CISCO-CHANNEL-MIB Download
The Cisco Channel Interface Processor MIB, which allows management
of the Channel Interface Processor or CIP.
IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for CISCO-CHANNEL-MIB
- cipCardTable
- This table contains a list of values for the CMCC card which can be accessed to determine the general state of the CMCC. This table extends CardTable in the cisco.mib
- cipCardEntry
- A list of values for a CMCC Card. This extends cardTableEntry in the cisco.mib
- cipCardEntryIndex
- Index into cardTable (not physical chassis slot number, matches cisco chassis MIB cardindex).
- cipCardEntryName
- The configured name for the CMCC.
- cipCardDtrBrdIndex
- This indicates which daughter board is is being referenced for a particular CMCC card.
- cipCardDtrBrdType
- This indicates the channel path interface type.
- cipCardDtrBrdStatus
- cipCardDtrBrdStatus is true when the microcode for the daughter board has been successfully loaded and is executing, false otherwise.
- cipCardDtrBrdSignal
- For ESCON, cipCardDtrBrdSignal is true when light has been seen on the fiber and synchronization has been established, false otherwise. For the Parallel Channel Adapter (PCA) which provides the Bus and Tag connection, cipCardDtrBrdSignal is true when Oper ...
- cipCardDtrBrdOnline
- For ESCON, cipCardDtrBrdOnline is true when a path has been established with at least one channel, false otherwise. For PCA, cipCardDtrBrdOnline is true when the PCA is online to the channel. It will respond to at least one device address
- implicitIncidents
- This counts the number of times the ESCON Processor recovers from an internal error.
- codeViolationErrors
- The number of recognized code-violation errors. A trap is issued when this number exceeds the bit error rate threshold for ESCON. The bit error rate threshold is set at 15 error burst within a 5 minute period. An error burst is the time period of 1.5 seco ...
- linkFailureNOSs
- The number of link failures recognized as a result of the not-operational sequence (NOS).
- cipCardSubChannelIndex
- This indicates which subchannel is being referenced for a particular daughter board on a CMCC card. This value is constructed as follows: path * 256 + device Path and device are the values in CipCardClawConfigTable.
- cipCardSubChannelCancels
- Number of halt subchannels.
- cipCardSubChannelCuBusies
- This is the number of control unit busies sent to the channel when this device was requested.
- cipCardClawTable
- This table contains status and other information not covered in the following tables for the Common Link Access to Workstation (CLAW) protocol.
- cipCardClawEntry
- A list of CLAW values.
- cipCardClawIndex
- This indicates which CLAW link is being referenced for a particular subchannel on a daughter board on a CMCC card.
- cipCardClawConfigBroadcastEnable
- Control processing of broadcast frames for the path/device. Enable turns broadcast processing on.
- cipCardClawConfigRowStatus
- This object is used by a management station to create or delete the row entry in cipCardClawConfigTable following the RowStatus textual convention.
- ciscoChannelGroup
- A collection of objects providing configuration capability.
- ciscoChannelGroupRev1
- A collection of objects providing configuration capability.
- ciscoChannelGroupRev2
- A collection of objects providing configuration capability.
- ciscoChannelGroupRev3
- A collection of Subchannel device status objects.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
