (diff_total_ifInoctets*1 ...

ciscoHealthMonUtilEgressOutOctet

This is the percentage utilization of the total number of octets transmitted out on all the active egress interface, including framing characters. A port is considered as an egress port if it's ifSpeed > 1544000 % Utilization of ifOutOctets = (diff_total_ ...

ciscoHealthMonShelfLastUpdate

This is the last time at which the system-controller has polled the mib entries from a shelf. However, if system-controller can not talk to that shelf, this entry will have the same time as the last update and a string Lost Contact. All the mib entries co ...

ciscoHealthMonEnableNotification

This variable indicates whether the system produces the ciscoHealthNotification. A false value will prevent notifications from being generated by this system.

cisco5800HealthMonMIBGroup

A collection of objects providing health monitoring capability to a cisco chassis.