ERPS-MIB Download
The MIB module for managing Ethernet Ring Protection Switching.
IPHost Network Monitor offer an easy way of SNMP monitoring your D-Link Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for ERPS-MIB
- swERPSAdminState
- This object indicates the ERPS state of the bridge.
- swERPSLogState
- This object indicates the ERPS log state of the bridge.
- swERPSTrapState
- This object indicates the ERPS trap state of the bridge.
- swERPSMgmtRAPSVlanTable
- This table contains ERPS ring configuration information.
- swERPSMgmtRAPSVlanEntry
- A list of ERPS ring configuration information.
- swERPSMgmtRAPSVlanId
- The RAPS VLAN is an index of configuration.
- swERPSMgmtRAPSWestPort
- This is one of the RPL owner ports.The RPL owner may block this port. The value 0 indicates the west port is a virtual channel. ::= { swERPSMgmtRAPSVlanEntry 2 } SYNTAX INTEGER { fowarding(1), blocking(2), signal-fail(3) } MAX-ACCESS read-only STATUS c ...
- swERPSMgmtRAPSProtectionVlan
- The protection VLAN has prevented a loop.
- swERPSMgmtRAPSRingMEL
- The ring MEL is the maintenance entity group (MEG) level providing a communication channel for ring automatic protection switching (RAPS) information.
- swERPSMgmtRAPSHoldOffTime
- In order to coordinate timing of protection switches at multiple layers.
- swERPSMgmtRAPSGuardTime
- This is used to prevent ring nodes from receiving outdated RAPS messages.
- swERPSMgmtRAPSWTRTime
- In the revertive mode of operation, to prevent frequent operation of the protection switch due to an intermittent defect, a failed working transport entity must become stable in a fault-free state.
- swERPSMgmtRAPSRingState
- This indicates the state of the ring: begin, init, idle, or protection.
- swERPSMgmtRAPSRingAdminState
- This indicates the administrative state of the ring.
- swERPSMgmtRAPSRPLOwnerOperStatus
- The current operational value of the RPL owner state. The value 'active' is used to indicate that the RPL owner administrative state is enabled and the device is operated as the active RPL owner. The value 'inactive' is used to indicate that the RPL owner ...
- swERPSMgmtRAPSProtectionVlanRangeList1to64
- This object indicates the VLAN range (1-512) that belongs to the protection VLANs.
- swERPSMgmtRAPSProtectionVlanRangeList65to128
- This object indicates the VLAN range (513-1024) that belongs to the protection VLANs.
- swERPSMgmtRAPSProtectionVlanRangeList129to192
- This object indicates the VLAN range (1025-1536) that belongs to the protection VLANs.
- swERPSMgmtRAPSProtectionVlanRangeList193to256
- This object indicates the VLAN range (1537-2048) that belongs to the protection VLANs.
- swERPSMgmtRAPSProtectionVlanRangeList257to320
- This object indicates the VLAN range (2049-2560) that belongs to the protection VLANs.
- swERPSMgmtRAPSProtectionVlanRangeList321to384
- This object indicates the VLAN range (2561-3072) that belongs to the protection VLANs.
- swERPSMgmtRAPSProtectionVlanRangeList385to448
- This object indicates the VLAN range (3073-3584) that belongs to the protection VLANs.
- swERPSMgmtRAPSProtectionVlanRangeList449to512
- This object indicates the VLAN range (3585-4096) that belongs to the protection VLANs.
- swERPSMgmtRAPSRowStatus
- This object indicates the RowStatus of this entry.
- swERPSMgmtSubRingCtrlTable
- This table contains ERPS sub-ring configuration information.
- swERPSMgmtSubRingCtrlEntry
- A list of ERPS sub-ring configuration information.
- swERPSMgmtSubRingCtrlRAPSVlanId
- The RAPS VLAN is an index of configuration.
- swERPSMgmtSubRingCtrlSubRingRAPSVlanId
- This indicates the ring control VLAN-ID of the sub-ring which connects to another ring.
- swERPSMgmtSubRingCtrlTCPropagationState
- This indicates the state of sub-ring topology change propagation.
- swERPSMgmtSubRingCtrlRowStatus
- This object indicates the RowStatus of this entry.
- swERPSNodeId
- This used trap object means the node MAC.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
