SWL3MGMT-MIB

SWL3MGMT-MIB Download

MIBs list

The Structure of Layer 3 Network Management Information for the proprietary enterprise.

IPHost Network Monitor offer an easy way of SNMP monitoring your D-Link Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for SWL3MGMT-MIB

swL3DevCtrlRIPState
This object indicates Routing Information Protocol (RIP) version 2 function is enabled or disabled.
swL3DevCtrlOSPFState
This object indicates OSPF protocol is enabled or disabled.
swL3DevCtrlDVMRPState
This object indicates DVMRP protocol is enabled or disabled.
swL3DevCtrlPIMDMState
This object indicates PIM-DM protocol is enabled or disabled.
swL3DevCtrlVrrpState
This object indicates VRRP protocol is enabled or disabled.
swL3DevCtrlVrrpPingState
This object indicates VRRP protocol Ping is enabled or disabled.
swL3DevCtrlDHCPAutoConfigState
This object indicates auto config is enabled or disabled.
swL3IpCtrlTable
This table contain IP interface information.
swL3IpCtrlEntry
A list of information about a specific IP interface.
swL3IpCtrlIpAddr
The IP address of the interface. This object only can take the value of the unicast IP address.
swL3IpCtrlIfIndex
This object uniquely identifies the IP interface number in the swL3IpCtrlTable.
swL3IpCtrlInterfaceName
This object indicates the name of the IP interface.
swL3IpCtrlIpSubnetMask
The IP net mask for this interface.
swL3IpCtrlVlanName
This object indicates the IP control entry's VLAN name. The VLAN name in each entry must be unique in the IP Control Table.
swL3IpCtrlMode
This object indicates the IP operation mode. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. manual(2) - the IP address will be set by manual. bootp(3) - the IP a ...
swL3IpCtrlSecondary
When this is true(1) the IP address is the secondary IP. When false(2), the IP address is the primary IP.
swL3IpCtrlState
This variable displays the status of the entry. The status used for creating, modifying, and deleting instances of the objects in this table.
swL3IpCtrlOperState
The current operational state of the IP interface.PS: Link state
swL3IpCtrlAdminState
The state of a specific IP interface.
swL3IpFdbInfoTable
A table that contains forwarding and/or filtering information. This information is used by the switch in determining how to propagate the received IP packets.
swL3IpFdbInfoEntry
Information about a specific IP address for which the bridge has some forwarding and/or filtering information.
swL3IpFdbInfoIpSubnetMask
A IP net mask for this interface.for which switch has forwarding and/or filtering information.
swL3IpFdbInfoPort
Either the value '0', or the port number of the port on which packet having a IP address equal to the value of the corresponding instance of swL3IpFdbInfoIpAddr has been seen. A value of '0' indicates that the port number has not been learned but that swi ...
swL3IpFdbInfoType
The status of this entry.
swL3IpStaticRouteTable
This entity's IP static Routing table.
swL3IpStaticRouteEntry
A particular route to a particular destination, under a particular policy. Once an entry be built,it shouldn't be modified.That is,it just support create and delete action.
swL3IpStaticRouteDest
The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the v ...
swL3IpStaticRouteMask
Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the swL3IpStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the swL3I ...
swL3IpStaticRouteBkupState
The routing state for this route.The value SHOULD be primary(1) or backup(2).
swL3IpStaticRouteNextHop
On remote routes, the address of the next sys- tem en route; Otherwise, 0.0.0.0.
swL3IpStaticRouteMetric
The routing metric for this route.
swL3IpStaticRouteStatus
This object indicates the status of this entry.
swL3RelayBootpState
This object indicates BOOTP Relay function is enabled or disabled.
swL3RelayBootpHopCount
This object indicates the maximum number of router hops that the BOOTP packets can cross.
swL3RelayBootpTimeThreshold
This object indicates the minimum time in seconds within which the switch must relay the BOOTP request. If this time is exceeded, the switch will drop the BOOTP packet.
swL3RelayBootpCtrlTable
This table specifys the IP address as a destination to forward (relay) BOOTP packets to.
swL3RelayBootpCtrlEntry
A list of information specifies the IP address as a destination to forward (relay) BOOTP packets to.
swL3RelayBootpCtrlInterfaceName
The name of the IP interface.
swL3RelayBootpCtrlServer
The BOOTP server IP address.
swL3RelayBootpCtrlState
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object, and then the corresp ...
swL3RelayDnsState
This object indicates DNS Relay function is enabled or disabled.
swL3RelayDnsPrimaryServer
This object indicates the address of the primary DNS server.
swL3RelayDnsSecondaryServer
This object indicates the address of the secondary DNS server.
swL3RelayDnsCacheState
This object indicates DNS Relay cache is enabled or disabled.
swL3RelayDnsStaticTableState
This object indicates DNS Relay static table is enabled or disabled.
swL3RelayDnsCtrlTable
This table display the current DNS relay static table.
swL3RelayDnsCtrlEntry
A list of information display the current DNS relay static table.
swL3RelayDnsCtrlDomainName
The domain name of the entry.
swL3RelayDnsCtrlIpAddr
The IP address of the entry.
swL3RelayDnsCtrlState
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object, and then the corresp ...
swL3Md5Table
This table display the current MD5 key table.
swL3Md5Entry
A list of information display the current MD5 key table.
swL3Md5KeyId
The MD5 key ID.
swL3Md5Key
An MD5 password of up to 16 bytes.
swL3Md5RowStatus
This object indicates the status of this entry.
swL3RouteRedistriTable
Route redistribution allows routers on the network. That are running different routing protocols to exchange routing information. This is accomplished by comparing the routes stored in the vairous router¡¦s routing tables and assinging appropriate metrics ...
swL3RouteRedistriEntry
A list of information display the route redistribution table.
swL3RouteRedistriSrcProtocol
Allows the selection of the protocol of the source device.
swL3RouteRedistriDstProtocol
Allows the selection of the protocol of the destination device.
swL3RouteRedistriType
Allows the selection of one of the methods for calcalculating the metric value.
swL3RouteRedistriMetric
Allows the entry of an OSPF interface cost. This is analogous to a Hop Count in the RIP routing protocol. The value '0' indicates default value.
swL3RouteRedistriRowStatus
This object indicates the status of this entry.
swL3OspfHostTable
The list of Hosts, and their metrics, that the router will advertise as host routes.
swL3OspfHostEntry
A metric to be advertised, for a given type of service, when a given host is reachable.
swL3OspfHostIpAddress
The IP Address of the Host.
swL3OspfHostTOS
The Type of Service of the route being configured.
swL3OspfHostMetric
The Metric to be advertised.
swL3OspfHostAreaID
The Area the Host Entry is to be found within. By default, the area that a subsuming OSPF interface is in, or 0.0.0.0
swL3OspfHostStatus
This variable displays the status of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
swL3ospfVirtIfTable
Information about this router's virtual inter- faces.
swL3ospfVirtIfEntry
Information about a single Virtual Interface.
swL3ospfVirtIfAreaId
The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0
swL3ospfVirtIfNeighbor
The Router ID of the Virtual Neighbor.
swL3ospfVirtIfTransitDelay
The estimated number of seconds it takes to transmit a link- state update packet over this interface.
swL3ospfVirtIfRetransInterval
The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state request packets. This value should b ...
swL3ospfVirtIfHelloInterval
The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for the virtual neighbor.
swL3ospfVirtIfRtrDeadInterval
The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neigh- bor.
swL3ospfVirtIfState
OSPF virtual interface states.
swL3ospfVirtIfEvents
The number of state changes or error events on this Virtual Link
swL3ospfVirtIfAuthType
The authentication type specified for a virtu- al interface. Additional authentication types may be assigned locally.
swL3ospfVirtIfAuthKey
If Authentication Type is simplePassword, the device will left adjust and zero fill to 8 oc- tets. Note that unauthenticated interfaces need no authentication key, and simple password authen- tication cannot use a key of more than 8 oc- tets. Lar ...
swL3ospfVirtIfAuthKeyID
The MD5 key ID.
swL3ospfVirtIfStatus
This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
swL3ospfIfTable
The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF.
swL3ospfIfEntry
The OSPF Interface Entry describes one inter- face from the viewpoint of OSPF.
swL3ospfIfIpAddress
The IP address of this OSPF interface.
swL3ospfAddressLessIf
For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces having no IP Address.
swL3ospfIfAreaId
A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.
swL3ospfIfType
The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broad- cast LANs, such as Ethernet and IEEE 802.5, take the value 'broadcast', X.25 and similar technologies take the value 'nbma', a ...
swL3ospfIfAdminStat
The OSPF interface's administrative status. The value formed on the interface, and the in- terface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to OSPF.
swL3ospfIfRtrPriority
The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligi- ble to become the designated router on this particular netw ...
swL3ospfIfTransitDelay
The estimated number of seconds it takes to transmit a link state update packet over this interface.
swL3ospfIfRetransInterval
The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state request packets.
swL3ospfIfHelloInterval
The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for all routers attached to a common network.
swL3ospfIfRtrDeadInterval
The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common netw ...
swL3ospfIfPollInterval
The larger time interval, in seconds, between the Hello packets sent to an inactive non- broadcast multi- access neighbor.
swL3ospfIfState
The OSPF Interface State.
swL3ospfIfDesignatedRouter
The IP Address of the Designated Router.
swL3ospfIfBackupDesignatedRouter
The IP Address of the Backup Designated Router.
swL3ospfIfEvents
The number of times this OSPF interface has changed its state, or an error has occurred.
swL3ospfIfMulticastForwarding
The way multicasts should forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link uni- casts. Data link multicasting is not meaning- ful on point to point and NBMA interfaces, and setting ospfMult ...
swL3ospfIfDemand
Indicates whether Demand OSPF procedures (hel- lo supression to FULL neighbors and setting the DoNotAge flag on proogated LSAs) should be per- formed on this interface.
swL3ospfIfAuthType
The authentication type specified for an in- terface. Additional authentication types may be assigned locally.
swL3ospfIfAuthKey
The Authentication Key. If the Area's Author- ization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. Note that unauthenticated interfaces need no authentication key, and s ...
swL3ospfIfAuthKeyID
The MD5 key ID.
swL3ospfIfStatus
This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
swL3dvmrpInterfaceTable
The (conceptual) table listing the router's multicast- capable interfaces.
swL3dvmrpInterfaceEntry
An entry (conceptual row) in the dvmrpInterfaceTable. This row augments ipMRouteInterfaceEntry in the IP Multicast MIB, where the threshold object resides.
swL3dvmrpInterfaceIfIndex
The ifIndex value of the interface for which DVMRP is enabled.
swL3dvmrpInterfaceLocalAddress
The IP address this system will use as a source address on this interface. On unnumbered interfaces, it must be the same value as dvmrpInterfaceLocalAddress for some interface on the system.
swL3dvmrpInterfaceMetric
The distance metric for this interface which is used to calculate distance vectors.
swL3dvmrpInterfaceProbe
the period of sending probe
swL3dvmrpInterfaceNbrTimeout
the timer when neighbor expired.
swL3dvmrpInterfaceStatus
The status of this entry. Creating the entry enables DVMRP on the virtual interface; destroying the entry or setting it to notInService disables DVMRP on the virtual interface.
swL3dvmrpInterfaceRcvBadPkts
The number of DVMRP packets received on the interface by the DVMRP process which were subsequently discarded as invalid (e.g. invalid packet format, or a route report from an unknown neighbor).
swL3dvmrpInterfaceRcvBadRoutes
The number of routes, in valid DVMRP packets, which were ignored because the entry was invalid.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list