CISCO-IETF-DOT11-QOS-MIB

CISCO-IETF-DOT11-QOS-MIB Download

MIBs list

This MIB module provides network management support for QoS on wireless LAN devices. All objects defined in this MIB are listed (object names have been modified to adopt Cisco MIB object naming convention) in the IEEE 802.11E November 2001 draft. The original names of the objects in the standard are included in the REFERENCE clauses. The standard is still under development. The standard IEEE 802.11E MIB can replace some of the MIB objects in this MIB once the standard is finalized.

IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for CISCO-IETF-DOT11-QOS-MIB

cid11QosConfigTable
This table contains the basic set of attributes to configure QoS for a wireless LAN device. This table has a sparse dependent relationship with the ifTable. Each IEEE 802.11 wireless interface has a set of configuration parameters for each IP network traf ...
cid11QosConfigEntry
Each entry contains parameters to configure traffic contention window, AIFS, priority and MSDU lifetime for each traffic category on an IEEE 802.11 interface.
cid11TrafficCategory
This object specifies the traffic category.
cid11CWmin
This specifies the minimum contention window value for a traffic category. The backoff interval of a radio is calculated from a pseudo random integer drawn from a uniform distribution over the interval [1, CW+1], where CW is an integer within the range of ...
cid11CWmax
This object specifies the maximum contention window value for a traffic category. The backoff interval of a radio is calculated from a pseudo random integer drawn from a uniform distribution over the interval [1, CW+1], where CW is an integer within the r ...
cid11CWPFactor
This object specifies the contention window persistence factor for a traffic category.
cid11AIFS
This object specifies the AIFS for a traffic category.
cid11TrafficPriority
This object specifies the actual priority this agent is going to use to delivery packets for a traffic category. This allows multiple traffic categories to map to the same priority level. The priority 7 is the highest priority and priority 1 is the lowest ...
cid11MSDULifetime
This object specifies the MSDU lifetime for a traffic category.
cid11QosSupportTable
This table contains the attributes indicating QoS support information on the IEEE 802.11 interfaces of the device. This table has a sparse dependent relationship with the ifTable. For each entry in this table, there exists an entry in the ifTable of ifTyp ...
cid11QosSupportEntry
Each entry contains attributes to indicate if Qos and priority queue are supported for an IEEE 802.11 interface.
cid11QosOptionImplemented
This object indicates if QoS is supported on this IEEE 802.11 network interface.
cid11QueuesAvailable
This object shows the number of QoS priority queues are available on this IEEE 802.11 network interface.
cid11QueueTable
This table contains the queue weight and size information and statistics for each traffic category on each the IEEE 802.11 interface. This table has a sparse dependent relationship with the ifTable. For each entry in this table, there exists an entry in t ...
cid11QueueEntry
Each entry contains the current queue weight, size, and peak size information for each traffic category on an IEEE 802.11 interface.
cid11QueueSize
This is the current QoS priority queue size for the traffic category.
cid11QueuePeakSize
This is the peak QoS priority queue size for the traffic category.
cid11QosStatisticsTable
This table contains the QoS statistics by traffic category on each the IEEE 802.11 network interface. This table has a sparse dependent relationship with the ifTable. For each entry in this table, there exists an entry in the ifTable of ifType ieee80211(7 ...
cid11QosStatisticsEntry
Each entry contain QoS statistics for data transmission and receive for each traffic category on an IEEE 802.11 interface.
cid11QosReceivedMPDUs
This is the counter for QoS MPDUs received on this IEEE 802.11 interface for the traffic category.
cid11QosReceivedRetries
This is the counter for Qos retries received on this IEEE 802.11 interface for the traffic category.
cid11QosDiscardedFrames
This is the counter for Qos discarded frames transmitting from this IEEE 802.11 interface for the traffic category.
cid11QosTransmittedFragments
This is the counter for Qos fragments transmitted this IEEE 802.11 interface for the traffic category.
cid11QosFails
This is the counter for Qos failures on this IEEE 802.11 interface for the traffic category.
cid11QosRetries
This is the counter for Qos retries performed on this IEEE 802.11 interface for the traffic category.
cid11QosMutipleRetries
This is the counter for Qos multiple retries performed on this IEEE 802.11 interface for the traffic category.
cid11QosFrameDuplicates
This is the counter for Qos frame duplications performed on this IEEE 802.11 interface for the traffic category.
cid11QosReceivedFragments
This is the counter for Qos fragments received on this IEEE 802.11 interface for the traffic category.
cid11QosTransmittedFrames
This is the counter for Qos frames transmitted from this IEEE 802.11 interface for the traffic category.
cid11QosIfStatisticsTable
This table contains the attributes indicating QoS statistics on the IEEE 802.11 interfaces of the device. This table has a sparse dependent relationship with the ifTable. For each entry in this table, there exists an entry in the ifTable of ifType ieee802 ...
cid11QosIfStatisticsEntry
Each entry contains attributes to support QoS statistics on an IEEE 802.11 interface.
cid11QosIfDiscardedFragments
This object counts the number of QoS discarded transmitting fragments.
ciscoIetfDot11QosConfigGroup
Configurations for IEEE 802.11 QoS.
ciscoIetfDot11QosQueueGroup
Configurations and statistics for IEEE 802.11 QoS queue.
ciscoIetfDot11QosStatsGroup
Status and statistics for IEEE 802.11 QoS.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list