-- ***************************************************************** -- CISCO-VIRTUAL-SWITCH-MIB -- -- Definitions of managed objects supporting Virtual Switch. -- -- Frank Chao -- -- Copyright (c) 2006-2012 by cisco Systems, Inc. -- All rights reserved. -- ***************************************************************** CISCO-VIRTUAL-SWITCH-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE, Unsigned32, Counter32, Counter64 FROM SNMPv2-SMI MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP FROM SNMPv2-CONF TEXTUAL-CONVENTION, RowStatus, TimeStamp, DateAndTime, TruthValue FROM SNMPv2-TC entPhysicalIndex FROM ENTITY-MIB SnmpAdminString FROM SNMP-FRAMEWORK-MIB InterfaceIndex FROM IF-MIB ciscoMgmt FROM CISCO-SMI; ciscoVirtualSwitchMIB MODULE-IDENTITY LAST-UPDATED "201204100000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 Tel: +1 800 553-NETS cs-lan-switch-snmp@cisco.com" DESCRIPTION "This MIB module defines the managed objects that support the virtual switch architecture. The virtual switch concept combines several individual distributed physical switches together to build a single logical management point. The core switches are the control point for a virtual switch, all the traffic is forwarded and distributed in the core switches, including control and data traffic. The core switches are connected through a dedicated ether channel called Virtual Switch Link (VSL) that is used for both control traffic as well as some data traffic to provide the traffic load sharing and switch redundancy between the physical chassis. One or multiple core switches can be supported in the virtual switch architecture, but only one core called 'active core' switch can be active to manage the traffic. The other is called 'standby core' switch as redundancy if there is. The concept of virtual switch is to collect many physical switches chassis together to form a single management unit to simplify the whole network architecture." REVISION "201204100000" DESCRIPTION "Added cSSO(3) enum value to cvsModuleRprWarm object Added following OBJECT-GROUP - cvsCoreSwitchLocationGroup - cvsDualActiveDetectionNotifsControlGroup - cvsDualActiveDetectionNotifsInfoGroup - cvsDualActiveDetectionNotifsGroup Added new compliance - cvsMIBComplianceV03" REVISION "201001210000Z" DESCRIPTION "New group cvsVSLStatisticsExtGroup and cvsVssModuleStandbyGroup are added." REVISION "200709250000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 388 } ciscoVirtualSwitchMIBNotifs OBJECT IDENTIFIER ::= { ciscoVirtualSwitchMIB 0 } ciscoVirtualSwitchMIBObjects OBJECT IDENTIFIER ::= { ciscoVirtualSwitchMIB 1 } ciscoVirtualSwitchMIBConform OBJECT IDENTIFIER ::= { ciscoVirtualSwitchMIB 2 } -- TEXTUAL-CONVENTION VSSwitchID ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "An integer value that uniquely identifies a physical chassis in the virtual switch architecture. 0 means no switch ID configured for this switch. It implies the switch is in the standalone mode and not part of the virtual switch architecture." SYNTAX Unsigned32 VSSwitchCapability ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indication of the switch roles that can be supported on the chassis device. standalone : it means this chassis device can be a regular switch which is not a part of virtual switch architecture. core : it means this chassis device can be a core switch, active or standby, in the virtual switch architecture." SYNTAX BITS { standalone(0), core(1) } VSSwitchMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The switch mode of the chassis device in the virtual switch environment or a chassis can also be a standalone device. standalone : it means this chassis device is not in a part of the virtual switch environment, it is a standalone switch. multiNode: it means this chassis device is in a part of the virtual switch environment. Only a switch with the capability to be a 'core' switch could be configured to multiNode(2)." SYNTAX INTEGER { standalone(1), multiNode(2) } VSSwitchRole ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The role of the chassis device. standalone : it means this chassis device is not a part of the virtual switch, it is a standalone switch. active : it means this chassis device is an active core switch in the virtual switch architecture. standby : it means this chassis device is a standby core switch in the virtual switch architecture." SYNTAX INTEGER { standalone(1), active(2), standby(3) } VSConnectStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A textual convention to indicate the connection status of a link." SYNTAX INTEGER { up(1), down(2) } cvsGlobalObjects OBJECT IDENTIFIER ::= { ciscoVirtualSwitchMIBObjects 1 } cvsChassisObjects OBJECT IDENTIFIER ::= { ciscoVirtualSwitchMIBObjects 2 } cvsVSLObjects OBJECT IDENTIFIER ::= { ciscoVirtualSwitchMIBObjects 3 } cvsModuleObjects OBJECT IDENTIFIER ::= { ciscoVirtualSwitchMIBObjects 4 } cvsDualActiveDetection OBJECT IDENTIFIER ::= { ciscoVirtualSwitchMIBObjects 5 } -- Virtual Switch global objects cvsDomain OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The virtual switch domain identifier to recognize a virtual switch domain. Only Switches with the same domain number can be in the same virtual switch. 0 means no switch domain configured." ::= { cvsGlobalObjects 1 } cvsSwitchID OBJECT-TYPE SYNTAX VSSwitchID MAX-ACCESS read-write STATUS current DESCRIPTION "The unique ID which is assigned to the current switch for identifying this physical chassis as a core switch in the virtual switch architecture. 0 means no switch ID configured." ::= { cvsGlobalObjects 2 } cvsSwitchCapability OBJECT-TYPE SYNTAX VSSwitchCapability MAX-ACCESS read-only STATUS current DESCRIPTION "The capability of the switch can be. A physical chassis can be a standalone switch in the normal environment or a switch which is part of the virtual switch architecture." ::= { cvsGlobalObjects 3 } cvsSwitchMode OBJECT-TYPE SYNTAX VSSwitchMode MAX-ACCESS read-write STATUS current DESCRIPTION "Converting a standalone switch in the regular switch architecture to a switch in the virtual switch architecture. Or converting a switch in the virtual switch architecture to a standalone switch in the regular switch architecture. And the value of this object can only be set to one of mode where the corresponding bits in cvsSwitchCapability is set. To prevent vague switch status, this action will not only change the switch mode, but also reload the device automatically to activate to the new switch mode." ::= { cvsGlobalObjects 4 } cvsSwitchConvertingStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicating whether the switch is in the process of converting the mode of switch which is specified in the object cvsSwitchMode. true(1) : the switch is in converting the switch mode. false(2) : the switch is not in converting the switch mode." ::= { cvsGlobalObjects 5 } cvsVSLChangeNotifEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the generation of cvsVSLConnectionChangeNotif notification." ::= { cvsGlobalObjects 6 } -- Virtual Switch core chassis configuration table cvsCoreSwitchConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF CvsCoreSwitchConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table describes the configuration information for the core switches to select the active or standby core switches in the virtual switch architecture. If cvsDomain or cvsSwitchID objects are configured to 0, this table is not instantiated." ::= { cvsChassisObjects 1 } cvsCoreSwitchConfigEntry OBJECT-TYPE SYNTAX CvsCoreSwitchConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry describes the configuration for a core switch information in the virtual switch architecture." INDEX { cvsCoreSwitchID } ::= { cvsCoreSwitchConfigTable 1 } CvsCoreSwitchConfigEntry ::= SEQUENCE { cvsCoreSwitchID VSSwitchID, cvsCoreSwitchPriority Unsigned32, cvsCoreSwitchPreempt TruthValue, cvsCoreSwitchLocation SnmpAdminString } cvsCoreSwitchID OBJECT-TYPE SYNTAX VSSwitchID MAX-ACCESS not-accessible STATUS current DESCRIPTION "The switch number as an identifier for a core switch. If the priority value is the same, the higher switch number has the precedence to be the active core switch." ::= { cvsCoreSwitchConfigEntry 1 } cvsCoreSwitchPriority OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The configured priority information for this core switch. This priority value will be used to choose active or standby core switch. The core switch with the higher numerical value will be more desirable to be chosen as an active core switch." ::= { cvsCoreSwitchConfigEntry 2 } cvsCoreSwitchPreempt OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The configured preemption information for this core switch. This configuration will enable or disable the preemption of choosing the active core with higher priority." ::= { cvsCoreSwitchConfigEntry 3 } cvsCoreSwitchLocation OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-write STATUS current DESCRIPTION "The configured location for this core switch." ::= { cvsCoreSwitchConfigEntry 4 } -- Virtual Switch chassis table cvsChassisTable OBJECT-TYPE SYNTAX SEQUENCE OF CvsChassisEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table describes the information of the devices listed in the ENTITY-MIB entPhysicalTable in the virtual switch architecture, whose entPhysicalClass is chassis(3). This table will only be instantiated when the value of cvsSwitchMode is 'multiNode' in the virtual switch architecture." ::= { cvsChassisObjects 2 } cvsChassisEntry OBJECT-TYPE SYNTAX CvsChassisEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry describes the present chassis information in the virtual switch architecture." INDEX { entPhysicalIndex } ::= { cvsChassisTable 1 } CvsChassisEntry ::= SEQUENCE { cvsChassisSwitchID VSSwitchID, cvsChassisRole VSSwitchRole, cvsChassisUpTime TimeStamp } cvsChassisSwitchID OBJECT-TYPE SYNTAX VSSwitchID MAX-ACCESS read-only STATUS current DESCRIPTION "The unique switch ID which is assigned for identifying a chassis in the virtual switch architecture." ::= { cvsChassisEntry 1 } cvsChassisRole OBJECT-TYPE SYNTAX VSSwitchRole MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the role of this chassis in the virtual switch architecture." ::= { cvsChassisEntry 2 } cvsChassisUpTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The time (in hundredths of a second) since the chassis device was last re-initialized." ::= { cvsChassisEntry 3 } -- VSL (Virtual Switch Link) tables cvsVSLConnectionTable OBJECT-TYPE SYNTAX SEQUENCE OF CvsVSLConnectionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the VSLs (Virtual Switch Link) connection information of the core switches. A bundle link is a collection of two or more physical point-to-point links which are combined to form one logical link. A VSL is a bundle link which spans the core switch to connect to another core switch in the virtual switch." ::= { cvsVSLObjects 1 } cvsVSLConnectionEntry OBJECT-TYPE SYNTAX CvsVSLConnectionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry contains connections information of the VSL channel interfaces between the core switches." INDEX { cvsVSLChannelIfindex } ::= { cvsVSLConnectionTable 1 } CvsVSLConnectionEntry ::= SEQUENCE { cvsVSLChannelIfindex InterfaceIndex, cvsVSLCoreSwitchID VSSwitchID, cvsVSLConnectOperStatus VSConnectStatus, cvsVSLLastConnectionStateChange DateAndTime, cvsVSLConfiguredPortCount Unsigned32, cvsVSLOperationalPortCount Unsigned32, cvsVSLConnectionRowStatus RowStatus } cvsVSLChannelIfindex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interface index of the VSL channel interface in the core switch to be used for the VSL." ::= { cvsVSLConnectionEntry 1 } cvsVSLCoreSwitchID OBJECT-TYPE SYNTAX VSSwitchID MAX-ACCESS read-create STATUS current DESCRIPTION "The switch ID will be used to form the VSL." ::= { cvsVSLConnectionEntry 2 } cvsVSLConnectOperStatus OBJECT-TYPE SYNTAX VSConnectStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the operational status of the VSL connection." ::= { cvsVSLConnectionEntry 3 } cvsVSLLastConnectionStateChange OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The last time when the VSL connection was changed from up to down or down to up." ::= { cvsVSLConnectionEntry 4 } cvsVSLConfiguredPortCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of configured ports for this VSL." ::= { cvsVSLConnectionEntry 5 } cvsVSLOperationalPortCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of operational ports for this VSL." ::= { cvsVSLConnectionEntry 6 } cvsVSLConnectionRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is a conceptual row entry that allows creating or removing entries in or from the cvsVSLConnectionTable. Creating an entry in this table means building the VSL connection and removing an entry means to remove the VSL connection." ::= { cvsVSLConnectionEntry 7 } -- VSL statistics table cvsVSLStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CvsVSLStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the VSL (Virtual Switch Link) connection statistics information between the core switches in the virtual switch architecture. This table will only show the statistics information for the channel interface in the active core switch." ::= { cvsVSLObjects 2 } cvsVSLStatsEntry OBJECT-TYPE SYNTAX CvsVSLStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry contains transmitting and receiving statistics information of the VSL channel interface in the active core switch." INDEX { cvsVSLChannelIfindex } ::= { cvsVSLStatsTable 1 } CvsVSLStatsEntry ::= SEQUENCE { cvsVSLTxTotalPkts Counter32, cvsVSLTxErrorPkts Counter32, cvsVSLTxChksumErrPkts Counter32, cvsVSLRxTotalPkts Counter32, cvsVSLRxErrorPkts Counter32, cvsVSLRxChksumErrPkts Counter32, cvsVSLTxLmpPkts Counter64, cvsVSLTxRrpPkts Counter64, cvsVSLTxPingPkts Counter64, cvsVSLTxProtoPkts Counter64, cvsVSLTxDataPkts Counter64, cvsVSLTxAckPkts Counter64, cvsVSLRxLmpPkts Counter64, cvsVSLRxRrpPkts Counter64, cvsVSLRxPingPkts Counter64, cvsVSLRxProtoPkts Counter64, cvsVSLRxDataPkts Counter64, cvsVSLRxAckPkts Counter64, cvsVSLTxTotalEobcPkts Counter64, cvsVSLTxLmpEobcPkts Counter64, cvsVSLTxRrpEobcPkts Counter64, cvsVSLTxPingEobcPkts Counter64, cvsVSLTxProtoEobcPkts Counter64, cvsVSLTxDataEobcPkts Counter64, cvsVSLTxAckEobcPkts Counter64, cvsVSLRxTotalEobcPkts Counter64, cvsVSLRxLmpEobcPkts Counter64, cvsVSLRxRrpEobcPkts Counter64, cvsVSLRxPingEobcPkts Counter64, cvsVSLRxProtoEobcPkts Counter64, cvsVSLRxDataEobcPkts Counter64, cvsVSLRxAckEobcPkts Counter64, cvsVSLTxTotalHCPkts Counter64, cvsVSLTxErrorHCPkts Counter64, cvsVSLTxChksumErrHCPkts Counter64, cvsVSLRxTotalHCPkts Counter64, cvsVSLRxErrorHCPkts Counter64, cvsVSLRxChksumErrHCPkts Counter64 } cvsVSLTxTotalPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of transmitted packets." ::= { cvsVSLStatsEntry 1 } cvsVSLTxErrorPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transmitted error packets." ::= { cvsVSLStatsEntry 2 } cvsVSLTxChksumErrPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transmitted packets with checksum error." ::= { cvsVSLStatsEntry 3 } cvsVSLRxTotalPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of received packets." ::= { cvsVSLStatsEntry 4 } cvsVSLRxErrorPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received error packets." ::= { cvsVSLStatsEntry 5 } cvsVSLRxChksumErrPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received packets with checksum error." ::= { cvsVSLStatsEntry 6 } cvsVSLTxLmpPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transmitted LMP (Link Maintenance Protocol) packets." ::= { cvsVSLStatsEntry 7 } cvsVSLTxRrpPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transmitted RRP (Role Resolution Protocol) packets." ::= { cvsVSLStatsEntry 8 } cvsVSLTxPingPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transmitted VSL PING packets." ::= { cvsVSLStatsEntry 9 } cvsVSLTxProtoPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transmitted protocol packets, such as ISSU's (In Service software Upgrade) protocol." ::= { cvsVSLStatsEntry 10 } cvsVSLTxDataPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transmitted data packets, such as ISSU's ." ::= { cvsVSLStatsEntry 11 } cvsVSLTxAckPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transmitted ACK (Acknowledge) packets." ::= { cvsVSLStatsEntry 12 } cvsVSLRxLmpPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received LMP packets." ::= { cvsVSLStatsEntry 13 } cvsVSLRxRrpPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received RRP packets." ::= { cvsVSLStatsEntry 14 } cvsVSLRxPingPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received VSL PING packets." ::= { cvsVSLStatsEntry 15 } cvsVSLRxProtoPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received ISSU's protocol packets." ::= { cvsVSLStatsEntry 16 } cvsVSLRxDataPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received ISSU's data packets." ::= { cvsVSLStatsEntry 17 } cvsVSLRxAckPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received ACK packets." ::= { cvsVSLStatsEntry 18 } cvsVSLTxTotalEobcPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of transmitted EOBC (Ethernet Out-of-Band Channel) packets." ::= { cvsVSLStatsEntry 19 } cvsVSLTxLmpEobcPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transmitted LMP EOBC packets." ::= { cvsVSLStatsEntry 20 } cvsVSLTxRrpEobcPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transmitted RRP EOBC packets." ::= { cvsVSLStatsEntry 21 } cvsVSLTxPingEobcPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transmitted VSL PING EOBC packets." ::= { cvsVSLStatsEntry 22 } cvsVSLTxProtoEobcPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transmitted ISSU's protocol EOBC packets." ::= { cvsVSLStatsEntry 23 } cvsVSLTxDataEobcPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transmitted ISSU's data EOBC packets." ::= { cvsVSLStatsEntry 24 } cvsVSLTxAckEobcPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transmitted ACK EOBC packets." ::= { cvsVSLStatsEntry 25 } cvsVSLRxTotalEobcPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of received EOBC packets." ::= { cvsVSLStatsEntry 26 } cvsVSLRxLmpEobcPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received LMP EOBC packets." ::= { cvsVSLStatsEntry 27 } cvsVSLRxRrpEobcPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received RRP EOBC packets." ::= { cvsVSLStatsEntry 28 } cvsVSLRxPingEobcPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received VSL PING EOBC packets." ::= { cvsVSLStatsEntry 29 } cvsVSLRxProtoEobcPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received ISSU's protocol EOBC packets." ::= { cvsVSLStatsEntry 30 } cvsVSLRxDataEobcPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received ISSU's data EOBC packets." ::= { cvsVSLStatsEntry 31 } cvsVSLRxAckEobcPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received ACK EOBC packets." ::= { cvsVSLStatsEntry 32 } cvsVSLTxTotalHCPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The high capacity counter for the total number of transmitted packets." ::= { cvsVSLStatsEntry 33 } cvsVSLTxErrorHCPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The high capacity counter for the total number of transmitted error packets." ::= { cvsVSLStatsEntry 34 } cvsVSLTxChksumErrHCPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The high capacity counter for the number of transmitted packets with checksum error." ::= { cvsVSLStatsEntry 35 } cvsVSLRxTotalHCPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The high capacity counter for the total number of received packets." ::= { cvsVSLStatsEntry 36 } cvsVSLRxErrorHCPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The high capacity counter for the number of received error packets." ::= { cvsVSLStatsEntry 37 } cvsVSLRxChksumErrHCPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The high capacity counter for the number of received received packets with checksum error." ::= { cvsVSLStatsEntry 38 } -- VSL Port statistics table cvsVSLPortStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CvsVSLPortStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the statistics information for the configured physical ports of the VSL (Virtual Switch Link) connection in the active core switch." ::= { cvsVSLObjects 3 } cvsVSLPortStatsEntry OBJECT-TYPE SYNTAX CvsVSLPortStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry contains transmitting and receiving statistics information for a configured physical port of the VSL channel interface in the active core switch." INDEX { cvsVSLChannelIfindex, cvsVSLPortStatsIfindex } ::= { cvsVSLPortStatsTable 1 } CvsVSLPortStatsEntry ::= SEQUENCE { cvsVSLPortStatsIfindex InterfaceIndex, cvsVSLPortTxOkPkts Counter32, cvsVSLPortTxFailPkts Counter32, cvsVSLPortRxBidirPkts Counter32, cvsVSLPortRxUnidirPkts Counter32, cvsVSLPortRxFailPkts Counter32, cvsVSLPortRxBadPkts Counter32, cvsVSLPortRxMyInfoMismatchPkts Counter32, cvsVSLPortRxMyInfoAbsentPkts Counter32, cvsVSLPortRxBadMacAddressPkts Counter32, cvsVSLPortRxBadSwitchIdPkts Counter32, cvsVSLPortRxDomainIdMismatchPkts Counter32, cvsVSLPortRxPeerInfoMismatchPkts Counter32 } cvsVSLPortStatsIfindex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interface index for the configured physical port in the VSL." ::= { cvsVSLPortStatsEntry 1 } cvsVSLPortTxOkPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transmitted packets without errors for the port." ::= { cvsVSLPortStatsEntry 2 } cvsVSLPortTxFailPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transmitted packets that had local sending failures, such as out of buffers and other internal errors for the port." ::= { cvsVSLPortStatsEntry 3 } cvsVSLPortRxBidirPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received packets indicating a bidirectional link for the port." ::= { cvsVSLPortStatsEntry 4 } cvsVSLPortRxUnidirPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received packets that do not indicate a bidirectional link for the port." ::= { cvsVSLPortStatsEntry 5 } cvsVSLPortRxFailPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received packets with incorrect data for the port." ::= { cvsVSLPortStatsEntry 6 } cvsVSLPortRxBadPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received packets with in invalid states for the port." ::= { cvsVSLPortStatsEntry 7 } cvsVSLPortRxMyInfoMismatchPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received packets with mismatched local switch information for the port." ::= { cvsVSLPortStatsEntry 8 } cvsVSLPortRxMyInfoAbsentPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received packets without local switch information for the port." ::= { cvsVSLPortStatsEntry 9 } cvsVSLPortRxBadMacAddressPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received packets with bad MAC addresses information for the port." ::= { cvsVSLPortStatsEntry 10 } cvsVSLPortRxBadSwitchIdPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received packets with bad switch IDs information for the port." ::= { cvsVSLPortStatsEntry 11 } cvsVSLPortRxDomainIdMismatchPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received packets with mismatched domain IDs information for the port." ::= { cvsVSLPortStatsEntry 12 } cvsVSLPortRxPeerInfoMismatchPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received packets with mismatched peer information for the port." ::= { cvsVSLPortStatsEntry 13 } -- Virtual Switch module table cvsModuleTable OBJECT-TYPE SYNTAX SEQUENCE OF CvsModuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table describes the information of the physical modules listed in the ENTITY-MIB entPhysicalTable, whose entPhysicalClass is module(9). This table only contains physical linecards, no sub-linecards or port level module entities." ::= { cvsModuleObjects 1 } cvsModuleEntry OBJECT-TYPE SYNTAX CvsModuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry describes the present physical module information." INDEX { entPhysicalIndex } ::= { cvsModuleTable 1 } CvsModuleEntry ::= SEQUENCE { cvsModuleVSSupported TruthValue, cvsModuleVSLCapable TruthValue, cvsModuleSlotNumber Unsigned32, cvsModuleRprWarm INTEGER } cvsModuleVSSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The physical module is supported in the virtual switch architecture or not." ::= { cvsModuleEntry 1 } cvsModuleVSLCapable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The physical module has the capability to build the VSL connection between 2 core switches in the virtual switch architecture or not. If any physical port in this physical module is with the capability to build the VSL connection, it means this module is VSL capable." ::= { cvsModuleEntry 2 } cvsModuleSlotNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The module slot number for this physical module. If it is in the virtual switch environment, this object returns virtual slot number. If it is in the standalone environment, this object returns physical slot number." ::= { cvsModuleEntry 3 } cvsModuleRprWarm OBJECT-TYPE SYNTAX INTEGER { notApplicable(1), rprWarm(2), cSSO(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The object indicates in-chassis standby supervisor module's redundancy state in a VS environment. 'notApplicable' : the module is not applicable for the rest of states. 'rprWarm' : the module is the in-chassis standby supervisor in rpr warm state running as a DFC (Distributed Forwarding Card). 'cSSO' : the module is the in-chassis hot standby supervisor" ::= { cvsModuleEntry 4 } -- Virtual Switch Dual Active Detection cvsDualActiveDetectionNotifEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the generation of cvsDualActiveDetectionNotif notification." ::= { cvsDualActiveDetection 1 } cvsDualActiveDetectionInformation OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object provides information about the dual active notification cvsDualActiveDetectionNotif, i.e., the cause of dual-active, the detection method." ::= { cvsDualActiveDetection 2 } -- Notifications objects cvsVSLConnectionChangeNotif NOTIFICATION-TYPE OBJECTS { cvsVSLConnectOperStatus } STATUS current DESCRIPTION "The notification will be generated when the state of the VSL connection is changed." ::= { ciscoVirtualSwitchMIBNotifs 1 } cvsDualActiveDetectionNotif NOTIFICATION-TYPE OBJECTS { cvsSwitchID, cvsDualActiveDetectionInformation } STATUS current DESCRIPTION "The notification will be generated when dual-active is detected." ::= { ciscoVirtualSwitchMIBNotifs 2 } -- Conformance cvsMIBCompliances OBJECT IDENTIFIER ::= { ciscoVirtualSwitchMIBConform 1 } cvsMIBGroups OBJECT IDENTIFIER ::= { ciscoVirtualSwitchMIBConform 2 } -- Compliance cvsMIBCompliance MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the CISCO-VIRTUAL-SWITCH-MIB." MODULE -- this module MANDATORY-GROUPS { cvsGlobalGroup, cvsModuleGroup } GROUP cvsCoreSwitchGroup DESCRIPTION "This group contains the selection information of the active or standby core switches in the virtual switch environment. This is only mandatory for the managed system with supporting the configuring information of core switches." GROUP cvsChassisGroup DESCRIPTION "This group contains physical chassis information in the virtual switch environment. This is only mandatory for the managed system in the virtual switch environment." GROUP cvsVSLConnectionGroup DESCRIPTION "This is the group to construct the VSL (Virtual switch link) connection between core switches in the virtual switch architecture and also provide the information for the VSL. This is only mandatory for the managed system with supporting the configuration of VSL." GROUP cvsVSLStatisticsGroup DESCRIPTION "This group contains the VSL (Virtual switch link) statistics information in the virtual switch environment. This is only mandatory for the managed system in the virtual switch environment." GROUP cvsConnectionNotifsGroup DESCRIPTION "The notifications for VSL connection status. This is only mandatory for the managed system in the virtual switch environment." ::= { cvsMIBCompliances 1 } cvsMIBComplianceV02 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the CISCO-VIRTUAL-SWITCH-MIB." MODULE -- this module MANDATORY-GROUPS { cvsGlobalGroup, cvsModuleGroup, cvsVssModuleStandbyGroup } GROUP cvsCoreSwitchGroup DESCRIPTION "This group contains the selection information of the active or standby core switches in the virtual switch environment. This is only mandatory for the managed system with supporting the configuring information of core switches." GROUP cvsChassisGroup DESCRIPTION "This group contains physical chassis information in the virtual switch environment. This is only mandatory for the managed system in the virtual switch environment." GROUP cvsVSLConnectionGroup DESCRIPTION "This is the group to construct the VSL (Virtual switch link) connection between core switches in the virtual switch architecture and also provide the information for the VSL. This is only mandatory for the managed system with supporting the configuration of VSL." GROUP cvsVSLStatisticsGroup DESCRIPTION "This group contains the VSL (Virtual switch link) statistics information in the virtual switch environment. This is only mandatory for the managed system in the virtual switch environment." GROUP cvsConnectionNotifsGroup DESCRIPTION "The notifications for VSL connection status. This is only mandatory for the managed system in the virtual switch environment." GROUP cvsVSLStatisticsExtGroup DESCRIPTION "This group contains the VSL (Virtual switch link) more detail statistics information in the virtual switch environment. This is only mandatory for the managed system in the virtual switch environment." ::= { cvsMIBCompliances 2 } cvsMIBComplianceV03 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the CISCO-VIRTUAL-SWITCH-MIB." MODULE -- this module MANDATORY-GROUPS { cvsGlobalGroup, cvsModuleGroup, cvsVssModuleStandbyGroup } GROUP cvsCoreSwitchGroup DESCRIPTION "This group contains the selection information of the active or standby core switches in the virtual switch environment. This is only mandatory for the managed system with supporting the configuring information of core switches." GROUP cvsChassisGroup DESCRIPTION "This group contains physical chassis information in the virtual switch environment. This is only mandatory for the managed system in the virtual switch environment." GROUP cvsVSLConnectionGroup DESCRIPTION "This is the group to construct the VSL (Virtual switch link) connection between core switches in the virtual switch architecture and also provide the information for the VSL. This is only mandatory for the managed system with supporting the configuration of VSL." GROUP cvsVSLStatisticsGroup DESCRIPTION "This group contains the VSL (Virtual switch link) statistics information in the virtual switch environment. This is only mandatory for the managed system in the virtual switch environment." GROUP cvsConnectionNotifsGroup DESCRIPTION "The notifications for VSL connection status. This is only mandatory for the managed system in the virtual switch environment." GROUP cvsVSLStatisticsExtGroup DESCRIPTION "This group contains the VSL (Virtual switch link) more detail statistics information in the virtual switch environment. This is only mandatory for the managed system in the virtual switch environment." GROUP cvsCoreSwitchLocationGroup DESCRIPTION "This group contains the location configuration information of the active or standby core switches in the virtual switch environment. This is only mandatory for the managed system with supporting the location configuration information of core switches." GROUP cvsDualActiveDetectionNotifsControlGroup DESCRIPTION "This is only mandatory for the managed system with supporting the dual active detection notification." GROUP cvsDualActiveDetectionNotifsInfoGroup DESCRIPTION "This is only mandatory for the managed system with supporting the dual active detection notification." GROUP cvsDualActiveDetectionNotifsGroup DESCRIPTION "This is only mandatory for the managed system with supporting the dual active detection notification" OBJECT cvsDomain MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cvsSwitchID MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cvsSwitchMode MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cvsVSLChangeNotifEnable MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cvsCoreSwitchPriority MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cvsCoreSwitchPreempt MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cvsCoreSwitchLocation MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cvsVSLCoreSwitchID MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cvsDualActiveDetectionNotifEnable MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT cvsVSLConnectionRowStatus SYNTAX INTEGER { active(1) } WRITE-SYNTAX INTEGER { createAndGo(4), destroy(6) } MIN-ACCESS read-only DESCRIPTION "Write access is not required. Support for createAndWait and notInService is not required." ::= { cvsMIBCompliances 3 } -- Units of Conformance cvsGlobalGroup OBJECT-GROUP OBJECTS { cvsDomain, cvsSwitchID, cvsSwitchCapability, cvsSwitchMode, cvsSwitchConvertingStatus, cvsVSLChangeNotifEnable } STATUS current DESCRIPTION "The collection of objects which are used in the virtual switch or standalone environment." ::= { cvsMIBGroups 1 } cvsCoreSwitchGroup OBJECT-GROUP OBJECTS { cvsCoreSwitchPriority, cvsCoreSwitchPreempt } STATUS current DESCRIPTION "The collection of objects which are used to configure the selection information of the active or standby core switches in the virtual switch environment." ::= { cvsMIBGroups 2 } cvsChassisGroup OBJECT-GROUP OBJECTS { cvsChassisSwitchID, cvsChassisRole, cvsChassisUpTime } STATUS current DESCRIPTION "The collection of objects which are used to monitor the chassis information in virtual switch architecture." ::= { cvsMIBGroups 3 } cvsVSLConnectionGroup OBJECT-GROUP OBJECTS { cvsVSLCoreSwitchID, cvsVSLConnectOperStatus, cvsVSLLastConnectionStateChange, cvsVSLConfiguredPortCount, cvsVSLOperationalPortCount, cvsVSLConnectionRowStatus } STATUS current DESCRIPTION "The collection of objects which are used to configure the VSL connection information in standalone or virtual switch environment." ::= { cvsMIBGroups 4 } cvsVSLStatisticsGroup OBJECT-GROUP OBJECTS { cvsVSLTxTotalPkts, cvsVSLTxErrorPkts, cvsVSLTxChksumErrPkts, cvsVSLRxTotalPkts, cvsVSLRxErrorPkts, cvsVSLRxChksumErrPkts, cvsVSLPortTxOkPkts, cvsVSLPortTxFailPkts, cvsVSLPortRxBidirPkts, cvsVSLPortRxUnidirPkts, cvsVSLPortRxFailPkts, cvsVSLPortRxBadPkts } STATUS current DESCRIPTION "The collection of objects which are used to monitor the VSL statistics information in virtual switch architecture." ::= { cvsMIBGroups 5 } cvsModuleGroup OBJECT-GROUP OBJECTS { cvsModuleVSSupported, cvsModuleVSLCapable, cvsModuleSlotNumber } STATUS current DESCRIPTION "The collection of objects which are used to monitor the physical module information." ::= { cvsMIBGroups 6 } cvsConnectionNotifsGroup NOTIFICATION-GROUP NOTIFICATIONS { cvsVSLConnectionChangeNotif } STATUS current DESCRIPTION "The collection of notifications for the connections in virtual switch environment." ::= { cvsMIBGroups 7 } cvsVSLStatisticsExtGroup OBJECT-GROUP OBJECTS { cvsVSLTxLmpPkts, cvsVSLTxRrpPkts, cvsVSLTxPingPkts, cvsVSLTxProtoPkts, cvsVSLTxDataPkts, cvsVSLTxAckPkts, cvsVSLRxLmpPkts, cvsVSLRxRrpPkts, cvsVSLRxPingPkts, cvsVSLRxProtoPkts, cvsVSLRxDataPkts, cvsVSLRxAckPkts, cvsVSLTxTotalEobcPkts, cvsVSLTxLmpEobcPkts, cvsVSLTxRrpEobcPkts, cvsVSLTxPingEobcPkts, cvsVSLTxProtoEobcPkts, cvsVSLTxDataEobcPkts, cvsVSLTxAckEobcPkts, cvsVSLRxTotalEobcPkts, cvsVSLRxLmpEobcPkts, cvsVSLRxRrpEobcPkts, cvsVSLRxPingEobcPkts, cvsVSLRxProtoEobcPkts, cvsVSLRxDataEobcPkts, cvsVSLRxAckEobcPkts, cvsVSLTxTotalHCPkts, cvsVSLTxErrorHCPkts, cvsVSLTxChksumErrHCPkts, cvsVSLRxTotalHCPkts, cvsVSLRxErrorHCPkts, cvsVSLRxChksumErrHCPkts, cvsVSLPortRxMyInfoMismatchPkts, cvsVSLPortRxMyInfoAbsentPkts, cvsVSLPortRxBadMacAddressPkts, cvsVSLPortRxBadSwitchIdPkts, cvsVSLPortRxDomainIdMismatchPkts, cvsVSLPortRxPeerInfoMismatchPkts } STATUS current DESCRIPTION "The collection of objects which are used to monitor the more detail VSL statistics information in virtual switch architecture." ::= { cvsMIBGroups 8 } cvsVssModuleStandbyGroup OBJECT-GROUP OBJECTS { cvsModuleRprWarm } STATUS current DESCRIPTION "The collection of objects which are used to monitor the module in-chassis standby status information." ::= { cvsMIBGroups 9 } cvsCoreSwitchLocationGroup OBJECT-GROUP OBJECTS { cvsCoreSwitchLocation } STATUS current DESCRIPTION "The collection of objects which are used to configure the location information of the core switches in the virtual switch environment." ::= { cvsMIBGroups 10 } cvsDualActiveDetectionNotifsControlGroup OBJECT-GROUP OBJECTS { cvsDualActiveDetectionNotifEnable } STATUS current DESCRIPTION "The collection of object(s) which are used to control the notification of dual active detection in the virtual switch environment." ::= { cvsMIBGroups 11 } cvsDualActiveDetectionNotifsInfoGroup OBJECT-GROUP OBJECTS { cvsDualActiveDetectionInformation } STATUS current DESCRIPTION "The collection of object(s) providing variable binding for the dual active detection notification in the virtual switch environment." ::= { cvsMIBGroups 12 } cvsDualActiveDetectionNotifsGroup NOTIFICATION-GROUP NOTIFICATIONS { cvsDualActiveDetectionNotif } STATUS current DESCRIPTION "The collection of notification(s) for the dual active detection in the virtual switch environment." ::= { cvsMIBGroups 13 } END