-- *****************************************************************
-- CISCO-VOICE-CARD-MIB.my:  Codec Complexity MIB
--
-- March 2002, Prabhakaran Ganesan
--
-- Copyright (c) 1994 - 1996, 2000, 2001, 2002 by cisco Systems, Inc.
-- All rights reserved.
-- 
-- *****************************************************************
--


   CISCO-VOICE-CARD-MIB DEFINITIONS ::= BEGIN


   IMPORTS
       MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI
       MODULE-COMPLIANCE, OBJECT-GROUP          FROM SNMPv2-CONF
       ciscoMgmt                                FROM CISCO-SMI; 
 
   ciscoVoiceCard MODULE-IDENTITY
       LAST-UPDATED "200202150000Z"
       ORGANIZATION "Cisco Systems, Inc"
       CONTACT-INFO
               "       Cisco Systems
                       Customer Service


               Postal: 170 W. Tasman Drive
                       San Jose, CA  95134
                       USA


               Tel: +1 800 553-NETS


               E-mail: cs-voice@cisco.com"
       DESCRIPTION
               "The MIB module to configure voice-card specific 
                parameters  such as  codec complexity in voice-
                enabled cisco routers."
       REVISION      "200202150000Z"
       DESCRIPTION
               "Initial version"
       ::= { ciscoMgmt 300576 }


-- Notification


   ciscoVoiceCardNotifications OBJECT IDENTIFIER 
                                          ::= { ciscoVoiceCard 0  }


   ciscoVoiceCardObjects OBJECT IDENTIFIER ::= { ciscoVoiceCard 1 }


   -- The Voice Card table contains the various objects defining the
   -- characteristics of the voice card. The index is used to access 
   -- each voice card's entry in the table.


   cVoiceCardTable OBJECT-TYPE
       SYNTAX      SEQUENCE OF CVoiceCardEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
               "A list of voice card entries.  The number of entries
                is the number of slots in the router."
       ::= { ciscoVoiceCardObjects 1 }


   cVoiceCardEntry OBJECT-TYPE
       SYNTAX      CVoiceCardEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
               "An entry containing management information applicable
                to a particular  voice card. The number of entries is
                the same  as the number of  slots in the router. This 
                is a constant for a given router."
       INDEX   { cVoiceCardIndex }
       ::= { cVoiceCardTable 1 }


   CVoiceCardEntry ::=
       SEQUENCE {
           cVoiceCardIndex                 Unsigned32,
           cVoiceCardSlotNumber            Unsigned32,
           cVoiceCardCodecComplexity       INTEGER,
           cVoiceCardAdminStatus           INTEGER
       }


   cVoiceCardIndex OBJECT-TYPE
       SYNTAX      Unsigned32 (1..255)
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
               "A unique value, greater than zero, used to index the
                cVoiceCardTable."
       ::= { cVoiceCardEntry 1 }


    cVoiceCardSlotNumber  OBJECT-TYPE
       SYNTAX  Unsigned32 (0..255) 
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
                "The slot number of the slot containing this voice 
                 card."
       ::= { cVoiceCardEntry 2 }


   cVoiceCardCodecComplexity OBJECT-TYPE
       SYNTAX  INTEGER {
                   hc(2),       -- High Complexity
                   mc(4)        -- Medium Complexity
               }
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
               "Determines whether the voice ports in  the card can
                support   all  codecs  or not.   Medium  complexity 
                configuration  can  not support  all  codecs, while  
                High Complexity configuration supports  all codecs.
                The card  may support  all types of  codecs listed, 
                but the NMS  setting  a value  will force  the card
                only to use the codecs limited by the Codec 
                Complexity configured."
       ::= { cVoiceCardEntry 3 }


    cVoiceCardAdminStatus  OBJECT-TYPE
       SYNTAX  INTEGER {
                   up(1),       -- The voice card is not shut. 
                   down(2)      -- The voice card is shut.
               }
       MAX-ACCESS  read-write
       STATUS      current
       DESCRIPTION
               "Administrative  status of the  voice  card.  The voice
                card is  administratively down  if all voice ports are
                shut. The agent changes the status whenever the status
                of  the voice  card changes in  the router.  The voice 
                card  changes state  immediately when  the NMS changes
                the state of this object."
       ::= { cVoiceCardEntry 4 }
  
-- Conformance


   ciscoVoiceCardConformance OBJECT IDENTIFIER 
                                ::= { ciscoVoiceCard 2 }
   ciscoVoiceCardMIBCompliances OBJECT IDENTIFIER 
                                ::= { ciscoVoiceCardConformance 1 }
   ciscoVoiceCardMIBGroups OBJECT IDENTIFIER 
                                ::= { ciscoVoiceCardConformance 2 }


  -- Compliance statements


   ciscoVoiceCardMIBCompliance MODULE-COMPLIANCE
       STATUS current
       DESCRIPTION
           "Describes the requirements for conformance to the
            Cisco Voice Card MIB."
       MODULE   -- Compliance to this module
           MANDATORY-GROUPS  { 
              ciscoVoiceCardGroup 
           }
       ::= { ciscoVoiceCardMIBCompliances 1 }


  -- MIB Groups


   ciscoVoiceCardGroup OBJECT-GROUP
       OBJECTS {
          cVoiceCardSlotNumber,
          cVoiceCardCodecComplexity,
          cVoiceCardAdminStatus
       }
       STATUS current
       DESCRIPTION 
          "A collection of objects providing voice card specific
           functionality."
       ::= { ciscoVoiceCardMIBGroups 1 }
   
   END