CISCO-PNNI-MIB Download

ciscoPnniBackgroundRoutes

Specifies whether background route computation is enabled on this switching system. In this mode, multiple background trees are precomputed for several service categories and QoS metrics. If no route is found in the background trees that satisfies the Q ...

ciscoPnniBackgroundPollInterval

Specifies how often the switching system polls for a significant change that triggers new computation of the background routes. Increasing the value of this object causes the switching system to throttle background route computation.

ciscoPnniBackgroundInsignificantThreshold

Specifies the number of insignificant changes necessary to trigger a new computation of the background routes.

ciscoPnniResourceMgmtPollInterval

Specifies how often PNNI polls resource management to update the values of local interface metrics and attributes. The value of this object impacts the number of new instances of PTSEs originated by this switching system. A larger interval reduces the nu ...

ciscoPnniAdminWeightMode

Specifies the mode of default administrative weight assignment for PNNI interfaces. When this value is set to `uniform', by default the administrative weight of each PNNI interface is set to 5040, as defined in the ATM Forum PNNI 1.0 Specification. When ...

ciscoPnniMaxAdminWeightPercentage

Specifies the maximum acceptable administrative weight for alternate routes as a percentage factor of the least administrative weight of any route to the destination. The constraint on administrative weight only takes effect when background route computat ...

ciscoPnniRouteOptimizationThreshold

Specifies the percentage reduction in the administrative weight of the existing path required to trigger route optimization. When route optimization is enabled and the threshold is exceeded, the existing path is partially torn down and a new path is est ...

ciscoPnniNodeTable

A table of cisco specific attributes that affect the operation of a PNNI logical node.

ciscoPnniNodeEntry

An entry in the table, containing cisco specific information about a node in this switching system.

ciscoPnniNodeAutoSummary

Specifies whether automatic generation of internal summary address(es) based on the switch address(es) or node ID is enabled. Automatically generated summary addresses can only be removed by setting this object to `false'. They cannot be removed through ...

ciscoPnniNodeRedistributeStatic

Specifies whether redistribution of ATM static routes to the PNNI routing domain is enabled. Exterior static routes are advertised in exterior reachable address PTSEs. Internal static routes are advertised in internal reachable address PTSEs.

ciscoPnniNodePtseRequest

Specifies the maximum number of PTSEs that can be requested in one PTSE request packet.

ciscoPnniNodeName

Specifies the textual name of the PNNI node. The node name is distributed to all other nodes via PNNI flooding, using a cisco specific encoding in the System Capabilities information group. This allows all cisco PNNI nodes to use this node name to ident ...

ciscoPnniNodeScopeMappingMode

Specifies the configuration mode of the mapping from organizational scope values (used at UNI interfaces) to PNNI scope (i.e., in terms of PNNI routing level indicators). In `automatic' mode, for each organizational scope value the corresponding PNNI leve ...

ciscoPnniIfTable

A table of cisco specific attributes used to configure a physical interface or subinterface on a switching system which is capable of being used for PNNI routing. Interfaces may represent physical connection points (i.e. copper/fiber connection points) or ...

ciscoPnniIfEntry

An entry in the table, containing cisco specific PNNI information about an interface in this switching system.

ciscoPnniIfLinkSelection

For CBR or VBR call setups, specifies a method for selecting one link out of multiple links with sufficient resources to the same neighbor node. Link selection applies whenever the port specified in the Designated Transit List (DTL) is zero and there are ...

ciscoPnniIfRouteOptimization

To enable or disable the route optimization (automatic rerouting) feature on an ATM interface. To disable route optimization on the interface, set this object to 'disable'. To enable route optimization only for ATM soft PVCs on the interface, set this obj ...

ciscoPnniIfRouteOptimInterval

Specifies how often route optimization takes place on this interface. This object applies only when the object ciscoPnniIfRouteOptimization is NOT set to 'disable'.

ciscoPnniIfRouteOptimStartHour

Specifies the start hour of Time-of-Day route optimization on an ATM interface. This object applies only when the object ciscoPnniIfRouteOptimization is NOT set to 'disable'.

ciscoPnniIfRouteOptimStartMinute

Specifies the start minute of Time-of-Day route optimization on an ATM interface. This object applies only when the object ciscoPnniIfRouteOptimization is NOT set to 'disable'.

ciscoPnniIfRouteOptimEndHour

Specifies the end hour of Time-Of-Day route optimization on an ATM interface. This object applies only when the object ciscoPnniIfRouteOptimization is NOT set to 'disable'.

ciscoPnniIfRouteOptimEndMinute

Specifies the end minute of Time-Of-Day route optimization on an ATM interface. This object applies only when the object ciscoPnniIfRouteOptimization is NOT set to 'disable'.

ciscoPnniPrecedenceTable

A table that specifies the precedence of different types of reachable addresses.

ciscoPnniPrecedenceEntry

An entry in the table, containing information about the precedence of a specific reachable address type. One row is created by the managed system for each reachable address type.

ciscoPnniPrecedenceAddressType

The reachable address type for which the precedence is specified.

ciscoPnniPrecedenceValue

Specifies the precedence of a reachable address type. When there are multiple reachable address types associated with the longest match reachable address prefix, the route selection algorithm first attempts to find routes to reachable address types of gre ...

ciscoPnniRouteAddrTable

A table of cisco specific attributes used to configure cisco specific properties of ATM static routes.

ciscoPnniRouteAddrEntry

An entry in the table, containing cisco specific PNNI information about a reachable address prefix.

ciscoPnniRouteAddrForwardingE164Address

The native E.164 address used as the called party address when the call matching pnniRouteAddrAddress is forwarded across the interface identified by pnniRouteAddrIfIndex. If this address is specified, the received called party address is passed on as the ...

ciscoPnniBasicGroup

A collection of cisco specific MIB objects used for management of PNNI routing.

ciscoPnniRouteOptimizationGroup

A collection of cisco specific MIB objects used for management of route optimization.