Nortel-Magellan-Passport-AtmBearerServiceMIB

Nortel-Magellan-Passport-AtmBearerServiceMIB Download

MIBs list

The module describing the Nortel Magellan Passport AtmBearerService Enterprise MIB

IPHost Network Monitor offer an easy way of SNMP monitoring your Nortel network devices, Firewalls, Repeaters.

OID list for Nortel-Magellan-Passport-AtmBearerServiceMIB

atmIfVpcNrpRowStatusTable
This entry controls the addition and deletion of atmIfVpcNrp components.
atmIfVpcNrpRowStatusEntry
A single entry in the table represents a single atmIfVpcNrp component.
atmIfVpcNrpRowStatus
This variable is used as the basis for SNMP naming of atmIfVpcNrp components. These components can be added and deleted.
atmIfVpcNrpComponentName
This variable provides the component's string name for use with the ASCII Console Interface
atmIfVpcNrpStorageType
This variable represents the storage type value for the atmIfVpcNrp tables.
atmIfVpcNrpIndex
This variable represents the index for the atmIfVpcNrp tables.
atmIfVpcNrpProvTable
This group contains the provisionable attributes for the Nrp component.
atmIfVpcNrpProvEntry
An entry in the atmIfVpcNrpProvTable.
atmIfVpcNrpNextHop
This attribute specifies the Nrp component with which this Nrp is associated. A sample value is AtmIf/31 Vcc/0.32 Nrp.
atmIfVpcNrpConnectionPointType
This attribute specifies the connection point type desired for a Nrp component. The actual connection point type value is visible in the parent component's connectionPointType attribute. The desired connection point type can be specified directly as a seg ...
atmIfVpcNrpOamSegmentBoundary
This attribute specifies the OAM segment boundary desired for a Nrp component. It affects the connection point type value visible in the parent component's connectionPointType attribute. The desired OAM segment boundary can be specified directly as yes, n ...
atmIfVpcNrpTxAal5PartialPacketDiscard
This attribute is obsolete in P4.2 and has been migrated under Vcd (Vpd) component. This attribute specifies whether the AAL5 Partial Packet Discard (PPD) feature has been enabled or disabled on the Nrp in the transmit direction. This feature allows the N ...
atmIfVpcNrpRxAal5PartialPacketDiscard
This attribute is obsolete in P4.2 and has been migrated under Vcd (Vpd) component. This attribute specifies whether the AAL5 Partial Packet Discard (PPD) feature has been enabled or disabled on the Nrp in the receive direction. This feature allows the NR ...
atmIfVpcNrpBandwidthElastic
This attribute is only of importance for connections which are carried on a link with a variable bandwidth. For example, the bandwidth may be reduced in the event that one or more physical links in the IMA group fail, such that the originally requested ba ...
atmIfVpcNrpOverrideHoldingPriority
This attribute specifies the holding priority of this connection. Holding priority is used when there is an IMA group where some physical links have failed. Holding priority determines the order in which connections are released. 4 is the lowest holding p ...
atmIfVccNrpRowStatusTable
This entry controls the addition and deletion of atmIfVccNrp components.
atmIfVccNrpRowStatusEntry
A single entry in the table represents a single atmIfVccNrp component.
atmIfVccNrpRowStatus
This variable is used as the basis for SNMP naming of atmIfVccNrp components. These components can be added and deleted.
atmIfVccNrpComponentName
This variable provides the component's string name for use with the ASCII Console Interface
atmIfVccNrpStorageType
This variable represents the storage type value for the atmIfVccNrp tables.
atmIfVccNrpIndex
This variable represents the index for the atmIfVccNrp tables.
atmIfVccNrpProvTable
This group contains the provisionable attributes for the Nrp component.
atmIfVccNrpProvEntry
An entry in the atmIfVccNrpProvTable.
atmIfVccNrpNextHop
This attribute specifies the Nrp component with which this Nrp is associated. A sample value is AtmIf/31 Vcc/0.32 Nrp.
atmIfVccNrpConnectionPointType
This attribute specifies the connection point type desired for a Nrp component. The actual connection point type value is visible in the parent component's connectionPointType attribute. The desired connection point type can be specified directly as a seg ...
atmIfVccNrpOamSegmentBoundary
This attribute specifies the OAM segment boundary desired for a Nrp component. It affects the connection point type value visible in the parent component's connectionPointType attribute. The desired OAM segment boundary can be specified directly as yes, n ...
atmIfVccNrpTxAal5PartialPacketDiscard
This attribute is obsolete in P4.2 and has been migrated under Vcd (Vpd) component. This attribute specifies whether the AAL5 Partial Packet Discard (PPD) feature has been enabled or disabled on the Nrp in the transmit direction. This feature allows the N ...
atmIfVccNrpRxAal5PartialPacketDiscard
This attribute is obsolete in P4.2 and has been migrated under Vcd (Vpd) component. This attribute specifies whether the AAL5 Partial Packet Discard (PPD) feature has been enabled or disabled on the Nrp in the receive direction. This feature allows the NR ...
atmIfVccNrpBandwidthElastic
This attribute is only of importance for connections which are carried on a link with a variable bandwidth. For example, the bandwidth may be reduced in the event that one or more physical links in the IMA group fail, such that the originally requested ba ...
atmIfVccNrpOverrideHoldingPriority
This attribute specifies the holding priority of this connection. Holding priority is used when there is an IMA group where some physical links have failed. Holding priority determines the order in which connections are released. 4 is the lowest holding p ...
atmIfVptVccNrpRowStatusTable
This entry controls the addition and deletion of atmIfVptVccNrp components.
atmIfVptVccNrpRowStatusEntry
A single entry in the table represents a single atmIfVptVccNrp component.
atmIfVptVccNrpRowStatus
This variable is used as the basis for SNMP naming of atmIfVptVccNrp components. These components can be added and deleted.
atmIfVptVccNrpComponentName
This variable provides the component's string name for use with the ASCII Console Interface
atmIfVptVccNrpStorageType
This variable represents the storage type value for the atmIfVptVccNrp tables.
atmIfVptVccNrpIndex
This variable represents the index for the atmIfVptVccNrp tables.
atmIfVptVccNrpProvTable
This group contains the provisionable attributes for the Nrp component.
atmIfVptVccNrpProvEntry
An entry in the atmIfVptVccNrpProvTable.
atmIfVptVccNrpNextHop
This attribute specifies the Nrp component with which this Nrp is associated. A sample value is AtmIf/31 Vcc/0.32 Nrp.
atmIfVptVccNrpConnectionPointType
This attribute specifies the connection point type desired for a Nrp component. The actual connection point type value is visible in the parent component's connectionPointType attribute. The desired connection point type can be specified directly as a seg ...
atmIfVptVccNrpOamSegmentBoundary
This attribute specifies the OAM segment boundary desired for a Nrp component. It affects the connection point type value visible in the parent component's connectionPointType attribute. The desired OAM segment boundary can be specified directly as yes, n ...
atmIfVptVccNrpTxAal5PartialPacketDiscard
This attribute is obsolete in P4.2 and has been migrated under Vcd (Vpd) component. This attribute specifies whether the AAL5 Partial Packet Discard (PPD) feature has been enabled or disabled on the Nrp in the transmit direction. This feature allows the N ...
atmIfVptVccNrpRxAal5PartialPacketDiscard
This attribute is obsolete in P4.2 and has been migrated under Vcd (Vpd) component. This attribute specifies whether the AAL5 Partial Packet Discard (PPD) feature has been enabled or disabled on the Nrp in the receive direction. This feature allows the NR ...
atmIfVptVccNrpBandwidthElastic
This attribute is only of importance for connections which are carried on a link with a variable bandwidth. For example, the bandwidth may be reduced in the event that one or more physical links in the IMA group fail, such that the originally requested ba ...
atmIfVptVccNrpOverrideHoldingPriority
This attribute specifies the holding priority of this connection. Holding priority is used when there is an IMA group where some physical links have failed. Holding priority determines the order in which connections are released. 4 is the lowest holding p ...

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list