Nortel-Magellan-Passport-AtmMpeMIB Download

atmMpeRowStatusTable

This entry controls the addition and deletion of atmMpe components.

atmMpeRowStatusEntry

A single entry in the table represents a single atmMpe component.

atmMpeRowStatus

This variable is used as the basis for SNMP naming of atmMpe components. These components can be added and deleted.

atmMpeComponentName

This variable provides the component's string name for use with the ASCII Console Interface

atmMpeStorageType

This variable represents the storage type value for the atmMpe tables.

atmMpeIndex

This variable represents the index for the atmMpe tables.

atmMpeCidDataTable

This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.

atmMpeCidDataEntry

An entry in the atmMpeCidDataTable.

atmMpeCustomerIdentifier

This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level compo ...

atmMpeIfEntryTable

This group contains the provisionable attributes for the ifEntry.

atmMpeIfEntryEntry

An entry in the atmMpeIfEntryTable.

atmMpeIfAdminStatus

The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.

atmMpeIfIndex

This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.

atmMpeProvTable

This group contains the provisioned attributes for the AtmMpe component.

atmMpeProvEntry

An entry in the atmMpeProvTable.

atmMpeMaxTransmissionUnit

This attribute sets the size of the largest datagram which can be sent on the interface. This includes the size of the Logical Link Control header (if applicable) as well as the protocol data unit.

atmMpeEncapType

This attribute specifies the rfc1483 encapsulation type to be used for the AtmConnections under this AtmMpe. Specifying llcEncap allows multiplexing of multiple protocols over the VCCs. The protocol of the carried PDU will be identified by an IEEE 802.2 L ...

atmMpeIlsForwarder

This attribute specifies the IlsForwarder component this AtmMpe component is using.

atmMpeMediaProvTable

This group contains the base provisioning data for the Atm Mpe component.

atmMpeMediaProvEntry

An entry in the atmMpeMediaProvTable.

atmMpeLinkToProtocolPort

This attribute contains a protocol port component name. The attribute associates an AtmMpe application with a protocol port.

atmMpeStateTable

This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses ...

atmMpeStateEntry

An entry in the atmMpeStateTable.

atmMpeAdminState

This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this ...

atmMpeOperationalState

This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that t ...

atmMpeUsageState

This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value b ...

atmMpeOperStatusTable

This group includes the Operational Status attribute. This attribute defines the current operational state of this component.

atmMpeOperStatusEntry

An entry in the atmMpeOperStatusTable.

atmMpeSnmpOperStatus

The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operation ...

atmMpeAcRowStatusTable

This entry controls the addition and deletion of atmMpeAc components.

atmMpeAcRowStatusEntry

A single entry in the table represents a single atmMpeAc component.

atmMpeAcRowStatus

This variable is used as the basis for SNMP naming of atmMpeAc components. These components can be added and deleted.

atmMpeAcComponentName

This variable provides the component's string name for use with the ASCII Console Interface

atmMpeAcStorageType

This variable represents the storage type value for the atmMpeAc tables.

atmMpeAcIndex

This variable represents the index for the atmMpeAc tables.

atmMpeAcProvTable

This group contains the provisioned attributes for the AtmConnection component.

atmMpeAcProvEntry

An entry in the atmMpeAcProvTable.

atmMpeAcAtmConnection

This attribute specifies the Atm nailed up endpoint, AtmIf/n Vcc/ vpi.vci Nep, that this connection is associated with.

atmMpeAcIpCoS

This attribute specifies the Class of Service (CoS) given to each packet received on an ATM connection. The initial CoS given to a packet may be overridden when the cosPolicyAssignment attribute is defined on either the IpPort component of the ProtocolPor ...

atmMpeAcStateTable

This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses ...

atmMpeAcStateEntry

An entry in the atmMpeAcStateTable.

atmMpeAcAdminState

This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this ...

atmMpeAcOperationalState

This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that t ...

atmMpeAcUsageState

This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value b ...

atmMpeAcOperTable

This group contains the operational attributes for the AtmConnection component.

atmMpeAcOperEntry

An entry in the atmMpeAcOperTable.

atmMpeAcSpeed

This attribute indicates the approximate bit rate for the connection. The bit rate is determined from the cell rate provisioned for the Vcc linked to this connection. The cell rate is multiplied by 53 bytes per cell and 8 bits per byte to obtain the bit r ...

atmMpeAcStatsTable

This group contains the frame based statistics maintained for the AtmConnection component. For cell based statistics, see the Vcc component.

atmMpeAcStatsEntry

An entry in the atmMpeAcStatsTable.

atmMpeAcOutPackets

This attribute counts the total number of packets sent on this connection. This counter will wrap around to 0 when it exceeds its maximum count.

atmMpeAcOutOctets

This attribute counts the total number of octets sent on this connection. This counter will wrap around to 0 when it exceeds its maximum count. DESCRIPTION

atmMpeAcOutDiscards

This attribute counts the total number of packets which were supposed to be sent on this connection but were discarded due to congestion or the connection being down. This counter will wrap around to 0 when it exceeds its maximum count. DESCRIPTION

atmMpeAcInPackets

This attribute counts the total number of packets received on this connection. This counter will wrap around to 0 when it exceeds its maximum count. DESCRIPTION

atmMpeAcInOctets

The attribute counts the total number of octets received on this connection. This counter will wrap around to 0 when it exceeds its maximum count. DESCRIPTION

atmMpeAcInUnknownProtos

This attribute counts the total number of packets received on this connection which were discarded because they contained an unknown or unsupported protocol (includes packets received for protocols not currently bound to the associated ProtocolPort compon ...

atmMpeAcInErrors

This attribute counts the total number of packets received on the connection which contained errors preventing them from being delivered to a higher-layer protocol (includes short frames). This counter will wrap around to 0 when it exceeds its maximum cou ...