HUAWEI-L2VLAN-MIB Download
IPHost Network Monitor offer an easy way of SNMP monitoring your Huawei Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for HUAWEI-L2VLAN-MIB
- hwL2VlanMIBTable
- The table contains basic information for this vlan.
- hwL2VlanMIBEntry
- Entries of VLAN MIB table
- hwL2VlanIndex
- The VLAN-ID or other identifier refering to this VLAN.
- hwL2VlanDescr
- description of the VLAN
- hwL2VlanPortList
- the set of Ports which belong to the VLAN
- hwL2VlanType
- Change the value from '1' to '2' indecates that the super-vlan is canceled; Note that the switch between '1' and '3' or between '2' and '3' are forbidden .
- hwL2VlanBcastUnknownUni
- enabled(1) indecates broadcast the packets,disable(2) indecates it's closed .
- hwL2VlanIfIndex
- the value of the node is InterfaceIndex, else the value is -1.
- hwL2VlanMacLearn
- Just the common vlan and Sub-vlan have the attribute .Default value is enabled(1).
- hwL2VlanMulticast
- The value enabled(1) indecates vlan Multicasting is allowed;disable(2) indecates it's closed . The default value is disable(2).
- hwL2VlanAdminStatus
- value disable(2) indecates shutdown the vlan ; enabled£¨1£©indecates open the vlan.
- hwL2VlanStatisStatus
- default value is disable(2).
- hwL2VlanCreateStatus
- static configured by management or created dynamicly by GVRP.
- hwL2VlanRowStatus
- Operation status
- hwL2VlanStackingTable
- QinQ-port configuration table
- hwL2VlanStackingEntry
- QinQ-port configuration table
- hwL2VlanStackingPortIndex
- Index number of QinQ-port
- hwL2VlanStackingInsideVlanId
- InsideVlanId of QinQ-port ,use it as the Index.
- hwL2VlanStackingOutsideVlanListLow
- The possible value of the outside vlan list
- hwL2VlanStackingOutsideVlanListHigh
- The possible value of the outside vlan list
- hwL2VlanStackingRowStatus
- this table can be created
- hwL2VlanMappingTable
- configuration table
- hwL2VlanMappingEntry
- QinQ-port configuration table
- hwL2VlanMappingPortIndex
- Index number of QinQ-port
- hwL2VlanMappingInsideVlanId
- InsideVlanId of QinQ-port ,use it as the Index.
- hwL2VlanMappingOutsideVlanListLow
- The possible value of the outside vlan list
- hwL2VlanMappingOutsideVlanListHigh
- The possible value of the outside vlan list
- hwL2VlanMappingRowStatus
- this table can be created
- hwSuperVlanTable
- The table contains configuration and control information for the super vlan.
- hwSuperVlanEntry
- Entries of the super vlan table.
- hwSuperVlanId
- The super vlan id.
- hwSubVlanListLow
- The lowest possible value of the sub vlan list on the supervlan
- hwSubVlanListHigh
- The highest possible value of the sub vlan list on the supervlan
- hwL2InterfIsolateTable
- The table contains configuration and control information for interfaces isolate.
- hwL2InterfIsolateEntry
- Secondary vlan lists of Isolate-VLANs
- hwL2InterfIsolateVlanId
- VLAN ID. The vlan into which interf-isolate is configured.
- hwL2InterfIsolateInterflistLow
- The lowest possible value of Interface list on the vlan
- hwL2InterfIsolateInterflistHigh
- The highest possible value of Interface list on the vlan
- hwL2IsolatemappingTable
- The table contains mapping information between isolated ports.
- hwL2IsolatemappingEntry
- hwL2IsolatemappingPortNum
- Port number .
- hwL2IsolateInterflistLow
- The lowest possible value of Interface list .
- hwL2IsolateInterflistHigh
- The highest possible value of Interface .
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
