CISCO-ATM-QOS-MIB

CISCO-ATM-QOS-MIB Download

MIBs list

CISCO-ATM-QOS-MIB is created to provide ATM QoS information in these areas:1. Traffic shaping on a per-VC basis2. Traffic shaping on a per-VP basis3. Per-VC queuing/buffering

IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for CISCO-ATM-QOS-MIB

caqVccParamsTable
This table is defined to provide QoS information for each active ATM VC existing on the interface.
caqVccParamsEntry
This list contains the ATM QoS parameters provided by ciscoAtmQosVccEntry.
caqVccParamsType
The service category of this virtual circuit connection.
caqVccParamsPcrIn0
Input Peak Cell Rate (PCR) in kbps with Cell Loss Priority bit set to 0 (clp0).
caqVccParamsPcrIn01
Number of OAM F5 end to end loopback cells sent through the VCC.
caqVccParamsPcrOut0
Output Peak Cell Rate (PCR) in kbps with Cell Loss Priority bit set to 0 (clp0).
caqVccParamsPcrOut01
Output Peak Cell Rate (PCR) in kbps with Cell Loss Priority bit set to 1 (clp01).
caqVccParamsScrIn0
Input Sustained Cell Rate (SCR) in kbps for connection with VBR type of QoS and Cell Loss Priority bit set to 0 (clp0).
caqVccParamsScrIn01
Input Sustained Cell Rate (SCR) in kbps for connection with VBR type of QoS and Cell Loss Priority bit set to 1 (clp01).
caqVccParamsScrOut0
Output Sustained Cell Rate (SCR) in kbps for connection with VBR type of QoS and Cell Loss Priority bit set to 0 (clp0).
caqVccParamsScrOut01
Output Sustained Cell Rate (SCR) in kbps for connection with VBR type of QoS and Cell Loss Priority bit set to 1 (clp01).
caqVccParamsBcsIn0
Input Burst Cell Size (BCS) for connection with VBR type of QoS and Cell Loss Priority bit set to 0 (clp0).
caqVccParamsBcsIn01
Input Burst Cell Size (BCS) for connection with VBR type of QoS and Cell Loss Priority bit set to 1 (clp01).
caqVccParamsBcsOut0
Output Burst Cell Size (BCS) for connection with VBR type of QoS and Cell Loss Priority bit set to 0 (clp0).
caqVccParamsBcsOut01
Output Burst Cell Size (BCS) for connection with VBR type of QoS and Cell Loss Priority bit set to 1 (clp01).
caqVccParamsInheritLevel
The source of configuration for peak cell rate.
caqVccParamsMcrIn
Input Minimum Cell Rate (MCR) in kbps for connection with VBR-nrt or ABR type of QoS.
caqVccParamsMcrOut
Output Minimum Cell Rate (MCR) in kbps for connection with VBR-nrt or ABR type of QoS.
caqVccParamsInvRdf
Inverse of rate decrease factor.
caqVccParamsInvRif
Inverse of rate increase factor.
caqVccParamsRfl
The source of configuration for rate factor.
caqVccParamsCdv
Cell delay variation.
caqVccParamsCdvt
Cell delay variation tolerance.
caqVccParamsIcr
Initial cell rate.
caqVccParamsTbe
Transient buffer exposure.
caqVccParamsFrtt
Fixed round-trip time.
caqVccParamsNrm
Maximum number of tx cells for each forward rm cell.
caqVccParamsInvTrm
Maximum time between forward rm cells.
caqVccParamsInvCdf
Inverse of cutoff decrease factor.
caqVccParamsAdtf
Allowed cell rate decrease time factor.
caqVpcParamsTable
This table is defined to provide QoS information for each active ATM VP existing on the interface.
caqVpcParamsEntry
This list contains the ATM QoS parameters provided by ciscoAtmQosVpcEntry.
caqVpcParamsVpState
VP state of the current permanent virtual path.
caqVpcParamsPeakRate
Maximum rate in kbps at which the associated permanent virtual path can transmit data.
caqVpcParamsCesRate
Maximum rate in kbps at which CES VCs can transmit data with the associated permanent virtual path.
caqVpcParamsDataVcCount
Number of data VCs currently associated with the permanent virtual path.
caqVpcParamsCesVcCount
Number of CES VCs currently associated with the permanent virtual path.
caqVpcParamsVcdF4Seg
Vcd for F4 OAM segment processing.
caqVpcParamsVcdF4Ete
Vcd for F4 OAM end to end processing.
caqVpcParamsScr
Sustained cell rate associated with the PVP.
caqVpcParamsMbs
Maximum burst size associated with the PVP.
caqVpcParamsAvailBw
Bandwidth in Kbps currently currently available on this PVP.
caqQueuingParamsTable
This table provides queuing related information for a VC existing on an ATM interface.
caqQueuingParamsEntry
This is defined as an entry in caqQueuingParamsTable.
caqQueuingParamsMeanQDepth
Mean Queue Depth associated with the vc. This value is calculated based on the actual queue depth on the interface and the exponential weighting constant.
caqQueuingParamsClassTable
This table provides queuing information for all queuing classes associating with a VC.
caqQueuingParamsClassEntry
This is defined as an entry in ciscoAtmQosVcQueuingClassTable to provide queuing information of a specific class.
caqQueuingParamsClassIndex
A class index, which associates with an IP precedence (0 to 8), is defined to reference individual caqQueuingParamsClassEntry.
caqQueuingParamsClassRandDrp
Number of packets dropped when Mean Queue Length is between Minimum Threshold and Maximum Threshold range.
caqQueuingParamsClassTailDrp
Number of packets dropped because the Mean Queue Depth exceeds the Maximum Threshold value.
caqQueuingParamsClassMinThre
Minimum Threshold value in kbps.
caqQueuingParamsClassMaxThre
Maximum Threshold value in kbps.
caqQueuingParamsClassMrkProb
Mark probability denominator. This is the value used in the calculation of a packet being dropped when the average queue size is between the minimum threshold and the maximum threshold.
ciscoAtmQosVccGroup
A collection of objects providing per-VC ATM QoS related info.
ciscoAtmQosVccAddon1Group
Add-on objects providing per-VC ATM QoS related info.
ciscoAtmQosVpcGroup
A collection of objects providing per-VP ATM QoS related info.
ciscoAtmQosVpcAddon1Group
Add-on objects providing per-VP ATM QoS related info.
ciscoAtmQosVcQueuingGroup
A collection of objects providing per-VC queuing/buffering related info.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list