CISCO-DSL-PROVISION-MIB Download

cdslMaxNrps

Maximum number of the node routing processors (NRP) allowed in the system.

cdslNrpNumber

The number of NRPs that are present in this system.

cdslNrpIpAddressTable

This table reflects the IP addresses of each NRP in the system.

cdslNrpIpAddressEntry

These entries are used to store the IP Addresses of NRP cards that are inserted in the indexed slot. The IP addresses are used to access these cards.

cdslNrpSlotIndex

The object specifies the identifier of a slot containing a NRP.

cdslNrpIpAddress

The object specifies the IP addresses associated with the NRP contained in the slot identified by cdslNrpSlotIndex.

cdslVirtualTemplateNumberTable

This table reflects the number of virtual template that are presently set up in each NRP. A virtual template interface is a logical entity a configuration for a serial-interface but not tied to a physical interface - thatcan be applied dynamically as need ...

cdslVirtualTemplateNumberEntry

Entries are read only.

cdslMaxVirtualTemplates

The object specifies the maximum number of virtual templates allowed in one single NRP.

cdslVirtualTemplates

This object indicates the number of virtual templates presently set up in each NRP identified by cdslNrpSlotIndex.

cdslVirtualTemplateTable

This table includes the virtual templates in the NRP identified by cNrpSlotIndex. Though a virtual template is often called a virtual template interface, it is not reflected in the ifTable.

cdslVirtualTemplateEntry

User may create a new entry or delete an existing entry. Entries may be created without explicitly setting cdslVTRowStatus. While the row status is 'active', objects having read-create access can be changed.

cdslVTIndex

This object represents an arbitrary index used to identify the virtual template entry.

cdslVTIpAddressMethod

This object indicates how an IP address is obtained to be associated with this virtual template. The actual parameters of these methods are indicated by the objects defined after. none -- means no IP address associated. ipAddress -- means an expl ...

cdslVTIpAddress

This object specifies the IP address associated with this virtual template entry. This object is only valid when cdslVTIpAddressMethod is 'ipAddress'. To set the value correctly, this object shall be set in the same packet as cdslVTIpAddressMethod.

cdslVTIpAddressMask

This object specifies the IP address mask. This object is only valid when cdslVTIpAddressMethod is 'ipAddress'. To set the value correctly, this object shall be set in the same packet as cdslVTIpAddressMethod.

cdslVTIpIfIndex

This object specifies the ifIndex of the interface, whose IP address will be used for the virtual template entry. Any interface with an IP address in the routing processor can be selected. This object is only valid when cdslVTIpAddressMethod is 'interface ...

cdslVTPeerIpAddressMethod

This object indicates how an IP address is obtained when a peer requesting one. The actual parameters of these methods are indicated by the objects defined after. none -- means no IP address associated. negotiate -- obtains IP address from a pre-conf ...

cdslVTPeerIpAddrPool

This object is used to specify peer default local IP address pool name. This object is only valid when cdslVTPeerIpAddressMethod is 'ipAddressPool'. To set the value correctly, this object shall be set in the same packet as cdslVTPeerIpAddressMethod. If s ...

cdslVTPppAuthChap

This object is used to specify to use Challenge Handshake Authentication Protocol (CHAP) authentication method and the order it is used. The value zero indicates that CHAP is not used. See the description of object cdslVTPppAuthPap for the meaning of non- ...

cdslVTPppAuthMSChap

This object is used to specify the use of Microsoft's CHAP (MSCHAP) authentication method and the order it is used. The value zero indicates that MSCHAP is not used. See the description of object cdslVTPppAuthPap for the meaning of non-zero value.

cdslVTPppAuthPap

This object is used to specify whether to use Password Authentication Protocol (PAP) authentication method and the order it is used. This object is one of multiple objects used to specify authentication methods. The other authentication method objects ar ...

cdslVTPppChapHost

This object is used to specify the PPP CHAP host name.

cdslVTPppChapPassword

This object is used to specify the PPP CHAP password.

cdslVTPppChapEncrypType

This object is used to specify whether to encrypt the PPP CHAP password. Only effective when cdslVTPppChapPassword is non-empty.

cdslVTPppChapRefuse

The object is used to refuse CHAP authentication from peers requesting it. To disable this function set the value to no. RefuseCallinOnly indicating the system to refuse to answer CHAP authentication challenges received from the peer, but will still requi ...

cdslVTPppChapWaitPeer

This object is used to specify that the system will not authenticate to a peer requesting CHAP authentication until after the peer has authenticated to this system. To disable this function, set this object to 'false'. That is the system will handle the p ...

cdslVTPppPapUserName

This object is used to specify the PPP PAP user name that will be sent to a peer device. Please refer to the description of cdslVTPppPassword to see the interaction.

cdslVTPppPapPassword

This object is used to specify the PPP PAP authentication password. The system only utilizes the user name and password when both cdslVTPppUserName and cdslVTPppPassword are non-empty strings. To enforce this the following mechanism is applied. When both ...

cdslVTPppPapEncrypType

This object is used to specify whether to encrypt the PAP password. Only effective when cdslVTPppPapPassword is non-empty.

cdslVTPppUseTacacs

This object is used to specify whether to enable TACACS for PPP authentication. SingleLine means yes and plus to accept username and password in the username field that is in single line.

cdslVTRowStatus

This object is used to create a new row or modify or delete an existing row in this table.

cdslLocalIpAddrPoolNumberTable

This table indicates the number of IP address pools that are presently set up in each NRP.

cdslLocalIpAddrPoolNumberEntry

Entries are read only.

cdslMaxLocalIpAddrPools

Maximum number of local IP address pools allowed in a NRP.

cdslLocalIpAddrPools

The number of local IP address pools presently set up.

cdslLocalIpAddrPoolTable

This table defines the IP local address pool. An IP address pool may have a single entry in the table. The ranges of a pool are represented in the cdslLocalIPAddrRangeTable.

cdslLocalIpAddrPoolEntry

This list contains IP pool entry. The entry is read-only. The creation or the deletion of an entry will be a by-product of the entry in the cdslLocalIPAddrRangeTable. When an entry is created and activated in that table, an entry in this table will come i ...

cdslLocalIpAddrPoolName

A unique and non-empty string for the pool. The name can not be modified once created.

cdslLocalIpAddrPoolFreeAddresses

The number of IP addresses still available for use in the pool. Please notice that the number is for the whole pool, not for the individual range.

cdslLocalIpAddrPoolInUseAddresses

The number of addresses currently in use in the pool. Please notice that the number is for the whole pool, not for the individual range.

cdslLocalIpAddrRangeTable

This table defines the IP local address pool ranges. An IP address pool may have a single entry or multiple entries in the table, since an IP address pool can have multiple dis-continuous ranges. Each range will have a separate entry in the table.

cdslLocalIpAddrRangeEntry

This list contains IP pool range entry. User may create a new entry or delete an existing entry. When creating an entry, after its activation, an entry in the cdslLocalIpAddrPoolTable will exist if it is not already so. When destroying an entry, if the ra ...

cdslLocalIpAddrRangeLowAddr

The low range of this IP address pool range. This must be lower than the pool's high range.

cdslLocalIpAddrRangeHighAddr

The high range of this IP address pool range. This must be higher than the pool's low range.

cdslLocalIpAddrRangeRowStatus

This object is used to create a new row or delete an existing row in this table.

cdslPppOverAtmPvcNumberTable

This table reflects the number of PVCs of PPP encapsulation presently set up in each NRP.

cdslPppOverAtmPvcNumberEntry

Each entry represents the responding NRP.

cdslPppOverAtmPvcs

The number of atm pvcs that are presently set up with PPP encapsulation. The number of all atm PVCs and the maximum number of PVCs are provided by AToM Mib.

cdslAtmPvcTable

This table includes configuration parameters for ATM PVCs with PPP encapsulation. The vc-mode ATM PVC management approach is used as the PVC creating method, which greatly simplifies configuration by using of vc-class. The PVCs which were created using at ...

cdslAtmPvcEntry

The IfIndex by which the table is indexed, is the ATM interface index in which the PVC is created. The only object that is allowed to change the value while the row status is 'active' is cdslAtmPvcClass. Please refer to the description of cdslAtmPvcRowSta ...

cdslAtmPvcVpi

The virtual path identifier of the PVC. Please note that it is routing processor's VPI number.

cdslAtmPvcVci

The virtual channel identifier of the PVC. Please note that it is routing processor's VCI number.

cdslAtmPvcName

This object can be used to identify the PVC. Unique name for each PVC is desired if assigned.

cdslAtmPvcSubIfNumber

This object indicates the ios sub-interface number if this PVC belongs to an atm sub-interface. Once the pvc exists, the value can not be modified. If the PVC is created under the ATM interface level and not a subinterface level, the object shall be zero.

cdslAtmPvcClass

This object indicates the vc-class to inherit when the named vc-class exists. If the object is to set into an empty string, the default value 'default-vc-class' will be used. If the 'default-vc-class' class does exist, it will be created and the encapsul ...

cdslAtmPvcQosType

Quality of Service type of this PVC.

cdslAtmPvcAbrPCR

Availabe bit rate (Abr) peak cell rate(PCR) of this PVC.

cdslAtmPvcAbrMCR

Abr Minimum Guaranteed Cell Rate(MCR) of this PVC.

cdslAtmPvcAbrIORIF

Abr inverse of rate increase factor (1/rif) of this PVC.

cdslAtmPvcAbrIORDF

Abr inverse of rate decrease factor (1/rdf) of this PVC.

cdslAtmPvcBroadcast

This object indicates whether to allow broadcast or not.

cdslAtmPvcEncapsulation

This object indicates encapsulation method of this PVC.

cdslAtmPvcMuxLinkType

This object can be used to This object is used to specify the link type if the encapsulation is aal5mux. 1 -- ip and 2 -- ppp.

cdslAtmPvcVirtualTemplate

The virtual template number configured for the PVC.

cdslAtmPvcILMIManage

This object indicates whether to ilmi manage or not.

cdslAtmPvcInarp

This object indicates the InARP Frequency in minutes (Only meaningful in aal5snap encapsulation).

cdslAtmPvcOamRetryUpCount

This object indicates the OAM retry count before declaring a VC is up.

cdslAtmPvcOamRetryDownCount

This object indicates the OAM retry count before declaring a VC is down.

cdslAtmPvcOamPvcManaged

This object indicates whether to enable VC management on OAM in this PVC.

cdslAtmPvcOamPvcLF

This object indicates the OAM loopback frequency(seconds) for this PVC.

cdslAtmPvcProtocolIpBC

Pseudo-broadcast on the protocol IP inarp connections or not (Only meaningful in aal5snap encapsulation).

cdslAtmPvcProtocolIpxBC

This object indicates whether to allow Pseudo-broadcast on the protocol IPX inarp connections or not (Only meaningful in aal5snap encapsulation).

cdslAtmPvcUbrPCR

This object indicates the Ubr Peak Cell Rate.

cdslAtmPvcUbrPlusPCR

This object indicates the Ubr+ Peak Cell Rate.

cdslAtmPvcUbrPlusMCR

This object indicates the Ubr+ Minimum Guaranteed Cell Rate.

cdslAtmPvcVbrNrtPCR

This object indicates the Vbr-Nrt Peak Cell Rate.

cdslAtmPvcVbrNrtSCR

This object indicates the Vbr-Nrt Sustainable Cell Rate.

cdslAtmPvcRowStatus

This object is used to create a new row or modify or delete an existing row in this table. When the row is created, but the minimun set of parameters is not all set, the status is 'notReady'. There is no PVC corresponding to it. The minimum set of paramet ...

cdslVcClassNumberTable

This table reflects the number of VC classes that are presently set up in each NRP.

cdslVcClassNumberEntry

Entries are read only.

cdslMaxVcClasses

This object indicates the maximum number of VC classes allowed.

cdslVcClasses

This object indicates the number of VC classes presently set in each NRP identified by cdslNrpSlotIndex.

cdslVcClassTable

The entries in this table are vc-classes with at least one parameter configured. In other words, empty classes (with name only) will not be present in this table.

cdslVcClassEntry

The VC Class entry is read-create. Each entry represents a VC class.

cdslVcClassName

This object is used to identify the vc class.

cdslVcClassType

This object indicates the type of the vc class. Atm is for Asynchronous transfer mode and funi for frame user network interface.

cdslVcClassQosType

This object specifies the QOS type of the vc class.

cdslVcClassAbrPCR

This object specifies Abr Peak Cell Rate.

cdslVcClassAbrMcr

This object specifies Minimum Guaranteed Cell Rate. It shall be smaller than cdslVcClassAbrPCR.

cdslVcClassAbrIORIF

This object specifies Abr inverse of rate increase factor (1/rif) to the power of two. Note that the actual value in the system is the power of two of this object. That is, for example, a value 5 of this object means 2**5 = 32 in the system for AbrIORIF. ...

cdslVcClassAbrIORDF

Abr inverse of rate decrease factor (1/rdf) to the power of two. Note that the actual value is the power of two of this object. For example, value 5 of this object means 2**5 = 32. Range (0..15) to the power of two is the range (1..32768).

cdslVcClassBroadcast

This object indicates whether to allow broadcast or not. When set the value, do not use unknown.

cdslVcClassEncapsulation

This object specifies encapsulation method.

cdslVcClassMuxLinkType

This object is used to specify the link type if the encapsulation is aal5mux. 1 for IP and 2 for PPP.

cdslVcClassVirtualTemplate

The virtual template number. Value zero means not configured.

cdslVcClassIdleTimeout

This object specifies idle timeout.

cdslVcClassIdleMTR

This object specifies the minimum traffic rate to keep the connection.

cdslVcClassILMIManage

This object specifies whether to allow ilmi manage or not. When set the value, do not use unknown.

cdslVcClassInarp

This object specifies InARP Frequency in minutes.

cdslVcClassOamRetryUpCount

OAM retry count before declaring a VC is up

cdslVcClassOamRetryDownCount

OAM retry count before declaring a VC is down

cdslVcClassOamPvcManaged

This object specifies whether to enable VC management on OAM in a PVC. When set the value, do not use unknown.

cdslVcClassOamPvcLF

This object specifies the OAM loopback frequency.

cdslVcClassOamSvcManaged

This object specifies whether to enable VC management on OAM on SVC SVC. When set the value, do not use unknown.

cdslVcClassOamSvcLF

This object specifies the OAM loopback frequency for SVC

cdslVcClassProtocolIpBC

This object specifies whether to allow the pseudo-broadcast on the protocol IP inarp connections or not.

cdslVcClassProtocolIpxBC

This object specifies whether to allow the pseudo-broadcast on the protocol IPX inarp connections or not.

cdslVcClassTransmitPriority

This object specifies the transmit priority.

cdslVcClassUbrPCR

This object specifies the Ubr Peak Cell Rate.

cdslVcClassUbrInputPCR

This object specifies the Ubr Input Peak Cell Rate.

cdslVcClassUbrPlusPCR

This object specifies the Ubr+ Peak Cell Rate.

cdslVcClassUbrPlusMCR

This object specifies the Ubr+ Minimum Guaranteed Cell Rate. It shall be smaller than cdslVcClassUbrPlusPCR.

cdslVcClassUbrPlusInputPCR

This object specifies the Ubr+ Input Peak Cell Rate.

cdslVcClassUbrPlusInputMCR

This object specifies the Ubr+ Input Minimum Cell Rate. It shall be smaller than cdslVcClassUbrPlusInputPCR.

cdslVcClassVbrNrtPCR

This object specifies the Vbr-Nrt Peak Cell Rate.

cdslVcClassVbrNrtSCR

This object specifies the Vbr-Nrt Sustainable Cell Rate. It shall be smaller than cdslVcClassVbrNrtPCR.

cdslVcClassVbrNrtInputBP

This object specifies the Vbr-Nrt Input Burst Parameter: rounded on AIP to the nearest 32, used as is on NPM.

cdslVcClassVbrNrtInputPCR

This object specifies the Vbr-Nrt Input Peak Cell Rate.

cdslVcClassVbrNrtInputSCR

This object specifies the Vbr-Nrt Input Sustainable Cell Rate. It shall be smaller than cdslVcClassVbrNrtInputPCR.

cdslVcClassVbrNrtInputMBS

This object specifies the Input Maximum Burst Size.

cdslVcClassRowStatus

This object is used to create a new row or modify or delete an existing row in this table. The return value of this object is always 'active', if the row exists. To delete the row, set the value to 'destroy'. When creating a new row, 'createAndGo' is the ...

ciscoNrpSlotGroup

The DSL Provision NRP Slot Group.

ciscoVirtualTemplateGroup

The DSL Provision Virtual Template Interface Group.

ciscoIpPoolGroup

The DSL Provision IP Pool Group.

ciscoDslPVCGroup

The DSL Provision PVC Group.

ciscoVcClassGroup

The DSL Provision VC Class Group.