ctron-dlsw-mib

ctron-dlsw-mib Download

MIBs list

You can select a variable to monitor using the built-in IPHost MIB browser that provides you with all variables, their current values and descriptions taken from the ctron-dlsw-mib .

OID list for ctron-dlsw-mib

ctdlswVersion
Indicates the current revision level of the DLSw firmware in textual format.
ctdlswAdminStatus
Sets the system-wide administrative state of DLSw services.
ctdlswOperStatus
Indicates the current system-wide status of DLSw services.
ctdlswUpTime
Indicates the time (in hundredths of a second) since the DLSw services portion of the system was enabled.
ctdlswOperVirtualRingNumber
Specifies the operational ring/segment number that uniquely identifies the virtual segment to which this DLSw is connected. This object may only be modified when ctdlswOperStatus is disabled.
ctdlswNBLocalFilterType
Specifies the type of filtering to be applied to NetBIOS frames received on a local LAN segment. If set to block(1), any frame matching any entry in ctdlswNBLocalFilterTable will not be forwarded. If set to pass(2), only frames matching any entry in ctdls ...
ctdlswNBRemoteFilterType
Specifies the type of filtering to be applied to NetBIOS frames received from a remote DLSw partner. If set to block(1), any frame matching any entry in ctdlswNBRemoteFilterTable will not be forwarded. If set to pass(2), only frames matching any entry in ...
ctdlswMacLocalFilterType
Specifies the type of address filtering to be applied to SNA MAC frames received on a local LAN segment. If set to block(1), any frame matching any entry in ctdlswMacLocalFilterTable will not be forwarded. If set to pass(2), only frames matching any entry ...
ctdlswMacRemoteFilterType
Specifies the type of address filtering to be applied to SNA MAC frames received from a remote DLSw partner. If set to block(1), any frame matching any entry in ctdlswMacRemoteFilterTable will not be forwarded. If set to pass(2), only frames matching any ...
ctdlswAcceptDynamicTConn
Specifies whether this DLSw allows unconfigured DLSw partners to establish transport connections. Yes(1) means unconfigured DLSw partners may establish transport connections with this DLSw. No(2) means only user configured DLSw partners may establish tr ...
ctdlswDefaultPortNumber
Specifies the index of the port whose associated IP address will be used to identify this DLSw node to its DLSw partners. The value must be consistent with 'ifIndex' of mib-II.
ctdlswPortTable
This table contains an entry for each port, and specifies configuration parameters used to establish circuits over that port. This table is indexed by ctdlswPortName, which identifies the port for which an entry exists. These port configuration entries ...
ctdlswPortEntry
Each entry specifies configuration parameters for a port for which the entry exists.
ctdlswPortIndex
Specifies a unique value for each port. Values are derived from 'ifIndex' of mib-II.
ctdlswPortName
Specifies the user friendly name for this port.
ctdlswPortAddress
Specifies the MAC address of this port.
ctdlswPortAdminStatus
Sets the administrative state of DLSw frame forwarding for this port.
ctdlswPortOperStatus
Specifies the current operating status of DLSw frame forwarding for this port.
ctdlswPortUpTime
Indicates the time (in hundredths of a second) since this port was enabled. A value of zero means this port is not presently enabled.
ctdlswLocalNBFilterTable
A list of NETBIOS source-destination name pairs whose frames are allowed (or not allowed) to be forwarded via this DLSw. Only source-destination name pairs from locally generated NetBIOS frames are compared against entries in this table.
ctdlswLocalNBFilterEntry
Information for one NetBIOS source-destination name pair.
ctdlswLocalNBFilterSrcName
The source NETBIOS name to filter on.
ctdlswLocalNBFilterDestName
The destination NETBIOS NAME to filter on.
ctdlswLocalNBFilterControl
Set this object to delete(3) to remove this entry. Set to create(2) to add this entry. A get of this object will return other(1).
ctdlswRemoteNBFilterTable
A list of NETBIOS source-destination name pairs whose frames are allowed (or not allowed) to be forwarded via this DLSw. Only source-destination name pairs from NetBIOS frames received from remote DLSw partners are compared against entries in this table.
ctdlswRemoteNBFilterEntry
Information for one NetBIOS source-destination name pair.
ctdlswRemoteNBFilterSrcName
The source NETBIOS name to filter on.
ctdlswRemoteNBFilterDestName
The destination NETBIOS name to filter on.
ctdlswRemoteNBFilterControl
Set this object to delete(3) to remove this entry. Set to create(2) to add this entry. A get of this object will return other(1).
ctdlswLocalMacFilterTable
A list of source-destination MAC address pairs whose frames are allowed (or not allowed) to be forwarded via this DLSw. Only source-destination name pairs from locally generated SNA MAC frames are compared against entries in this table.
ctdlswLocalMacFilterEntry
Information for one source-destination MAC address pair.
ctdlswLocalMacFilterSrcAddr
The source MAC Address to filter on.
ctdlswLocalMacFilterSrcMask
The source MAC Address mask to filter on.
ctdlswLocalMacFilterDestAddr
The destination MAC Address to filter on.
ctdlswLocalMacFilterDestMask
The destination MAC Address mask to filter on.
ctdlswLocalMacFilterControl
Set this object to delete(3) to remove this entry. Set to create(2) to add this entry. A get of this object will return other(1).
ctdlswRemoteMacFilterTable
A list of source-destination MAC address pairs whose frames are allowed (or not allowed) to be forwarded via this DLSw. Only source-destination name pairs from SNA MAC frames received from remote DLSw partners are compared against entries in this table.
ctdlswRemoteMacFilterEntry
Information for one source-destination MAC address pair.
ctdlswRemoteMacFilterSrcAddr
The source MAC Address to filter on.
ctdlswRemoteMacFilterSrcMask
The source MAC Address mask to filter on.
ctdlswRemoteMacFilterDestAddr
The destination MAC Address to filter on.
ctdlswRemoteMacFilterDestMask
The destination MAC Address mask to filter on.
ctdlswRemoteMacFilterControl
Set this object to delete(3) to remove this entry. Set to create(2) to add this entry. A get of this object will return other(1).
ctdlswTConnTable
A list of transport connections which are either user defined or dynamically created for this DLSw.
ctdlswTConnEntry
ctdlswTConnRemoteTAddr
Specifies the remote transport address for this transport connection. It can be defined by the user, or established dynamically upon receiving a connection setup request from another DLSw.
ctdlswTConnControl
Set this object to delete(3) to remove this entry. Set to create(2) to add this entry. A get of this object will return other(1).
ctdlswTConnUpTime
Indicates the time (in hundredths of a second) since this transport connection was last established. A value of zero means this transport connection is not presently established.
ctdlswTConnOperStatus
Indicates the status of this transport connection.
ctdlswTConnType
Indicates the means by which this transport connection was determined. Configured(1) means this entry was user defined. Dynamic(2) means this entry was not user defined but was created as a result of a connection initiated by another DLSw.
ctdlswEventAdminStatus
Set the administrative state of Data Link Switching event logging. enabled(3) causes the event log to become active. disabled(2) causes the event log to become inactive.
ctdlswEventMaxEntries
Sets the maximum number of entries allowed in the event log table. When the number of entries reaches the value of ctdlswEventMaxEntries the first (oldest) entry is deleted to allow a new entry to be added.
ctdlswEventTraceAll
enabled(3) allows logging of all event types. disabled(2) causes the event log filter table to specify which events to log.
ctdlswEventFilterTable
This table contains descriptions of how to filter log entries.
ctdlswEventFilterEntry
Each entry specifies the filter for log entries. The instance ctdlswEventProtocol refers to the instance used in the nwRtgProtocolTable and nwComponentTable specified by the ctrouter-mib.txt.
ctdlswEventFltrProtocol
Selects the protocol to log events from.
ctdlswEventFltrIfNum
Specifies the port on which to log events.
ctdlswEventFltrControl
Setting this field to delete will allow entries to be removed from the table. This is done by adding new entries with instance fields that match the entry to be removed from the table. The new entry being added must have this control field set to delete ...
ctdlswEventFltrType
This bit field mask filter will allow only events of certain types to be logged. By default all types will be logged. Clearing event types from this field will cause those types not to be logged. Adding event types to this field will enable those types ...
ctdlswEventFltrSeverity
This filter controls the amount of logging by ignoring events of lower priority than that specified by the filter value. Specifying highest(1) causes all events except those of highest severity to be ignored. Specifying highmed(2) causes lowest severity e ...
ctdlswEventFltrAction
This field specifies how the events are to be logged. Specifying log(1) stores the events in the event log table (defined below). Specifying trap(2) sends events out through the trap mechanism. Specifying logTrap(3) does both.
ctdlswEventTable
This table contains all events that have been logged.
ctdlswEventEntry
Each entry specifies events that have been logged.
ctdlswEventNumber
The number uniquely identifies events.
ctdlswEventTime
This number specifies when the event was logged.
ctdlswEventType
Specifies type of event logged.
ctdlswEventSeverity
Specifies the severity of the event logged.
ctdlswEventProtocol
Specifies the protocol where the event occured.
ctdlswEventIfNum
Specifies the port the event occurred on.
ctdlswEventTextString
Specifies the actual text string to be logged.

You can start network devices monitoring using free 30-day trial version of IPHost Network Monitor right now. Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access. The IPHost's SNMP monitor can communicate and interact with any SNMP-enabled device.

MIBs list