CISCO-IVR-MIB Download

civrFcidNatMode

Enable FCID and VSAN identifier translation cross VSAN boundaries. If the value is 'true', the VSAN identifier as well as the entire FCID of the end-devices would be modified as frames cross VSAN boundaries.

civrVsanTopologyAutoDisc

Enable automatic VSAN topology discovery. If this value is 'true', automatic VSAN topology discovery is turned on. IVR processes would communicate with each other to provide a global view of the physical topology to all the IVR enabled switches. VSAN to ...

civrZoneSetNumber

The number of entries currently present in the civrZoneSetTable.

civrZoneSetTable

A table containing information on each Inter-VSAN (IV) zonesets which are configured locally. It comprises the zonesets in the full IV zone database. There could be multiple IV zonesets configured. But only one zoneset is allowed to be active at a time. A ...

civrZoneSetEntry

An entry (conceptual row) in the civrZoneSetTable. The sequence of operations to be performed in order to create a zoneset is as follows: - create zone entries in the civrZoneTable. - create an entry in this table and set the civrZoneSetZoneList bitmap ob ...

civrZoneSetIndex

The index of a zoneset. This object uniquely identifies an IV zoneset. This object could have the same value as civrZoneSetTableNextIndex.

civrZoneSetName

The name of this zoneset. The civrZoneSetName should be unique on this device. This object cannot be modified while the corresponding value of civrZoneSetRowStatus is equal to 'active'. This object MUST be set before or concurrently with setting the corre ...

civrZoneSetZoneList

The set of IV zones which form this zoneset. The IV zones are identified by civrZoneIndex object in the civrZoneTable. If a particular bit has a value of '1', then the corresponding zone is a part of this zoneset. All other zones have '0' in their positio ...

civrZoneSetLastChange

The value of sysUpTime at the time of the last change to this IV zoneset entry. If the entry has not been modified since the last re-initialization of the local network management system, then this object will contain a zero value.

civrZoneSetChecksum

The checksum of content of this zoneset.

civrZoneSetRowStatus

The status of this conceptual row. This object can not be set to 'active' unless the corresponding value of civrZoneSetName is unique.

civrZoneSetActivate

Setting this object to a value is a request for a particular IV zoneset to be activated on this device. i.e., for the current configuration of that zoneset to be cloned with the clone becoming the active zoneset. Setting this object to a value (say, N) id ...

civrZoneSetActvatDeactvatResult

This object indicates the outcome of the most recent activation/deactivation. activateSuccess - activation success activateFailureNoMembers - activation failure because of no members in the zoneset activateFailureZoneOneorLessMem - ...

civrZoneSetDeActivate

Setting this object to 'deactivate' is a request to deactivate the currently active IV zoneset. deactivate - deactivate IV zoneset noop - no operation No action is taken if this object is set to 'noop'. The value of this object when read is always ...

civrZonesetDbChecksum

The checksum of the full IV zone database.

civrActiveZonesetChecksum

The checksum of the enforced (active) IV zoneset.

civrZoneNumber

The number of entries currently present in the civrZoneTable.

civrZoneTable

This table gives information on all the IV zones and lists all their members. IV zones is group of IV members (FC devices like hosts, disks) in different VSANs.

civrZoneEntry

An entry (conceptual row) in the civrZoneTable. These are the zones in the full IV zone database. The sequence of operations to be performed in order to create a IV Zone is as follows: - create an entry in this table. - create IV zone members in the civrZ ...

civrZoneIndex

The index of an IV Zone. This object could have the same value as civrZoneTableNextIndex.

civrZoneName

The name of this zone. The zoneName should be unique this device. This object can not be modified while the corresponding value of civrZoneRowStatus is 'active'. This object MUST be set before or concurrently with setting the corresponding instance of civ ...

civrZoneMemberList

The set of IV Zone members that form this IV zone. The IV zone members are identified by civrZoneMemberIndex object in the civrZoneMemberTable. If a particular bit has a value of '1', then the corresponding zone member is a part of this zone. All other zo ...

civrZoneLastChange

The value of sysUpTime at the time of the last change to this IV zone entry. If the entry has not been modified since the last re-initialization of the local network management system, then this object will contain a zero value.

civrZoneRowStatus

The status of this conceptual row. This object can not be set to 'active' unless the corresponding value of zoneName is unique on this device.

civrZoneReadOnly

This object indicates if only SCSI read operations are allowed on members of this IV zone which are SCSI targets. If this object is set to 'true', then only SCSI read operations are permitted. So, this IV zone becomes a read-only IV zone. If this object i ...

civrZoneQosPriority

This object specifies if qos attribute for this IV zone is enabled. If this object is set to a value other than 'none', then qos attribute for this IV zone is enabled. If this object is set to 'none', then qos attribute for this IV zone is disabled. If t ...

civrZoneMemberNumber

The number of entries currently present in the civrZoneMemberTable.

civrZoneMemberTable

This table contains all members of all the IV Zones in the civrZoneTable and information about those members. These are the members part of full IV zone database.

civrZoneMemberEntry

An entry (conceptual row) in the civrZoneMemberTable. Each entry represents the relationship between a member and (one of) its 'parent(s)', i.e., an IV zone to which the member belongs to.

civrZoneMemberParentIndex

This object contains the value of the index of the IV zone to which this member belongs to.

civrZoneMemberIndex

The index of this IV zone member on this IV zone.

civrZoneMemberType

The type of IV Zone member. This object cannot be modified while the corresponding value of civrZoneMemberRowStatus object is 'active'.

civrZoneMemberID

This object represents the IV zone member ID. If civrZoneMemberType is 'pwwnVsan', this object contains port WWN. This object cannot be modified while the corresponding value of civrZoneMemberRowStatus object is 'active'.

civrZoneMemberAFId

The Autonomous Fabric identifier of this IV zone member. This object cannot be modified while the corresponding value of civrZoneMemberRowStatus object is 'active'.

civrZoneMemberVsan

The VSAN of this IV zone member. This object cannot be modified while the corresponding value of civrZoneMemberRowStatus object is 'active'.

civrZoneMemberRowStatus

The status of this conceptual row. civrMemberType, civrZoneMemberID and civrZoneMemberVsan objects MUST be set before or concurrently with setting the corresponding instance of civrZoneMemberRowStatus to 'active'.

civrZoneMemberLunID

This object specifies the Lun ID if IV Lun zoning is configured. If this object is the zero-length string, then IV Lun zoning is not configured. This object cannot be modified while the corresponding value of zoneMemberRowStatus object is 'active'.

civrZoneEnforcedZoneSetName

The name of the enforced IV zoneset.

civrZoneEnforcedZoneSetZoneList

The set of IV zones which form this IV zoneset. This object was copied from the civrZoneSetZoneList object in the civrZoneSetTable at the time when the currently active zoneset was activated.

civrZoneEnforcedZoneSetActvtTime

The sysUpTime at which enforced zoneset was most recently activated. If this entry has been activated prior to the last re-initialization of the local network management system, then this object will contain a zero value.

civrZoneCopyZoneSetEnforcdToFull

This object copies the enforced IV zoneset (active IV zoneset) into the full IV zone database Setting this object to 'copy' will trigger the copy of the enforced IV zoneset to the full IV zone database. If there is no enforced IV zoneset, the copy will re ...

civrZoneClearFullZoneDb

This object clears the full IVR zone database. Setting this object to 'clear' will clear the full IV zone database. No action is taken if this object is set to 'noOp'.

civrZonesetActivateForce

The force option for IV zoneset activation. Following things are done if this object is 'true': - If there is no regular active zoneset in a VSAN (no entry present zoneEnforcedZoneSetTable from CISCO-ZS-MIB for that VSAN), then a regular active zoneset wi ...

civrZoneSetTableNextIndex

This object specifies the next available index for object civrZoneSetIndex which can be used for creating an entry in civrZoneSetTable.

civrZoneEnforcedZoneNumber

The number of entries currently present in the civrZoneEnforcedZoneTable.

civrZoneEnforcedZoneTable

This table contains all the IV zones that are present in the active IV zoneset.

civrZoneEnforcedZoneEntry

An entry (conceptual row) in this table.

civrZoneEnforcedZoneName

The name of this zone.

civrZoneEnforcedZoneMemberList

The set of members that form this IV zone. This object was copied from the civrZoneMemberList object in the civrZoneTable at the time when the currently active zoneset was activated.

civrZoneEnforcedZoneReadOnly

This object indicates whether this is a read-only IV zone. This object was copied from the civrZoneReadOnly object in the civrZoneTable at the time when the currently active zoneset was activated.

civrZoneEnforcedZoneQosPriority

This object indicates whether this is a qos enabled IV zone. This object was copied from the civrZoneQosPriority object in the civrZoneTable at the time when the currently active zoneset was activated.

civrZoneTableNextIndex

This object specifies the next available index for object civrZoneIndex which can be used for creating an entry in civrZoneTable.

civrZoneEnforcedZoneMemberNumber

The number of entries currently present in the civrZoneEnforcedZoneMemberTable.

civrZoneEnforcedZoneMemberTable

This table contains all members that are part of a IV zone and are part of the active IV zone set.

civrZoneEnforcedZoneMemberEntry

An entry (conceptual row) in this table.

civrZoneEnforcedZoneMemberType

The type of IV zone member. This object was copied from the civrZoneMemberType object in the civrZoneMemberTable at the time when the currently active zoneset was activated.

civrZoneEnforcedZoneMemberID

This object represents this member's address. This object was copied from the civrZoneMemberID object in the civrZoneMemberTable at the time when the currently active zoneset was activated.

civrZoneEnforcedZoneMemberAFId

The Autonomous Fabric identifier of the member. This object was copied from the civrZoneMemberAFId object in the civrZoneMemberTable at the time when the currently active zoneset was activated.

civrZoneEnforcedZoneMemberVsan

The VSAN of the member. This object was copied from the civrZoneMemberVsan object in the civrZoneMemberTable at the time when the currently active zoneset was activated.

civrZoneEnforcedZoneMemberLunID

This object specifies the Lun ID if IV Lun zoning is configured. This object was copied from the civrZoneMemberLunID object in the civrZoneMemberTable at the time when the currently active zoneset was activated.

civrZoneSetStatusTable

A table containing status of the current active IV Zoneset on each local VSANs.

civrZoneSetStatusEntry

An entry (conceptual row) in the civrZoneSetStatusTable.

civrZoneSetStatus

Status of the active IV Zoneset on this VSAN. idle - idle active - active deactive - deactive defaultZoneDeny - activation failed because of default zone behavi ...

civrTopologyConfiguredChecksum

The checksum of the configured IVR topology.

civrTopologyConfigTable

This table contains the configured IVR topology. The topology is specified in terms of one or more Autonomous Fabrics made of switches and the VSANs to/from which the switches provide connectivity. The configured topology is not applied until it is made a ...

civrTopologyConfigEntry

An entry (conceptual row) in this table.

civrTopologyConfigSwitchWwn

The configured switch WWN of this device.

civrTopologyConfigAutoFabricId

The configured Autonomous Fabric id of this device.

civrTopologyConfigSwitchVsan2k

The list of configured VSANs that are part of IVR topology on this device. Each octet within the value of this object specifies a set of eight VSANs, with the first octet specifying VSANs 0 through 7, the second octet specifying VSANs 8 through 15, etc. W ...

civrTopologyConfigSwitchVsan4k

The list of configured VSANs that are part of IVR topology on this device. Each octet within the value of this object specifies a set of eight VSANs, with the first octet specifying VSANs 2047 through 2054, the second octet specifying VSANs 2055 through 2 ...

civrTopologyConfigRowStatus

Status of this row.

civrTopologyActivate

Setting this object to 'activate' is a request for the configured IVR topology to be activated on this device. i.e., for the current configuration of IVR topology to be cloned, with the clone becoming the active IVR topology (civrTopologyActiveTable). The ...

civrTopologyActivateTime

The sysUpTime at which the IVR topology was most recently activated. If the IVR topology has not been activated prior to the last re-initialization of the local network management system, then this object will contain a zero value.

civrTopologyCopyActiveToConfig

This object copies the active IVR topology table to configured IVR topology table. If there is no active IVR topology, the copy will result in an error. No action is taken if this object is set to 'noOp'.

civrTopologyClearConfigured

This object clears the configured IVR topology table. No action is taken if this object is set to 'noOp'.

civrTopologyActiveChecksum

The checksum of the active IVR topology.

civrTopologyActiveTable

This table contains the IVR topology. The topology is specified in terms of one or more Autonomous Fabrics made of switches and the VSANs to/from which the switches provide connectivity.

civrTopologyActiveEntry

An entry (conceptual row) in this table.

civrTopologyActiveSwitchWwn

The switch WWN of this device.

civrTopologyActiveAutoFabricId

The Autonomous Fabric id of this device.

civrTopologyActiveSwitchVsan2k

The list of VSANs that are part of IVR topology on this device. Each octet within the value of this object specifies a set of eight VSANs, with the first octet specifying VSANs 0 through 7, the second octet specifying VSANs 8 through 15, etc. Within each ...

civrTopologyActiveSwitchVsan4k

The list of VSANs that are part of IVR topology on this device. Each octet within the value of this object specifies a set of eight VSANs, with the first octet specifying VSANs 2047 through 2054, the second octet specifying VSANs 2055 through 2062, etc. W ...

civrTopologyActive

This object indicates of IVR topology is active or not. If 'true', the IVR topology is active. And if it is 'false', the IVR topology is not active.

civrTopologyAfidConfigChecksum

The checksum of the Autonomous Fabric id (AFID) configurations.

civrTopologyAfidConfTable

This table contains the Autonomous Fabric id (AFID) configurations when automatic VSAN topology discovery is activated. An entry (conceptual row) in this table represents an AFID and its VSANs on a switch.

civrTopologyAfidConfEntry

An entry (conceptual row) in this table.

civrTopologyAfidConfSwitchWwn

The switch WWN of this device.

civrTopologyAfidConfId

The configured Autonomous Fabric id of this device.

civrTopologyAfidConfSwitchVsan2k

The list of VSANs that are part of AFID (Autonomous Fabric ID) specified by civrTopologyConfigAutoFabricId on switch specified by civrTopologyConfigSwitchWwn. Each octet within the value of this object specifies a set of eight VSANs, with the first octet ...

civrTopologyAfidConfSwitchVsan4k

The list of VSANs that are part of AFID (Autonomous Fabric ID) specified by civrTopologyConfigAutoFabricId on switch specified by civrTopologyConfigSwitchWwn. Each octet within the value of this object specifies a set of eight VSANs, with the first octet ...

civrTopologyAfidConfRowStatus

Status of this row.

civrTopologyDefaultAfidChecksum

The checksum of the configured default AFIDs.

civrTopologyDefaultAfidTable

This table contains the default Autonomous Fabric id (AFID) configurations when automatic VSAN topology discovery is activated. An entry (conceptual row) in this table represents the default AFID for a switch.

civrTopologyDefaultAfidEntry

An entry (conceptual row) in this table.

civrTopologyDefaultAfidSwitchWwn

The switch WWN of this device.

civrTopologyDefaultAfidId

The configured Default Autonomous Fabric id of this switch.

civrTopologyDefaultAfidStatus

Status of this row.

civrTopologyIvrSrvGrpTable

This table contains configurations of Inter-VSAN Routing (IVR) Service Group. An Inter VSAN Routing Service Group defines a logical boundary for Inter-VSAN Routing. Inter-VSAN Routing is restricted among VSANs within their own Inter-VSAN Routing Service G ...

civrTopologyIvrSrvGrpEntry

An entry (conceptual row) in this table.

civrTopologyIvrSrvGrpName

This object contains the name of the IVR Service Group corresponding to this conceptual row.

civrTopologyIvrSrvGrpVsan2k

The list of VSANs that are part of this IVR Service Group specified by civrTopologyIvrSrvGrpName. Each octet within the value of this object specifies a set of eight VSANs, with the first octet specifying VSANs 0 through 7, the second octet specifying VSA ...

civrTopologyIvrSrvGrpVsan4k

The list of VSANs that are part of this IVR Service Group specified by civrTopologyIvrSrvGrpName. Each octet within the value of this object specifies a set of eight VSANs, with the first octet specifying VSANs 2048 through 2054, the second octet specifyi ...

civrTopologyIvrSrvGrpRowStatus

Status of this row.

civrTopologyClearAfidConfig

This object clears the AFID configuration table, civrTopologyAfidConfTable, if this object is set to 'clear'. No action is taken if this object is set to 'noOp'.

civrAddIvrVirtualDomainsVsans2k

This object lists VSANs in which the virtual domains in a VSAN are added to the domain list (dmDatabaseTable in CISCO-DM-MIB) in that VSAN. Each octet within the value of this object specifies a set of eight VSANs, with the first octet specifying VSANs 0 ...

civrAddIvrVirtualDomainsVsans4k

This object lists VSANs in which the virtual domains in a VSAN are added to the domain list (dmDatabaseTable in CISCO-DM-MIB) in that VSAN. Each octet within the value of this object specifies a set of eight VSANs, with the first octet specifying VSANs 20 ...

civrEnabledDeviceTable

This table contains the all IVR enabled devices known to the local device on each of the local VSANs. Note that the devices are learned using an internal protocol. So if a device in this table is not reachable, anymore from the local switch, then it is re ...

civrEnabledDeviceEntry

An entry (conceptual row) in this table. Each entry represents a device in a particular VSAN.

civrEnabledDeviceVsan

The VSAN corresponding to this entry.

civrEnabledDeviceAutoFabricId

The Autonomous Fabric id corresponding to this entry.

civrEnabledDeviceDomainId

The domain ID of this device corresponding this entry.

civrEnabledDeviceSwitchWwn

The switch WWN of this device.

civrEnabledDeviceCapability

The switch WWN of this device.

civrZoneMemberFabricId

The fabric address of the IV zone member which is not able to participate in inter-VSAN communication because of conflicting domainIDs.

civDomainIdConflictVsan

The VSAN in which the domainID conflict occurred.

civrZoneSetActDeactPartialSucss

This object indicates if the IV zoneset activation/deactivation was partially success.

civrAfidMisConfigVsan

The VSAN in which the AFID mis-configuration occurred.

civrAfidMisConfigLocalAfid

The local AFID value in which the AFID mis-configuration occurred.

civrAfidMisConfigRemoteAfid

The remote AFID value in which the AFID mis-configuration occurred.

civrAfidMisConfigLocalSWwn

The local switch WWN in which the AFID mis-configuration occurred.

civrAfidMisConfigRemoteSWwn

The remote switch WWN in which the AFID mis-configuration occurred.

civrTopologyMisConfigReason

The reason for a topology mis-configuration.

civrZoneConfigurationGroup

A collection of objects for displaying and configuring IvrZone Membership.

civrTopologyGroup

A collection of objects for IVR topology.

civrStatsGroup

A collection of objects for IVR status/statistics.

civrVirtualDomainsGroup

A collection of objects for IVR status/statistics.

civrGenericGroup

A collection of objects for IVR generic configurations.

civrTopologyGroupRev2

A collection of objects for IVR topology.

civrZoneConfigurationGroupRev2

A collection of objects to support SCSI read only, Qos and Lun zoning in IVR Zone Membership configurations.