CISCO-DOT11-HT-PHY-MIB

CISCO-DOT11-HT-PHY-MIB Download

MIBs list

This MIB is intended to be implemented on Cisco's WLAN devices that provide the wired uplink to wireless clients through the high-throughput dot11 radios compliant to the 802.11n specification. The MIB describes the PHY layer parameters of the 802.11n compliant radio interfaces.

IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for CISCO-DOT11-HT-PHY-MIB

cD11HtPhyAntennaTable
This table describes the antennas connected to the 802.11n interface. Entries in this table are created automatically by the agent corresponding to each 802.11n radio interface. There exists in this table, an entry corresponding to each entry in dot11PhyO ...
cD11HtPhyAntennaEntry
Each entry represents a conceptual row in cD11HtPhyAntennaTable and describes the antennas connected to the 802.11n interface.
cD11HtPhyAntennaSelectionImplemented
This object, when 'true', indicates that antenna selection is supported on this 802.11n interface.
cD11HtPhyXmitExpCSIFdbkASImplemented
This object, when 'true', indicates that transmit Antenna Selection based on explicit CSI feedback is supported on this 802.11n interface.
cD11HtPhyXmitIndFdbkASImplemented
This object, when 'true', indicates that the transmit antenna selection based on antenna indices feedback is supported on this 802.11n interface.
cD11HtPhyExplCSIFdbkASImplemented
This object, when 'true', indicates that the computation of CSI and feedback to support the peer to do antenna selection is supported on this 802.11n interface.
cD11HtPhyXmitIndCompFdbkASImplemented
This object is set to 'true' to indicate that the transmit antenna selection based on antenna indices selection computation and feedback the results to support the peer to do antenna selection is supported on this 802.11n interface.
cD11HtPhyRcvAntennaSelImplemented
This object is set to 'true' to indicate that the receive antenna selection is supported on this 802.11n interface.
cD11HtPhyXmitSoundPPDUImplemented
This object when set to 'true', indicates that the transmission of sounding PPDUs is supported on the 802.11n interface.
cD11HtPhyTable
This table represents the physical layer parameters of the 802.11n radio interface. Entries in this table are created automatically by the agent corresponding to each 802.11n interface. There exists in this table, an entry corresponding to each entry in d ...
cD11HtPhyEntry
Each entry represents a conceptual row in cD11HtPhyTable and corresponds to the support available for the various high-throughput capabilities on an 802.11n interface.
cD11HtPhyOperatingMode
This object represents the mode of operation of 802.11n interface at the physical layer. The semantics are as follows. legacy - In this mode, packets are transmitted in the legacy 802.11a/g format. mixed - In this mode, packets are transmitted with a pr ...
cD11HtPhyOperModeFrequency
This object represents the channel characteristics of the PHY. The semantics are as follows. legacyMode - The radio channel characteristics are the same as that of 802.11a/802.11g radios. htMode - The radio operates in either 40MHz bandwidth with one to ...
cD11HtPhyOperBand
This object represents the frequency band an 802.11n radio operates in. The semantics are as follows. 24GHz - The radio operates in the 2.4GHz frequency band. 5GHz - The radio operates in the 5 GHz frequency band.
cD11HtPhyFortyMHzOperationImplemented
This object, when set to 'true', indicates that the 40 MHz operation is implemented.
cD11HtPhyFortyMHzOperationEnabled
This object , when set to 'true', indicates that the 40 MHz Operation is enabled.
cD11HtPhyCurrentControlChannel
This object represents the operating channel. If 40 MHz mode is currently in use then this object indicates the control channel.
cD11HtPhyCurrentExtensionChannel
This object represents the channel extension offset. The semantics are as follows. noExtension - No extension channel is present and the radio operates in the 20MHz mode. extensionAbove - The extension channel is above the control channel. This is appli ...
cD11HtPhyExtChannelCCAImplemented
This object, when set to true, indicates that making a CCA on the extension channel is supported.
cD11HtPhyNumberOfSpatialStreamsImplemented
This object represents the maximum number of spatial streams implemented.
cD11HtPhyNumberOfSpatialStreamsEnabled
This object represents the maximum number of spatial streams enabled.
cD11HtPhyGreenFieldImplemented
This object, when set to 'true', indicates that the Greenfield option is implemented.
cD11HtPhyGreenFieldEnabled
This object, when set to 'true', indicates that the Greenfield option is enabled.
cD11HtPhyShortGIInTwentyImplemented
This object, when set to 'true', indicates that the Short-Guard option is implemented for 20 MHz operation.
cD11HtPhyShortGIInTwentyEnabled
This object, when set to 'true', indicates that the Short Guard option is enabled for 20 MHz operation.
cD11HtPhyShortGIInFortyImplemented
This object, when set to 'true', indicates that the Short Guard option is implemented for 40 MHz operation.
cD11HtPhyShortGIInFortyEnabled
This object, when set to 'true', indicates that the Short Guard option is enabled for 40 MHz operation.
cD11HtPhyAdvancedCodingImplemented
This object, when set to 'true', indicates that the Advanced Coding option is implemented.
cD11HtPhyAdvancedCodingEnabled
This object, when set to 'true', indicates that the Advanced Coding option is enabled.
cD11HtPhyTxSTBCImplemented
This object, when set to 'true', indicates that the entity is capable of transmitting frames using Space-Time Block Code (STBC) option.
cD11HtPhyTxSTBCEnabled
This object, when set to 'true', indicates that the entity's capability of transmitting frames using Space-Time Block Code (STBC) option is enabled.
cD11HtPhyRxSTBCImplemented
This object, when set to 'true', indicates that the entity is capable of receiving frames that are sent using the Space-Time Block Code (STBC).
cD11HtPhyRxSTBCEnabled
This object, when set to 'true', indicates that the entity's capability of receiving frames that are sent using the Space-Time Block Code (STBC) is enabled.
cD11HtPhyBeamFormingImplemented
This object, when set to 'true', indicates that the Beam Forming option is implemented.
cD11HtPhyBeamFormingEnabled
This object, when set to 'true', indicates that the BeamForming option is enabled.
cD11HtPhySupportedMCSTable
This table represents the transmit and receive MCS supported by the PLCP and PMD, represented by a count from 0 to 127, subject to limitations of each individual PHY. Entries in this table are created automatically by the agent corresponding to each 802. ...
cD11HtPhySupportedMCSEntry
Each entry represents a conceptual row in cD11HtPhySupportedMCSTable and describes the transmit and receive MCS supported on this 802.11n interface.
cD11HtPhySupportedMCSTxValue
This object represents the Transmit MCS supported by the PLCP and PMD.
cD11HtPhySupportedMCSRxValue
This object represents the Receive MCS supported by the PLCP and PMD.
cD11HtPhyTxBFConfigTable
This table describes the Transmit BeamForming capabilities of an 802.11n interface. Entries in this table are created automatically by the agent corresponding to each 802.11n interface. There exists in this table, an entry corresponding to each entry in d ...
cD11HtPhyTxBFConfigEntry
Each entry represents a conceptual row in cD11HtPhyTxBFConfigTable and corresponds to the Beamforming capabilities of an 802.11n interface.
cD11HtPhyRxStaggerSoundImplemented
This object, when set to 'true', indicates that the implementation supports the receiving of staggered sounding frames.
cD11HtPhyTxStaggerSoundImplemented
This object, when set to 'true', indicates that the implementation supports the transmission of staggered sounding frames.
cD11HtPhyRxZLFImplemented
This object, when set to 'true', indicates that the implementation is capable of receiving ZLF as sounding frames.
cD11HtPhyTxZLFImplemented
This object, when set to 'true', indicates that the implementation is capable of transmitting ZLF as sounding frames.
cD11HtPhyImplicitTxBFImplemented
This object, when set to 'true', indicates that the implementation is capable of applying implicit transmit beamforming.
cD11HtPhyCalibrationImplemented
This object indicates the level of calibration supported by the implementation. The semantics are follows. 'inCapable' - This station can't participate in a calibration procedure initiated by another station. 'unableToInitiate' - This station can involve ...
cD11HtPhyExplCSITxBFImplemented
This object, when set to 'true', indicates that implementation is capable of applying transmit beamforming using CSI explicit feedback in its transmission.
cD11HtPhyExplUncompSteerMatrixImplemented
This object, when set to 'true', indicates that implementation is capable of applying transmit beamforming using uncompressed steering matrix explicit feedback in its transmission.
cD11HtPhyExplBFCSIFdbkImplemented
This object indicates the level of CSI explicit feedback supported by the implementation.
cD11HtPhyExplUncompSteerMatrixFdbkImplemented
This object indicates the level of uncompressed steering matrix explicit feedback supported by the implementation.
cD11HtPhyExplCompSteerMatrixFdbkImplemented
This object indicates the level of uncompressed steering matrix explicit feedback returned by the implementation.
cD11HtPhyNumberBeamFormingCSISupportAntenna
This object indicates the maximum number of beamform antennas the beamformee can support when CSI feedback is required.
cD11HtPhyNumberUncompSteerMatrixSupportAntenna
This object indicates the maximum number of beamform antennas the beamformee can support when uncompressed steering matrix feedback is required.
cD11HtPhyNumberCompSteerMatrixSupportAntenna
This object indicates the maximum number of beamform antennas the beamformee can support when compressed steering matrix feedback is required.
cD11HtPhyEnhPowerTable
This table represents the transmission power characteristics specific to 802.11n radio interfaces. There exists in this table, an entry corresponding to each entry in dot11PhyOperationTable where dot11PHYType equals 'ht'(7).
cD11HtPhyEnhPowerEntry
Each entry represents a conceptual row in ccD11HtPhyEnhPowerTable and describes the transmission power characteristics specific to a 802.11n radio.
cD11HtPhyEnhPowerLevel20MHz
This object represents the power level of the 802.11n radio when operating at 20 MHz. A value of 0 indicates that the power level couldn't be determined at the time the agent is queried for an instance of this object.
cD11HtPhyEnhPowerLevel40MHz
This object represents the power level of the 802.11n radio when operating at 40 MHz. A value of 0 indicates that the power level couldn't be determined at the time the agent is queried for an instance of this object.
ciscoDot11HtPhyAntennaGroup
This collection of objects represent the antennae-related parameters.
ciscoDot11HtPhyConfigGroup
This collection of objects represent the operating parameters of the 802.11n radio at the physical layer.
ciscoDot11HtPhyMcsGroup
This collection of objects represent the MCS rates supported by the 802.11n radio.
ciscoDot11HtPhyTxBfGroup
This collection of objects represent the transmit BeamForming configuration on an 802.11n radio.
ciscoDot11HtPhyEnhPowerLevelsGroup
This collection of objects represents the transmission power characteristics specific to a 802.11n radio.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list