CISCO-TELEPRESENCE-EXCHANGE-SYSTEM-MIB

CISCO-TELEPRESENCE-EXCHANGE-SYSTEM-MIB Download

MIBs list

The main purpose of this MIB is to provide product component level configuration, status, statistics, events, and alarm notifications for the Cisco TelePresence Exchange System (CTX System).

IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for CISCO-TELEPRESENCE-EXCHANGE-SYSTEM-MIB

ctxServiceProviderTable
This table specifies the configuration information for service providers as they are configured in the CTX System. Service provider entries provide a logical grouping of regions, organizations, and resources.
ctxServiceProviderEntry
Each entry describes a service provider entry as configured in the CTX System.
ctxServiceProviderIndex
Service provider snmp instance configuration index.
ctxServiceProviderKey
This object specifies the service provider ID key.
ctxServiceProviderName
This object specifies the service provider name as configured in the CTX System.
ctxServiceProviderDescr
This object specifies the service provider description as configured in the CTX System.
ctxServiceProviderHDNumber
This object specifies the service provider help desk number. This number is normally in the e.164 format.
ctxRegionTable
This table specifies the configuration information for regions as they are configured in the CTX System. A region is defined as a set of 'like' resources in terms of network latency, jitter, quality of service, etc. Normally a region is a geographic area ...
ctxRegionEntry
Each entry describes a region entry as configured in the CTX System.
ctxRegionIndex
Region snmp instance configuration index.
ctxRegionKey
This object specifies the region entry ID key as generated by the CTX System when the entry entry was configured.
ctxRegionName
This object specifies the region name as configured in the CTX System.
ctxRegionDescr
This object specifies the region description as configured in the CTX System.
ctxRegionServiceProviderKeyRef1
This object references the ctxServiceProviderKey object from the ctxServiceProviderEntry table. This key matches the service provider key. This key provides an association reference to the service provider entry that is associated to this region entry. ...
ctxOrganizationTable
This table specifies the configuration information for an organization as they are configured in the CTX System. Organization entries provide a logical grouping of customer endpoints and resources.
ctxOrganizationEntry
Each entry represents an organization configuration entry as configured in the CTX system.
ctxOrganizationIndex
Organization snmp instance configuration index.
ctxOrganizationKey
This object specifies the organization ID key as generated by the CTX System when the organization entry was configured.
ctxOrganizationName
This object specifies the organization name as configured in the CTX System.
ctxOrganizationDescr
This object specifies the organization description as configured in the CTX System.
ctxOrganizationMaxPorts
This object specifies the organization maximum ports for scheduled meetings. The value of 0 indicates undefined.
ctxOrganizationDirectDial
This object specifies the organization direct dial enabled flag as configured in the CTX System. If direct dial calls are allowed, this value will be TRUE. If direct dial calls are not allowed, this value will be FALSE.
ctxOrganizationServiceProviderKeyRef1
This object references the ctxServiceProviderKey object from the ctxServiceProviderEntry table. This key matches the service provider key. This key provides an association reference to the service provider entry that is associated to this region entry. ...
ctxResourceTable
This table specifies the configuration information for resources as they are configured in the CTX System. A resource is server or network device that the CTX System includes in configuration to provide call signaling, media services, scheduling, or other ...
ctxResourceEntry
Each entry represents a resource configuration entry as configured in the CTX system.
ctxResourceIndex
Resource snmp instance configuration index.
ctxResourceKey
This object specifies the resource ID key as generated by the CTX System when the resource entry was configured. This key is a globally unique across all configuration tables and entries. This key will persist upon restart and reboot.
ctxResourceName
This object specifies the resource name as configured in the CTX System.
ctxResourceDescr
This object specifies the resource configuration as configured in the CTX System.
ctxResourceMgmtIPType
This object specifies the management IP address type for the resource as configured in the CTX System.
ctxResourceMgmtIPAddr
This object specifies the management IP for the resource as configured in the CTX System. This IP address is used for provisioning, monitoring, and resource probes. The IP address 0.0.0.0 will be used if the resource does not have a management IP address ...
ctxResourceDeviceType
This object specifies the resource device type as configured in the CTX System.
ctxResourceRegionKeyRef1
This object references the ctxRegionKey object from the ctxRegionEntry table. This key matches the region key. This key provides an association reference to the region entry that is associated to this resource entry. This object maybe null or empty if n ...
ctxSipConfigTable
This table specifies the SIP configuration attributes for a resource. Only resources that have SIP attributes will have an entry in this table.
ctxSipConfigEntry
Each entry describes the SIP attributes for a resource as configured in the CTX System. As described in ctxResourceTable description, this table is indexed by the ctxResourceIndex. Only entries that have SIP attributes will have an entry in this table.
ctxSipIpType
This object specifies the SIP IP address type for the resource as configured in the CTX System.
ctxSipIpAddr
This object specifies the SIP signaling IP for the resource as configured in the CTX System. This IP address is used for signaling and for SIP OPTION PING resource probes.
ctxSipPort
This object specifies the SIP port for the resource as configured in the CTX System.
ctxSipTransportProto
This object specifies the SIP transport protocol type as configured in the CTX System.
ctxMediaCapacityConfigTable
This table specifies the media capacity configuration attributes for a resource. Only resources that have media capacity attributes will have an entry in this table.
ctxMediaCapacityConfigEntry
Each entry describes the media capacity attributes for a resource as configured in the CTX System. As described in ctxResourceTable description, this table is indexed by the ctxResourceIndex. Only entries that have media capacity attributes will have an ...
ctxMediaCapacityMaxPorts
This object specifies the maximum port capacity for the resource as configured in the CTX System.
ctxMediaCapacityLargeMeeting
This object specifies the large meeting reservation allowed option for the resource as configured in the CTX System.
ctxMeetingConfigTable
This table specifies the meeting configuration attributes for a resource. Only resources that have meeting attributes will have an entry in this table.
ctxMeetingConfigEntry
Each entry describes the meeting attributes for a resource as configured in the CTX System. As described in ctxResourceTable description, this table is indexed by the ctxResourceIndex. Only entries that have meeting attributes will have an entry in this ...
ctxMeetingConfigStaticMinId
This object specifies the vendor specific minimum static meeting ID as configured in the CTX System.
ctxMeetingConfigStaticMaxId
This object specifies the vendor specific maximum static meeting ID as configured in the CTX System.
ctxMeetingConfigInterOpMinId
This object specifies the vendor specific minimum interOp meeting ID as configured in the CTX System.
ctxMeetingConfigInterOpMaxId
This object specifies the vendor specific maximum interOp meeting ID as configured in the CTX System.
ctxClusterNodeTable
This table specifies the configuration information for cluster nodes as they are configured in the CTX System. A cluster node is a server within the CTX System, such as admin server, call engine server, or database server.
ctxClusterNodeEntry
Each entry describes a cluster node entry as configured in the CTX System.
ctxClusterNodeIndex
Cluster node snmp instance configuration index.
ctxClusterNodeKey
This object specifies the cluster node ID key as generated by the CTX System when the cluster node entry was configured.
ctxClusterNodeName
This object specifies the cluster node name as configured in the CTX system.
ctxClusterNodeHostName
This object specifies the cluster node hostname as configured in the CTX System.
ctxClusterNodeIPType
This object specifies the cluster node IP address type as configured in the CTX System.
ctxClusterNodeIPAddr
This object specifies the cluster node IP address as configured in the CTX System.
ctxClusterNodeClusterName
This object specifies the cluster node cluster name as configured in the CTX System.
ctxClusterNodeType
This object specifies the cluster node type as configured in the CTX System.
ctxClusterNodeOperState
This object specifies the operational state of the cluster node. The operational state is set by the CTX System based on configuration and proactive monitoring of the cluster node. See the textual convention CtxResourceOperState for a detail description o ...
ctxAdminServersStatus
This object specifies an overall system health status state for the cluster admin server nodes. This state is an indicator of the CTX System functional health in terms of the admin functions. The ctxAdminServersStatusChg notification provides real-time al ...
ctxCallEnginesStatus
This object specifies an overall system health status state for the cluster engine server nodes. This state is an indicator of the CTX System functional health in terms of the call processing engine functions. The ctxCallEnginesStatusChg notification prov ...
ctxDatabaseServersStatus
This object specifies an overall system health status state for the cluster database server nodes. This state is an indicator of the CTX System functional health in terms of the database server functions. The ctxDatabaseServersStatusChg notification provi ...
ctxResourceStatus
This object specifies an overall system health status state for the resources configured. This state is an indicator of the CTX System functional health in terms of the resource dependencies. The ctxResourceStatusChg notification provides real-time alerts ...
ctxSystemConfigStatus
This object specifies an overall system health status state for the system configuration. This state is an indicator of the CTX System functional health in terms of the overall configuration. The ctxSystemConfigStatusChg notification provides real-time al ...
ctxSystemBackupStatus
This object specifies an overall system health status state for the system backups. This state is an indicator of the CTX System functional health in terms of the overall system backups. The ctxBackupStatusChg notification provides real-time alerts for wh ...
ctxResourceStatsTable
This table specifies the run-time resource statistics.
ctxResourceStatsEntry
Each entry describes an individual resource and statistics for it. This table is indexed by the ctxResourceIndex. All resources will have an entry in this table to define common resource statistics, such as operational state.
ctxResourceOperState
This object specifies the operational state of the resource. The operational state is set by the CTX System based on configuration and proactive monitoring of the resource. See the textual convention CtxResourceOperState for a detail description of the va ...
ctxResourceUnavailTrans
This object specifies a counter that increments when the resource transitions to unreachable or failed state from another state. The management entity can use this to track the operational stability of the resource.
ctxResourceUnavailDuration
Defines the total time in seconds that the resource was in either the failed or unreachable states. This counter keeps track of time in seconds on how much the resource stays in the failed and unreachable states. The duration is accumulative from SNMP sta ...
ctxResourceCallSetupFailures
This object specifies a counter that increments every time a call fails to be setup correctly to this resource. Miss-dialed numbers are excluded and not considered a failure.
ctxAllocStatsTable
This table specifies the run-time scheduling port allocation statistics.
ctxAllocStatsEntry
Each entry describes an individual resource and statistics for media port allocations. This table is indexed by the ctxResourceIndex. Only resources that require port allocations will have an entry in this table.
ctxAllocActivePorts
This object identifies the active in-use ports for the resource.
ctxAllocAvailPorts
This object identifies the available ports for the resource.
ctxAllocFailures
This object increments when there are not enough port resources available to process the requested allocation or if there is an error allocating the ports.
ctxAllocOutOfPorts
This object increments when there are not enough port resources available to process the requested allocation.
ctxRegionStatsTable
This table specifies the run-time statistics for regions for scheduling port allocations and call setup failures. This table is similar to the ctxAllocStatsTable table, except this table provides statistics per region for all resources.
ctxRegionStatsEntry
Each entry describes statistics for a region. This table is indexed by the ctxRegionIndex.
ctxRegionCallSetupFailures
This object specifies a counter that increments every time a call fails to be setup correctly in this region. Mis-dialed numbers are excluded and not considered a failure.
ctxAllocPoolActivePorts
This object identifies the active in-use ports for the region.
ctxAllocPoolAvailPorts
This object identifies the available ports for resources within the region.
ctxAllocPoolAllocFailures
This object increments when there are not enough port resources available to process the requested allocation or if there is an error allocating the port for the given region.
ctxAllocPoolAllocOutOfPorts
This object increments when there are not enough port resources available to process the requested allocation for the given region resource pool.
ctxPeakHistMaxIntervals
This object specifies the number of time intervals kept in the history tables ctxPeakHistAllocTable and ctxPeakHistAllocPoolTable. The default is 96 intervals. 96 intervals at the ctxPeakHistIntTime default of 15 minutes stores peak values for 24 hours. ...
ctxPeakHistIntTime
This object specifies the time interval in minutes. Default is 15 minutes. The minimum interval time is 1 and the maximum is 1440 minutes. Changing this value will reset and clear both ctxPeakHistAllocTable and ctxPeakHistAllocPoolTable table entries.
ctxPeakHistAllocTable
This table specifies the run-time peak statistics for resource port allocations. This table contains peak port allocations per resource for ctxHistMaxIntervals. The management entity can use this table to monitor the peak port allocations per interval. Se ...
ctxPeakHistAllocEntry
Each entry describes a single peak time interval per resource. This table is indexed by the ctxResourceIndex and ctxPeakHistAllocIntIndex. Only resources that have port allocations will have an entry in this table.
ctxPeakHistAllocIntIndex
A monotonically increasing integer which is incremented for every interval. Based on the allowed interval length the object will not wrap for life of Device. The intent of this object is to allow network management applications a mechanism that allows the ...
ctxPeakHistAllocTS
This object specifies the start timestamp of the interval. The interval end time is this time plus the ctxPeakHistIntTime.
ctxPeakHistAllocPorts
This object specifies the peak ports for the given interval. This is the maximum port count during the interval time period.
ctxPeakHistAllocPoolTable
This table specifies the run-time peak port allocation statistics for all resources within a region. This table contains peak port allocations per region for ctxHistMaxIntervals. The management entity can use this table to monitor the peak port allocation ...
ctxPeakHistAllocPoolEntry
Each entry describes a single peak time interval per region. This table is indexed by the ctxRegionIndex and ctxPeakHistAllocPoolIntIndex.
ctxPeakHistAllocPoolIntIndex
A monotonically increasing integer which is incremented for every interval. Based on the allowed interval length the object will not wrap for life of Device. The intent of this object is to allow network management applications a mechanism that allows the ...
ctxPeakHistAllocPoolTS
This object specifies the start timestamp of the interval. The interval end time is this time plus the ctxPeakHistIntTime.
ctxPeakHistAllocPoolPorts
This object specifies the peak ports for the given interval. This is the maximum port count during the interval time period.
ctxErrorHistoryTableSize
This object specifies the number of entries that the ctxErrorHistoryTable can contain. When the capacity of the ctxErrorHistoryTable is reached, the oldest entry in the table will be deleted in order to accommodate the new entry. A value of '0' disables ...
ctxErrorHistoryMaxSeverity
Defines the maximum severity of the event messages that the history table will contain. The default is notice(5), which can be changed by setting the object.
ctxErrorHistoryLastIndex
This object specifies the value of the ctxErrorIndex object corresponding to the last entry added into the table. The management entity can use this object to determine if a new entry has been added into the ctxErrorHistoryTable.
ctxErrorHistoryTable
This table contains a history of alarms and events generated by the CTX system. This table is a real-time history table of alarms and events for the CTX System. When the table reaches its capacity specified in ctxErrorHistoryTableSize, the agent will purg ...
ctxErrorHistoryEntry
An entry is an event that was generated by the CTX System. Events can be traps that were sent and other log messages.
ctxErrorIndex
Error history snmp instance index.
ctxErrorKey
This object specifies the error history key id. A empty string maybe used if the key is not present.
ctxErrorTimeStamp
This object indicates the timestamp when the message or the notification is generated by the CTX system. The timestamp is UTC.
ctxErrorSeverity
This object specifies the severity for the given message.
ctxErrorAppName
This object specifies the application name for the message. AppNames are documented in the CTX System user guide.
ctxErrorAlarmId
This object specifies the alarm ID for the event as generated by the CTX System. Alarm ID's are documented in the CTX System user guide.
ctxErrorAttrValStr
This object specifies an attribute value pair in the format of attr=value [attr=value ...]. This string is limited to 255 characters. If the attribute value string is larger than 255 characters, the string will be truncated to 254 characters and an '*' ...
ctxErrorMessage
This object specifies the message text for the event. This string is limited to 255 characters. If the message string is larger than 255 characters, the string will be truncated to 254 characters and an '*' will be inserted as the 255th character as a wa ...
ctxNotifyMessage
This object specifies a message text for the notification that is sent. This message will indicate a short description detailing the cause for the trap. This is intended as value added information for operational support staff, such as value added infor ...
ctxStatusChangeNotifyEnable
This object specifies if the status change traps should be enabled or disabled. Setting this to TRUE will enable the notifications. Setting this to FALSE will disable the notifications. Default is true/enabled. This object controls the generation of the ...
ctxLicenseAlarmNotifyEnable
This object specifies if the license alarm traps should be enabled or disabled. Setting this to TRUE will enable the notifications. Setting this to FALSE will disable the notifications. Default is true/enabled. This object controls the generation of the ...
ctxAuthFailureNotifyEnable
This object specifies if the authentication failure traps should be enabled or disabled. Setting this to TRUE will enable the notifications. Setting this to FALSE will disable the notifications. The default setting for authentication failures is FALSE/di ...
ctxClusterNodeAlarmNotifyEnable
This object specifies if the cluster node alarm traps should be enabled or disabled. Setting this to TRUE will enable the notifications. Setting this to FALSE will disable the notifications. Default is true/enabled. This object controls the generation of ...
ctxResourceAlarmNotifyEnable
This object specifies if the resource alarm traps should be enabled or disabled. Setting this to TRUE will enable the notifications. Setting this to FALSE will disable the notifications. Default is true/enabled. This object controls the generation of the ...
ctxCallFailureNotifyEnable
This object specifies if the call failure traps should be enabled or disabled. Setting this to TRUE will enable the notifications. Setting this to FALSE will disable the notifications. Default is true/enabled. This object controls the generation of the f ...
ctxErrorHistoryEventNotifyEnable
This object specifies if the error event history traps should be enabled or disabled. Setting this to TRUE will enable the notifications. Setting this to FALSE will disable the notifications. Notifications and other error logs are logged in the error his ...
ciscoTelepresenceExchangeSystemMIBStatusGroup
CTX System status object group.
ciscoTelepresenceExchangeSystemMIBConfigGroup
CTX System configuration object group.
ciscoTelePresenceExchangeSystemMIBStatsGroup
Statistics object group.
ciscoTelepresenceExchangeSystemMIBNotfyObjectsGroup
CTX System notify objects.
ciscoTelepresenceExchangeSystemMIBErrorHistoryGroup
CTX System error history table objects.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list