CISCO-ATM-IF-PHYS-MIB

CISCO-ATM-IF-PHYS-MIB Download

MIBs list

Subset of SONET and DS3 MIB for LS1010.

IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for CISCO-ATM-IF-PHYS-MIB

ciscoAtmIfPhysTable
A table containing basic status and statistics for the physical layer of ATM interfaces.
ciscoAtmIfPhysEntry
Basic status and statistics for the physical layer of an ATM interface.
ciscoAtmIfPhysStatus
The status of the physical interface. The value of this object is only valid when the interface's ifAdminStatus has the value 'up'. Note that some of the enumerated values are specific to a particular physical layer.
ciscoAtmIfPhysSectionParityErrors
The number of B1 (BIP) errors on the physical interface. This object is only present for SONET interfaces.
ciscoAtmIfPhysLineParityErrors
The number of B2 (BIP) errors on the physical interface. This object is only present for SONET interfaces.
ciscoAtmIfPhysPathParityErrors
The number of B3 (BIP) errors on the physical interface. This object is only present for SONET interfaces.
ciscoAtmIfPhysLcvErrors
The number of Line Code Violation errors on the physical interface. This object is only present for DS3/E3/DS1/E1 interfaces.
ciscoAtmIfPhysCBitParityErrors
The number of C-bit parity violations on the physical interface. This object is only present for DS3 interfaces.
ciscoAtmIfPhysPBitParityErrors
The number of P-bit parity violations or E3 G.832 BIP-8 errors on the physical interface. This object is present only for DS3/E3 interfaces.
ciscoAtmIfPhysPlcpBipViolations
The number of PLCP BIP violations on the physical interface. This object is only present for DS3/E3/DS1/E1 interfaces.
ciscoAtmIfPhysLineFebeErrors
The number of Z2 (Line FEBE) errors on the physical interface. This object is only present for SONET interfaces.
ciscoAtmIfPhysPathFebeErrors
The number of G1 (Path FEBE) errors on the physical interface. This object is only present for SONET interfaces.
ciscoAtmIfPhysCellPayloadScrambling
The status of whether cell payload scrambling is enabled or disabled on the physical interface.
ciscoAtmIfPhysStsStreamScrambling
The status of whether STS-stream scrambling is enabled or disabled on the physical interface.
ciscoAtmIfPhysFramingMode
The framing format present on the physical interface. 'sonet' indicates sts-3c or sts-12c format and applies only to OC-3 and OC-12 type interfaces, respectively. 'sdh' indicates stm1 or stm4 format and applies only to OC-3 and OC-12 type interfaces, resp ...
ciscoAtmIfPhysLoopbackConfig
The loopback configured on the physical interface: 'noLoop' indicates no loopback is present. 'diagnosticLoop' indicates transmit data stream is looped to the receive direction. 'lineLoop' indicates receive data stream is looped to the transmit direction. ...
ciscoAtmIfPhysLineBuildOut
The line buildout configured on the transmit signal: 'e3AllCables' applies to all cables of E3 physical interfaces. 'ds3CablesUnder225' applies to cables under 225 feet of DS3 physical interfaces. 'ds3CablesOver225' applies to cables over 225 feet of DS3 ...
ciscoAtmIfPhysTransmitClockSource
The source of the tranmit clock: 'loopTiming' indicates that the recovered receive clock is used as the transmit clock. 'freeRunning' indicates that a local clock source is used. 'networkDerived' indicates that recovered receive clock from another interfa ...
ciscoAtmIfPhysClockSourcePriority
The priority of this interface if configured as a network clock source. 'notConfigured' indicates this is not configured as a network clock source.
ciscoAtmIfPhysClockSourceStatus
The network clock source status of this interface: 'notSelected' indicates this is not selected as the network clock source. 'selected' indicates this is selected as the network clock source.
ciscoAtmIfPhysDS1BitErrors
The number of bit errors (CRC-6 error in ESF mode and framing bit error in SF mode) on the physical interface. This object is only present for DS1 interfaces.
ciscoAtmIfPhysE1CrcErrors
The number of CRC errors (in CRC-4 mode) on the physical interface. This object is only present for E1 interfaces.
ciscoAtmIfPhysLineCode
The line coding present on the physical interface This object is only present for DS1/E1 interfaces. 'ami' indicates alternate mark inversion (AMI) line code on the DS1/E1 interface. 'b8zs' indicates B8ZS line code on the physical interface and applies o ...
ciscoAtmIfPhysMIBCommonGroup
A collection of objects common to all ATM physical layer interfaces.
ciscoAtmIfPhysMIBSonetGroup
A collection of objects for ATM SONET interfaces.
ciscoAtmIfPhysMIBDs3E3Group
A collection of objects for ATM DS3/E3 interfaces.
ciscoAtmIfPhysMIBCommonGroup2
Additional collection of objects common to all ATM physical layer interfaces.
ciscoAtmIfPhysMIBSonetGroup2
Additional collection of objects for ATM SONET interfaces.
ciscoAtmIfPhysMIBDs3Group
Collection of objects for ATM DS3 interfaces.
ciscoAtmIfPhysMIBDs1E1Group
A collection of objects for ATM DS1/E1 interfaces.
ciscoAtmIfPhysMIBDs1Group
A collection of objects for ATM DS1 interfaces.
ciscoAtmIfPhysMIBE1Group
A collection of objects for ATM E1 interfaces.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list