Nortel-Magellan-Passport-IpxMIB Download

vrPpIpxPRowStatusTable

This entry controls the addition and deletion of vrPpIpxP components.

vrPpIpxPRowStatusEntry

A single entry in the table represents a single vrPpIpxP component.

vrPpIpxPRowStatus

This variable is used as the basis for SNMP naming of vrPpIpxP components. These components can be added and deleted.

vrPpIpxPComponentName

This variable provides the component's string name for use with the ASCII Console Interface

vrPpIpxPStorageType

This variable represents the storage type value for the vrPpIpxP tables.

vrPpIpxPIndex

This variable represents the index for the vrPpIpxP tables.

vrPpIpxPAdminControlTable

This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component.

vrPpIpxPAdminControlEntry

An entry in the vrPpIpxPAdminControlTable.

vrPpIpxPSnmpAdminStatus

The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no o ...

vrPpIpxPProvTable

The Provisionable group for the IpxPort component.

vrPpIpxPProvEntry

An entry in the vrPpIpxPProvTable.

vrPpIpxPNetworkNumberProv

The Ipx network number of the network directly connected to this port.

vrPpIpxPDefaultType

This attribute indicates which protocol is to run on a protocol port. In the case of a lan media it is to be set to broadcast. In the case of WAN media the following choices are to be exercised: For running Pre-IPXWAN RIP set value to other. For running n ...

vrPpIpxPBroadcastInhibit

If this attribute is set, all outgoing periodic and triggered updates for RIP and SAP will be inhibited for the port. However the port will still accept incoming RIP and SAP packets on the port. This may be useful for ports with only a bank of servers on ...

vrPpIpxPSresProvTable

This group contains the provisioned attributes for SourceRouteEndStation support.

vrPpIpxPSresProvEntry

An entry in the vrPpIpxPSresProvTable.

vrPpIpxPSourceRouteEndStationSupport

This attribute is used to enable or disable support for SourceRouteEndStation (Sres). If set to enable, Sres will be supported on this protocol on this ProtocolPort (Pp). If set to disable, it will not be supported. An Sres component must be provisioned u ...

vrPpIpxPStateTable

This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses ...

vrPpIpxPStateEntry

An entry in the vrPpIpxPStateTable.

vrPpIpxPAdminState

This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this ...

vrPpIpxPOperationalState

This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that t ...

vrPpIpxPUsageState

This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value b ...

vrPpIpxPOperStatusTable

This group includes the Operational Status attribute. This attribute defines the current operational state of this component.

vrPpIpxPOperStatusEntry

An entry in the vrPpIpxPOperStatusTable.

vrPpIpxPSnmpOperStatus

The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operation ...

vrPpIpxPOperTable

The IpxPort Operational Attributes.

vrPpIpxPOperEntry

An entry in the vrPpIpxPOperTable.

vrPpIpxPType

The type of the circuit. This would differ from the provisioned type when a different routing protocol is negotiated with the peer.

vrPpIpxPEncapsulation

Packet encapsulation type that the router has determined to use on the port. There are seven encapsulation types used to identify IPX datagram as listed below. 1. link: IPX encapsulation type for PPP, ATM MPE, and X25DTE media types. 2. ethernet: IPX enca ...

vrPpIpxPNetworkNumber

The Ipx network number from the provisioned networkNumberProv value.

vrPpIpxPNode

The Ipx node address of this IpxPort.

vrPpIpxPStatsTable

The IpxPort Statistics group.

vrPpIpxPStatsEntry

An entry in the vrPpIpxPStatsTable.

vrPpIpxPStateChanges

Number of times the port has changed state. This counter wraps around to zero after reaching the maximum value of 4294967295.

vrPpIpxPInReceives

Total number of packets received. This counter wraps around to zero after reaching the maximum value of 4294967295.

vrPpIpxPForwarded

Number of packets forwarded. This counter wraps around to zero after reaching the maximum value of 4294967295.

vrPpIpxPRipPRowStatusTable

This entry controls the addition and deletion of vrPpIpxPRipP components.

vrPpIpxPRipPRowStatusEntry

A single entry in the table represents a single vrPpIpxPRipP component.

vrPpIpxPRipPRowStatus

This variable is used as the basis for SNMP naming of vrPpIpxPRipP components. These components cannot be added nor deleted.

vrPpIpxPRipPComponentName

This variable provides the component's string name for use with the ASCII Console Interface

vrPpIpxPRipPStorageType

This variable represents the storage type value for the vrPpIpxPRipP tables.

vrPpIpxPRipPIndex

This variable represents the index for the vrPpIpxPRipP tables.

vrPpIpxPRipPStatsTable

RIP specific statistics for this IpxPort.

vrPpIpxPRipPStatsEntry

An entry in the vrPpIpxPRipPStatsTable.

vrPpIpxPRipPInPackets

The number of RIP packets received on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295.

vrPpIpxPRipPInRequests

The number of RIP request packets received on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295.

vrPpIpxPRipPInResponses

The number of RIP response packets received on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295.

vrPpIpxPRipPOutPackets

The number of RIP packets sent out on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295.

vrPpIpxPRipPOutRequests

The number of RIP request packets sent out on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295.

vrPpIpxPRipPOutResponses

The number of RIP response packets sent out on this IpxPort. This includes RIP periodic update packets. This counter wraps around to zero after reaching the maximum value of 4294967295.

vrPpIpxPRipPIncorrectPackets

Number of times that an incorrectly formatted RIP packet was received on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295.

vrPpIpxPSapPRowStatusTable

This entry controls the addition and deletion of vrPpIpxPSapP components.

vrPpIpxPSapPRowStatusEntry

A single entry in the table represents a single vrPpIpxPSapP component.

vrPpIpxPSapPRowStatus

This variable is used as the basis for SNMP naming of vrPpIpxPSapP components. These components cannot be added nor deleted.

vrPpIpxPSapPComponentName

This variable provides the component's string name for use with the ASCII Console Interface

vrPpIpxPSapPStorageType

This variable represents the storage type value for the vrPpIpxPSapP tables.

vrPpIpxPSapPIndex

This variable represents the index for the vrPpIpxPSapP tables.

vrPpIpxPSapPStatsTable

SAP specific statistics for this IpxPort.

vrPpIpxPSapPStatsEntry

An entry in the vrPpIpxPSapPStatsTable.

vrPpIpxPSapPInPackets

The total number of SAP packets received on this IpxPort. Includes SAP requests and responses. This counter wraps around to zero after reaching the maximum value of 4294967295.

vrPpIpxPSapPInRequests

The number of SAP Request packets received on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295.

vrPpIpxPSapPInResponses

The number of SAP response packets received on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295.

vrPpIpxPSapPOutPackets

The total number of SAP packets sent out this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295.

vrPpIpxPSapPOutRequests

The number of SAP request packets sent out on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295.

vrPpIpxPSapPOutResponses

The number of SAP response packets sent out this IpxPort. This includes periodic SAP update packets. This counter wraps around to zero after reaching the maximum value of 4294967295.

vrPpIpxPSapPIncorrectPackets

Number of times an incorrectly formatted SAP packet was received on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295.

vrPpIpxPIWPRowStatusTable

*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrPpIpxPIWP components.

vrPpIpxPIWPRowStatusEntry

A single entry in the table represents a single vrPpIpxPIWP component.

vrPpIpxPIWPRowStatus

This variable is used as the basis for SNMP naming of vrPpIpxPIWP components. These components cannot be added nor deleted.

vrPpIpxPIWPComponentName

This variable provides the component's string name for use with the ASCII Console Interface

vrPpIpxPIWPStorageType

This variable represents the storage type value for the vrPpIpxPIWP tables.

vrPpIpxPIWPRemoteStationIdentifierIndex

This variable represents the index for the vrPpIpxPIWP tables.

vrPpIpxPIWPOperTable

*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains operational attributes that are specific for the IPXWAN protocol.

vrPpIpxPIWPOperEntry

An entry in the vrPpIpxPIWPOperTable.

vrPpIpxPIWPNeighbourRouterName

The name of the neighboring router on a WAN circuit.

vrPpIpxPIWPNeighbourInternalNetworkNumber

The internal network number of the neighboring router on a WAN circuit.

vrPpIpxPIWPInitFails

The number of times initialization has failed on this circuit. This counter wraps around to zero after reaching the maximum value of 4294967295

vrPpIpxPNetSentryPRowStatusTable

This entry controls the addition and deletion of vrPpIpxPNetSentryP components.

vrPpIpxPNetSentryPRowStatusEntry

A single entry in the table represents a single vrPpIpxPNetSentryP component.

vrPpIpxPNetSentryPRowStatus

This variable is used as the basis for SNMP naming of vrPpIpxPNetSentryP components. These components can be added and deleted.

vrPpIpxPNetSentryPComponentName

This variable provides the component's string name for use with the ASCII Console Interface

vrPpIpxPNetSentryPStorageType

This variable represents the storage type value for the vrPpIpxPNetSentryP tables.

vrPpIpxPNetSentryPIndex

This variable represents the index for the vrPpIpxPNetSentryP tables.

vrPpIpxPNetSentryPProvTable

This group contains the NetSentry attributes that specify the names of the NetSentry filters which will be applied to IPX packets as incoming and outgoing filters.

vrPpIpxPNetSentryPProvEntry

An entry in the vrPpIpxPNetSentryPProvTable.

vrPpIpxPNetSentryPInComingFilter

This attribute specifies the name of the NetSentry filter applied to incoming IPX packets on this port.

vrPpIpxPNetSentryPOutGoingFilter

The name of the filter applied to outgoing IPX packets on this port.

vrIpxRowStatusTable

This entry controls the addition and deletion of vrIpx components.

vrIpxRowStatusEntry

A single entry in the table represents a single vrIpx component.

vrIpxRowStatus

This variable is used as the basis for SNMP naming of vrIpx components. These components can be added and deleted.

vrIpxComponentName

This variable provides the component's string name for use with the ASCII Console Interface

vrIpxStorageType

This variable represents the storage type value for the vrIpx tables.

vrIpxIndex

This variable represents the index for the vrIpx tables.

vrIpxAdminControlTable

This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component.

vrIpxAdminControlEntry

An entry in the vrIpxAdminControlTable.

vrIpxSnmpAdminStatus

The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no o ...

vrIpxProvTable

IPX system provisionable attributes.

vrIpxProvEntry

An entry in the vrIpxProvTable.

vrIpxNetworkNumber

This attribute indicates the internal network number portion of the IPX address. This network number must be unique within the internetwork and is necessary to determine master/slave relationships during IPXWAN negotiations.

vrIpxMaxPathSplits

This attribute indicates the maximum number of paths with equal routing metric value which this instance of IPX may split between when forwarding packets.

vrIpxMaxHops

This attribute indicates the maximum number of hops a packet may take.

vrIpxRipUpdateInterval

The RIP periodic update interval, in seconds.

vrIpxSapUpdateInterval

The SAP periodic update interval, in seconds.

vrIpxControlDelay

The delay, in microsecs, between receiving a request from a client and sending a response. This router is significantly faster than some Ipx clients. If a problem is being experienced between a router and an Ipx client, it might be resolved by changing th ...

vrIpxUpdateDelay

The delay, in milliseconds, between sending consecutive (RIP and/or SAP) packets. 55 milliseconds is the minimum specified in the Ipx Router Specification.

vrIpxRipAgeMultiplier

After this many Rip Update intervals unrefreshed Rip information is considered expired.

vrIpxSapAgeMultiplier

After this many SAP Update intervals unrefreshed SAP information is considered expired.

vrIpxDamping

This attribute specifies whether damping is applied. Damping refers to the damping of incoming RIP and SAP requests. It handles cases where a rogue client or server is making an extraodinary number of requests. With damping set to disabled, the switch wi ...

vrIpxRipMaxDampedGeneralRequests

This attribute is only used when the attribute damping is enabled. It is used to limit the average rate at which the switch responds to general RIP requests. If more than this number are received within a ten second interval, the first ripMaxDampedGeneral ...

vrIpxRipMaxDampedSpecificRequests

This attribute is only used when the attribute damping is enabled. It is used to limit the average rate at which the switch responds to specific RIP requests. If more than this number are received within a ten second interval, the first ripMaxDampedSpecif ...

vrIpxSapMaxDampedGeneralRequests

This attribute is only used when the attribute damping is enabled. It is used to limit the average rate at which the switch responds to general SAP requests. If more than this number are received within a ten second interval, the first sapMaxDampedGeneral ...

vrIpxSapMaxDampedSpecificRequests

This attribute is only used when the attribute damping is enabled. It is used to limit the average rate at which the switch responds to specific SAP requests. If more than this number are received within a ten second interval, the first sapMaxDampedSpecif ...

vrIpxInitialGeneralRequests

This attribute specifies whether the RIP and SAP general requests are sent out a port when the port first comes up. If this attribute is enabled the initial requests will be made; whereas if the attribute is disabled the initial requests will not be mad ...

vrIpxHoldDownInterval

This attribute specifies an interval, after a network is removed from the route table, during which other incoming route updates for the same network will be ignored. The use of this interval prevents the slow convergence which results when switches that ...

vrIpxStateTable

This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses ...

vrIpxStateEntry

An entry in the vrIpxStateTable.

vrIpxAdminState

This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this ...

vrIpxOperationalState

This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that t ...

vrIpxUsageState

This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value b ...

vrIpxOperStatusTable

This group includes the Operational Status attribute. This attribute defines the current operational state of this component.

vrIpxOperStatusEntry

An entry in the vrIpxOperStatusTable.

vrIpxSnmpOperStatus

The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operation ...

vrIpxOperTable

This group contains IPX related operational attributes.

vrIpxOperEntry

An entry in the vrIpxOperTable.

vrIpxProtocolPortCount

The number of portsknown to this instance of Ipx.

vrIpxDestinationCount

The number of currently reachable destinations known to Ipx.

vrIpxServicesCount

The number of Services known to Ipx.

vrIpxStatsTable

This group contains IPX related statistics on the CP.

vrIpxStatsEntry

An entry in the vrIpxStatsTable.

vrIpxInReceives

This attribute counts the total number of IPX packets received, including those received in error. This counter wraps around to zero after reaching the maximum value of 4294967295.

vrIpxInHeaderErrors

The number of IPX packets discarded due to errors in their headers, including any IPX packet with a size less than the minimum of 30 bytes. This counter wraps around to zero after reaching the maximum value of 4294967295.

vrIpxInUnknownSocket

The number of IPX packets discarded because the destination socket was not open. This counter wraps around to zero after reaching the maximum value of 4294967295.

vrIpxInDiscards

Number of packets received but discarded due to reasons other than those accounted for by inHeaderErrors and inUnknownSocket. This counter wraps around to zero after reaching the maximum value of 4294967295.

vrIpxInBadChecksums

Number of packets received with incorrect checksums. This counter wraps around to zero after reaching the maximum value of 4294967295.

vrIpxInDelivers

Number of IPX packets delivered locally, including packets from local applications. This counter wraps around to zero after reaching the maximum value of 4294967295.

vrIpxNoRoutes

Number of times no route to a destination was found. This counter wraps around to zero after reaching the maximum value of 4294967295.

vrIpxOutRequests

The number of IPX packets supplied locally for transmission, not including any packets counted in the forwarded attribute. This counter wraps around to zero after reaching the maximum value of 4294967295.

vrIpxOutMalformedRequests

Number of outgoing packets supplied locally that contained errors in their structure. This counter wraps around to zero after reaching the maximum value of 4294967295.

vrIpxOutDiscards

The number of outgoing IPX packets discarded due to reasons other than those accounted for in outMalformedRequests or outFiltered. This counter wraps around to zero after reaching the maximum value of 4294967295.

vrIpxOutPackets

The total number of IPX packets transmitted. This counter wraps around to zero after reaching the maximum value of 4294967295.

vrIpxInTooManyHops

Number of packets discarded due to exceeding the maxHops value. This counter wraps around to zero after reaching the maximum value of 4294967295.

vrIpxInFiltered

The number of incoming IPX packets discarded due to filtering. This counter wraps around to zero after reaching the maximum value of 4294967295.

vrIpxInNetBIOS

The number of NetBIOS packets received. This counter wraps around to zero after reaching the maximum value of 4294967295.

vrIpxForwarded

The number of IPX packets forwarded. This counter wraps around to zero after reaching the maximum value of 4294967295.

vrIpxOutFiltered

The number of outgoing packets discarded due to filtering. This also includes the number of forwarded packets filtered. This counter wraps around to zero after reaching the maximum value of 4294967295.

vrIpxRipRowStatusTable

This entry controls the addition and deletion of vrIpxRip components.

vrIpxRipRowStatusEntry

A single entry in the table represents a single vrIpxRip component.

vrIpxRipRowStatus

This variable is used as the basis for SNMP naming of vrIpxRip components. These components cannot be added nor deleted.

vrIpxRipComponentName

This variable provides the component's string name for use with the ASCII Console Interface

vrIpxRipStorageType

This variable represents the storage type value for the vrIpxRip tables.

vrIpxRipIndex

This variable represents the index for the vrIpxRip tables.

vrIpxRipStatsTable

IPX statistics related to the RIP protocol.

vrIpxRipStatsEntry

An entry in the vrIpxRipStatsTable.

vrIpxRipRipIn

This attribute counts the total number of IPX RIP packets received. This counter wraps around to zero after reaching the maximum value of 4294967295.

vrIpxRipRipOut

This attribute counts the total number of RIP packets locally generated and sent out. This counter wraps around to zero after reaching the maximum value of 4294967295.

vrIpxRipRipIncorrectPackets

This attribute counts the number of times an incorrectly formatted RIP packet was received. This counter wraps around to zero after reaching the maximum value of 4294967295.

vrIpxRipRFltrRowStatusTable

This entry controls the addition and deletion of vrIpxRipRFltr components.

vrIpxRipRFltrRowStatusEntry

A single entry in the table represents a single vrIpxRipRFltr component.

vrIpxRipRFltrRowStatus

This variable is used as the basis for SNMP naming of vrIpxRipRFltr components. These components can be added and deleted.

vrIpxRipRFltrComponentName

This variable provides the component's string name for use with the ASCII Console Interface

vrIpxRipRFltrStorageType

This variable represents the storage type value for the vrIpxRipRFltr tables.

vrIpxRipRFltrIdentifierIndex

This variable represents the index for the vrIpxRipRFltr tables.

vrIpxRipRFltrProvTable

This is the provisionable attribute group for RipFilter.

vrIpxRipRFltrProvEntry

An entry in the vrIpxRipRFltrProvTable.

vrIpxRipRFltrHops

This attribute specifies the distance in terms of number of hops. Networks in RIP packets which are the specified distance away from the switch are filtered or passed depending on the disposition of the filter. A hops value preceded by an equality operato ...

vrIpxRipRFltrTicks

This attribute specifies the distance in terms of delay in ticks. A tick is 1/ 18 of a second. Networks in RIP packets which are the specified distance away from the switch are filtered or passed depending on the disposition of the filter. A ticks value p ...

vrIpxRipRFltrNetworkNumber

This attribute specifies the network number of matching networks in RIP packets to be filtered or passed depending on the disposition of the filter. The network number can be entered either as a dashed hex string or a string of hex digits entered in pairs ...

vrIpxRipRFltrNode

This attribute specifies the node portion in the source IPX address (that is, the MAC address or circuit ID) of received RIP packets for which the contained network tuples should be filtered or passed depending on the disposition of the filter. This attri ...

vrIpxRipRFltrPort

This attribute specifies the name of a protocol port whereby networks learned over this port are to be filtered or passed depending on the disposition of the filter. This attribute is only valid for filters applied to a port in the output direction and wi ...

vrIpxRipRFltrDisposition

This attribute indicates a reversal of the filter pattern match. If the value is pass, then matching filters will cause the RIP packet tuple to be passed. If the value is filter, then matching filters will cause the RIP packet tuple to be filtered.

vrIpxRipRFltrOperTable

This is the operational attribute group for IpxRipFilter.

vrIpxRipRFltrOperEntry

An entry in the vrIpxRipRFltrOperTable.

vrIpxRipRFltrNumberOfApplyEntries

This attribute indicates the number of times this filter is referenced by a RipApplyEntry. If zero, this filter is not applied on any ports.

vrIpxRipRipAppRowStatusTable

This entry controls the addition and deletion of vrIpxRipRipApp components.

vrIpxRipRipAppRowStatusEntry

A single entry in the table represents a single vrIpxRipRipApp component.

vrIpxRipRipAppRowStatus

This variable is used as the basis for SNMP naming of vrIpxRipRipApp components. These components can be added and deleted.

vrIpxRipRipAppComponentName

This variable provides the component's string name for use with the ASCII Console Interface

vrIpxRipRipAppStorageType

This variable represents the storage type value for the vrIpxRipRipApp tables.

vrIpxRipRipAppProtocolPortNameIndex

This variable represents an index for the vrIpxRipRipApp tables.

vrIpxRipRipAppFilterIdentifierIndex

This variable represents an index for the vrIpxRipRipApp tables.

vrIpxRipRipAppProvTable

This is the RipApplyEntry provisionable group of attributes.

vrIpxRipRipAppProvEntry

An entry in the vrIpxRipRipAppProvTable.

vrIpxRipRipAppDirection

This attribute specifies whether this RIP filter is applied as an input filter or an output filter. If set to none, this indicates that the filter, though applied to the port, is not currently active in either direction.

vrIpxSapRowStatusTable

This entry controls the addition and deletion of vrIpxSap components.

vrIpxSapRowStatusEntry

A single entry in the table represents a single vrIpxSap component.

vrIpxSapRowStatus

This variable is used as the basis for SNMP naming of vrIpxSap components. These components cannot be added nor deleted.

vrIpxSapComponentName

This variable provides the component's string name for use with the ASCII Console Interface

vrIpxSapStorageType

This variable represents the storage type value for the vrIpxSap tables.

vrIpxSapIndex

This variable represents the index for the vrIpxSap tables.

vrIpxSapStatsTable

IPX statistics specific to the SAP protocol.

vrIpxSapStatsEntry

An entry in the vrIpxSapStatsTable.

vrIpxSapSapIn

The total number of SAP packets received. This counter wraps around to zero after reaching the maximum value of 4294967295.

vrIpxSapSapOut

The total number of SAP packets locally generated and sent out. This counter wraps around to zero after reaching the maximum value of 4294967295.

vrIpxSapSapIncorrectPackets

The number of times an incorrectly formatted SAP packet was received. This counter wraps around to zero after reaching the maximum value of 4294967295.

vrIpxSapSFltrRowStatusTable

This entry controls the addition and deletion of vrIpxSapSFltr components.

vrIpxSapSFltrRowStatusEntry

A single entry in the table represents a single vrIpxSapSFltr component.

vrIpxSapSFltrRowStatus

This variable is used as the basis for SNMP naming of vrIpxSapSFltr components. These components can be added and deleted.

vrIpxSapSFltrComponentName

This variable provides the component's string name for use with the ASCII Console Interface

vrIpxSapSFltrStorageType

This variable represents the storage type value for the vrIpxSapSFltr tables.

vrIpxSapSFltrIdentifierIndex

This variable represents the index for the vrIpxSapSFltr tables.

vrIpxSapSFltrProvTable

The provisionable attribute group for SapFilter.

vrIpxSapSFltrProvEntry

An entry in the vrIpxSapSFltrProvTable.

vrIpxSapSFltrType

This attribute specifies the Novell Service type of the services to be filtered from the SAP packets. The type can be entered either as a dashed hex string or a string of hex digits entered in pairs of hex digits up to a maximum length of 4 digits. (For e ...

vrIpxSapSFltrName

This attribute specifies the readable name of the service to be filtered from SAP packets. The name can be 47 characters or less. This does not include the caret (^) character which precedes the name. A name preceded by a caret (^) should be interpreted a ...

vrIpxSapSFltrNetworkNumber

This attribute specifies the network number of the service to be filtered from SAP packets. The network number can be entered either as a dashed hex string or a string of hex digits entered in pairs of hex digits up to a maximum length of 8 digits. (For e ...

vrIpxSapSFltrNode

This attribute specifies the node portion of the IPX address of the service to be filtered from SAP packets. The node number can be entered either as a dashed hex string or a string of hex digits entered in pairs of hex digits up to a maximum length of 12 ...

vrIpxSapSFltrDisposition

Indicates a reversal of the filter pattern match.

vrIpxSapSFltrOperTable

The operational attribute group for IpxSapFilter.

vrIpxSapSFltrOperEntry

An entry in the vrIpxSapSFltrOperTable.

vrIpxSapSFltrNumberOfApplyEntries

The number of times this filter appears in IpxSapApplyEntry. If zero, this filter is not applied on any ports.

vrIpxSapSapAppRowStatusTable

This entry controls the addition and deletion of vrIpxSapSapApp components.

vrIpxSapSapAppRowStatusEntry

A single entry in the table represents a single vrIpxSapSapApp component.

vrIpxSapSapAppRowStatus

This variable is used as the basis for SNMP naming of vrIpxSapSapApp components. These components can be added and deleted.

vrIpxSapSapAppComponentName

This variable provides the component's string name for use with the ASCII Console Interface

vrIpxSapSapAppStorageType

This variable represents the storage type value for the vrIpxSapSapApp tables.

vrIpxSapSapAppProtocolPortNameIndex

This variable represents an index for the vrIpxSapSapApp tables.

vrIpxSapSapAppFilterIdentifierIndex

This variable represents an index for the vrIpxSapSapApp tables.

vrIpxSapSapAppProvTable

The IpxSapApplyEntry provisionable group of attributes.

vrIpxSapSapAppProvEntry

An entry in the vrIpxSapSapAppProvTable.

vrIpxSapSapAppDirection

Indicates whether this SAP filter is applied as an input filter or an output filter.

vrIpxFwdRowStatusTable

*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpxFwd components.

vrIpxFwdRowStatusEntry

A single entry in the table represents a single vrIpxFwd component.

vrIpxFwdRowStatus

This variable is used as the basis for SNMP naming of vrIpxFwd components. These components cannot be added nor deleted.

vrIpxFwdComponentName

This variable provides the component's string name for use with the ASCII Console Interface

vrIpxFwdStorageType

This variable represents the storage type value for the vrIpxFwd tables.

vrIpxFwdNetworkNumberIndex

This variable represents the index for the vrIpxFwd tables.

vrIpxFwdOperTable

*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** IpxForwarding operational attributes.

vrIpxFwdOperEntry

An entry in the vrIpxFwdOperTable.

vrIpxFwdProtocol

The routing protocol from which knowledge of this destination was obtained.

vrIpxFwdTicks

The delay, in ticks, to reach this destination.

vrIpxFwdHopCount

The number of hops required to reach this destination.

vrIpxFwdProtocolPortId

The unique identifier of the ProtocolPort used to reach the next hop.

vrIpxFwdNextHopPhysAddress

The physical address of the next hop

vrIpxFwdNextHopNetworkNumber

The IPX network number of the next hop.

vrIpxSrvcRowStatusTable

*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpxSrvc components.

vrIpxSrvcRowStatusEntry

A single entry in the table represents a single vrIpxSrvc component.

vrIpxSrvcRowStatus

This variable is used as the basis for SNMP naming of vrIpxSrvc components. These components cannot be added nor deleted.

vrIpxSrvcComponentName

This variable provides the component's string name for use with the ASCII Console Interface

vrIpxSrvcStorageType

This variable represents the storage type value for the vrIpxSrvc tables.

vrIpxSrvcNetworkNumberIndex

This variable represents an index for the vrIpxSrvc tables.

vrIpxSrvcNodeIndex

This variable represents an index for the vrIpxSrvc tables.

vrIpxSrvcTypeIndex

This variable represents an index for the vrIpxSrvc tables.

vrIpxSrvcNameIndex

This variable represents an index for the vrIpxSrvc tables.

vrIpxSrvcOperTable

*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** The Ipx Services Operational group.

vrIpxSrvcOperEntry

An entry in the vrIpxSrvcOperTable.

vrIpxSrvcSocket

Socket at which the service is available

vrIpxSrvcProtocol

The protocol from which knowledge of this service was obtained.

vrIpxSrvcHopCount

Number of hops to the service.

vrIpxAdjRowStatusTable

*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpxAdj components.

vrIpxAdjRowStatusEntry

A single entry in the table represents a single vrIpxAdj component.

vrIpxAdjRowStatus

This variable is used as the basis for SNMP naming of vrIpxAdj components. These components cannot be added nor deleted.

vrIpxAdjComponentName

This variable provides the component's string name for use with the ASCII Console Interface

vrIpxAdjStorageType

This variable represents the storage type value for the vrIpxAdj tables.

vrIpxAdjProtocolPortIdentifierIndex

This variable represents an index for the vrIpxAdj tables.

vrIpxAdjNetworkNumberIndex

This variable represents an index for the vrIpxAdj tables.

vrIpxAdjOperTable

*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** The Adjacencies operational group.

vrIpxAdjOperEntry

An entry in the vrIpxAdjOperTable.

vrIpxAdjPhysAddress

The physical address of the adjacent router.

vrIpxAdjAdjacencyState

The state of the connection to the adjacent router.

vrIpxNsRowStatusTable

This entry controls the addition and deletion of vrIpxNs components.

vrIpxNsRowStatusEntry

A single entry in the table represents a single vrIpxNs component.

vrIpxNsRowStatus

This variable is used as the basis for SNMP naming of vrIpxNs components. These components can be added and deleted.

vrIpxNsComponentName

This variable provides the component's string name for use with the ASCII Console Interface

vrIpxNsStorageType

This variable represents the storage type value for the vrIpxNs tables.

vrIpxNsIndex

This variable represents the index for the vrIpxNs tables.

vrIpxNsProvTable

The provisionable attribute group for the IpxNetSentry component.

vrIpxNsProvEntry

An entry in the vrIpxNsProvTable.

vrIpxNsFirstFilter

First NetSentry filter for Ipx. If specified this filter is applied before any other NetSentry filters applicable to the packet.

vrIpxNsLastFilter

Last filter for Ipx. If specified this filter is applied after all other NetSentry filters applicable to the packet.

vrIpxNsLocalInFilter

The filter name of the NetSentry filter to be applied at the Local In filter point.

vrIpxNsLocalOutFilter

The filter name of the NetSentry filter to be applied at the Local Out filter point.

vrIpxNsNetSentryAppRowStatusTable

This entry controls the addition and deletion of vrIpxNsNetSentryApp components.

vrIpxNsNetSentryAppRowStatusEntry

A single entry in the table represents a single vrIpxNsNetSentryApp component.

vrIpxNsNetSentryAppRowStatus

This variable is used as the basis for SNMP naming of vrIpxNsNetSentryApp components. These components can be added and deleted.

vrIpxNsNetSentryAppComponentName

This variable provides the component's string name for use with the ASCII Console Interface

vrIpxNsNetSentryAppStorageType

This variable represents the storage type value for the vrIpxNsNetSentryApp tables.

vrIpxNsNetSentryAppEntryIndex

This variable represents the index for the vrIpxNsNetSentryApp tables.

vrIpxNsNetSentryAppProvTable

The Provisionable group for the IpxNetSentryApplyList.

vrIpxNsNetSentryAppProvEntry

An entry in the vrIpxNsNetSentryAppProvTable.

vrIpxNsNetSentryAppFilter

The name of the filter to be applied to packets matching the conditions in this entry of the IpxNetSentryApplyList.

vrIpxNsNetSentryAppNetworkNumber1

The first IPX network Number used to compare. This network number can be entered either as a dashed hex string or a string of hex digits. (For example a valid network number would be ff-ff-ff-ff or ffffffff). In addition a value of * will be accepted as a ...

vrIpxNsNetSentryAppNode1

This attribute is the first IPX node address used to compare. This node number can be entered either as a dashed hex string or a string of hex digits. (For example a valid node number would be ff-ff-ff-ff-ff-ff or ffffffffffff). In addition a value of * w ...

vrIpxNsNetSentryAppDirection

Indicates the direction a packet must be moving between the first and second apply list entries in order for the entries to match. First 'to' second, first 'from' second, or first 'tofrom' second (either direction).

vrIpxNsNetSentryAppNetworkNumber2

The second IPX network Number used to compare. This network number can be entered either as a dashed hex string or a string of hex digits. (For example a valid network number would be ff-ff-ff-ff or ffffffff). In addition a value of * will be accepted as ...

vrIpxNsNetSentryAppNode2

This attribute is the second IPX node address used to compared. This node can be entered either as a dashed hex string or a string of hex digits. (For example a valid network number would be ff-ff-ff-ff-ff-ff or ffffffffffff). In addition a value of * wil ...