CISCO-IMA-MIB

CISCO-IMA-MIB Download

MIBs list

The MIB module describes Cisco IMA objects. This is an extension to the standard of ATM Forum IMA version 1.1, AF-PHY-0086.001 Spec. atmfImaMib.

IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for CISCO-IMA-MIB

cimaGrpAlarmType
The notification object identifies the Cisco IMA group alarm.
cimaLinkAlarmType
The notification object identifies the Cisco IMA link alarm.
cimaGroupTable
The Cisco IMA group table. This table contains Cisco extension objects for the imaGroupTable. Each entry in the table contains Cisco specific configuration, control, and status information for each IMA group.
cimaGroupEntry
An entry in the table containing additional management information applicable to a Cisco card/platform. When an entry is successfully created here, an entry in interfaces table is created with ifType value of atmIma(107), ifAdminStatus value of down(2), i ...
cimaGroupAccumulatedDelay
This object indicates the amount of data per link that is accumulated in the DCBs of the IMA group. This is a result of deleting the slowest link of the IMA group.
cimaGroupClearAccDelay
This object indicates whether or not to clear accumulated delays of the IMA group. When the delay is cleared, the group DCBs are cleared such that the current slowest link in the group does not have any data accumulated in its DCB. As a result of this act ...
cimaStuffAndCellIndication
This object specifies LSI bits 0-2. A combination of lsibit2, lsibit1, and lsibit0 indicates stuff event: -- 000 This is one out of the 2 ICP cells -- 001 Stuff event at the next PCP cell location -- 010 Stuff event in 2 ICP cell locations -- 011 Stuff ev ...
cimaGrpIntegrationUpTime
Integration time for the group UP status. The Group is declared to be UP if the status is UP persistently for the amount to time specified. The group changes to UP status immediately if 0 is specified.
cimaGrpIntegrationDownTime
Integration time for the group DOWN status. The Group is declared to be DOWN if the status is DOWN persistently for the amount to time specified. The group changes to UP status immediately if 0 is specified.
cimaGrpNumTxIcpCells
Number of error-free transmitted ICP cells in the IMA group.
cimaGrpNumRxIcpCells
Number of error-free received ICP cells in the IMA group.
cimaGrpNumRxErrIcpCells
Number of Errored ICP Cells received on this IMA group. Errored ICP Cell is defined as: a cell with HEC or CRC error at an expected ICP cell position if it is not a missing cell.
cimaGrpNumRxInvalidIcpCells
Number of Invalid ICP Cells received on this IMA group. Invalid ICP Cell is defined as: Cell with good HEC & CRC and CID = ICP at expected frame position with (unexpected IMA OAM Label) or (unexpected LID) or (unexpected IMA ID) or (received M not equal t ...
cimaGrpNumRxMissingIcpCells
Number of Missing ICP Cells at the expected ICP cell position on this IMA group.
cimaGrpNumTxMissingIcpCells
Number of ICP cells that could not be transmitted on this IMA group due to lack of resources, e.g. buffers.
cimaGrpRestarting
The object controls if the IMA group restart is to be executed. During this operation the Group bringup procedure is restarted and the group will have to go through all the state transitions before it is declared Active. true(1) - restarting the IMA grou ...
cimaGrpNeVersion
This object specifies IMA group version at the near end. others(1) no available version10(2) IMA 1.0 version11(3) IMA 1.1
cimaGrpMaxCellRate
This object indicates the IMA group's high water mark cell rate. The value is the same as the IDCR with all configured links in the 'active' state. It is derived according to the following equation: T1 based group = N * (3622 * (M-1)/M * 2048/2049) E1 bas ...
cimaGrpVerFallbackEnable
This object controls the IMA version fallback support. Setting this object to true(1) will enable the fallback support. Setting this to false(2) will disable the fallback support.
cimaGrpAutoRestartMode
This object specifies IMA unit sync up with FE behaviour. disable(1) auto-restart feature is disabled. relearn(2) In this mode, when IMA unit is restarted, the IMA unit ignores the expected IMA ID defined by cimaGrpRxImaIdExpected, and relearns the FE I ...
cimaGrpRxImaIdExpected
This object specifies the expected FE IMA ID or learned IMA ID. It is an extension to IMA-MIB's read-only object imaGroupRxImaId. The valid IMA ID range is from 0 to 255. The value '-1' of this object indicates an undetermined FE IMA ID. The following are ...
cimaGrpAutoRestartSyncState
This object indicates the IMA group auto restart synchronization state. When the group auto-restart feature is enabled, the IMA unit runs in an enhanced IMA GSM mode. The object transits to one of following four states: disable auto-restart is disabl ...
cimaLinkMappingTable
The link mapping table is an IMA group oriented mapping table which associates an IMA group to its corresponding IMA links. It provides an efficient way of accessing to IMA links based on the knowledge of an IMA group. This is a read-only mapping table. T ...
cimaLinkMappingEntry
An entry in the table containing an IMA group oriented mapping from 'imaGroupIndex' to 'imaLinkIfIndex'.
cimaLinkState
This object indicates whether the IMA link is in active(1) state or nonactive(2) state.
cimaLinkTable
The Cisco IMA link table. This table has Cisco specific configuration, and status management information for IMA links.
cimaLinkEntry
An entry in the table, containing status and configuration information of an IMA link.
cimaLinkLifIntUpTime
IMA LIF integration up time. The agent declares LIF alarm immediately if 0 is specified.
cimaLinkLifIntDownTime
IMA LIF integration down time. The agent undeclares LIF alarm immediately if 0 is specified.
cimaLinkLodsIntUpTime
IMA LODS integration up time. The agent declares LODS alarm immediately if 0 is specified.
cimaLinkLodsIntDownTime
IMA LODS integration down time. The agent undeclares IMA LODS alarm immediately if 0 is specified.
cimaLinkNumTxIcpCells
Number of error-free transmitted ICP cells on this link of the IMA group.
cimaLinkNumRxIcpCells
Number of error-free received ICP cells on this link of the IMA group.
cimaLinkNumRxErrIcpCells
Number of Errored ICP Cell received on this link of the IMA group. Errored ICP Cell is defined as: a cell with HEC or CRC error at an expected ICP cell position if it is not a missing cell.
cimaLinkNumRxInvalidIcpCells
Number of Invalid ICP Cell received on this link of the IMA group. Invalid ICP Cell is defined as: Cell with good HEC & CRC and CID = ICP at expected frame position with (unexpected IMA OAM Label) or (unexpected LID) or (unexpected IMA ID) or (received M ...
cimaLinkNumRxMissingIcpCells
Number of Missing ICP Cell at the expected ICP cell position on this link of the IMA group
cimaLinkNumTxMissingIcpCells
Number of ICP cells that could not be transmitted on this link of the IMA group due to lack of resources (buffers).
cimaFeatureTable
The Cisco IMA feature table. This table provides IMA features supported in a Cisco card. Any SNMP set to the writable object has card wide impact on all IMA groups and IMA links.
cimaFeatureEntry
An entry in the table containing IMA features supported and additional information applicable to a physical entity with class 'module(9)'.
cimaMaxImaGroupsSupported
This object represents the maximum number of IMA Groups supported.
cimaConfiguredImaGroups
This object represents the current number of IMA Groups configured.
cimaMinGrpTxImaId
This object specifies the minimum value of the IMA ID range supported.
cimaMaxGrpTxImaId
This object specifies the maximum value of the IMA ID range supported.
cimaVerFallbackEnable
This object controls the IMA version fallback support. Setting this object to true(1) will enable the fallback support. Setting this to false(2) will disable the fallback support. Any set to this object has an impact on all the IMA groups configured.
cimaAutoRestartEnable
This object specifies IMA unit restart behaviour. By default, the IMA unit runs in the standard GSM mode. If the object is set to 'true', the IMA unit will be in auto restart mode running with an enhanced IMA GSM. The usage of loopbacks is an essential pa ...
ciscoImaGroupGroup
A set of objects providing configuration and status information for a Cisco IMA extension group definition.
ciscoImaLinkGroup
A set of objects providing status information for a Cisco IMA extension link.
ciscoImaLinkMappingGroup
A set of objects providing IMA group to IMA link lookup and IMA link state.
ciscoImaAlarmGroup
A set of objects used in the notification of Cisco IMA group and link alarms.
ciscoImaFeatureGroup
A set of objects providing IMA feature information and configurations.
ciscoImaAutoRestartGroup
A set of objects providing IMA group auto-restart feature configuration and status information.
ciscoImaVerFallbackSupportGroup
A set of objects providing IMA group version fallback control support.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list