-- ********************************************************************* -- CISCO-FICON-MIB.my: Cisco mib for FICON (FIber CONnection) -- -- July 2004, Charuhas Ghatge -- -- Copyright (c) 2004, 2005, 2006 by cisco Systems, Inc. -- All rights reserved. -- -- ********************************************************************* CISCO-FICON-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, NOTIFICATION-TYPE, MODULE-IDENTITY, Integer32, Counter32, Unsigned32 FROM SNMPv2-SMI TruthValue,RowStatus,DisplayString, TEXTUAL-CONVENTION FROM SNMPv2-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF ifIndex, InterfaceIndex FROM IF-MIB ciscoMgmt FROM CISCO-SMI FcAddressId FROM CISCO-ST-TC vsanIndex FROM CISCO-VSAN-MIB; ciscoFiconMIB MODULE-IDENTITY LAST-UPDATED "200604070000Z" -- 7 April, 2006 ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 West Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-san@cisco.com" DESCRIPTION "This is the FICON (FIber CONnection) MIB module. FICON is an IBM standard of transport mechanism for communication between the mainframes and devices and is a major consideration for enterprise data centers. The Cisco MDS Storage Area Network (SAN) switches provide the functionality of a FICON Director to the customers. " REVISION "200604070000Z" -- 7 April, 2006 DESCRIPTION "Changed DESCRIPTION of cficonDefaultPortBlock." REVISION "200603140000Z" -- 14 March, 2006 DESCRIPTION "Added cficonDefaultPortBlock. Added cficonDefaultPortBlockGroup. Added ciscoFiconComplianceRev3. Added ciscoFiconGlobal." REVISION "200510210000Z" -- 21 October, 2005 DESCRIPTION "Added cficonInterfaceSwapTable." REVISION "200510060000Z" -- 6 October, 2005 DESCRIPTION "Added cficonPortMapTable, cficonPortMapMax, cficonSlotPortNumTable and cficonLogicReservedPN for FICON port-numbering scheme. Added cficonRlirErlTable." REVISION "200506010000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 375 } ciscoFiconMIBNotifications OBJECT IDENTIFIER ::= { ciscoFiconMIB 0 } ciscoFiconMIBObjects OBJECT IDENTIFIER ::= { ciscoFiconMIB 1 } ciscoFiconMIBConform OBJECT IDENTIFIER ::= { ciscoFiconMIB 2 } ciscoFiconConfig OBJECT IDENTIFIER ::= { ciscoFiconMIBObjects 1 } ciscoFiconGlobal OBJECT IDENTIFIER ::= { ciscoFiconMIBObjects 2 } -- Definitions and Glossary -- -- FICON Director - This refers to a device that implements the -- FICON Control Device functionality. -- -- Port Connectivity Attributes - At initial installation, the -- FICON Director allows any port to -- communicate with any other port. To restrict -- this ability, the following connectivity -- attributes are defined - -- -- Block - If this is ON, it prevents all -- communications on this port. -- -- Prohibit - Each port has a vector pf 256 -- bits specifying which ports it can -- or cannot communicate. -- -- External Ports - These are the physical ports present in a -- FICON Director. -- -- Internal Ports - Internal ports provide an interface to the -- internal functionality and do not have -- a physical counterpart. -- -- Installed Ports - An installed port is an external port for -- which port hardware has been installed. -- -- Port Number - This is a unique value that identifies a -- physical port on the FICON Director. -- -- Port Address - This is a unique value that identifies a -- port for all commands regarding Port -- Connectivity Attributes. Port address has -- static relationship with the Port Number. -- After a port swap command, the Port Address -- is changed but the Port Number remains same. -- -- Control Unit Port (CUP) - A functionality that enables a host -- to configure the FICON Director as if it is -- a Control Device which understands FICON -- commands. -- Registered Link Incident Report (RLIR) - RLIR ELS is a means of -- sending the Link Incident Reports. -- Established Registration List (ERL) - A list of Nx_Ports -- registered for receiving RLIR ELS. -- Textual Conventions CficonPortNumOrAddr ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The port number or port address." SYNTAX Integer32(0..255) -- -- FICON port default state in new vsan -- cficonDefaultPortBlock OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the default state which whether to prohibit traffic or allow traffic among all External Ports of a new FICON VSAN. If 'true' the default state is prohibit all traffic, else the default state is allow all traffic. The default values of the cficonProhibitPortNumbers and the cficonRunCfgProhibitPrtNums in a newly created FICON VSAN are consistent with the state of this object." ::= {ciscoFiconGlobal 1} -- -- FICON port swap table -- cficonPortSwapTable OBJECT-TYPE SYNTAX SEQUENCE OF CficonPortSwapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table to issue the port swap command. In FICON, lots of configuration in the host is associated with a port-address. If the FICON port connecting the host to the switch has some problem and the user wants to connect the host to a different port in the switch, one needs to swap the configuration of the two ports. This command transparently swaps the configuration of two ports without affecting the host." ::= { ciscoFiconConfig 1 } cficonPortSwapEntry OBJECT-TYPE SYNTAX CficonPortSwapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A cficonPortSwapTable entry. A management station wishing to create an entry should first generate a pseudo-random serial number to be used as the index to this sparse table. The station should then create the associated instance of the row status object. It must also, in the same PDU create the associated instance of the cficonSwapPortNumberFirst and cficonSwapPortNumberSecond objects. Note that when creating a row in this table, the cficonSwapPortEntryStatus, cficonSwapPortNumberFirst and cficonSwapPortNumberSecond are all required. Once the operation completes, the management station should delete the entry. " INDEX { cficonPortSwapIndex } ::= { cficonPortSwapTable 1 } CficonPortSwapEntry ::= SEQUENCE { cficonPortSwapIndex Integer32, cficonSwapPortNumberFirst CficonPortNumOrAddr, cficonSwapPortNumberSecond CficonPortNumOrAddr, cficonSwapPortEntryStatus RowStatus } cficonPortSwapIndex OBJECT-TYPE SYNTAX Integer32(1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary index for the swap command." ::= {cficonPortSwapEntry 1} cficonSwapPortNumberFirst OBJECT-TYPE SYNTAX CficonPortNumOrAddr MAX-ACCESS read-create STATUS current DESCRIPTION "The first port number that needs to be swapped ." ::= {cficonPortSwapEntry 2} cficonSwapPortNumberSecond OBJECT-TYPE SYNTAX CficonPortNumOrAddr MAX-ACCESS read-create STATUS current DESCRIPTION "The second port number that needs to be swapped." ::= {cficonPortSwapEntry 3} cficonSwapPortEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "If this object is set to 'createAndGo(4)' then the port configurations of the ports specified by objects cficonSwapPortNumberFirst and cficonSwapPortNumberSecond will be swapped." ::= {cficonPortSwapEntry 4} -- -- FICON Vsan Table -- cficonVsanTable OBJECT-TYPE SYNTAX SEQUENCE OF CficonVsanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the objects to manage FICON functionality in a VSAN. " ::= { ciscoFiconConfig 2 } cficonVsanEntry OBJECT-TYPE SYNTAX CficonVsanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A cficonVsanTable entry. Each entry, identified by vsanIndex, provides the objects to manage FICON functionality in this VSAN, identified by vsanIndex. To create a vsan, only the cficonVsanEntryStatus needs to be set in the PDU. A vsan will be created with default values for all the objects in the entry. Once the vsan is created, the values of all the writable objects within a row can be modified. " INDEX { vsanIndex } ::= { cficonVsanTable 1 } CficonVsanEntry ::= SEQUENCE { cficonVsanHostControl TruthValue, cficonVsanHostControlSwOffline TruthValue, cficonVsanHostControlClkAlrtMode TruthValue, cficonVsanSnmpControl TruthValue, cficonVsanAutoSavePortAddrCfg TruthValue, cficonVsanEnableCup TruthValue, cficonVsanCodePage INTEGER, cficonVsanCharSet INTEGER, cficonVsanKeyCounter Integer32, cficonVsanUserAlertMode TruthValue, cficonVsanDeviceAllegience INTEGER, cficonVsanTime DisplayString, cficonVsanHostOrDefaultTime TruthValue, cficonVsanCupName SnmpAdminString, cficonSetHostTimeControl TruthValue, cficonVsanClearAllegience INTEGER, cficonVsanEntryStatus RowStatus, cficonVsanFiconState INTEGER, cficonVsanSerialNum SnmpAdminString } cficonVsanHostControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The object indicates whether the host is allowed to alter FICON Director connectivity parameters. If 'true' the host is allowed to alter the parameters, else it cannot." DEFVAL { true } ::= { cficonVsanEntry 1 } cficonVsanHostControlSwOffline OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The object specifying whether the host can put the VSAN offline. If 'true' it allows the host to put the VSAN offline, else it cannot." DEFVAL { true } ::= { cficonVsanEntry 2 } cficonVsanHostControlClkAlrtMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The object indicates whether director clock alert mode is enabled or disabled. If 'true', the mode is enabled, else it is disabled." DEFVAL { false } ::= { cficonVsanEntry 3 } cficonVsanSnmpControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The object indicates whether network management system is allowed to alter FICON director connectivity parameters. If 'true', the network management system is allowed to alter FICON director connectivity parameters, else, it cannot." DEFVAL { true } ::= { cficonVsanEntry 4 } cficonVsanAutoSavePortAddrCfg OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The object indicating whether the configuration will be saved in the configuration file for this VSAN. When an operator modifies a configuration, the running configuration is modified. If this object is 'true', then the configuration is saved in the configuration file as well. If this object is 'false', then the running configuration is not saved in the configuration file." DEFVAL { false } ::= { cficonVsanEntry 5 } cficonVsanEnableCup OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The object indicating Control Unit Port (CUP) is enabled. If 'true', CUP is enabled, else it is disabled." DEFVAL { true } ::= { cficonVsanEntry 6 } cficonVsanCodePage OBJECT-TYPE SYNTAX INTEGER { usa(37), germany(273), brazil(275), italy(280), japan(281), spain(284), uk(285), france(297), interNational(500) } MAX-ACCESS read-create STATUS current DESCRIPTION "The EBCDIC Code page used for the exchange of information with the host in this VSAN." DEFVAL { usa } ::= { cficonVsanEntry 7 } cficonVsanCharSet OBJECT-TYPE SYNTAX INTEGER { charSet697(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The Character Set used for the exchange of of information with the host in this VSAN. " DEFVAL { charSet697 } ::= { cficonVsanEntry 8 } cficonVsanKeyCounter OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "A counter that is incremented every time there is a configuration change. This counter is used by the Host to keep track of the number of configuration changes that have taken place." ::= { cficonVsanEntry 9 } cficonVsanUserAlertMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The object indicating whether director user alert mode is enabled or disabled. If 'true', the mode is enabled. else it is disabled." DEFVAL { false } ::= { cficonVsanEntry 10 } cficonVsanDeviceAllegience OBJECT-TYPE SYNTAX INTEGER { lockedByCLI(1), lockedBySnmp(2), lockedByHost(3), unlocked(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The object indicating whether CUP is in a allegiance state. If it is in allegiance state with a channel, it cannot accept any commands from any logical paths. A CUP goes in an allegiance state when it accepts command from a channel and forms 'an allegiance' with it until the successful completion of the channel program, at which point the CUP goes in a an 'unlocked' mode." DEFVAL { unlocked } ::= { cficonVsanEntry 11 } cficonVsanTime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The system time in the VSAN. This could be set either by the host or be the default global time in the FICON Director. The default global time is the local time in the FICON Director. The format is as follows - Wed Nov 5 18:53:52.172485 2003 " ::= { cficonVsanEntry 12 } cficonVsanHostOrDefaultTime OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The object indicating whether VSAN time is set by the host or the time is global time within a FICON Director. If 'true', the time was set by the host, else it is same as the FICON Director's global time." DEFVAL { false } ::= { cficonVsanEntry 13 } cficonVsanCupName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "The name of CUP." ::= { cficonVsanEntry 14 } cficonSetHostTimeControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The object indicating whether VSAN time can be set by the host. If 'true', the host can set the time, else it can not." DEFVAL { true } ::= { cficonVsanEntry 15 } cficonVsanClearAllegience OBJECT-TYPE SYNTAX INTEGER { clear(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The object used to clear a CUP allegiance. If this object is set with value, 'clear(1)' the CUP goes in a 'non-allegiance' or 'unlocked' mode as described in the description of cficonVsanDeviceAllegience object above." ::= { cficonVsanEntry 16 } cficonVsanEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." ::= { cficonVsanEntry 17 } cficonVsanFiconState OBJECT-TYPE SYNTAX INTEGER { offline(1), online(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The object used to control the state of the ports belonging to a vsan in the context of the FICON functionality. If this object is set to 'offline(1)' all the ports belonging to the vsan, specified by the vsanIndex are put in the suspended state. If this object is set to 'online(2)' all the ports belonging to the vsan, specified by the vsanIndex are put in the operational state." DEFVAL { online } ::= { cficonVsanEntry 18 } cficonVsanSerialNum OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The serial number of the FICON director." ::= { cficonVsanEntry 19 } -- -- FICON port table with configuration file -- cficonPortTable OBJECT-TYPE SYNTAX SEQUENCE OF CficonPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table listing the port information as stored in the configuration file. " ::= { ciscoFiconConfig 3 } cficonPortEntry OBJECT-TYPE SYNTAX CficonPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A cficonPortTable entry. Each entry provides the information about a port, identified by cficonPortAddr, in the configuration file, identified by cficonPortFilename, on this VSAN, identified by vsanIndex." INDEX { vsanIndex,cficonCfgFilename,cficonPortAddr } ::= { cficonPortTable 1 } CficonPortEntry ::= SEQUENCE { cficonPortAddr CficonPortNumOrAddr, cficonPortBlock TruthValue, cficonPortName SnmpAdminString, cficonProhibitPortNumbers OCTET STRING } cficonPortAddr OBJECT-TYPE SYNTAX CficonPortNumOrAddr MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Port Address of this port." ::= { cficonPortEntry 1 } cficonPortBlock OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The object indicates whether to block or unblock this port. This is one of the port-connectivity parameters. If 'true' this port is blocked, else it is unblocked." ::= { cficonPortEntry 2 } cficonPortName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "The name of this port." ::= { cficonPortEntry 3 } cficonProhibitPortNumbers OBJECT-TYPE SYNTAX OCTET STRING (SIZE (32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The list of ports that will be prohibited from communication. Each octet within the value of an object of this type, specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port and the least significant bit represents the highest numbered port." ::= { cficonPortEntry 4 } -- -- FICON port table for running configuration -- cficonPortRunCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF CficonPortRunCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table listing the port information as stored in the running configuration. Each port is identified by the port address in the context of its vsan Index." ::= { ciscoFiconConfig 4 } cficonPortRunCfgEntry OBJECT-TYPE SYNTAX CficonPortRunCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A cficonPortRunCfgTable entry. Each entry provides the information about a port (identified by cficonPortAddr), on this VSAN (identified by vsanIndex), for the running configuration." INDEX { vsanIndex, cficonPortRunCfgAddr } ::= { cficonPortRunCfgTable 1 } CficonPortRunCfgEntry ::= SEQUENCE { cficonPortRunCfgAddr CficonPortNumOrAddr, cficonPortRunCfgBlock TruthValue, cficonPortRunCfgName SnmpAdminString, cficonRunCfgProhibitPrtNums OCTET STRING, cficonRunCfgTypeNumber DisplayString, cficonRunCfgModelNumber DisplayString, cficonRunCfgManufacturer DisplayString, cficonRunCfgPlantOfMfg DisplayString, cficonRunCfgSerialNumber DisplayString, cficonRunCfgUnitType INTEGER, cficonRunCfgPortId Integer32, cficonRunCfgStatus INTEGER } cficonPortRunCfgAddr OBJECT-TYPE SYNTAX CficonPortNumOrAddr MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address of this port." ::= { cficonPortRunCfgEntry 1 } cficonPortRunCfgBlock OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The object indicating whether to block or unblock this port. If 'true' this port is blocked, else it is unblocked." ::= { cficonPortRunCfgEntry 2 } cficonPortRunCfgName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "The port name of this port." ::= { cficonPortRunCfgEntry 3 } cficonRunCfgProhibitPrtNums OBJECT-TYPE SYNTAX OCTET STRING (SIZE (256)) MAX-ACCESS read-write STATUS current DESCRIPTION "The list of ports that will be prohibited. Each octet within the value of an object of this type specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port and the least significant bit represents the highest numbered port." ::= { cficonPortRunCfgEntry 4 } cficonRunCfgTypeNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (1..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The type number for this FICON Director." ::= { cficonPortRunCfgEntry 5 } cficonRunCfgModelNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (1..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The model number for this FICON Director. It is in the form of ASCII characters. " ::= { cficonPortRunCfgEntry 6 } cficonRunCfgManufacturer OBJECT-TYPE SYNTAX DisplayString (SIZE (1..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the the company that manufactured this FICON Director. " ::= { cficonPortRunCfgEntry 7 } cficonRunCfgPlantOfMfg OBJECT-TYPE SYNTAX DisplayString (SIZE (1..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The plant code that identifies the plant of manufacture of this FICON Director. " ::= { cficonPortRunCfgEntry 8 } cficonRunCfgSerialNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (1..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The sequence number assigned to this FICON Director during manufacturing." ::= { cficonPortRunCfgEntry 9 } cficonRunCfgUnitType OBJECT-TYPE SYNTAX INTEGER { channel(1), controlUnit(2), fabric(3), unknown(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The peer type of the port that this port is communicating. channel - Host controlUnit - Disk fabric - Another SAN switch" ::= { cficonPortRunCfgEntry 10 } cficonRunCfgPortId OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This is the identifier of the peer port. If the peer port is channel, as described by the instance of cficonRunCfgUnitType, then cficonRunCfgPortId will be the CHPID (Channel Path Identifier) of the channel path that contains this peer port. If the peer port is controlUnit, then cficonRunCfgPortId will be 0. If the peer port is fabric, then cficonRunCfgPortId will be port address of the interface on the peer switch." ::= { cficonPortRunCfgEntry 11 } cficonRunCfgStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2), old(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the status of the row, whether some specific columns in this row are valid, invalid or old. These specific columns are - cficonRunCfgProhibitPrtNums, cficonRunCfgTypeNumber, cficonRunCfgModelNumber, cficonRunCfgManufacturer, cficonRunCfgPlantOfMfg, cficonRunCfgSerialNumber and cficonRunCfgUnitType. The only value that can be assigned by the Network Management System(NMS) is 'invalid'. The NMS cannot set this object to any other value (i.e 'valid' or 'old'). valid - The information ( values of the other columns) is guaranteed to be correct. old - The information was valid before the port went down. Although the information has not vanished, it cannot be guaranteed. invalid - When the port does not have the information at all. (i.e. when the port comes up for the first time or the NMS clears the information. " ::= { cficonPortRunCfgEntry 12 } -- -- per vsan configuration file table -- cficonCfgFileTable OBJECT-TYPE SYNTAX SEQUENCE OF CficonCfgFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table listing the configuration files for each vsan." ::= { ciscoFiconConfig 5 } cficonCfgFileEntry OBJECT-TYPE SYNTAX CficonCfgFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A cficonCfgFileTable entry. Each entry provides the configuration file for a vsan (identified by vsanIndex) and a file (identified by cficonCfgFilename). Each entry lists the file status, the time the file was last updated etc. The cficonCfgFileRowStatus object is used to create or delete a configuration file. For creation or deletion, only the cficonCfgFileRowStatus object needs to be set in the PDU. cficonCfgFileCmd object is used to apply this configuration file to the vsan specified by the vsanIndex. For example, To create a configuration file 'cfg' for vsan 1, the management application must do the following - cficonCfgFileRowStatus.1.cfg = createAndGo; To delete the configuration file, cficonCfgFileRowStatus.1.cfg = destroy; To apply this configuration file, cficonCfgFileCmd.1.cfg = apply; " INDEX { vsanIndex,cficonCfgFilename } ::= { cficonCfgFileTable 1 } CficonCfgFileEntry ::= SEQUENCE { cficonCfgFilename SnmpAdminString, cficonCfgFileDescr SnmpAdminString, cficonCfgFileStatus INTEGER, cficonCfgFileLastUpdated SnmpAdminString, cficonCfgFileCmd INTEGER, cficonCfgFileRowStatus RowStatus, cficonCfgFileCmdStatus INTEGER, cficonCfgFileCmdErrorString SnmpAdminString } cficonCfgFilename OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..64)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of the configuration file." ::= { cficonCfgFileEntry 1 } cficonCfgFileDescr OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "The description of the configuration file." ::= { cficonCfgFileEntry 2 } cficonCfgFileStatus OBJECT-TYPE SYNTAX INTEGER { locked(1), unlocked(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of filename containing these ports. Network Management station must check this object before it can read the contents of the configuration file. If it is 'locked', it means that the host or the CLI or the network management station is in the process of writing the contents of this file. If it is 'locked' the the file cannot be read. If it is 'unlocked', then the file is ready to be read." ::= { cficonCfgFileEntry 3 } cficonCfgFileLastUpdated OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The time this file was last updated. The format is as follows - Wed Nov 5 18:53:52.172485 2003 " ::= { cficonCfgFileEntry 4 } cficonCfgFileCmd OBJECT-TYPE SYNTAX INTEGER { apply(1), noOp(2), open(3), close(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The object to apply this configuration file to the VSAN identified by the vsanIndex. When reading this object, a noOp(2) is returned. open(3) opens this file for modifying. close(4) closes this file." ::= { cficonCfgFileEntry 5 } cficonCfgFileRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The rowStatus of this row." ::= { cficonCfgFileEntry 6 } cficonCfgFileCmdStatus OBJECT-TYPE SYNTAX INTEGER { success(1), inProgress(2), failed(3), notApplicable(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The object to describe the status of the last 'apply' command. success - The last apply command was successful. inProgress - The last apply command is still in the process of execution. failed - The last apply command failed. notApplicable - The last apply command status is not available." ::= { cficonCfgFileEntry 7 } cficonCfgFileCmdErrorString OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The string describing the reason the the last 'apply' command failed. This string needs to be polled only in the case when the value of the cficonCfgFileCmdStatus is 'failed'. " ::= { cficonCfgFileEntry 8 } -- -- Port number to ifIndex association table -- cficonPortNumIfTable OBJECT-TYPE SYNTAX SEQUENCE OF CficonPortNumIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table listing the association of Port number to its interface index. " ::= { ciscoFiconConfig 6 } cficonPortNumIfEntry OBJECT-TYPE SYNTAX CficonPortNumIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A cficonPortNumIfTable entry. Each entry provides a mapping between the port number and its interface index." INDEX { cficonPortNumber } ::= { cficonPortNumIfTable 1 } CficonPortNumIfEntry ::= SEQUENCE { cficonPortNumber CficonPortNumOrAddr, cficonPortIfIndex InterfaceIndex } cficonPortNumber OBJECT-TYPE SYNTAX CficonPortNumOrAddr MAX-ACCESS not-accessible STATUS current DESCRIPTION "The port number of this port." ::= { cficonPortNumIfEntry 1 } cficonPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-write STATUS current DESCRIPTION "The interface index of this port. For ports that are not installed, this object would be zero." ::= { cficonPortNumIfEntry 2 } -- -- Port address to Port number association table -- cficonPortAddrNumTable OBJECT-TYPE SYNTAX SEQUENCE OF CficonPortAddrNumEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table listing the association of Port address to port number. " ::= { ciscoFiconConfig 7 } cficonPortAddrNumEntry OBJECT-TYPE SYNTAX CficonPortAddrNumEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A cficonPortAddrNumTable entry. Each entry provides the port address to port number mapping. " INDEX { cficonPortAddrPortAddr } ::= { cficonPortAddrNumTable 1 } CficonPortAddrNumEntry ::= SEQUENCE { cficonPortAddrPortAddr CficonPortNumOrAddr, cficonPortAddrPortNumber CficonPortNumOrAddr } cficonPortAddrPortAddr OBJECT-TYPE SYNTAX CficonPortNumOrAddr MAX-ACCESS not-accessible STATUS current DESCRIPTION "The port address of this port." ::= { cficonPortAddrNumEntry 1 } cficonPortAddrPortNumber OBJECT-TYPE SYNTAX CficonPortNumOrAddr MAX-ACCESS read-only STATUS current DESCRIPTION "The port number of this port." ::= { cficonPortAddrNumEntry 2 } -- -- Port number to portAddr association table -- cficonPortNumAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF CficonPortNumAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table listing the association of Port number to its port number. " ::= { ciscoFiconConfig 8 } cficonPortNumAddrEntry OBJECT-TYPE SYNTAX CficonPortNumAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A cficonPortNumAddrTable entry. Each entry provides a mapping between the port number and its port number." INDEX { portAddrPortNumber } ::= { cficonPortNumAddrTable 1 } CficonPortNumAddrEntry ::= SEQUENCE { portAddrPortNumber CficonPortNumOrAddr, portAddress CficonPortNumOrAddr } portAddrPortNumber OBJECT-TYPE SYNTAX CficonPortNumOrAddr MAX-ACCESS not-accessible STATUS current DESCRIPTION "The port number of this port." ::= { cficonPortNumAddrEntry 1 } portAddress OBJECT-TYPE SYNTAX CficonPortNumOrAddr MAX-ACCESS read-only STATUS current DESCRIPTION "The port address of this port." ::= { cficonPortNumAddrEntry 2 } -- -- Director History table -- cficonDirHistTable OBJECT-TYPE SYNTAX SEQUENCE OF CficonDirHistEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table listing the director history buffer. Director History Buffer is a mechanism to determine those ports that have changed their configuration for a particular value of a key counter. The FICON Director maintains a change vector of 256 bits (32 bytes) and an associated key counter. This table lists this vector for a given key counter. " ::= { ciscoFiconConfig 9 } cficonDirHistEntry OBJECT-TYPE SYNTAX CficonDirHistEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the cficonDirHistTable, identified by the vsanIndex and the key counter. " INDEX { vsanIndex,cficonDirHistKeyCounter } ::= { cficonDirHistTable 1 } CficonDirHistEntry ::= SEQUENCE { cficonDirHistKeyCounter Integer32, cficonDirHistPortNumbers OCTET STRING } cficonDirHistKeyCounter OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The key counter." ::= { cficonDirHistEntry 1 } cficonDirHistPortNumbers OBJECT-TYPE SYNTAX OCTET STRING (SIZE (32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The list of ports that have configuration change for a value of cficonDirHistKeyCounter. If a port has configuration change, its bit position will be 1. Each octet within the value of an object of this type, specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port and the least significant bit represents the highest numbered port." ::= { cficonDirHistEntry 2 } -- -- FICON statistics Table -- cficonStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CficonStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table listing the FICON Statistics ." ::= { ciscoFiconConfig 10 } cficonStatsEntry OBJECT-TYPE SYNTAX CficonStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry listing the FICON statistics for FICON port." INDEX { ifIndex } ::= { cficonStatsTable 1 } CficonStatsEntry ::= SEQUENCE { cfStatsFramePacingTime Counter32, cfStatsDispErrorsInFrame Counter32, cfStatsEOFErrs Counter32, cfStatsDispErrsOutOfFrame Counter32, cfStatsInvalidOrderSets Counter32, cfStatsErrorSummary Counter32 } cfStatsFramePacingTime OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of 2.5 microsecond units that frame transmission is blocked due to zero credit." ::= { cficonStatsEntry 1 } cfStatsDispErrorsInFrame OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of frames with disparity errors." ::= { cficonStatsEntry 2 } cfStatsEOFErrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of frames with EOF errors." ::= { cficonStatsEntry 3 } cfStatsDispErrsOutOfFrame OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of frames with OOF errors." ::= { cficonStatsEntry 4 } cfStatsInvalidOrderSets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of invalid or unrecognizable Order Sets outside of frames." ::= { cficonStatsEntry 5 } cfStatsErrorSummary OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter contains a sum of the errors counted by a set of the other defined error counters." ::= { cficonStatsEntry 6 } cficonShowPorts OBJECT-TYPE SYNTAX INTEGER { all(1), installed(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "An object to control which ports are displayed. If set to all(1), all the ports, regardless whether they are installed or not are displayed in the cficonPortTable and cificonPortRunCfgTable. If set to 'installed', only the ports that are installed ports are displayed in the cficonPortTable and cificonPortRunCfgTable. " DEFVAL { installed } ::= { ciscoFiconConfig 11 } -- -- FICON Link Incident Table -- cficonLinkIncidentTable OBJECT-TYPE SYNTAX SEQUENCE OF CficonLinkIncidentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table listing the link incidents in a FICON interface. A Link incident is an event when the interface experiences the conditions described in the cficonLinkIncident object." ::= { ciscoFiconConfig 12 } cficonLinkIncidentEntry OBJECT-TYPE SYNTAX CficonLinkIncidentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry listing the cficonLinkIncidentTable." INDEX { ifIndex } ::= { cficonLinkIncidentTable 1 } CficonLinkIncidentEntry ::= SEQUENCE { cficonLinkIncident INTEGER, cficonLinkIncidentTime DisplayString, cficonLinkIncidentClear INTEGER } cficonLinkIncident OBJECT-TYPE SYNTAX INTEGER { none(1), bitErrThreshExceeded(2), lossOfSignalOrSync(3), nosReceived(4), primitiveSeqTimeOut(5), invalidPrimitiveSeq(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of link incident that occurred on an interface. bitErrThreshExceeded - Bit Error Threshold exceeded. lossOfSignalOrSync - Loss of Signal or Sync message. nosReceived - NOS msg Received NOS - Non Operational State primitiveSeqTimeOut - Primitive Timeout invalidPrimitiveSeq - Invalid Primitive sequence " ::= { cficonLinkIncidentEntry 1 } cficonLinkIncidentTime OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The time at which the link incident happened. The format is as follows - Wed Nov 5 18:53:52.172485 2003 " ::= { cficonLinkIncidentEntry 2 } cficonLinkIncidentClear OBJECT-TYPE SYNTAX INTEGER { clear(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The object used to clear the link incident for an interface." ::= { cficonLinkIncidentEntry 3 } -- -- per vsan configuration file CUP Nametable -- cficonCfgFileCupNameTable OBJECT-TYPE SYNTAX SEQUENCE OF CficonCfgFileCupNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table listing the CUP names for each vsan in a configuration file." ::= { ciscoFiconConfig 13 } cficonCfgFileCupNameEntry OBJECT-TYPE SYNTAX CficonCfgFileCupNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A cficonCfgFileCupNameTable entry. Each entry provides the CUP name for a VSAN (identified by vsanIndex) and a file (identified by cficonCfgFilename). " INDEX { vsanIndex,cficonCfgFilename } ::= { cficonCfgFileCupNameTable 1 } CficonCfgFileCupNameEntry ::= SEQUENCE { cficonCfgFileCupName SnmpAdminString } cficonCfgFileCupName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..24)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of CUP." ::= { cficonCfgFileCupNameEntry 1 } -- -- Configuration copy table -- cficonConfigCopyTable OBJECT-TYPE SYNTAX SEQUENCE OF CficonConfigCopyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of config-copy requests." ::= { ciscoFiconConfig 14 } cficonConfigCopyEntry OBJECT-TYPE SYNTAX CficonConfigCopyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A config-copy request. A management station wishing to create an entry should first generate a random serial number to be used as the index to this sparse table. The station should then create the associated instance of the row status object. This config-copy operation is only to copy the running configuration to startup configuration for FICON. Once the appropriate instance of all the configuration objects have been created, either by an explicit SNMP set request or by default, the row status should be set to active to initiate the request. Note that this entire procedure may be initiated via a single set request which specifies a row status of createAndGo. Once the config-copy request has been created (i.e. the cfCopyEntryRowStatus has been made active), the entry cannot be modified - the only operation possible after this is to delete the row. Once the request completes, the management station should retrieve the value of the status object and should then delete the entry. In order to prevent old entries from clogging the table, entries will be aged out, but an entry will never be deleted within 5 minutes of completing." INDEX { cficonConfigCopyIndex } ::= { cficonConfigCopyTable 1 } CficonConfigCopyEntry ::= SEQUENCE { cficonConfigCopyIndex Unsigned32, cficonCopyState INTEGER, cficonCopyFailReason SnmpAdminString, cficonCopyEntryRowStatus RowStatus } cficonConfigCopyIndex OBJECT-TYPE SYNTAX Unsigned32(1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Object which specifies a unique entry in the cficonConfigCopyTable. A management station wishing to initiate a config-copy operation should use a random value for this object when creating an instance of a cficonConfigCopyEntry." ::= { cficonConfigCopyEntry 1 } cficonCopyState OBJECT-TYPE SYNTAX INTEGER { inProgress(1), success(2), failed(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the result of this config-copy request. This value of this object is instantiated only after the row has been instantiated, i.e. after the cficonCopyEntryRowStatus has been made active." ::= { cficonConfigCopyEntry 2 } cficonCopyFailReason OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "An error string describing the reason the copy failed." ::= { cficonConfigCopyEntry 3 } cficonCopyEntryRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry. Once the entry status is set to active, the associated entry cannot be modified until the request completes (cficonCopyState transitions to successful or failed state)." ::= { cficonConfigCopyEntry 4 } cficonAutoSaveState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The object indicates whether auto save state is enabled or disabled. Enabling the auto save state, saves the configuration to the configuration file whenever a configuration change is made. If the cficonAutoSaveState is disabled (false), the configuration change is not saved to the configuration file." DEFVAL { false } ::= { ciscoFiconConfig 15 } ciscoFiconPortMap OBJECT IDENTIFIER ::= { ciscoFiconConfig 16 } cficonPortMap1 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS deprecated -- deprecated by cficonPortMapObj DESCRIPTION "The port map1. This object contains information specific to third party vendor and the usage is vendor specific. Each record is 6 bytes long and there can be up to 42 records in this object. Each record consists of the following - 0-3 bytes - IfIndex byte 4 - Port Address byte 5 - Unit Type " ::= { ciscoFiconPortMap 1 } cficonPortMap2 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS deprecated -- deprecated by cficonPortMapObj DESCRIPTION "The port map2. This object contains information specific to third party vendor and the usage is vendor specific. Each record is 6 bytes long and there can be up to 42 records in this object. Each record consists of the following - 0-3 bytes - IfIndex byte 4 - Port Address byte 5 - Unit Type " ::= { ciscoFiconPortMap 2 } cficonPortMap3 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS deprecated -- deprecated by cficonPortMapObj DESCRIPTION "The port map3. This object contains information specific to third party vendor and the usage is vendor specific. Each record is 6 bytes long and there can be up to 42 records in this object. Each record consists of the following - 0-3 bytes - IfIndex byte 4 - Port Address byte 5 - Unit Type " ::= { ciscoFiconPortMap 3 } cficonPortMap4 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS deprecated -- deprecated by cficonPortMapObj DESCRIPTION "The port map4. This object contains information specific to third party vendor and the usage is vendor specific. Each record is 6 bytes long and there can be up to 42 records in this object. Each record consists of the following - 0-3 bytes - IfIndex byte 4 - Port Address byte 5 - Unit Type " ::= { ciscoFiconPortMap 4 } cficonPortMap5 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS deprecated -- deprecated by cficonPortMapObj DESCRIPTION "The port map5. This object contains information specific to third party vendor and the usage is vendor specific. Each record is 6 bytes long and there can be up to 42 records in this object. Each record consists of the following - 0-3 bytes - IfIndex byte 4 - Port Address byte 5 - Unit Type " ::= { ciscoFiconPortMap 5 } cficonPortMap6 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS deprecated -- deprecated by cficonPortMapObj DESCRIPTION "The port map6. This object contains information specific to third party vendor and the usage is vendor specific. Each record is 6 bytes long and there can be up to 42 records in this object. Each record consists of the following - 0-3 bytes - IfIndex byte 4 - Port Address byte 5 - Unit Type " ::= { ciscoFiconPortMap 6 } -- -- Port Map Object number -- cficonPortMapMax OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of port map objects." ::= { ciscoFiconPortMap 7 } -- -- Port Map Object Table -- cficonPortMapTable OBJECT-TYPE SYNTAX SEQUENCE OF CficonPortMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The port map table. This table contains the list of port map objects to carry the information of IfIndex, port Address, unit Type and Port Number for all ports. " ::= { ciscoFiconPortMap 8 } cficonPortMapEntry OBJECT-TYPE SYNTAX CficonPortMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The port map entry. This entry consists of a index number indicating a set of ports and a port map object carrying certain port attributes for these ports. " INDEX { cficonPortMapIndex } ::= { cficonPortMapTable 1 } CficonPortMapEntry ::= SEQUENCE { cficonPortMapIndex Integer32, cficonPortMapObj OCTET STRING } cficonPortMapIndex OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The port map index. This number indicates the group of ports described by the port map object. " ::= { cficonPortMapEntry 1 } cficonPortMapObj OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The port map object. This object contains information specific to third party vendor and the usage is vendor specific. Each record is 7 bytes long and there can be up to 36 records in this object. Each record consists of the following - 0-3 bytes - IfIndex byte 4 - Port Address byte 5 - Unit Type byte 6 - Port Number " ::= { cficonPortMapEntry 2 } -- -- Reserved Port Number Table For Physical Ports -- cficonSlotPortNumTable OBJECT-TYPE SYNTAX SEQUENCE OF CficonSlotPortNumEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Chassis slot port number table. This table contains the list of all reserved port numbers for all slots of the chassis. " ::= { ciscoFiconConfig 17 } cficonSlotPortNumEntry OBJECT-TYPE SYNTAX CficonSlotPortNumEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Chassis slot port number entry. This entry has the slot number and reserved port numbers for this slot. " INDEX { cficonSlotIndex } ::= { cficonSlotPortNumTable 1 } CficonSlotPortNumEntry ::= SEQUENCE { cficonSlotIndex Integer32, cficonSlotReservedPN OCTET STRING } cficonSlotIndex OBJECT-TYPE SYNTAX Integer32 (1..32) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The chassis slot number." ::= { cficonSlotPortNumEntry 1 } cficonSlotReservedPN OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Chassis slot port numbers. Reserved port numbers for one chassis slot. There can be up to 64 port numbers reserved for each slot in the chassis. " ::= { cficonSlotPortNumEntry 2 } -- -- Reserved Port Number Array For Logical Ports -- cficonLogicReservedPN OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "Reserved port numbers for logical ports. There can be up to 256 port numbers reserved for logical ports. " ::= { ciscoFiconConfig 18 } -- -- RLIR ERL table -- cficonRlirErlTable OBJECT-TYPE SYNTAX SEQUENCE OF CficonRlirErlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Nx_Ports that have registered to receive RLIRs on all VSANs on the local switch." ::= { ciscoFiconConfig 19 } cficonRlirErlEntry OBJECT-TYPE SYNTAX CficonRlirErlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) containing information about an Nx_Port which has registered to receive RLIRs on the VSAN indicated by vsanIndex." INDEX { vsanIndex, cficonRlirErlFcId, cficonRlirErlFormat } ::= { cficonRlirErlTable 1 } CficonRlirErlEntry ::= SEQUENCE { cficonRlirErlFcId FcAddressId, cficonRlirErlFormat Unsigned32, cficonRlirErlRegType INTEGER } cficonRlirErlFcId OBJECT-TYPE SYNTAX FcAddressId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Fibre Channel Identifier (FC-ID) of the subscribing Nx_Port." ::= { cficonRlirErlEntry 1 } cficonRlirErlFormat OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the device type for which the Nx_Port is interested in receiving RLIR ELS." ::= { cficonRlirErlEntry 2 } cficonRlirErlRegType OBJECT-TYPE SYNTAX INTEGER { conditionalRx(1), alwaysRx(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the type of registration desired by the subscriber. conditionalRx(1) - the Nx_Port is registered as a valid recipient of subsequent RLIRs. But such an Nx_Port is chosen as the recipient of a link incident record only if no other recipients from the ERL on this VSAN have been chosen. alwaysRx(2) - the Nx_Port is registered as a valid recipient of subsequent RLIRs. Such an Nx_Port is always chosen as a recipient of a link incident record." REFERENCE "Fibre Channel Framing and Signaling (FC-FS), Rev 1.70, Section 12.3.2.32" ::= { cficonRlirErlEntry 3 } -- -- FICON interface swap table -- cficonInterfaceSwapNextIndex OBJECT-TYPE SYNTAX Integer32(1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "Next unique index available for creating new entry in the FICON interface swap table." ::= {ciscoFiconConfig 21} cficonInterfaceSwapTable OBJECT-TYPE SYNTAX SEQUENCE OF CficonInterfaceSwapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table provides a management application with the capability to swap the configuration of two specified interfaces. In FICON, a host associates a great deal of configuration data with a port-address. If the FICON port connecting the host to the switch has some problem and the user wants to connect the host to a different port in the switch, one needs to swap the configuration of the two ports. This command transparently swaps the configuration of two ports without affecting the host. " ::= { ciscoFiconConfig 20 } cficonInterfaceSwapEntry OBJECT-TYPE SYNTAX CficonInterfaceSwapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A cficonInterfaceSwapTable entry contains 2 interface indices to be swapped among other objects. A management station wishing to create an entry should first obtain a unique serial number, e.g. get the cficonInterfaceSwapNextIndex scalar as the index to this sparse table. The station should then create the associated instance of the row status object. Note that when creating a row in this table, the cficonSwapPortEntryStatus, cficonSwapInterfaceIndexFirst and cficonSwapInterfaceIndexSecond are all required. The values of cficonSwapInterfaceIndexFirst and cficonSwapInterfaceIndexSecond should be different. If for any reason the new row can not be created, no swap action will be performed. If the table entry creation is successful, the value of cficonSwapInterfaceActionStatus will be pending(1) first and the SNMP response will be returned as success. When the swap starts, the value will be executing(2). After the swap action is done, the value will be either success(3) or failure(4). cficonSwapInterfaceFailReason contains the failure reason to indicate where the failure is from. cficonSwapInterfaceSystemError is a user readable description given by the failure causing sub-module. The management station should delete the entry after the value of cficonSwapInterfaceActionStatus being either success(3) or failure(4). " INDEX { cficonInterfaceSwapIndex } ::= { cficonInterfaceSwapTable 1 } CficonInterfaceSwapEntry ::= SEQUENCE { cficonInterfaceSwapIndex Integer32, cficonSwapInterfaceIndexFirst InterfaceIndex, cficonSwapInterfaceIndexSecond InterfaceIndex, cficonSwapInterfaceActionStatus INTEGER, cficonSwapInterfaceFailReason INTEGER, cficonSwapInterfaceSystemError SnmpAdminString, cficonSwapInterfaceEntryStatus RowStatus } cficonInterfaceSwapIndex OBJECT-TYPE SYNTAX Integer32(1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary index for the swap command." ::= {cficonInterfaceSwapEntry 1} cficonSwapInterfaceIndexFirst OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "The first port number that needs to be swapped ." ::= {cficonInterfaceSwapEntry 2} cficonSwapInterfaceIndexSecond OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-create STATUS current DESCRIPTION "The second port number that needs to be swapped." ::= {cficonInterfaceSwapEntry 3} cficonSwapInterfaceActionStatus OBJECT-TYPE SYNTAX INTEGER { pending(1), executing(2), success(3), failure(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the port swap request. pending - the request is waiting to be processed by the device. executing - the request is currently being processed by the device. success - the request has been completed successfully by the device. failure - the request failed." ::= {cficonInterfaceSwapEntry 4} cficonSwapInterfaceFailReason OBJECT-TYPE SYNTAX INTEGER { other(1), none(2), dmFailure(3), ficonFailure(4), pmFailure(5), psmFailure(6), qosFailure(7), spanFailure(8), zsFailure(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "The reason of failed port swap request other - the failure is caused by other sub-module. none - no failure. dmFailure - the failure is caused by Domain Manager. ficonFailure - the failure is caused by FICON Manager. pmFailure - the failure is caused by Port Manager. psmFailure - the failure is caused by Port Security Manager. qosFailure - the failure is caused by QOS sub-module. spanFailure - the failure is caused by SPAN sub-module. zsFailure - the failure is caused by Zone Server. " ::= {cficonInterfaceSwapEntry 5} cficonSwapInterfaceSystemError OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "A system error string readable by user for the failed swap action." ::= {cficonInterfaceSwapEntry 6} cficonSwapInterfaceEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "If this object is set to 'active(1)' then the port configurations of the ports specified by objects cficonSwapInterfaceIndexFirst and cficonSwapInterfaceIndexSecond will be swapped." ::= {cficonInterfaceSwapEntry 7} -- -- Notifications -- cficonPortInfoChange NOTIFICATION-TYPE OBJECTS { cficonRunCfgUnitType, ifIndex } STATUS current DESCRIPTION "A FICON Port Change notification is generated whenever the unit type of the port changes." ::= { ciscoFiconMIBNotifications 1 } -- -- Conformance -- ciscoFiconCompliances OBJECT IDENTIFIER ::= { ciscoFiconMIBConform 1 } ciscoFiconGroups OBJECT IDENTIFIER ::= { ciscoFiconMIBConform 2 } ciscoFiconCompliance MODULE-COMPLIANCE STATUS deprecated -- deprecated by ciscoFiconComplianceRev1 DESCRIPTION "Compliance statement for FICON MIB. " MODULE -- this module MANDATORY-GROUPS { cficonPortSwapGroup, cficonVsanGroup, cficonPortGroup, cficonPortRunCfgGroup, cficonCfgFileGroup, cficonPortNumIfGroup, cficonPortAddrNumGroup, cficonPortNumAddrGroup, cficonDirHistGroup, cficonStatsGroup, cifconShowPortGroup, cficonLinkIncidentGroup, cficonCfgFileCupNameGroup, cficonConfigCopyGroup, cficonAutoSaveStateGroup, cficonPortMapGroup, cficonNotificationGroup } OBJECT cficonVsanEntryStatus SYNTAX INTEGER { active(1), createAndGo(4), destroy(6)} DESCRIPTION "Only three values 'createAndGo', 'destroy' and 'active' out of the six enumerated values need to be supported." OBJECT cficonVsanEnableCup MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cficonVsanCharSet MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cficonCfgFileDescr MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { ciscoFiconCompliances 1 } ciscoFiconComplianceRev1 MODULE-COMPLIANCE STATUS deprecated -- deprecated by ciscoFiconComplianceRev2 DESCRIPTION "Compliance statement for FICON MIB. " MODULE -- this module MANDATORY-GROUPS { cficonPortSwapGroup, cficonVsanGroup, cficonPortGroup, cficonPortRunCfgGroup, cficonCfgFileGroup, cficonPortNumIfGroup, cficonPortAddrNumGroup, cficonPortNumAddrGroup, cficonDirHistGroup, cficonStatsGroup, cifconShowPortGroup, cficonLinkIncidentGroup, cficonCfgFileCupNameGroup, cficonConfigCopyGroup, cficonAutoSaveStateGroup, cficonNotificationGroup, cficonPortMapGroupRev1, cficonReservedPortNumGroup, cficonRlirErlGroup } OBJECT cficonVsanEntryStatus SYNTAX INTEGER { active(1), createAndGo(4), destroy(6)} DESCRIPTION "Only three values 'createAndGo', 'destroy' and 'active' out of the six enumerated values need to be supported." OBJECT cficonVsanEnableCup MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cficonVsanCharSet MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cficonCfgFileDescr MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { ciscoFiconCompliances 2 } ciscoFiconComplianceRev2 MODULE-COMPLIANCE STATUS deprecated -- deprecated by ciscoFiconComplianceRev3 DESCRIPTION "Compliance statement for FICON MIB. " MODULE -- this module MANDATORY-GROUPS { cficonPortSwapGroup, cficonVsanGroup, cficonPortGroup, cficonPortRunCfgGroup, cficonCfgFileGroup, cficonPortNumIfGroup, cficonPortAddrNumGroup, cficonPortNumAddrGroup, cficonDirHistGroup, cficonStatsGroup, cifconShowPortGroup, cficonLinkIncidentGroup, cficonCfgFileCupNameGroup, cficonConfigCopyGroup, cficonAutoSaveStateGroup, cficonNotificationGroup, cficonPortMapGroupRev1, cficonReservedPortNumGroup, cficonRlirErlGroup, cficonInterfaceSwapGroup } OBJECT cficonVsanEntryStatus SYNTAX INTEGER { active(1), createAndGo(4), destroy(6)} DESCRIPTION "Only three values 'createAndGo', 'destroy' and 'active' out of the six enumerated values need to be supported." OBJECT cficonVsanEnableCup MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cficonVsanCharSet MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cficonCfgFileDescr MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { ciscoFiconCompliances 3 } ciscoFiconComplianceRev3 MODULE-COMPLIANCE STATUS current DESCRIPTION "Compliance statement for FICON MIB. " MODULE -- this module MANDATORY-GROUPS { cficonPortSwapGroup, cficonVsanGroup, cficonPortGroup, cficonPortRunCfgGroup, cficonCfgFileGroup, cficonPortNumIfGroup, cficonPortAddrNumGroup, cficonPortNumAddrGroup, cficonDirHistGroup, cficonStatsGroup, cifconShowPortGroup, cficonLinkIncidentGroup, cficonCfgFileCupNameGroup, cficonConfigCopyGroup, cficonAutoSaveStateGroup, cficonNotificationGroup, cficonPortMapGroupRev1, cficonReservedPortNumGroup, cficonRlirErlGroup, cficonInterfaceSwapGroup, cficonDefaultPortBlockGroup } OBJECT cficonVsanEntryStatus SYNTAX INTEGER { active(1), createAndGo(4), destroy(6)} DESCRIPTION "Only three values 'createAndGo', 'destroy' and 'active' out of the six enumerated values need to be supported." OBJECT cficonVsanEnableCup MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cficonVsanCharSet MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cficonCfgFileDescr MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { ciscoFiconCompliances 4 } -- Units of Conformance cficonPortSwapGroup OBJECT-GROUP OBJECTS { cficonSwapPortNumberFirst, cficonSwapPortNumberSecond, cficonSwapPortEntryStatus } STATUS current DESCRIPTION "A collection of objects providing port swap functionality." ::= { ciscoFiconGroups 1 } cficonVsanGroup OBJECT-GROUP OBJECTS { cficonVsanHostControl, cficonVsanHostControlSwOffline, cficonVsanHostControlClkAlrtMode, cficonVsanSnmpControl, cficonVsanAutoSavePortAddrCfg, cficonVsanEnableCup, cficonVsanCodePage, cficonVsanCharSet, cficonVsanKeyCounter, cficonVsanUserAlertMode, cficonVsanDeviceAllegience, cficonVsanTime, cficonVsanHostOrDefaultTime, cficonVsanCupName, cficonSetHostTimeControl, cficonVsanClearAllegience, cficonVsanEntryStatus, cficonVsanFiconState, cficonVsanSerialNum } STATUS current DESCRIPTION "A group containing objects providing ficon information in a vsan." ::= { ciscoFiconGroups 2 } cficonPortGroup OBJECT-GROUP OBJECTS { cficonPortBlock, cficonPortName, cficonProhibitPortNumbers } STATUS current DESCRIPTION "A group containing an object providing ficon port information." ::= { ciscoFiconGroups 3 } cficonPortRunCfgGroup OBJECT-GROUP OBJECTS { cficonPortRunCfgBlock, cficonPortRunCfgName, cficonRunCfgProhibitPrtNums, cficonRunCfgTypeNumber, cficonRunCfgModelNumber, cficonRunCfgManufacturer, cficonRunCfgPlantOfMfg, cficonRunCfgSerialNumber, cficonRunCfgUnitType, cficonRunCfgPortId, cficonRunCfgStatus } STATUS current DESCRIPTION "A group containing an object providing ficon port information." ::= { ciscoFiconGroups 4 } cficonCfgFileGroup OBJECT-GROUP OBJECTS { cficonCfgFileDescr, cficonCfgFileStatus, cficonCfgFileLastUpdated, cficonCfgFileCmd, cficonCfgFileRowStatus, cficonCfgFileCmdStatus, cficonCfgFileCmdErrorString } STATUS current DESCRIPTION "A collection of objects for the per VSAN config file table." ::= { ciscoFiconGroups 5 } cficonPortNumIfGroup OBJECT-GROUP OBJECTS { cficonPortIfIndex } STATUS current DESCRIPTION "A collection of objects giving association of a Port Number to Interface Index of the Port." ::= { ciscoFiconGroups 6 } cficonPortAddrNumGroup OBJECT-GROUP OBJECTS { cficonPortAddrPortNumber } STATUS current DESCRIPTION "A collection of objects giving association of a port address to port number and interface index of the port." ::= { ciscoFiconGroups 7 } cficonPortNumAddrGroup OBJECT-GROUP OBJECTS { portAddress } STATUS current DESCRIPTION "A collection of objects for the port number to port Address translation table." ::= { ciscoFiconGroups 8 } cficonDirHistGroup OBJECT-GROUP OBJECTS { cficonDirHistPortNumbers } STATUS current DESCRIPTION "A collection of objects for the Director History table." ::= { ciscoFiconGroups 9 } cficonStatsGroup OBJECT-GROUP OBJECTS { cfStatsFramePacingTime, cfStatsDispErrorsInFrame, cfStatsEOFErrs, cfStatsDispErrsOutOfFrame, cfStatsInvalidOrderSets, cfStatsErrorSummary } STATUS current DESCRIPTION "A collection of objects for the FICON statistics table." ::= { ciscoFiconGroups 10 } cifconShowPortGroup OBJECT-GROUP OBJECTS { cficonShowPorts } STATUS current DESCRIPTION "A collection of objects for the FICON statistics table." ::= { ciscoFiconGroups 11 } cficonLinkIncidentGroup OBJECT-GROUP OBJECTS { cficonLinkIncident, cficonLinkIncidentTime, cficonLinkIncidentClear } STATUS current DESCRIPTION "A collection of objects for the FICON incidents table." ::= { ciscoFiconGroups 12 } cficonCfgFileCupNameGroup OBJECT-GROUP OBJECTS { cficonCfgFileCupName } STATUS current DESCRIPTION "A collection of objects for the FICON CUP name for the vsan in the configuration files." ::= { ciscoFiconGroups 13 } cficonConfigCopyGroup OBJECT-GROUP OBJECTS { cficonCopyState, cficonCopyFailReason, cficonCopyEntryRowStatus } STATUS current DESCRIPTION "A collection of objects for the FICON configuration copy operation." ::= { ciscoFiconGroups 14 } cficonAutoSaveStateGroup OBJECT-GROUP OBJECTS { cficonAutoSaveState } STATUS current DESCRIPTION "A collection of objects for the FICON configuration copy auto save operation." ::= { ciscoFiconGroups 15 } cficonPortMapGroup OBJECT-GROUP OBJECTS { cficonPortMap1, cficonPortMap2, cficonPortMap3, cficonPortMap4, cficonPortMap5, cficonPortMap6 } STATUS deprecated -- deprecated by cficonPortMapGroupRev1 DESCRIPTION "A collection of objects for the FICON port maps." ::= { ciscoFiconGroups 16 } cficonNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { cficonPortInfoChange } STATUS current DESCRIPTION "A collection of FICON notifications." ::= { ciscoFiconGroups 17 } cficonPortMapGroupRev1 OBJECT-GROUP OBJECTS { cficonPortMapMax, cficonPortMapObj } STATUS current DESCRIPTION "A collection of objects for the FICON port maps." ::= { ciscoFiconGroups 18 } cficonReservedPortNumGroup OBJECT-GROUP OBJECTS { cficonSlotReservedPN, cficonLogicReservedPN } STATUS current DESCRIPTION "A collection of objects for the reserved FICON port numbers." ::= { ciscoFiconGroups 19 } cficonRlirErlGroup OBJECT-GROUP OBJECTS { cficonRlirErlRegType } STATUS current DESCRIPTION "A collection of objects for displaying RLIR ERL." ::= { ciscoFiconGroups 20 } cficonInterfaceSwapGroup OBJECT-GROUP OBJECTS { cficonSwapInterfaceIndexFirst, cficonSwapInterfaceIndexSecond, cficonSwapInterfaceActionStatus, cficonSwapInterfaceFailReason, cficonSwapInterfaceSystemError, cficonSwapInterfaceEntryStatus, cficonInterfaceSwapNextIndex } STATUS current DESCRIPTION "A collection of objects providing port swap functionality." ::= { ciscoFiconGroups 21 } cficonDefaultPortBlockGroup OBJECT-GROUP OBJECTS { cficonDefaultPortBlock } STATUS current DESCRIPTION "A collection of objects providing default port block state." ::= { ciscoFiconGroups 22 } END