ctron-q-bridge-mib-ext

ctron-q-bridge-mib-ext Download

MIBs list

You can select a variable to monitor using the built-in IPHost MIB browser that provides you with all variables, their current values and descriptions taken from the ctron-q-bridge-mib-ext .

OID list for ctron-q-bridge-mib-ext

ctQBridgePortGroup2
A collection of objects providing port level control over the ingress and egress of frames received by the device.
ctDot1qPortVlanExtTable
A table containing per port control and status information for Cabletron proprietary extensions pertaining to VLAN configuration in the device.
ctDot1qPortVlanEntry
Information controlling proprietary VLAN configuration for a port on the device. This is indexed by dot1dBasePort.
ctDot1qPortDefaultForwardMode
The method used to forward frames belonging to VLANs that do not have an entry in the dot1qVlanCurrentTable. When this is forwardNoFrames(1), the device will not forward traffic out this port, for any VLAN that does not have an entry in the dot1qVlanCurre ...
ctDot1qPortDiscardTagged
The method used to discard all incoming VLAN tagged frames for the port specified by the indexing of this entry. When this is enabled(1), the device will discard all 802.1Q tagged packets received on this port. When this is disabled(2), the device will NO ...
ctDot1qPortReplaceTCI
The method used to replace the Tag Control Information (TCI) field in all VLAN tagged frames received on the port specified by the indexing of this entry. When this is enabled(1), the device will replace the 802.1Q TCI field with results of the INGRESS st ...
ctDot1qVlanDynamicEgressTable
A table containing per VLAN control and status information for Cabletron proprietary egress extensions for VLAN configuration in the device.
ctDot1qVlanDynamicEgressEntry
Information controlling proprietary VLAN configuration for a device.
ctDot1qVlanDynamicEgressIndex
The VLAN to which this entries' dynamic egress status applies.
ctDot1qVlanDynamicEgressStatus
The state of Dynamic Egress operation on this VLAN. The value enabled(1) indicates that Dynamic Egress is enabled on this VLAN. If Dynamic Egress is enabled for a VLAN the following rules are applied to received frames: 1. If the frame is untagged, and ...
ctDot1qVlanCurrentExtTable
A table containing current configuration information for each VLAN currently configured into the device by (local or network) management or created dynamically created. This table provides proprietary extensions to dot1qVlanCurrentTable as defined in RFC2 ...
ctDot1qVlanCurrentEntryExt
Information for a VLAN configured into the device by (local or network) management or created dynamically.
ctDot1qVlanForbidEgressPorts
The current set of ports which are prohibited from being included in the egress list for this VLAN. This object is a logical combination of dot1qVlanForbiddenEgressPorts and zero or more proprietary methods of forbidding egress on a per port per VLAN bas ...
ctDot1qPortVlanEgressTable
A table containing per port, per VLAN egress information. This table represents information contained in the dot1qVlanCurrentTable, but indexed by port instead of by VLAN. Only ports that a given VLAN is actively egressing are represented in this table.
ctDot1qPortVlanEgressEntry
Information related to egress on a per port, per VLAN basis. The entry also represents the method that caused the port to have egress.
ctDot1qPortVlanEgressStatus
This object indicates the method that is causing the VLAN to egress on this port. other(1) - The VLAN is currently egressing on this port but the conditions under which it will remain so differ from the following values. static(2) - The VLAN is currently ...
ctDot1qPortVlanEgressType
This object indicates the type of egress the VLAN has on this port. tagged(1) - Frames for the specified VLAN egressing this port have an 802.1Q tag. untagged(2) - Frames for the specified VLAN egressing this port do not have an 802.1Q tag. forbidden(3) - ...
ctDot1qTpFdbExtTable
A table that extends the functionality provided by the dot1qTpFdbTable of Q-BRIDGE-MIB. Only unicast MAC addresses with a dot1qTpFdbStatus of learned(3) will appear in this table.
ctDot1qTpFdbExtEntry
Information about a specific unicast MAC address for which the device has some forwarding and/or filtering information.
ctDot1qTpFdbRemoveAddress
When this is object is set to true(1) the unicast MAC address specified by the indexing will be removed from transparent filter database. A set to false(2) will have no effect. This object will always return false(2).
ctQBridgePortGroup
********* THIS GROUP IS DEPRECATED ********** A collection of objects providing port level control over the forwarding behavior of frames classified to unconfigured VLANs.
ctQBridgeVlanGroup
A collection of objects providing device level control over the addition and deletion of unconfigured ports to the egress lists of VLANs.
ctQBridgeVlanCurrentForbidGroup
A collection of objects providing read-only current operational information pertaining to forbidden egress on a per VLAN basis.
ctQBridgePortReplaceTCIGroup
An object providing port level control TCI replacement.
ctQBridgePortVlanEgressGroup
Objects providing per port, per VLAN egress information.
ctQBridgeTpFdbTableExtGroup
Objects providing per 802.1Q unicast MAC address configuration.

You can start network devices monitoring using free 30-day trial version of IPHost Network Monitor right now. Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access. The IPHost's SNMP monitor can communicate and interact with any SNMP-enabled device.

MIBs list