hpprocurve-v2-icfetwst

hpprocurve-v2-icfetwst Download

MIBs list

This MIB module describes devices in the HP Integrated Communication Facility product line.

IPHost Network Monitor offer an easy way of SNMP monitoring your Hewlett Packard network devices.

OID list for hpprocurve-v2-icfetwst

lastSetError
********* THIS OBJECT IS OBSOLETE ********* Provide more detailed, enterprise specific error type. Any error resulting from a SET request will cause this object to be updated, and the previous value overwritten. A management entity may retrieve more detai ...
password
********* THIS OBJECT IS OBSOLETE ********* This is the encrypted password for the device. The algorithm used for the encryption process is HP proprietary. Third party vendor support is provided by not setting a password on the device, and using the commu ...
reset
********* THIS OBJECT IS OBSOLETE ********* When the reset object is set to to 'warm' it results in a 'warm' reset, which does not clear the parameters in NOVRAM to factory defaults. When set to 'cold', it results in NOVRAM being set to factory defaults. ...
selfTest
********* THIS OBJECT IS OBSOLETE ********* Self test is invoked by setting this flag to 'stExecute. When the object changes to 'stSuccess', the test has completed successfully. Icf devices will 'hard-fail' if the test does not succeed.
semaphore
********* THIS OBJECT IS OBSOLETE ********* This object allows a set of objects to be locked. The lock is only assured by the 'cooperation' of other management entities; they must wait until the lock is cleared (to value zero) prior to setting the lock. W ...
pollResponse
********* THIS OBJECT IS OBSOLETE ********* Flag indicating whether device should respond to multicast SNMP PDUs. When set 'true', the device will respond to multicast SNMP PDU's. Otherwise, the response is discarded.
announceAddress
********* THIS OBJECT IS DEPRECATED ********* When set to any MAC address, the device will transmit three identical packets, each with the MAC source set to the device's MAC address, the MAC destination to the value of this object, the destination SAP is ...
mapAddress
********* THIS OBJECT IS DEPRECATED ********* When this object is set a map address search begins. If the address is detected on only one port, then the mapPort object is set to the port number on which the address was detected. This object is deprecated. ...
mapState
********* THIS OBJECT IS DEPRECATED ********* This object will be set to 'psNone' if the address set in the mapAddress object has not been received on any of the device's interface/ports. It will be set to 'psSingle' if the mapAddress has been detected on ...
mapPort
********* THIS OBJECT IS DEPRECATED ********* The port number on which the map address was detected. If map state is 'psNone' or 'psMany' then this object is not valid. This object is deprecated. This functionality has now been incorporated into the IETF ...
ipSubnetMask
********* THIS OBJECT IS OBSOLETE ********* This object is the IP subnet mask.
evtIpNotify
********* THIS OBJECT IS OBSOLETE ********* The network address of the manager node which is to receive the event notification trap.
evtIpxNotify
********* THIS OBJECT IS OBSOLETE ********* The IPX address of the manager node which is to receive the event notification trap.
evtTable
********* THIS OBJECT IS OBSOLETE ********* A list of event entries for event processing.
evtIndex
********* THIS OBJECT IS OBSOLETE ********* The index value which uniquely identifies the event to which this entry is applicable.
evtArm
********* THIS OBJECT IS OBSOLETE ********* This object arms and disarms events. Events are implicitly rearmed, that is, once an event occurs, it is rearmed. Sets to the intrusionEvent instance of this object are ignored, since intrusion events are actua ...
evtTimeSinceOccurrence
********* THIS OBJECT IS OBSOLETE ********* This object specifies the number of centiseconds since this event last occurred.
evtThresholdTable
********* THIS OBJECT IS OBSOLETE ********* A list of event entries for event processing.
evthIndex
********* THIS OBJECT IS OBSOLETE ********* The index value which uniquely identifies the event to which this entry is applicable.
evthArm
********* THIS OBJECT IS OBSOLETE ********* This object arms and disarms events. The notification node, the associated event object, threshold, hysteresis, and time interval should all be set before an event is armed. The objects do not need to be re-set ...
evthObject
********* THIS OBJECT IS OBSOLETE ********* The data of this object is itself an OBJECT IDENTIFIER which selects the mib object and instance that is to be monitored for the event. Only types INTEGER and Counter are allowed.
evthThreshold
********* THIS OBJECT IS OBSOLETE ********* The threshold against which the variable specified in evthObject is tested over the time interval specified in the evthTimeInterval When the threshold is met or exceeded, the event is triggered. The event will ...
evthHysteresis
********* THIS OBJECT IS OBSOLETE ********* The low value which the variable specified in evthObject must fall to or below after exceeding evthThreshold before the event can re-occur when the threshold is met or exceeded.
evthTimeInterval
********* THIS OBJECT IS OBSOLETE ********* The time interval over which the variable specified in the evthObject is sampled.
evthTimeSinceOccurrence
********* THIS OBJECT IS OBSOLETE ********* This object specifies the number of centiseconds since this event was last triggered.
linkTest802MacAddress
********* THIS OBJECT IS DEPRECATED ********* If this object is set to the MAC address of a node to link test in the same PDU that sets linkTestRepetitions to a nonzero value, the link test performed will use IEEE 802 Test frames. Note that setting more t ...
linkTestIpAddress
********* THIS OBJECT IS DEPRECATED ********* If this object is set to the network address of a node to link test in the same PDU that sets linkTestRepetitions to a nonzero value, the link test performed will use ICMP Echo packets. Note that setting more ...
linkTestIpxAddress
********* THIS OBJECT IS DEPRECATED ********* If this object is set to the IPX address of a node to link test in the same PDU that sets linkTestRepetitions to a nonzero value, the link test performed will use IPX diagnostic packets. Note that setting more ...
linkTestRepetitions
********* THIS OBJECT IS DEPRECATED ********* The number of link tests that the device is to complete. When this object is set to a non-zero value, the linkTestSuccess object is zeroed and the device begins a link test using IEEE 802.2 Test frames, ICMP ...
linkTestSuccess
********* THIS OBJECT IS DEPRECATED ********* For every successful link test, this counter is incremented. When link tests are completed, this counter contains the total number of successful tests. This object is now deprecated. Is functionality is bein ...
linkTestTimeout
********* THIS OBJECT IS DEPRECATED ********* The time interval over which a link test response must be received, or the test is counted as failed. This object is now deprecated. Is functionality is being replaced by the hpicfLinktest objects.
icf8023MacTable
********* THIS OBJECT IS OBSOLETE ********* A list of icf8023Mac entries.
icf8023MacIndex
********* THIS OBJECT IS OBSOLETE ********* The index value which uniquely identifies the port to which this entry is applicable. The port identified by a particular value of this index on a hub is the same port as identified by the same value of rptrPort ...
icf8023MacInBroadcastPkts
********* THIS OBJECT IS OBSOLETE ********* Count of the broadcast packets received.
icf8023MacOutBroadcastPkts
********* THIS OBJECT IS OBSOLETE ********* Count of the broadcast packets transmitted.
icf8023MacInMulticastPkts
********* THIS OBJECT IS OBSOLETE ********* Count of the multicast packets received.
icf8023MacOutMulticastPkts
********* THIS OBJECT IS OBSOLETE ********* Count of the multicast packets transmitted.
icf8023MacRunts
********* THIS OBJECT IS OBSOLETE ********* The number of media frames encountered that were too short (by ethernet/802.3 standards).
icf8023MacGiants
********* THIS OBJECT IS OBSOLETE ********* The number of media frames encountered that were too long (by ethernet/802.3 standards).
icf8023MacMissedPktErrors
********* THIS OBJECT IS OBSOLETE ********* The number of frames lost due to lack of resources (e.g. ring buffers, memory buffers, etc).
icf8023MacExcessDeferrals
********* THIS OBJECT IS OBSOLETE ********* The number of times a frame could not be sent due to excess deferrals because another node was transmitting continually.
icf8023MacTotalMediaErrors
********* THIS OBJECT IS OBSOLETE ********* Count of all possible medium transmit and receive errors, such as crc, alignment, sequence, length, excess etc. The purpose of this object is to support aggregate LAN medium errors for event processing. Collisio ...
icf8023MacSpuriousIntrs
********* THIS OBJECT IS OBSOLETE ********* The number of times that the network interface for this port generated a spurious hardware interrupt. A non-zero value for this object indicates a potential hardware problem.
icfDownloadIpAddress
********* THIS OBJECT IS OBSOLETE ********* The IP address of the TFTP server to download firmware from.
icfDownloadIpxAddress
********* THIS OBJECT IS OBSOLETE ********* The IPX address of the TFTP server to download firmware from.
icfDownloadFilename
********* THIS OBJECT IS OBSOLETE ********* Filename and path of file to download (maximum length of 63 characters + NULL).
hubThinlanFault
********* THIS OBJECT IS OBSOLETE ********* When set to 'true' this object causes the Fault LED to blink if the ThinLan Port is segmented.
hubGlobalErrors
********* THIS OBJECT IS OBSOLETE ********* This counter is incremented for each packet with an error received on any port. This counter does not include runts, as they are a normal media condition.
hubGlobalCollisions
********* THIS OBJECT IS OBSOLETE ********* This counter is incremented for each collision between any two or more ports (or AUI) detected by the hub.
hubGlobalPktFragments
********* THIS OBJECT IS OBSOLETE ********* This counter is the sum of hubPortPktFragments for all ports.
hubGlobalRunts
********* THIS OBJECT IS OBSOLETE ********* This counter is incremented for each runt frame received on any port.
hubGlobalGiants
********* THIS OBJECT IS OBSOLETE ********* This counter is incremented for each giant frame received on any port.
hubGlobalCrcErrors
********* THIS OBJECT IS OBSOLETE ********* This counter is incremented for each frame with a CRC error received on any port.
hubGlobalAlignmentErrors
********* THIS OBJECT IS OBSOLETE ********* This counter is incremented for each frame with an alignment error received on any port.
hubGlobalInOctets
********* THIS OBJECT IS OBSOLETE ********* This counter is incremented for each octet received on any port.
hubGlobalInUcastPkts
********* THIS OBJECT IS OBSOLETE ********* This counter is incremented for each unicast packet received on any port.
hubGlobalInNUcastPkts
********* THIS OBJECT IS OBSOLETE ********* This counter is incremented for each non-unicast packet received on any port.
hubGlobalInBroadcastPkts
********* THIS OBJECT IS OBSOLETE ********* This counter is incremented for each broadcast packet received on any port.
hubPortTable
********* THIS OBJECT IS OBSOLETE ********* A list of hubPort entries.
hubPortIndex
********* THIS OBJECT IS OBSOLETE ********* The index value which uniquely identifies the port to which this entry is applicable. The port identified by a particular value of this index is the same port as identified by the same value of rptrPortIndex.
hubPortPktFragments
********* THIS OBJECT IS OBSOLETE ********* This counter is incremented when a packet or packet fragment is encountered for a port instance.
hubPortCollisions
********* THIS OBJECT IS OBSOLETE ********* This counter is incremented when a port is involved in a collision.
hubPortSegmentation
********* THIS OBJECT IS OBSOLETE ********* This is a flag which is 'true' if the port is currently segmented and 'false' otherwise.
hubPortLinkBeatStatus
********* THIS OBJECT IS OBSOLETE ********* This is a flag which is 'true' if link beat is detected on the port and 'false' otherwise. The value of this variable will always be 'true' when the corresponding instance of hubPortLinkBeatEnable is 'false'.
hubPortLinkBeatEnable
********* THIS OBJECT IS OBSOLETE ********* When this flag is set to 'true' the port's link beat is enabled and when set to 'false' it is disabled.
hubPortMacAddress
********* THIS OBJECT IS OBSOLETE ********* Each port maintains the MAC address of the node currently attached to it. This address is valid only when the port state flag is set to 'psSingle'.
hubPortAddressState
********* THIS OBJECT IS OBSOLETE ********* The port state object may take on three values. 'psNone' means no packets have been received on the port. 'psSingle' means all packets received on the port have originated from a single MAC address. 'psMany' mea ...
hubPortPolarityReversed
********* THIS OBJECT IS OBSOLETE ********* This object is used to indicate that the hub port was wired with the positive/negative polarity of its transmit and receive pairs reversed. Note that the port will continue to operate in this state, with the hu ...
hubPortLateEventDisable
********* THIS OBJECT IS OBSOLETE ********* This object indicates that the hub port was disabled as a result of excessive late collisions being caused by the end node attached to this port. This flag is cleared when the port is reenabled by setting rptrP ...
hubPortsOperStatus
********* THIS OBJECT IS OBSOLETE ********* The hubPortsOperStatus is a bit map of the state of all hub ports. The object has a 1 bit for each port that is enabled, not segmented, and linkbeat is detected. Ports on which these conditions are not true ha ...
hubAddressTableMaxAge
********* THIS OBJECT IS OBSOLETE ********* The hubAddressTableMaxAge is the time beyond which an inactive MAC address will be removed from the hubPortMacAddress table and the hubAddressTable. Although hubAddressTableMaxAge is specified in units of 10ms ...
hubAddressTable
********* THIS OBJECT IS OBSOLETE ********* A list of entries present in the hub address table.
hubAddressIndex
********* THIS OBJECT IS OBSOLETE ********* The index value which uniquely identifies the chunk to which this entry is applicable.
hubAddressChunk
********* THIS OBJECT IS OBSOLETE ********* The hubAddressChunk object returns an opaque chunk of the address table. Each chunk can be interpreted as an array of records in the form: mac address [6 bytes], port number [2 bytes], inactivity time [4 bytes] ...
hubNumBkpLinks
********* THIS OBJECT IS OBSOLETE ********* The number of backup links configurable on this hub.
hubBkpLinkTable
********* THIS OBJECT IS OBSOLETE ********* A list of backup link configuration entries. For a given backup link, the hub will periodically send a test packet to the device at the end of the link. If there are no responses (the number is configurable), ...
hubBkpLinkIndex
********* THIS OBJECT IS OBSOLETE ********* The index value which uniquely identifies the backup link configuration entry to which the instance is applicable.
hubBackupPort
********* THIS OBJECT IS OBSOLETE ********* The port number of the backup link. Setting this object to zero removes the backup link configuration.
hubPrimaryPort
********* THIS OBJECT IS OBSOLETE ********* The port number of the primary link. It can only be set to zero if the hubBackupPort is also zero.
hubBackupAddress
********* THIS OBJECT IS OBSOLETE ********* The MAC address of the device at the other end of the primary link which will respond to the periodic test packets sent by this hub.
hubBackupTestTime
********* THIS OBJECT IS OBSOLETE ********* The frequency, in time ticks, between sending the periodic test packets. The actual resolution of this timer is in seconds. The test packet response timeout is fixed at 500ms.
hubBackupConsecutiveFails
********* THIS OBJECT IS OBSOLETE ********* The number of test packet failures which will cause the hub to switch to the backup link (i.e., backup port turned on, primary port turned off). A value of one is generally not recomended and will cause the back ...
hubSqeEnabled
********* THIS OBJECT IS OBSOLETE ********* When 'true', this flag indicates that SQE has been detected for the last ten agent transmits and there is a high probability that the SQE switch on the transceiver attached to the AUI port is set to Enabled, whe ...
hubAddressMoveLogTable
********* THIS OBJECT IS OBSOLETE ********* A log of the 20 most recent times that the agent detected that a source MAC address which had been heard on one port had moved to a different port.
hubAddressMoveLogEntry
********* THIS OBJECT IS OBSOLETE ********* A row in the hubAddressMoveLogTable containing information about a single address movement.
hubAddrMoveIndex
********* THIS OBJECT IS OBSOLETE ********* The index of this entry in the address movement log table. Index 1 will always contain the oldest entry. If the table is full when a new address movement occurs, the new entry becomes index 20, and all earlier ...
hubAddrMoveAddress
********* THIS OBJECT IS OBSOLETE ********* The MAC address of the station that moved to a new port.
hubAddrMoveOldGroup
********* THIS OBJECT IS OBSOLETE ********* The group containing the port on which this address had been operating before it moved.
hubAddrMoveOldPort
********* THIS OBJECT IS OBSOLETE ********* The port within the group on which this address had been operating before it moved.
hubAddrMoveNewGroup
********* THIS OBJECT IS OBSOLETE ********* The group containing the port that the address moved to.
hubAddrMoveNewPort
********* THIS OBJECT IS OBSOLETE ********* The port within the group that the address moved to.
hubLateEventMonitor
********* THIS OBJECT IS OBSOLETE ********* This object configures the late event monitoring functionality for the hub. This mode periodically samples the rptrMonitorPortLateEvents value for each port. If the agent detects excessive late events on a por ...
operationalState
********* THIS OBJECT IS OBSOLETE ********* This object controls the forwarding nature of the bridge. In the Learning state the bridge will learn new MAC addresses, and it ages out older MAC addresses. Statically configured addresses are discarded (they d ...
forwardDbMaxAge
********* THIS OBJECT IS OBSOLETE ********* The value of this object controls how long a MAC address stays in the forwarding database. See 802.1d, section 3.9.2 'Dynamic Entries'.
addressTable
********* THIS OBJECT IS OBSOLETE ********* A list of address entries.
addressIndex
********* THIS OBJECT IS OBSOLETE ********* The index value which uniquely identifies the chunk to which this entry is applicable.
addressChunk
********* THIS OBJECT IS OBSOLETE ********* This object returns an opaque chunk of the address table. The instance specifies a chunk of the address table. Each chunk can be interpreted as an array of 41 records of the form: { macAddress[6bytes], port nu ...
brgPortTable
********* THIS OBJECT IS OBSOLETE ********* A list of brgPort entries.
brgPortIndex
********* THIS OBJECT IS OBSOLETE ********* The index value which uniquely identifies the interface/port to which this entry is applicable. The interface/port identified by a particular value of this index is the same interface/port as identified by the s ...
brgPortCacheHits
********* THIS OBJECT IS OBSOLETE ********* Count of the successful cache matches when looking up a destination MAC address.
brgPortCacheMisses
********* THIS OBJECT IS OBSOLETE ********* Count of the unsuccessful cache matches when looking up a destination MAC address.
brgPortForwardedPkts
********* THIS OBJECT IS OBSOLETE ********* Count of the packets received on this port and forwarded to the other port.
brgPortFilteredPkts
********* THIS OBJECT IS OBSOLETE ********* Count of the frames that were received on this port and filtered.
wildcardTable
********* THIS OBJECT IS OBSOLETE ********* A list of wildcard entries.
wildcardIndex
********* THIS OBJECT IS OBSOLETE ********* The index value which uniquely identifies the interface/port to which this entry is applicable. The interface/port identified by a particular value of this index is the same interface/port as identified by the s ...
wildcardFilter
********* THIS OBJECT IS OBSOLETE ********* This object contains the binary value used to filter frames. The data in the frame at the offset specified by the Wildcard offsets is XOR'ed with this object after AND'ing with the Wildcard Mask. If zero result ...
wildcardMask
********* THIS OBJECT IS OBSOLETE ********* This object indicates which portion of the wildcardFilter is to be used in filtering. The data in the frame at the offset specified by Wildcard offsets is AND'ed with this object. The result is XOR'ed with the ...
wildcardOffset
********* THIS OBJECT IS OBSOLETE ********* Indicates the position in a received frame which is to have the Wildcard Mask/Filter applied. The indicated packet byte is aligned with the 0th byte of the wildcard mask/filter held in network byte order. The MA ...
wildcardUserOffset
********* THIS OBJECT IS OBSOLETE ********* This value is a byte offset from the beginning of the packet. If this offset is such that any portion of the filter extends past the end of the packet (for wildcard filtering purposes, the FCS is part of the pac ...
wildcardArm
********* THIS OBJECT IS OBSOLETE ********* This object arms (enables) the Wildcard Filter provided all of the other wildcard objects have been set to proper values. To disarm a wildcard, only the wildcardArm object need be set.
stpBridgeId
********* THIS OBJECT IS OBSOLETE ********* A 64 bit binary bridge id composed of bridge priority and the bridge's mac address fields. see: IEEE 802.1(d) 6.8.1.1.3(1), 4.5.3.7
stpTopoChangeTime
********* THIS OBJECT IS OBSOLETE ********* The time since the last topology change. see: IEEE 802.1(d) 6.8.1.1.3(2), 4.5.3.12
stpTopoNumChanges
********* THIS OBJECT IS OBSOLETE ********* The number of topo changes since initialization of STP. see: IEEE 802.1(d) 6.8.1.1.3(3)
stpTopoChange
********* THIS OBJECT IS OBSOLETE ********* A 1 bit flag broadcast by the root bridge indicating that a topology change is underway, and Stp bridges should use short term aging. see: IEEE 802.1(d) 6.8.1.1.3(4), 4.5.3.12
stpDesignatedRoot
********* THIS OBJECT IS OBSOLETE ********* The binary bridge id that this bridge believes to be the root bridge for the bridged Lan. see: IEEE 802.1(d) 6.8.1.1.3(5), 4.5.3.1
stpRootCost
********* THIS OBJECT IS OBSOLETE ********* The cost of the path to the root bridge from this bridge; equal to the sum of the designated cost and the path cost held for the root port. see: IEEE 802.1(d) 6.8.1.1.3(6), 4.5.3.2
stpRootPort
********* THIS OBJECT IS OBSOLETE ********* The port id that this bridge believes to be the root bridge's root port for the bridged Lan. see: IEEE 802.1(d) 6.8.1.1.3(7), 4.5.3.3
stpCurrentMaxAge
********* THIS OBJECT IS OBSOLETE ********* The Max Age value received from the Root Bridge (in seconds); the Stp is currently using the value. see: IEEE 802.1(d) 6.8.1.1.3(8), 4.5.3.4
stpCurrentHelloTime
********* THIS OBJECT IS OBSOLETE ********* The Hello time value received from the Root Bridge (in seconds); the Stp records the value. see: IEEE 802.1(d) 6.8.1.1.3(9), 4.5.3.5
stpCurrentForwardDelay
********* THIS OBJECT IS OBSOLETE ********* The forward delay value received from the Root Bridge (in seconds); the Stp is currently using the value. see: IEEE 802.1(d) 6.8.1.1.3(10), 4.5.3.6
stpMaxAge
********* THIS OBJECT IS OBSOLETE ********* The maximum age allowed of Config information for a port before a bridge will attempt to become the root (in seconds). Transmitted by this bridge when it is, or is attempting to become the root. see: IEEE 802.1 ...
stpHelloTime
********* THIS OBJECT IS OBSOLETE ********* The time between Config packet transmission when this bridge is, or is attempting to become the root (in seconds). Transmitted by this bridge when it is, or is attempting to become the root. see: IEEE 802.1(d) 6 ...
stpForwardDelay
********* THIS OBJECT IS OBSOLETE ********* The time spent in the Listening and Learning states used when this bridge is, or is attempting to become the root (in seconds). Transmitted by this bridge when it is, or is attempting to become the root. see: I ...
stpPriority
********* THIS OBJECT IS OBSOLETE ********* The upper 16 bits of the 64 bit BridgeId composed of priority and the bridge's mac address fields. see: IEEE 802.1(d) 6.8.1.2.2(4), 4.5.3.7
stpPortTable
********* THIS OBJECT IS OBSOLETE ********* A list of stpPort entries.
stpPortIndex
********* THIS OBJECT IS OBSOLETE ********* The index value which uniquely identifies the port to which this entry is applicable. The port identified by a particular value of this index is the same interface/port as identified by the same value of ifIndex ...
stpPortState
********* THIS OBJECT IS OBSOLETE ********* The state of a port on a 2 port bridge is really the state of the bridge itself. Management is only allowed to set this object to 'stpDisabled' or 'stpBlocking'. Setting the object to 'stpDisabled' will turn off ...
stpPortId
********* THIS OBJECT IS OBSOLETE ********* The 16 bit port id composed of priority and the port's unique id fields. see: IEEE 802.1(d) 6.8.2.1.3(3), 4.5.5.1
stpPortPathCost
********* THIS OBJECT IS OBSOLETE ********* The contribution of the path through this port, when the port is the root port, to the total cost of the path to the root for this bridge. see: IEEE 802.1(d) 6.8.2.1.3(4), 6.8.2.3.2(2), 4.5.5.3
stpPortRootId
********* THIS OBJECT IS OBSOLETE ********* The bridge id that this port believes to be the root bridge for the bridged Lan. see: IEEE 802.1(d) 6.8.2.1.3(5), 4.5.5.4
stpPortDesignatedCost
********* THIS OBJECT IS OBSOLETE ********* The cost of the path to the root offered by the Designated Port on the LAN to which this Port is attached. see: IEEE 802.1(d) 6.8.2.1.3(6), 4.5.5.5
stpPortDesignatedBridge
********* THIS OBJECT IS OBSOLETE ********* The Bridge Id of the designated bridge for the LAN associated with the port. see: IEEE 802.1(d) 6.8.2.1.3(7), 4.5.5.6
stpPortDesignatedPort
********* THIS OBJECT IS OBSOLETE ********* The port id of the bridge believed to be the designated port of the LAN associated with the port. see: IEEE 802.1(d) 6.8.2.1.3(8), 4.5.5.7
stpPortPriority
********* THIS OBJECT IS OBSOLETE ********* The upper 8 bits of the 16 bit PortId composed of priority and the port's unique id fields. see: IEEE 802.1(d) 6.8.2.3.2(3), 4.5.5.1
hdlcErrorTable
********* THIS OBJECT IS OBSOLETE ********* A list of hdlcError entries.
hdlcErrorIndex
********* THIS OBJECT IS OBSOLETE ********* The index value which uniquely identifies the port to which this entry is applicable. The port identified by a particular value of this index is the same interface/port as identified by the same value of ifIndex ...
hdlcErrorIndications
********* THIS OBJECT IS OBSOLETE ********* Errors occurring during information transfer which required instruction from CPU for recovery. This is a serious link problem. The local node will either reset or disconnect after receiving this message.
hdlcT1Timeouts
********* THIS OBJECT IS OBSOLETE ********* The number of times the retransmission timer (x25T1Timer) timed out.
hdlcMissedPackets
********* THIS OBJECT IS OBSOLETE ********* Count of the frames lost by the receiver because there wasn't a receive buffer.
hdlcRcvOverruns
********* THIS OBJECT IS OBSOLETE ********* Count of the number of times the reciever's FIFO was full when the receiver was ready to put new data into the FIFO.
hdlcXmtUnderruns
********* THIS OBJECT IS OBSOLETE ********* Count of the number of times the transmitter has aborted a frame transmission because data was late from memory.
hdlcProviderLostPrimitives
********* THIS OBJECT IS OBSOLETE ********* Count of the number of lost control frames due to 802.3 priority processing on receive.
hdlcRuntFrameReceives
********* THIS OBJECT IS OBSOLETE ********* Count of the HDLC frames received that were less than the minimum legal HDLC size.
hdlcGiantFrameReceives
********* THIS OBJECT IS OBSOLETE ********* Count of the HDLC frames received that were larger than the maximum legal size that can be sent on the 802.3 LAN link.
hdlcBadFrameReceives
********* THIS OBJECT IS OBSOLETE ********* Count of the sum of: HDLC frames with bad checksum, and misaligned HDLC frames.
hdlcRejectFrameReceives
********* THIS OBJECT IS OBSOLETE ********* Count of the HDLC reject frames received.
hdlcRejectFrameSends
********* THIS OBJECT IS OBSOLETE ********* Count of the HDLC reject frames sent.
hdlcFrameRejectFrameRecs
********* THIS OBJECT IS OBSOLETE ********* Count of the HDLC frame reject frames (FRMR) received.
hdlcLocalTable
********* THIS OBJECT IS OBSOLETE ********* A list of hdlcLocal entries.
hdlcLocalIndex
********* THIS OBJECT IS OBSOLETE ********* Index into Hdlc local statistics table on a per port basis. bridge.HP28674: There is only one 'real' instance of this object on port 2.
hdlcLocalResetRequests
********* THIS OBJECT IS OBSOLETE ********* Count of local HDLC requests to reset current logical link.
hdlcLocalResetConfirms
********* THIS OBJECT IS OBSOLETE ********* Count of local HDLC node link reset confirmations.
hdlcLocalConnectRequests
********* THIS OBJECT IS OBSOLETE ********* Count of local HDLC node attempts to establish logical link.
hdlcLocalConnectConfirms
********* THIS OBJECT IS OBSOLETE ********* Count of local HDLC node connect request acceptances.
hdlcLocalDisconnectRequests
********* THIS OBJECT IS OBSOLETE ********* Count of local HDLC node disconnect requests.
hdlcLocalDisconnectConfirms
********* THIS OBJECT IS OBSOLETE ********* Count of local HDLC node disconnects granted.
hdlcLocalState
********* THIS OBJECT IS OBSOLETE ********* Current local HDLC operational state.
hdlcLocalAddress
********* THIS OBJECT IS OBSOLETE ********* The local HDLC address during communication with the remote node. This object is valid only if a brouter is on the remote end of the HDLC link. It can only be set to one of the two values: 'hdlcDTEAddress' or ' ...
hdlcLocalPhase
********* THIS OBJECT IS OBSOLETE ********* Current HDLC operational phase.
hdlcRemoteTable
********* THIS OBJECT IS OBSOLETE ********* A list of hdlcRemote entries.
hdlcRemoteIndex
********* THIS OBJECT IS OBSOLETE ********* Index into Hdlc remote statistics table on a per port basis. bridge.HP28674: There is only one 'real' instance of this object on port 2.
hdlcRemoteResetRequests
********* THIS OBJECT IS OBSOLETE ********* Count of remote HDLC requests to reset current logical link.
hdlcRemoteResetConfirms
********* THIS OBJECT IS OBSOLETE ********* Count of remote HDLC node link reset confirmations.
hdlcRemoteConnectRequests
********* THIS OBJECT IS OBSOLETE ********* Count of remote HDLC node attempts to establish logical link.
hdlcRemoteConnectConfirms
********* THIS OBJECT IS OBSOLETE ********* Count of remote HDLC node connect request acceptances.
hdlcRemoteDisconnectRequests
********* THIS OBJECT IS OBSOLETE ********* Count of remote HDLC node disconnect requests.
hdlcRemoteState
********* THIS OBJECT IS OBSOLETE ********* Current remote HDLC operational state.
hdlcRemoteAddress
********* THIS OBJECT IS OBSOLETE ********* The remote HDLC address during communication with the local node. This object is valid only if a brouter is on the remote end of the HDLC link. It can only be set to one of the two values: 'hdlcDCEAddress' or ' ...
hdlcRemoteXidCommands
********* THIS OBJECT IS OBSOLETE ********* Count of XID commands issued by remote node.
hdlcRemoteXidResponses
********* THIS OBJECT IS OBSOLETE ********* Count of XID responses issued by remote node.
hdlcRemoteTestCommands
********* THIS OBJECT IS OBSOLETE ********* Count of Test commands issued by remote node.
hdlcRemoteTestResponses
********* THIS OBJECT IS OBSOLETE ********* Count of Test responses issued by remote node.
hdlcRemoteNodeId
********* THIS OBJECT IS OBSOLETE ********* Identification of the node at the opposite end of the HDLC link (eg. brouter or bridge). This object, along with hdlcLocalAddress and hdlcRemoteAddress, constitute a superobject. This object may only be set to ...
x25Table
********* THIS OBJECT IS OBSOLETE ********* A list of X25 entries.
x25Index
********* THIS OBJECT IS OBSOLETE ********* Index into X25 remote timer table on a per port basis. bridge.HP28674: There is only one 'real' instance of this object on port 2.
x25T1Timer
********* THIS OBJECT IS OBSOLETE ********* Period of time used to timeout retransmits for X25.
x25N2Count
********* THIS OBJECT IS OBSOLETE ********* Number of retries to be performed during X.25 communication.
x25T3Timer
********* THIS OBJECT IS OBSOLETE ********* Period of idle time before a disconnect is executed for X25.
icfConfigIfTable
********* THIS OBJECT IS DEPRECATED ********* This table contains per-interface configuration information that will take effect after the next reset of the device.
icfConfigIfEntry
********* THIS OBJECT IS DEPRECATED ********* An entry in the icfConfigIfTable containing information about a single interface.
icfConfigIfIndex
********* THIS OBJECT IS DEPRECATED ********* The index of the interface which this information contains configuration information for. The interface identified by a particular value of this index is the same interface identified by the same value of ifI ...
icfConfigIfIpAddress
********* THIS OBJECT IS DEPRECATED ********* This variable contains the IP address for this interface which will be used after the next reset of the device.
icfConfigIfNetMask
********* THIS OBJECT IS DEPRECATED ********* This variable contains the IP subnet mask for this interface which will be used after the next reset of the device.
icfConfigIfDefaultGate
********* THIS OBJECT IS DEPRECATED ********* This variable contains the IP address of the default router for this interface which will be used after the next reset of the device.
icfConfigIpTTL
********* THIS OBJECT IS DEPRECATED ********* This variable contains the default IP time to live which will be used after the next reset of the device.
icfConfigBootpEnable
********* THIS OBJECT IS DEPRECATED ********* Setting this flag to 'enabled' (the default) will clear any existing IP address configuration for this device, and will cause the device to use the Bootp protocol to obtain its IP configuration after the next ...
icfCommonBasicGroup
********* THIS GROUP IS OBSOLETE ********* A collection of obsolete objects thate were shared by EtherTwist hubs, EtherTwist bridges, and AdvanceStack 10BaseT hubs.
icfCommonIpGroup
********* THIS GROUP IS OBSOLETE ********* A collection of obsolete objects thate were shared by EtherTwist hubs, EtherTwist bridges, and AdvanceStack 10BaseT hubs that support IP.
icfCommonIpxGroup
********* THIS GROUP IS OBSOLETE ********* A collection of obsolete objects thate were shared by EtherTwist hubs, EtherTwist bridges, and AdvanceStack 10BaseT hubs that support IPX.
icfEncryptedPasswordGroup
********* THIS GROUP IS OBSOLETE ********* A collection of obsolete objects that were shared by EtherTwist hubs and EtherTwist bridges. Was not implemented on EtherTwist Hub/24S or on any AdvanceStack product.
icfMappingGroup
********* THIS GROUP IS DEPRECATED ********* A collection of objects for mapping MAC addresses to device ports.
icfIpMappingGroup
********* THIS GROUP IS DEPRECATED ********* A collection of objects for using IP-layer addresses in mapping operations.
icfIpxMappingGroup
********* THIS GROUP IS DEPRECATED ********* A collection of objects for using IPX-layer addresses in mapping operations.
icfSlaveMappingGroup
********* THIS GROUP IS DEPRECATED ********* A collection of objects for mapping MAC addresses to device ports on slave AdvanceStack devices.
icf8023MacGroup
********* THIS GROUP IS OBSOLETE ********* A collection of 802.3 specific statistics for device ports.
icf8023MacSlaveGroup
********* THIS GROUP IS OBSOLETE ********* A collection of 802.3 specific statistics for device ports. on slave AdvanceStack devices.
icfDownloadGroup
********* THIS GROUP IS OBSOLETE ********* A collection of objects for initiating a network download of device firmware on EtherTwist devices.
hubBasicGroup
********* THIS GROUP IS OBSOLETE ********* A collection of objects for managing ICF hubs.
hubBasicSlaveGroup
********* THIS GROUP IS OBSOLETE ********* A collection of objects for managing slave ICF hubs.
hubMappingGroup
********* THIS GROUP IS OBSOLETE ********* A collection of objects used for mapping MAC addresses to hub ports.
hubLinkBeatControlGroup
********* THIS GROUP IS OBSOLETE ********* A collection of objects for enabling or disabling the link beat detection function on hub ports.
hubBasicEnhancementsGroup
********* THIS GROUP IS OBSOLETE ********* A collection of objects adding simple enhancements to the basic hub management objects.
hubBasicAddrTableGroup
********* THIS GROUP IS OBSOLETE ********* A collection of objects for controlling the hub address table, even when the table itself is not readable.
hubReadableAddrTableGroup
********* THIS GROUP IS OBSOLETE ********* A collection of objects for accessing a MAC address to port number table on ICF hubs.
hubBackupLinkGroup
********* THIS GROUP IS OBSOLETE ********* A collection of objects for configuring backup links on ICF hubs.
hubNewEnhancementsGroup
********* THIS GROUP IS OBSOLETE ********* A collection of objects providing new enhancements to the basic hub management objects.
hubAddressMoveGroup
********* THIS GROUP IS OBSOLETE ********* A collection of objects for tracking station address movement between ports on a hub.
hubLateEventMonitorGroup
********* THIS GROUP IS OBSOLETE ********* A collection of objects to control the late event monitor function of ICF hubs.
icfBridgeBasicGroup
********* THIS GROUP IS OBSOLETE ********* A collection of objects for managing ICF bridges.
icfBridgeSpanningTreeGroup
********* THIS GROUP IS OBSOLETE ********* A collection of objects for managing the Spanning Tree Protocol on ICF bridges.
icfRemoteBridgeGroup
********* THIS GROUP IS OBSOLETE ********* A collection of objects for managing the remote link on ICF remote bridges.
icfConfigGroup
********* THIS GROUP IS DEPRECATED ********* A collection of objects for configuring the IP protocol stack in ICF agents.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list