hpprocurve-hpvgrptr

hpprocurve-hpvgrptr Download

MIBs list

HP-ICF-VG-RPTR

IPHost Network Monitor offer an easy way of SNMP monitoring your Hewlett Packard network devices.

OID list for hpprocurve-hpvgrptr

hpVgEntityName
The local name of this 100BaseVG repeater. This is the same value as hpicfEntityName in the case where there is Distributed Management Protocol to access this device. For SNMPv1, this name is appended to the agent community name to obtain a community nam ...
hpVgRedundantUpLinksFlag
This object is used to indicate that the hub is configured with redundant uplink ports.
hpVgXcvrTable
A table containing information about transceivers. All uplink, downlink, and redundent links are represented in this table
hpVgXcvrEntry
An entry in the transceiver table
hpVgXcvrGroupIndex
The group within the repeater for which this entry contains information. This object has the same value as the corresponding instance of icfVgGroupIndex.
hpVgXcvrIndex
The transceiver within the group for which this entry contains information.
hpVgXcvrType
The type of physical media supported by this transceiver. One of the following values: other undefined unknown true state not known pmdMissing PMD device not attached utp4 4-pair unshielded twisted pair stp2 2-pair shielded twist ...
hpVgXcvrAssociatedPort
The port within the group that this transceiver is associated with. There may be multiple transceivers associated with a single port. Also, a transceiver may be moved between ports.
hpVgXcvrState
This object is set to 'unknown' if the transceiver is not present or its status cannot be determined. 'inUse' indicates that the transceiver is currently selected for use by its associated port. 'standby' indicates the associated port is using another tr ...
hpVgXcvrAbandonments
The total number of times the corresponding instance of the hpVgXcvrState object has entered the 'abandoned' state. For downlink ports this object will have the value 0.
hpVgXcvrIsMovable
A true value indicates that the transceiver can be associated with a single port from a set of multiple ports. A false value indicates that a transceiver can only be associated with a single, fixed, port
hpVgNullAddrTraining
This object is used to control whether the repeater will allow completion of training by end-nodes using null MAC addresses. The 802.12 standard is written to disallow such training. However, some end-nodes may use this configuration at power-up before ...
hpVgBasicGroupTable
HP specific extensions to the vgBasicGroupTable.
hpVgBasicGroupEntry
An entry in the table, containing HP extensions for a specific group.
hpVgGrpGroupIndex
The group within the repeater for which this entry contains information. This object has the same value as the corresponding instance of icfVgGroupIndex.
hpVgGrpPortsAdminStatus
The hpVgGrpPortsAdminStatus is a bit map of the state of the icfVgPortAdminStatus object for all of the ports in this group. The object has a one bit for each port for which the value of icfVgPortAdminStatus is equal to 'enabled(1)' and a zero bit for e ...
hpVgGrpPortsTrained
The hpVgGrpPortsTrained is a bit map which indicates which ports in this group are currently online. The object has a one bit for each port for which meets the following conditions: 1. The value of the corresponding instance of the ifVgPortAdminStatus o ...
hpVgGrpPortsInTraining
The hpVgGrpPortsInTraining is a bit map which indicates which ports in this group are currently in the training state. The object has a one bit for each port which meets the following conditions: 1. The value of the corresponding instance of the ifVgPort ...
hpVgGrpPortsCascaded
The hpVgGrpPortsCascaded is a bit map which indicates which ports in this group have trained as cascaded repeater ports. The object has a one bit for each port which meets the following conditions: 1. The value of the corresponding instance of the ifVgPo ...
hpVgGrpPortsPromiscuous
The hpVgGrpPortsPromiscuous is a bit map which indicates which ports in this group have trained for promiscuous operation. The object has a one bit for each port which meets the following conditions: 1. The value of the corresponding instance of the ifVg ...
hpVgBasicPortTable
HP specific extensions to the vg port table.
hpVgBasicPortEntry
HP extended information about a specific vg port.
hpVgPortGroupIndex
The group that contains the port for which this entry contains information.
hpVgPortIndex
The port within the group for which this entry contains information.
hpVgPortPolarityReversed
This object is used to indicate that the hub port was wired with the positive/negative polarity of its wire pairs reversed. Note that the port will continue to operate in this state, with the hub inverting the polarity internally.
hpVgPortWireSkewError
This object is used to indicate that a wire skew error has been detected on this port.
hpVgPortAssociatedXcvrIndex
This object is the index into the transceiver table, hpVgXcvrTable. The transceiver entry defines which transceiver is connected to the port. This object will be set to 0 if the port is not currently associated with a transceiver
hpVgPortNumAssociatedXcvrs
This object is the number of transceivers that are currently associated with this port via the hpVgXcvrTable.
hpVgMonGlbReadableFrames
This object is the total number of good frames of valid frame length that have been received on all ports in this repeater. This counter is the summation of the values of the icfVgPortReadableFrames counter for all of the ports in this repeater.
hpVgMonGlbReadableOctets
This object is a count of the total number of octets contained in good frames that have been received on all ports in this repeater. This counter is the summation of the values of the icfVgPortReadableOctets counter for all of the ports in this repeater. ...
hpVgMonGlbUnreadableOctets
This object is a count of the total number of octets contained in invalid frames that have been received on all ports in this repeater. This counter is the summation of the values of icfVgPortUnreadableOctets counter for all of the ports in this repeater ...
hpVgMonGlbHighPriorityFrames
This object is a count of the total number of high priority frames that have been received on all ports in this repeater. This counter is a summation of the values of the icfVgPortHighPriorityFrames counter for all of the ports in this repeater.
hpVgMonGlbHighPriorityOctets
This object is a count of the total number of octets contained in high priority frames that have been received on all ports of this repeater. This counter is a summation of the values of the icfVgPortHighPriorityOctets counter for all of the ports in thi ...
hpVgMonGlbBroadcastFrames
This object is a count of the total number of broadcast packets that have been received on all ports in this repeater. This counter is a summation of the values of the icfVgPortBroadcastFrames counter for all of the ports in this repeater.
hpVgMonGlbMulticastFrames
This object is a count of the total number of multicast packets that have been received on all ports in this repeater. This counter is a summation of the values of the icfVgPortMulticastFrames counter for all of the ports in this repeater.
hpVgMonGlbIPMFrames
This object is a count of the total number of frames that have been received on all ports in this repeater with an invalid packet marker. This counter is a summation of the values of the icfVgPortIPMFrames counter for all of the ports in this repeater.
hpVgMonGlbDataErrorFrames
This object is a count of the total number of errored frames received on all ports in this repeater. This counter is a summation of the values of the icfVgPortDataErrorFrames counter for all of the ports in this repeater.
hpVgMonGlbPriorityPromotions
This object is a count of the total number of times the priority promotion timer has expired on any port in this repeater. This counter is a summation of the values of the icfVgPortPriorityPromotions counter for all of the ports in this repeater.
hpVgMonGlbNormPriorityFrames
This object is a count of the total number of normal priority frames received on all ports in this repeater. This counter is a summation of the values of the icfVgPortNormPriorityFrames counter for all of the ports in this repeater.
hpVgMonGlbNormPriorityOctets
This object is a count of the total number of normal priority octets received on all ports in this repeater. This counter is a summation of the values of the icfVgPortNormPriorityOctets counter for all of the ports in this repeater.
hpVgMonGlbNullAddressedFrames
This object is a count of the total number of null addressed packets that have been received on all ports. This counter is a summation of the values of the icfVgPortNullAddressedFrames counter for the ports in this repeater.
hpVgMonGlbOversizeFrames
This object is a count of the total number of oversized frames that have been received on all ports. This counter is a summation of the values of the icfVgPortOversizeFrames counter for the ports in this repeater.
hpVgMonGlbTransitionToTrainings
This object is a count of the total number of transitions to training on all ports. This counter is a summation of the values of the icfVgPortTransitionToTrainings counter for the ports in this repeater.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list