-- ******************************************************************* -- CISCO-DOT11-HT-PHY-MIB.my: DOT11 HT PHY MIB -- July 2006, Prasanna Viswakumar -- -- Copyright (c) 2006-2007 by Cisco Systems, Inc. -- ******************************************************************* CISCO-DOT11-HT-PHY-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF TruthValue, TEXTUAL-CONVENTION FROM SNMPv2-TC ifIndex FROM IF-MIB ciscoMgmt FROM CISCO-SMI; ciscoDot11HtPhyMIB MODULE-IDENTITY LAST-UPDATED "200612110000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems, Customer Service Postal: 170 West Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS Email: cs-wnbu-snmp@cisco.com" DESCRIPTION "This MIB is intended to be implemented on Cisco's WLAN devices that provide the wired uplink to wireless clients through the high-throughput dot11 radios compliant to the 802.11n specification. The MIB describes the PHY layer parameters of the 802.11n compliant radio interfaces. GLOSSARY Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients. A-MPDU An aggregated format that consists of several MAC Protocol Data Units being aggregated and transmitted in one PHY Service Data Unit. A-MSDU An aggregated format that consists of several MAC Service Data Units being aggregated and transmitted in one MAC Protocol Data Unit. Block-Ack This refers to the acknowledgement done for all the MPDUs in an A-MDPU. Basic Service Set ( BSS ) The IEEE 802.11 BSS of an AP comprises of the stations directly associating with the AP. CSI Channel State Information Clear Channel Assessment ( CCA ) A technique to assess the availability of the channel for communication purposes. Dual CTS Clear-To-Send control frame is sent by the receiver in response to the Request-To-Send (RTS) control frame from the sender to virtually reserve the wireless medium for data transfer. Dual CTS mechanism is used by the AP to reserve the wireless medium for wireless devices that do not support STBC. Green Field A mode of operation where high-throughput 802.11n frames are transmitted without a legacy compatible part. Mobile Node ( MN ) A roaming 802.11 wireless device in a wireless network associated with an access point. Mobile Node and client are used interchangeably. Modulation and Coding Scheme ( MCS ) This is a value that determines the modulation, coding and number of spatial channels. Each scheme specifies the modulation technique, coding rate , number of spatial streams etc and the corresponding data rate. Multiple Input Multiple Output ( MIMO ) This technique advocates sending and receiving data communication signals through multiple antennas. MIMO uses the multiple streams to transmit more information and recombine the signal at the receiving end. This brings more reliability and significant gain over the traditional antenna systems. PLCP PHY Layer Convergence Protocol PMD Physical Medium Dependent Power Save Multi-Poll ( PSMP ) A MAC control frame that schedules the transmissions and receptions of PSMP devices. Phased Coexistence Operation ( PCO ) A BSS mode with alternating 20MHz and 40MHz phases of operation controlled by a PCO AP. PHY Protocol Data Unit ( PPDU ) Unit of data transfer at PHY level. Short-Guard Interval ( SG ) Space-Time Block Coding ( STBC ) By this technique, a wireless device transmits several copies of a data stream across a series of antennas so that the receiver can use the various received portions of the data signal to improve reliability of data transfer. Reduced Inter-Frame Space ( RIFS ) A time interval between multiple transmissions of a single transmitter used to reduce overhead and increase network efficiency. Zero Length Frame ( ZLF ) A PPDU carrying a PSDU of zero-length. REFERENCE [1] Part 11. Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications: Enhancements for Higher Throughput [2] Enhanced Wireless Consortium MAC Specification, v1.24 [3] Enhanced Wireless Consortium PHY Specification, v1.27 [4] IEEE802dot11-MIB " REVISION "200612110000Z" DESCRIPTION "Initial version of this MIB module. " ::= { ciscoMgmt 607 } ciscoDot11HtPhyMIBNotifs OBJECT IDENTIFIER ::= { ciscoDot11HtPhyMIB 0 } ciscoDot11HtPhyMIBObjects OBJECT IDENTIFIER ::= { ciscoDot11HtPhyMIB 1 } ciscoDot11HtPhyMIBConform OBJECT IDENTIFIER ::= { ciscoDot11HtPhyMIB 2 } cD11HtPhy OBJECT IDENTIFIER ::= { ciscoDot11HtPhyMIBObjects 1 } -- ******************************************************************** -- TEXTUAL CONVENTION -- ******************************************************************** CD11HtPhyBeamformFeedback ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "This textual convention represents the Beamforming feedback characteristics. The semantics are as follows. 'unsolicited' - The 802.11n interface can provide unsolicited feedback. 'immediate' - The 802.11n interface can provide immediate feedback. 'aggregated' - The 802.11n interface can provide an aggregated feedback. If none of these bits are set, it indicates that the 802.11n interface is incapable of providing the feedback. " SYNTAX BITS { unsolicited (0), immediate (1), aggregated (2) } -- ******************************************************************** -- HT PHY Antenna Table -- ******************************************************************** cD11HtPhyAntennaTable OBJECT-TYPE SYNTAX SEQUENCE OF CD11HtPhyAntennaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table describes the antennas connected to the 802.11n interface. Entries in this table are created automatically by the agent corresponding to each 802.11n radio interface. There exists in this table, an entry corresponding to each entry in dot11PhyOperationTable where dot11PHYType equals 'ht'(7). " ::= { cD11HtPhy 1 } cD11HtPhyAntennaEntry OBJECT-TYPE SYNTAX CD11HtPhyAntennaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents a conceptual row in cD11HtPhyAntennaTable and describes the antennas connected to the 802.11n interface. " INDEX { ifIndex } ::= { cD11HtPhyAntennaTable 1 } CD11HtPhyAntennaEntry ::= SEQUENCE { cD11HtPhyAntennaSelectionImplemented TruthValue, cD11HtPhyXmitExpCSIFdbkASImplemented TruthValue, cD11HtPhyXmitIndFdbkASImplemented TruthValue, cD11HtPhyExplCSIFdbkASImplemented TruthValue, cD11HtPhyXmitIndCompFdbkASImplemented TruthValue, cD11HtPhyRcvAntennaSelImplemented TruthValue, cD11HtPhyXmitSoundPPDUImplemented TruthValue } cD11HtPhyAntennaSelectionImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object, when 'true', indicates that antenna selection is supported on this 802.11n interface. " DEFVAL { false } ::= { cD11HtPhyAntennaEntry 1 } cD11HtPhyXmitExpCSIFdbkASImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object, when 'true', indicates that transmit Antenna Selection based on explicit CSI feedback is supported on this 802.11n interface. " DEFVAL { false } ::= { cD11HtPhyAntennaEntry 5 } cD11HtPhyXmitIndFdbkASImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object, when 'true', indicates that the transmit antenna selection based on antenna indices feedback is supported on this 802.11n interface. " DEFVAL { false } ::= { cD11HtPhyAntennaEntry 6 } cD11HtPhyExplCSIFdbkASImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object, when 'true', indicates that the computation of CSI and feedback to support the peer to do antenna selection is supported on this 802.11n interface. " DEFVAL { false } ::= { cD11HtPhyAntennaEntry 7 } cD11HtPhyXmitIndCompFdbkASImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object is set to 'true' to indicate that the transmit antenna selection based on antenna indices selection computation and feedback the results to support the peer to do antenna selection is supported on this 802.11n interface. " DEFVAL { false } ::= { cD11HtPhyAntennaEntry 8 } cD11HtPhyRcvAntennaSelImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object is set to 'true' to indicate that the receive antenna selection is supported on this 802.11n interface. " DEFVAL { false } ::= { cD11HtPhyAntennaEntry 9 } cD11HtPhyXmitSoundPPDUImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object when set to 'true', indicates that the transmission of sounding PPDUs is supported on the 802.11n interface. " DEFVAL { false } ::= { cD11HtPhyAntennaEntry 10 } -- ********************************************************************* -- * 802.11nPhy HT TABLE -- ********************************************************************* cD11HtPhyTable OBJECT-TYPE SYNTAX SEQUENCE OF CD11HtPhyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents the physical layer parameters of the 802.11n radio interface. Entries in this table are created automatically by the agent corresponding to each 802.11n interface. There exists in this table, an entry corresponding to each entry in dot11PhyOperationTable where dot11PHYType equals 'ht'(7). " ::= { cD11HtPhy 2 } cD11HtPhyEntry OBJECT-TYPE SYNTAX CD11HtPhyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents a conceptual row in cD11HtPhyTable and corresponds to the support available for the various high-throughput capabilities on an 802.11n interface. " INDEX { ifIndex } ::= { cD11HtPhyTable 1 } CD11HtPhyEntry ::= SEQUENCE { cD11HtPhyOperatingMode INTEGER, cD11HtPhyOperModeFrequency INTEGER, cD11HtPhyOperBand INTEGER, cD11HtPhyFortyMHzOperationImplemented TruthValue, cD11HtPhyFortyMHzOperationEnabled TruthValue, cD11HtPhyCurrentControlChannel Unsigned32, cD11HtPhyCurrentExtensionChannel INTEGER, cD11HtPhyExtChannelCCAImplemented TruthValue, cD11HtPhyNumberOfSpatialStreamsImplemented INTEGER, cD11HtPhyNumberOfSpatialStreamsEnabled INTEGER, cD11HtPhyGreenFieldImplemented TruthValue, cD11HtPhyGreenFieldEnabled TruthValue, cD11HtPhyShortGIInTwentyImplemented TruthValue, cD11HtPhyShortGIInTwentyEnabled TruthValue, cD11HtPhyShortGIInFortyImplemented TruthValue, cD11HtPhyShortGIInFortyEnabled TruthValue, cD11HtPhyAdvancedCodingImplemented TruthValue, cD11HtPhyAdvancedCodingEnabled TruthValue, cD11HtPhyTxSTBCImplemented TruthValue, cD11HtPhyTxSTBCEnabled TruthValue, cD11HtPhyRxSTBCImplemented TruthValue, cD11HtPhyRxSTBCEnabled TruthValue, cD11HtPhyBeamFormingImplemented TruthValue, cD11HtPhyBeamFormingEnabled TruthValue } cD11HtPhyOperatingMode OBJECT-TYPE SYNTAX INTEGER { legacy(1), mixed(2), greenField(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the mode of operation of 802.11n interface at the physical layer. The semantics are as follows. legacy - In this mode, packets are transmitted in the legacy 802.11a/g format. mixed - In this mode, packets are transmitted with a preamble that can be recognized by the legacy 802.11a/g devices. Both mixed mode and legacy packets can be recognised by the receiving 802.11n interface. greenField - In this mode, a transmitting station won't add a preamble to the packets sent. " ::= { cD11HtPhyEntry 1 } cD11HtPhyOperModeFrequency OBJECT-TYPE SYNTAX INTEGER { legacyMode(1), htMode(2), dupLegacyMode(3), fortyMHzUpperMode(4), fortyMHzLowerMode(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the channel characteristics of the PHY. The semantics are as follows. legacyMode - The radio channel characteristics are the same as that of 802.11a/802.11g radios. htMode - The radio operates in either 40MHz bandwidth with one to four spatial streams. dupLegacyMode - The radio operates in a 40MHz channel composed of 2 adjacent 20MHz channels. The packets sent are in the legacy 802.11a format in each of the 20MHz channels. fortyMHzUpperMode - The radio tranmits a legacy or HT packet in the upper 20MHz channel of a 40MHz channel. fortyMHzLowerMode - The radio transmits a legacy or HT packet in the lower 20MHz channel of a 40MHz channel. " ::= { cD11HtPhyEntry 2 } cD11HtPhyOperBand OBJECT-TYPE SYNTAX INTEGER { band24GHz(1), band5GHz(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the frequency band an 802.11n radio operates in. The semantics are as follows. 24GHz - The radio operates in the 2.4GHz frequency band. 5GHz - The radio operates in the 5 GHz frequency band. " ::= { cD11HtPhyEntry 3 } cD11HtPhyFortyMHzOperationImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object, when set to 'true', indicates that the 40 MHz operation is implemented. " DEFVAL { false } ::= { cD11HtPhyEntry 4 } cD11HtPhyFortyMHzOperationEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object , when set to 'true', indicates that the 40 MHz Operation is enabled. " DEFVAL { false } ::= { cD11HtPhyEntry 5 } cD11HtPhyCurrentControlChannel OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the operating channel. If 40 MHz mode is currently in use then this object indicates the control channel. " ::= { cD11HtPhyEntry 6 } cD11HtPhyCurrentExtensionChannel OBJECT-TYPE SYNTAX INTEGER { noExtension(1), extensionAbove(2), extensionBelow(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the channel extension offset. The semantics are as follows. noExtension - No extension channel is present and the radio operates in the 20MHz mode. extensionAbove - The extension channel is above the control channel. This is applicable only if the radio operates in the 40MHz mode. extensionBelow - The extension channel is below the control channel. This is applicable only if the radio operates in the 40MHz mode. " ::= { cD11HtPhyEntry 7 } cD11HtPhyExtChannelCCAImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object, when set to true, indicates that making a CCA on the extension channel is supported. " DEFVAL { false } ::= { cD11HtPhyEntry 8 } cD11HtPhyNumberOfSpatialStreamsImplemented OBJECT-TYPE SYNTAX INTEGER (1..4) MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the maximum number of spatial streams implemented. " DEFVAL { 2 } ::= { cD11HtPhyEntry 9 } cD11HtPhyNumberOfSpatialStreamsEnabled OBJECT-TYPE SYNTAX INTEGER (1..4) MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the maximum number of spatial streams enabled. " DEFVAL { 2 } ::= { cD11HtPhyEntry 10 } cD11HtPhyGreenFieldImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object, when set to 'true', indicates that the Greenfield option is implemented. " DEFVAL { false } ::= { cD11HtPhyEntry 11 } cD11HtPhyGreenFieldEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object, when set to 'true', indicates that the Greenfield option is enabled. " DEFVAL { false } ::= { cD11HtPhyEntry 12 } cD11HtPhyShortGIInTwentyImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object, when set to 'true', indicates that the Short-Guard option is implemented for 20 MHz operation. " DEFVAL { false } ::= { cD11HtPhyEntry 13} cD11HtPhyShortGIInTwentyEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object, when set to 'true', indicates that the Short Guard option is enabled for 20 MHz operation. " DEFVAL { false } ::= { cD11HtPhyEntry 14 } cD11HtPhyShortGIInFortyImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object, when set to 'true', indicates that the Short Guard option is implemented for 40 MHz operation. " DEFVAL { false } ::= { cD11HtPhyEntry 15 } cD11HtPhyShortGIInFortyEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object, when set to 'true', indicates that the Short Guard option is enabled for 40 MHz operation. " DEFVAL { false } ::= { cD11HtPhyEntry 16 } cD11HtPhyAdvancedCodingImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object, when set to 'true', indicates that the Advanced Coding option is implemented. " DEFVAL { false } ::= { cD11HtPhyEntry 17 } cD11HtPhyAdvancedCodingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object, when set to 'true', indicates that the Advanced Coding option is enabled. " DEFVAL { false } ::= { cD11HtPhyEntry 18 } cD11HtPhyTxSTBCImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object, when set to 'true', indicates that the entity is capable of transmitting frames using Space-Time Block Code (STBC) option. " DEFVAL { false } ::= { cD11HtPhyEntry 19 } cD11HtPhyTxSTBCEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object, when set to 'true', indicates that the entity's capability of transmitting frames using Space-Time Block Code (STBC) option is enabled. " DEFVAL { false } ::= { cD11HtPhyEntry 20 } cD11HtPhyRxSTBCImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object, when set to 'true', indicates that the entity is capable of receiving frames that are sent using the Space-Time Block Code (STBC). " DEFVAL { false } ::= { cD11HtPhyEntry 21 } cD11HtPhyRxSTBCEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object, when set to 'true', indicates that the entity's capability of receiving frames that are sent using the Space-Time Block Code (STBC) is enabled. " DEFVAL { false } ::= { cD11HtPhyEntry 22 } cD11HtPhyBeamFormingImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object, when set to 'true', indicates that the Beam Forming option is implemented. " DEFVAL { false } ::= { cD11HtPhyEntry 23 } cD11HtPhyBeamFormingEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object, when set to 'true', indicates that the BeamForming option is enabled. " DEFVAL { false } ::= { cD11HtPhyEntry 24 } -- ********************************************************************* -- * End of 802.11n PHY HT TABLE -- ********************************************************************* -- ********************************************************************* -- * 802.11nSupported MCS TABLE -- ********************************************************************* cD11HtPhySupportedMCSTable OBJECT-TYPE SYNTAX SEQUENCE OF CD11HtPhySupportedMCSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents the transmit and receive MCS supported by the PLCP and PMD, represented by a count from 0 to 127, subject to limitations of each individual PHY. Entries in this table are created automatically by the agent corresponding to each 802.11n compliant interface. There exists in this table, an entry corresponding to each entry in dot11PhyOperationTable where dot11PHYType equals 'ht'(7). " ::= { cD11HtPhy 3 } cD11HtPhySupportedMCSEntry OBJECT-TYPE SYNTAX CD11HtPhySupportedMCSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents a conceptual row in cD11HtPhySupportedMCSTable and describes the transmit and receive MCS supported on this 802.11n interface. " INDEX { ifIndex } ::= { cD11HtPhySupportedMCSTable 1 } CD11HtPhySupportedMCSEntry ::= SEQUENCE { cD11HtPhySupportedMCSTxValue OCTET STRING, cD11HtPhySupportedMCSRxValue OCTET STRING } cD11HtPhySupportedMCSTxValue OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..127)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Transmit MCS supported by the PLCP and PMD. " ::= { cD11HtPhySupportedMCSEntry 1 } cD11HtPhySupportedMCSRxValue OBJECT-TYPE SYNTAX OCTET STRING (SIZE(1..127)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the Receive MCS supported by the PLCP and PMD. " ::= { cD11HtPhySupportedMCSEntry 2 } -- ********************************************************************* -- * End of 802.11n Supported MCS TABLE -- ********************************************************************* -- ********************************************************************* -- * 802.11nTx BF Config TABLE -- ********************************************************************* cD11HtPhyTxBFConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF CD11HtPhyTxBFConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table describes the Transmit BeamForming capabilities of an 802.11n interface. Entries in this table are created automatically by the agent corresponding to each 802.11n interface. There exists in this table, an entry corresponding to each entry in dot11PhyOperationTable where dot11PHYType equals 'ht'(7). " ::= { cD11HtPhy 4 } cD11HtPhyTxBFConfigEntry OBJECT-TYPE SYNTAX CD11HtPhyTxBFConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents a conceptual row in cD11HtPhyTxBFConfigTable and corresponds to the Beamforming capabilities of an 802.11n interface. " INDEX { ifIndex } ::= { cD11HtPhyTxBFConfigTable 1 } CD11HtPhyTxBFConfigEntry ::= SEQUENCE { cD11HtPhyRxStaggerSoundImplemented TruthValue, cD11HtPhyTxStaggerSoundImplemented TruthValue, cD11HtPhyRxZLFImplemented TruthValue, cD11HtPhyTxZLFImplemented TruthValue, cD11HtPhyImplicitTxBFImplemented TruthValue, cD11HtPhyCalibrationImplemented INTEGER, cD11HtPhyExplCSITxBFImplemented TruthValue, cD11HtPhyExplUncompSteerMatrixImplemented TruthValue, cD11HtPhyExplBFCSIFdbkImplemented CD11HtPhyBeamformFeedback, cD11HtPhyExplUncompSteerMatrixFdbkImplemented CD11HtPhyBeamformFeedback, cD11HtPhyExplCompSteerMatrixFdbkImplemented CD11HtPhyBeamformFeedback, cD11HtPhyNumberBeamFormingCSISupportAntenna INTEGER, cD11HtPhyNumberUncompSteerMatrixSupportAntenna INTEGER, cD11HtPhyNumberCompSteerMatrixSupportAntenna INTEGER } cD11HtPhyRxStaggerSoundImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object, when set to 'true', indicates that the implementation supports the receiving of staggered sounding frames. " DEFVAL { false } ::= { cD11HtPhyTxBFConfigEntry 1 } cD11HtPhyTxStaggerSoundImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object, when set to 'true', indicates that the implementation supports the transmission of staggered sounding frames. " DEFVAL { false } ::= { cD11HtPhyTxBFConfigEntry 2 } cD11HtPhyRxZLFImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object, when set to 'true', indicates that the implementation is capable of receiving ZLF as sounding frames. " DEFVAL { false } ::= { cD11HtPhyTxBFConfigEntry 3 } cD11HtPhyTxZLFImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object, when set to 'true', indicates that the implementation is capable of transmitting ZLF as sounding frames. " DEFVAL { false } ::= { cD11HtPhyTxBFConfigEntry 4 } cD11HtPhyImplicitTxBFImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object, when set to 'true', indicates that the implementation is capable of applying implicit transmit beamforming. " DEFVAL { false } ::= { cD11HtPhyTxBFConfigEntry 5 } cD11HtPhyCalibrationImplemented OBJECT-TYPE SYNTAX INTEGER { inCapable (1), unableToInitiate (2), ableToInitiate (3), fullyCapable (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the level of calibration supported by the implementation. The semantics are follows. 'inCapable' - This station can't participate in a calibration procedure initiated by another station. 'unableToInitiate' - This station can involve in calibration, but cannot apply reciprocity correction vector received from the initiator and cannot initiate calibration. 'ableToInitiate' - This station can initiate calibration but cannot apply reciprocity correction vector received from the initiator. 'fullyCapable' - This statin can participate in a calibration procedure initiated by another station, can respond to a Sounding PPDU and provide a MIMO channel measurement report in response to the receipt of a Sounding PPDU. The station can also apply reciprocity correction vector received from the initiator of calibration response. " DEFVAL { inCapable } ::= { cD11HtPhyTxBFConfigEntry 6 } cD11HtPhyExplCSITxBFImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object, when set to 'true', indicates that implementation is capable of applying transmit beamforming using CSI explicit feedback in its transmission. " DEFVAL { false } ::= { cD11HtPhyTxBFConfigEntry 7 } cD11HtPhyExplUncompSteerMatrixImplemented OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object, when set to 'true', indicates that implementation is capable of applying transmit beamforming using uncompressed steering matrix explicit feedback in its transmission. " DEFVAL { false } ::= { cD11HtPhyTxBFConfigEntry 8 } cD11HtPhyExplBFCSIFdbkImplemented OBJECT-TYPE SYNTAX CD11HtPhyBeamformFeedback MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the level of CSI explicit feedback supported by the implementation. " ::= { cD11HtPhyTxBFConfigEntry 9 } cD11HtPhyExplUncompSteerMatrixFdbkImplemented OBJECT-TYPE SYNTAX CD11HtPhyBeamformFeedback MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the level of uncompressed steering matrix explicit feedback supported by the implementation. " ::= { cD11HtPhyTxBFConfigEntry 10 } cD11HtPhyExplCompSteerMatrixFdbkImplemented OBJECT-TYPE SYNTAX CD11HtPhyBeamformFeedback MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the level of uncompressed steering matrix explicit feedback returned by the implementation. " ::= { cD11HtPhyTxBFConfigEntry 11 } cD11HtPhyNumberBeamFormingCSISupportAntenna OBJECT-TYPE SYNTAX INTEGER (1..4) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the maximum number of beamform antennas the beamformee can support when CSI feedback is required. " ::= { cD11HtPhyTxBFConfigEntry 12 } cD11HtPhyNumberUncompSteerMatrixSupportAntenna OBJECT-TYPE SYNTAX INTEGER (1..4) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the maximum number of beamform antennas the beamformee can support when uncompressed steering matrix feedback is required. " ::= { cD11HtPhyTxBFConfigEntry 13 } cD11HtPhyNumberCompSteerMatrixSupportAntenna OBJECT-TYPE SYNTAX INTEGER (1..4) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the maximum number of beamform antennas the beamformee can support when compressed steering matrix feedback is required. " ::= { cD11HtPhyTxBFConfigEntry 14 } --******************************************************************** --* EWC Power level objects --******************************************************************** cD11HtPhyEnhPowerTable OBJECT-TYPE SYNTAX SEQUENCE OF CD11HtPhyEnhPowerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents the transmission power characteristics specific to 802.11n radio interfaces. There exists in this table, an entry corresponding to each entry in dot11PhyOperationTable where dot11PHYType equals 'ht'(7). " ::= { cD11HtPhy 5 } cD11HtPhyEnhPowerEntry OBJECT-TYPE SYNTAX CD11HtPhyEnhPowerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents a conceptual row in ccD11HtPhyEnhPowerTable and describes the transmission power characteristics specific to a 802.11n radio. " INDEX { ifIndex } ::= { cD11HtPhyEnhPowerTable 1 } CD11HtPhyEnhPowerEntry ::= SEQUENCE { cD11HtPhyEnhPowerLevel20MHz Unsigned32, cD11HtPhyEnhPowerLevel40MHz Unsigned32 } cD11HtPhyEnhPowerLevel20MHz OBJECT-TYPE SYNTAX Unsigned32(0..10) MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the power level of the 802.11n radio when operating at 20 MHz. A value of 0 indicates that the power level couldn't be determined at the time the agent is queried for an instance of this object. " ::= { cD11HtPhyEnhPowerEntry 1 } cD11HtPhyEnhPowerLevel40MHz OBJECT-TYPE SYNTAX Unsigned32(0..10) MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the power level of the 802.11n radio when operating at 40 MHz. A value of 0 indicates that the power level couldn't be determined at the time the agent is queried for an instance of this object. " ::= { cD11HtPhyEnhPowerEntry 2 } --******************************************************************** --* Compliance statements --******************************************************************** ciscoDot11HtPhyMIBCompliances OBJECT IDENTIFIER ::= { ciscoDot11HtPhyMIBConform 1 } ciscoDot11HtPhyMIBGroups OBJECT IDENTIFIER ::= { ciscoDot11HtPhyMIBConform 2 } ciscoDot11HtMacCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the SNMP entities that implement the ciscoDot11HtPhyMIB module. " MODULE MANDATORY-GROUPS { ciscoDot11HtPhyAntennaGroup, ciscoDot11HtPhyConfigGroup, ciscoDot11HtPhyMcsGroup, ciscoDot11HtPhyTxBfGroup, ciscoDot11HtPhyEnhPowerLevelsGroup } ::= { ciscoDot11HtPhyMIBCompliances 1 } --******************************************************************** --* Units of conformance --******************************************************************** ciscoDot11HtPhyAntennaGroup OBJECT-GROUP OBJECTS { cD11HtPhyAntennaSelectionImplemented, cD11HtPhyXmitExpCSIFdbkASImplemented, cD11HtPhyXmitIndFdbkASImplemented, cD11HtPhyExplCSIFdbkASImplemented, cD11HtPhyXmitIndCompFdbkASImplemented, cD11HtPhyRcvAntennaSelImplemented, cD11HtPhyXmitSoundPPDUImplemented } STATUS current DESCRIPTION "This collection of objects represent the antennae-related parameters. " ::= { ciscoDot11HtPhyMIBGroups 1 } ciscoDot11HtPhyConfigGroup OBJECT-GROUP OBJECTS { cD11HtPhyOperatingMode, cD11HtPhyOperModeFrequency, cD11HtPhyOperBand, cD11HtPhyFortyMHzOperationImplemented, cD11HtPhyFortyMHzOperationEnabled, cD11HtPhyCurrentControlChannel, cD11HtPhyCurrentExtensionChannel, cD11HtPhyExtChannelCCAImplemented, cD11HtPhyNumberOfSpatialStreamsImplemented, cD11HtPhyNumberOfSpatialStreamsEnabled, cD11HtPhyGreenFieldImplemented, cD11HtPhyGreenFieldEnabled, cD11HtPhyShortGIInTwentyImplemented, cD11HtPhyShortGIInTwentyEnabled, cD11HtPhyShortGIInFortyImplemented, cD11HtPhyShortGIInFortyEnabled, cD11HtPhyAdvancedCodingImplemented, cD11HtPhyAdvancedCodingEnabled, cD11HtPhyTxSTBCImplemented, cD11HtPhyTxSTBCEnabled, cD11HtPhyRxSTBCImplemented, cD11HtPhyRxSTBCEnabled, cD11HtPhyBeamFormingImplemented, cD11HtPhyBeamFormingEnabled } STATUS current DESCRIPTION "This collection of objects represent the operating parameters of the 802.11n radio at the physical layer. " ::= { ciscoDot11HtPhyMIBGroups 2 } ciscoDot11HtPhyMcsGroup OBJECT-GROUP OBJECTS { cD11HtPhySupportedMCSTxValue, cD11HtPhySupportedMCSRxValue } STATUS current DESCRIPTION "This collection of objects represent the MCS rates supported by the 802.11n radio. " ::= { ciscoDot11HtPhyMIBGroups 3 } ciscoDot11HtPhyTxBfGroup OBJECT-GROUP OBJECTS { cD11HtPhyRxStaggerSoundImplemented, cD11HtPhyTxStaggerSoundImplemented, cD11HtPhyRxZLFImplemented, cD11HtPhyTxZLFImplemented, cD11HtPhyImplicitTxBFImplemented, cD11HtPhyCalibrationImplemented, cD11HtPhyExplCSITxBFImplemented, cD11HtPhyExplUncompSteerMatrixImplemented, cD11HtPhyExplBFCSIFdbkImplemented, cD11HtPhyExplUncompSteerMatrixFdbkImplemented, cD11HtPhyExplCompSteerMatrixFdbkImplemented, cD11HtPhyNumberBeamFormingCSISupportAntenna, cD11HtPhyNumberUncompSteerMatrixSupportAntenna, cD11HtPhyNumberCompSteerMatrixSupportAntenna } STATUS current DESCRIPTION "This collection of objects represent the transmit BeamForming configuration on an 802.11n radio. " ::= { ciscoDot11HtPhyMIBGroups 4 } ciscoDot11HtPhyEnhPowerLevelsGroup OBJECT-GROUP OBJECTS { cD11HtPhyEnhPowerLevel20MHz, cD11HtPhyEnhPowerLevel40MHz } STATUS current DESCRIPTION "This collection of objects represents the transmission power characteristics specific to a 802.11n radio. " ::= { ciscoDot11HtPhyMIBGroups 5 } --******************************************************************** --* End of units of conformance --******************************************************************** END