enterasys-ospf-ext-mib Download

etsysOspfExtOperStatus

The current operational state of the OSPF Protocol. Changing the state of the ospfAdminStat object effects the state of this object. If ospfAdminStat is set to 'disabled', this object's status is changed to 'operStatusGoingDown'. Once all of the resourc ...

etsysOspfExtCalcMaxDelay

The maximum delay before the Routing Table is recalculated following a change to the Link State Database. (Recalculation is delayed to reduce the frequency of recalculations of the Routing Table). This parameter has units of milliseconds. A value of 0 i ...

etsysOspfExtCalcThrshUpdStart

This parameter can be used to override the etsysOspfExtCalcMaxDelay when the number of updates to the Link State Database reaches a threshold value. -1 Indicates that this threshold is infinite, and hence the timing of a routing calculation is determined ...

etsysOspfExtCalcThrshUpdRestart

This parameter can be used to interrupt a full routing calculation when the number of pending updates to the Link State Database has reached a threshold value. -1 Indicates that this threshold is infinite, and hence no number of pending updates to the da ...

etsysOspfExtCalcThrshIncUpdates

This parameter can be used to optimize the performance of the Routing Calculator in the situation where updates that are pending to the Link State Database solely concern inter-area or AS-external routes. In this case, the Routing Table can be updated ei ...

etsysOspfExtCalcThrshIncSpfUpd

This parameter can be used to optimize the performance of the Routing Calculator in the situation where updates that are pending to the Link State Database concern intra-area routes. In this case, the Routing Table can be updated either by one full recalc ...

etsysOspfExtCalcPauseFreq

This value determines how regularly a Routing Calculation is paused. It is measured in points. The points scale roughly maps to a time scale, so that the larger this value is, the longer the Routing Calculation runs before pausing. -1 Indicates that the ...

etsysOspfExtRteMaxEqCostPaths

The maximum number of equal cost paths that are stored for each destination in the Routing Table.

etsysOspfExtCheckAge

This value determines how often the checksums of LSAs in the Link State Database are checked. If 0, no checksums in the database are checked.

etsysOspfExtExtLsaRfshIntvl

Self-originated LSAs are periodically reflooded into the routing domain to add to the robustness of the OSPF protocol. This value determines the interval between refreshes of type-5 and type-11 AS-external LSAs, and is defaulted to the OSPF standard defau ...

etsysOspfExtExternOpLsaCount

The number of type-11 LSAs in the external database.

etsysOspfExtExternOpLsaCksumSum

The 32 bit sum of LS checksums of all type-11 LSAs in the external Link State Database.

etsysOspfExtNumUpdPending

The number of updates that are pending addition to the Link State Database.

etsysOspfExtNumUpdMerged

The number of updates that have been merged into the Link State Database since the last routing calculation.

etsysOspfExtNumCksumsPending

The number of LSAs in the Link State Database which are now due to have their checksum checked.

etsysOspfExtDoGraceHitless

Indicates whether OSPF should perform hitless restart using grace LSAs. If OSPF is being deactivated, grace LSAs are sent out to inform neighboring routers that we wish to undergo a hitless restart. If OSPF is being activated, we will attempt to restart ...

etsysOspfExtDoGraceUnplannedHitless

Indicates whether OSPF should perform an unplanned hitless restart using grace LSAs. Note that etsysOspfExtDoGraceHitless has a higher priority than this object. Therefore if both etsysOspfExtDoGraceHitless and this object are both set to 'true' on acti ...

etsysOspfExtHitlessGracePeriod

If OSPF is attempting to undergo a hitless restart, this field specifies the length of grace period that should be requested from adjacent routers in grace LSAs. After this timer period has passed, an RTM will delete routes from this RPM from its routing ...

etsysOspfExtAreaTable

This table provides additional information pertaining to OSPF Areas for Enterasys OSPF systems.

etsysOspfExtAreaEntry

An entry (conceptual row) in the etsysOspfExtAreaTable.

etsysOspfExtAreaAdminStatus

The desired administrative state of this OSPF area. When the status of this object is set to 'disabled', no flooding will occur for routes in this area and all routes for this area are removed from the RIB. When the status of this object is set to 'enable ...

etsysOspfExtAreaOperStatus

The current operational state of this OSPF area.

etsysOspfExtAreaTransitCapability

This parameter indicates whether the area can carry data traffic that neither originates nor terminates in the area itself. This parameter is calculated when the area's shortest-path tree is built.

etsysOspfExtAreaLsaRfshIntvl

Self-originated LSAs are periodically reflooded into the routing domain, to add to the robustness of the OSPF protocol. This value determines the interval between refreshes of LSAs in this area, and is defaulted to the OSPF standard default of 1800 second ...

etsysOspfExtAreaRtrLsaCount

The number of LSAs with LS type-1 in this area's Link State Database.

etsysOspfExtAreaRtrLsaCksumSum

The 32 bit sum of LS checksums of all LSAs with LS type-1 in this area's Link State Database.

etsysOspfExtAreaNetLsaCount

The number of LSAs with LS type-2 in this area's Link State Database.

etsysOspfExtAreaNetLsaCksumSum

The 32 bit sum of LS checksums of all LSAs with LS type-2 in this area's Link State Database.

etsysOspfExtAreaSummLsaCount

The number of LSAs with LS type-3 in this area's Link State Database.

etsysOspfExtAreaSummLsaCksumSum

The 32 bit sum of LS checksums of all LSAs with LS type-3 in this area's Link State Database.

etsysOspfExtAreaSummAsLsaCount

The number of LSAs with LS type-4 in this area's Link State Database.

etsysOspfExtAreaSummAsLsaCksumSum

The 32 bit sum of LS checksums of all LSAs with LS type-4 in this area's Link State Database.

etsysOspfExtAreaNssaLsaCount

The number of LSAs with LS type-7 in this area's Link State Database.

etsysOspfExtAreaNssaLsaCksumSum

The 32 bit sum of LS checksums of all LSAs with LS type-7 in this area's Link State Database.

etsysOspfExtAreaOpLsaCount

The number of LSAs with LS type-10 in this area's Link State Database.

etsysOspfExtAreaOpLsaCksumSum

The 32 bit sum of LS checksums of all LSAs with LS type-10 in this area's Link State Database.

etsysOspfExtIfTable

This table provides additional information pertaining to OSPF Interfaces for Enterasys OSPF systems.

etsysOspfExtIfEntry

An entry (conceptual row) in the etsysOspfExtIfTable.

etsysOspfExtIfOperStatus

The current operational state of OSPF on this interface.

etsysOspfExtIfNetMask

The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.

etsysOspfExtIfTransmitTimerDelay

The time this interface will delay a LSU packet, in order to add more LSAs to the packet before sending. Setting this correctly can reduce the network traffic. This is configurable on a per-interface basis.

etsysOspfExtIfIPMaxPacketSize

Maximum transfer unit (MTU) for the network interface. This is the maximum packet size in bytes for packets sent over the network interface. This size excludes link layer headers but includes IP headers and higher-level headers. Normally, OSPF limits sen ...

etsysOspfExtIfPassive

Indicates whether this interface is a passive interface. If set to 'true', we suppress HELLO packets sent on and received from this interface. We will therefore advertise this interface in our LSAs but not run the OSPF protocol over it.

etsysOspfExtIfLsaRefreshIntvl

Self-originated LSAs are periodically reflooded into the routing domain, to add to the robustness of the OSPF protocol. This value determines the interval between refreshes of LSAs that are only flooded over this interface (type-9 opaque LSAs) and is defa ...

etsysOspfExtIfHelperModePolicy

Indicates whether OSPF will help a neighbor undergoing hitless restart on this interface for the specified reason. This field contains a bit flag for each of OspfHitlessRestartReasons. If a bit flag for a specific restart reason is set, then OSPF will hel ...

etsysOspfExtIfMaxHitlessGracePeriod

If configured to help neighbors undergoing hitless restart on this interface, this field indicates the maximum grace period that will be allowed for a neighboring router undergoing hitless restart. If a type-9 grace LSA is received with a greater request ...

etsysOspfExtIfAuthUserData

Authentication user data for interface level authentication. This data is passed opaquely to the authentication process, where it can be used to assist with authentication decisions. When read, etsysOspfExtIfAuthUserData always returns an Octet String of ...

etsysOspfExtIfFastHelloMultiplier

The number of Hellos that should be sent within 1 second when using Fast Hellos on this interface. This value does not have to be same for all routers attached to a common network, but it is advisable. Fast Hellos are configured using ospfIfRtrDeadInter ...

etsysOspfExtIfAutoDeleteNbr

Whether dynamically created entries in the ospfNbrTable should be kept when the adjacency goes down. If this object is set to 'false', then a dynamically created entry in the ospfNbrTable will remain with state 'down' when the adjacency is lost. Such ent ...

etsysOspfExtIfMtuIgnore

This object controls whether OSPF checks the MTU size on incoming Database Description packets. By default, if the received MTU size in a DB Description packet is higher than the MTU size configured on the incoming interface, the OSPF adjacency will not ...

etsysOspfExtVirtIfTable

This table provides additional information pertaining to OSPF Virtual Interfaces for Enterasys OSPF systems.

etsysOspfExtVirtIfEntry

An entry (conceptual row) in the etsysOspfExtVirtIfTable.

etsysOspfExtVirtIfAdminStatus

The desired administrative state of this virtual interface. When the status of this object is set to 'disabled', the virtual link is torn down and no routing information is exchanged with its peer. When the status of this object is set to 'enabled', the v ...

etsysOspfExtVirtIfOperStatus

The current operational state of OSPF on this virtual interface.

etsysOspfExtVirtIfTransmitTimerDelay

The time this interface will delay a LSU packet, in order to add more LSAs to the packet before sending. Setting this correctly can reduce the network traffic. This is configurable on a per-interface basis.

etsysOspfExtVirtIfIPMaxPacketSize

Maximum transfer unit (MTU) for the network interface. This is the maximum packet size in bytes for packets sent over the network interface. This size excludes link layer headers but includes IP headers and higher-level headers. Normally, OSPF limits sen ...

etsysOspfExtVirtIfPassive

Indicates whether this interface is a passive interface. If set to 'true', we suppress HELLO packets sent on and received from this interface. We will therefore advertise this interface in our LSAs but not run the OSPF protocol over it.

etsysOspfExtVirtIfLsaRefreshIntvl

Self-originated LSAs are periodically reflooded into the routing domain, to add to the robustness of the OSPF protocol. This value determines the interval between refreshes of LSAs that are only flooded over this interface (type-9 opaque LSAs) and is defa ...

etsysOspfExtVirtIfHelperModePolicy

Indicates whether OSPF will help a neighbor undergoing hitless restart on this interface for the specified reason. This field contains a bit flag for each of OspfHitlessRestartReasons. If a bit flag for a specific restart reason is set, then OSPF will hel ...

etsysOspfExtVirtIfMaxHtlssGracePeriod

If configured to help neighbors undergoing hitless restart on this interface, this field indicates the maximum grace period that will be allowed for a neighboring router undergoing hitless restart. If a type-9 grace LSA is received with a greater reques ...

etsysOspfExtVirtIfFastHelloMultiplier

The number of Hellos that should be sent within 1 second when using Fast Hellos on this interface. This value does not have to be same for all routers attached to a common network, but it is advisable. Fast Hellos are configured using ospfVirtIfRtrDeadI ...

etsysOspfExtVirtIfMtuIgnore

This object controls whether OSPF checks the MTU size on incoming Database Description packets. By default, if the received MTU size in a DB Description packet is higher than the MTU size configured on the incoming interface, the OSPF adjacency will not ...

etsysOspfExtNbrTable

This table provides additional information pertaining to OSPF Neighbors for Enterasys OSPF systems.

etsysOspfExtNbrEntry

An entry (conceptual row) in the etsysOspfExtNbrTable.

etsysOspfExtNbrAdminStatus

The desired administrative state of this neighbor. When the status of this object is set to 'disabled', the connection to the neighbor is torn down and the routes learned from this neighbor are removed from the RIB. When the status of this object is set t ...

etsysOspfExtNbrOperStatus

The current operational state of this neighbor.

etsysOspfExtNbrNumRequests

The number of LSAs requested from this neighbor for which we are awaiting for a response. This field is incremented when an LSA is requested by sending a LS request packet and is decremented when the LSA arrives in a LS update packet.

etsysOspfExtNbrIfIpAddr

The IP address of the interface used for this neighbor. If this value is set to zero OSPF will choose a suitable interface to use. If this value is non-zero this neighbor will only be associated with an exactly matching interface. Note this field is onl ...

etsysOspfExtNbrDeadTime

The time remaining in seconds within which we need to receive a hello packet from the neighbor or we declare the adjacency down. If fast hellos area in use, this value is always set to 1. If the etsysOspfExtNbrOperStatus is down or ospfNbrState is DOWN, ...

etsysOspfExtNbrAreaId

The area to which the neighbor belongs. If the etsysOspfExtNbrOperStatus is down, then this value is set to zero and the field is not valid.

etsysOspfExtVirtNbrTable

This table provides additional information pertaining to OSPF Virtual Neighbors for Enterasys OSPF systems.

etsysOspfExtVirtNbrEntry

An entry (conceptual row) in the etsysOspfExtVirtNbrTable.

etsysOspfExtVirtNbrNumRequests

The number of LSAs requested from this neighbor for which we are awaiting for a response. This field is incremented when an LSA is requested by sending a LS request packet and is decremented when the LSA arrives in an LS update packet.

etsysOspfExtVirtNbrDeadTime

The time remaining in seconds within which we need to receive a hello packet from the neighbor or we declare the adjacency down. If fast hellos area in use, this value is always set to 1.

etsysOspfExtLocalLsdbTable

This table provides additional information pertaining to OSPF Local LS Database for Enterasys OSPF systems.

etsysOspfExtLocalLsdbEntry

An entry (conceptual row) in the etsysOspfExtLocalLsdbTable.

etsysOspfExtLocalLsdbAreaId

The OSPF area in which the link belongs.

etsysOspfExtGlobalGroup

This group defines global controls for Enterasys OSPF systems.

etsysOspfExtAreaGroup

This group defines the additional OSPF Area objects supported in the Enterasys OSPF systems.

etsysOspfExtIfGroup

This group defines the additional OSPF Interface objects supported in the Enterasys OSPF systems.

etsysOspfExtVirtIfGroup

This group defines the additional OSPF Virtual Interface objects supported in the Enterasys OSPF systems.

etsysOspfExtNbrGroup

This group defines the additional OSPF Neighbor objects supported in the Enterasys OSPF systems.

etsysOspfExtVirtNbrGroup

This group defines the additional OSPF Virtual Neighbor objects supported in the Enterasys OSPF systems.

etsysOspfExtLocalLsdbGroup

This group defines the additional OSPF Virtual Neighbor objects supported in the Enterasys OSPF systems.