MSIPX-MIB DEFINITIONS ::= BEGIN

-- This MIB defines the management information for a system using the IPX
-- protocol.  The MIB consists of four groups:
--
--    1.  Base Group - contains general information about IPX.
--
--    2.  Interface Group - contains information about all interfaces used by IPX.
--
--    3.  Forwarding Group - contains generic routing information that
--                           must be provided by any IPX routing protocol.
--
--    4.  Services Group - contains information about all known services.
--
-- This MIB is designed to provide a basic framework for the management
-- of systems implementing the IPX protocol.  Additional MIBs may be
-- created (especially in the area of IPX routing protocols) to contain
-- more specific information.  Whenever possible, these additional MIBs
-- should follow the format of this IPX MIB.
--
--

IMPORTS
				enterprises, Counter
						FROM RFC1155-SMI
				OBJECT-TYPE
						FROM RFC-1212
				TRAP-TYPE
						FROM RFC-1215
                microsoft, software
                        FROM MSFT-MIB;

-- microsoft 	OBJECT IDENTIFIER ::= { enterprises 311 }
-- software		OBJECT IDENTIFIER ::= { microsoft 1 }
ipx                             OBJECT IDENTIFIER ::= { software 8 }

-- Groups

ipxBase			OBJECT IDENTIFIER ::= {ipx 1}
ipxInterface	OBJECT IDENTIFIER ::= {ipx 2}
ipxForwarding	OBJECT IDENTIFIER ::= {ipx 3}
ipxServices		OBJECT IDENTIFIER ::= {ipx 4}
ipxTraps		OBJECT IDENTIFIER ::= {ipx 5}


-- Types

NetNumber		::= OCTET STRING (SIZE(4))
PhysAddress		::= OCTET STRING (SIZE(6))


-- Base Group
ipxBaseOperState OBJECT-TYPE
	SYNTAX		INTEGER {
						down(1),
						up(2)
						}
	ACCESS      read-only
	STATUS      mandatory
	DESCRIPTION "The current operational state of the software."
	::= {ipxBase 1}


ipxBasePrimaryNetNumber OBJECT-TYPE
	SYNTAX      NetNumber
	ACCESS      read-only
	STATUS      mandatory
	DESCRIPTION "The 'internal' network number."
	::= {ipxBase 2}

ipxBaseNode		OBJECT-TYPE
	SYNTAX		PhysAddress
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The node number portion of the IPX address of this
				system."
	::= {ipxBase 3}

ipxBaseSysName	OBJECT-TYPE
	SYNTAX		OCTET STRING (SIZE(0..48))
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The readable name for this system."
	::= {ipxBase 4}

ipxBaseMaxPathSplits OBJECT-TYPE
	SYNTAX		INTEGER (1..32)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The maximum number of paths with equal routing metric
				value which  this instance of IPX may split between when
				forwarding packets."
   ::= {ipxBase 5}

ipxBaseIfCount	OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The number of interfaces known to this instance of IPX."
	::= {ipxBase 6}

ipxBaseDestCount OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The number of currently reachable destinations known to
				this instance of IPX."
	::= {ipxBase 7}

ipxBaseServCount OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The number of services known to this instance of IPX."
	::= {ipxBase 8}

-- Interface Group
--   This group contains management information for each interface known
--   to this system.

-- Interface Table
--   The interface table contains an entry for each interface known to the
--   system.

ipxIfTable		OBJECT-TYPE
	SYNTAX		SEQUENCE OF IPXIfEntry
	ACCESS		not-accessible
	STATUS		mandatory
	DESCRIPTION "The interface table."
	::= {ipxInterface 1}

ipxIfEntry		OBJECT-TYPE
	SYNTAX      IPXIfEntry
	ACCESS      not-accessible
	STATUS      mandatory
	DESCRIPTION "Each entry corresponds to one interface known to the
				system."
	INDEX       {
				ipxIfIndex
				}
	::= {ipxIfTable 1}

IPXIfEntry		::= SEQUENCE {
					ipxIfIndex			INTEGER,
					ipxIfAdminState		INTEGER,
					ipxIfOperState		INTEGER,
					ipxIfAdapterIndex	INTEGER,
					ipxIfName			OCTET STRING,
					ipxIfType			INTEGER,
					ipxIfLocalMaxPacketSize	INTEGER,
					ipxIfMediaType		INTEGER,
					ipxIfNetNumber		NetNumber,
					ipxIfMacAddress		PhysAddress,
					ipxIfDelay			INTEGER,
					ipxIfThroughput		INTEGER,
					ipxIfIpxWanEnable	INTEGER,
					ipxIfNetbiosAccept	INTEGER,
					ipxIfNetbiosDeliver	INTEGER,
					ipxIfInHdrErrors	Counter,
					ipxIfInFilterDrops	Counter,
					ipxIfInNoRoutes		Counter,
					ipxIfInDiscards		Counter,
					ipxIfInDelivers		Counter,
					ipxIfOutFilterDrops	Counter,
					ipxIfOutDiscards	Counter,
					ipxIfOutDelivers	Counter,
					ipxIfInNetbiosPackets	Counter,
					ipxIfOutNetbiosPackets	Counter
					}

ipxIfIndex		OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-only
	STATUS      mandatory
	DESCRIPTION	"The identifier of this interface, unique within the
				system."
	::= {ipxIfEntry 1}

ipxIfAdminState OBJECT-TYPE
	SYNTAX		INTEGER	{
					disabled (1),
					enabled (2)
					}
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The desired state of the interface.Default is enabled(2).
				The interface state can be set to disabled(1) by explicit
				management action or by configuration information."
	::= {ipxIfEntry 2}

ipxIfOperState	OBJECT-TYPE
	SYNTAX      INTEGER {
					down(1),
					up(2),
					sleeping(3)
					}
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The current operational state of the interface.
				If ipxIfAdminState is disabled(1) then
				ipxIfOperState should be down(1). If ipxIfAdminState is
				changed to enabled(2) then ipxIfOperState should change to
				up(2) if the interface is ready to transmit and
				receive network traffic; it should change to
				sleeping(3) if the interface is waiting for external
				actions (such as a serial line waiting for an
				incomming connection); it should remain in the down(1)
				state if and only if there is a fault that prevents it
				from going to the up(2) state."
	::= {ipxIfEntry 3}

ipxIfAdapterIndex OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "The value of adapter index for the adapter used by this
				interface. On-demand interfaces in a sleeping state
				are not mapped to any adapter."
	::= {ipxIfEntry 4}

ipxIfName		OBJECT-TYPE
	SYNTAX		OCTET STRING (SIZE(0..48))
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The readable name for the interface."
	::= {ipxIfEntry 5}

ipxIfType		OBJECT-TYPE
	SYNTAX		INTEGER {
                    other(1),
					lan(2),
					wanRouter(3),
					wanWorkstation(4),
					internal(5),
					personalWanRouter(6),
					routerWorkstationDialout(7),
					standaloneWorkstationDialout(8)
                    }
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The type of the interface."
   ::= {ipxIfEntry 6}

ipxIfLocalMaxPacketSize OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The maximum size (including header), in bytes, that the
				system supports locally on this interface."
	::= {ipxIfEntry 7}


ipxIfMediaType	OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The media type used on this interface."
	::= {ipxIfEntry 8}

ipxIfNetNumber	OBJECT-TYPE
	SYNTAX		NetNumber
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The IPX network number of this interface."
	::= {ipxIfEntry 9}

ipxIfMacAddress OBJECT-TYPE
	SYNTAX		PhysAddress
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "The MAC address of this interface."
	::= {ipxIfEntry 10}

ipxIfDelay		OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The period of time, in microseconds, that it takes to
				transmit one byte of data, excluding protocol headers,
				to a destination on the other end of the interface, if
				the interface is free of other traffic."
	::= {ipxIfEntry 11}

ipxIfThroughput	OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The amount of data, in bits per second, that may flow
				through the interface if there is no other traffic."
	::= {ipxIfEntry 12}

ipxIfIpxWanEnable OBJECT-TYPE
	SYNTAX		INTEGER	{
					disabled (1),
					enabled (2)
					}
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"Enable IPXWAN negotiation."
	::= {ipxIfEntry 13}

ipxIfNetbiosAccept OBJECT-TYPE
	SYNTAX		INTEGER	{
					disabled (1),
					enabled (2)
					}
	ACCESS      read-write
	STATUS      mandatory
	DESCRIPTION "Accept Netbios Broadcast Packets."
	::= {ipxIfEntry 14}

ipxIfNetbiosDeliver OBJECT-TYPE
	SYNTAX		INTEGER	{
					disabled (1),
					enabled (2),
					enabledForStaticlySeededNames(3),
					enabledWhenOperStateUp(4)
					}
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"Deliver Netbios Broadcast Packets."
	::= {ipxIfEntry 15}

ipxIfInHdrErrors OBJECT-TYPE
	SYNTAX		Counter
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The total number of IPX packets received and discarded due
				to errors in their IPX headers, including any packet with
				a size less than the minimum 30 bytes, bad checksums,
				other format errors, etc."
	::= {ipxIfEntry 16}

ipxIfInFilterDrops OBJECT-TYPE
    SYNTAX		Counter
    ACCESS		read-only
    STATUS		mandatory
    DESCRIPTION	"The total number of incoming IPX packets discarded
				due to input filtering."
    ::= {ipxIfEntry 17}

ipxIfInNoRoutes	OBJECT-TYPE
	SYNTAX		Counter
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The total number of IPX packets received and discarded because
				no route was found to forward them to their destination"
	::= {ipxIfEntry 18}

ipxIfInDiscards	OBJECT-TYPE
	SYNTAX		Counter
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "The total number of IPX packets received and discarded for any
				other reason not counted in ipxIfInHdrErrors,
				ipxIfInFilterDrops and ipxIfNoRoutes."
	::= {ipxIfEntry 19}

ipxIfInDelivers	OBJECT-TYPE
	SYNTAX		Counter
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The total number of IPX packets successfully received"
	::= {ipxIfEntry 20}

ipxIfOutFilterDrops OBJECT-TYPE
    SYNTAX		Counter
    ACCESS		read-only
    STATUS		mandatory
    DESCRIPTION	"The total number of outgoing IPX packets discarded
				due to output filtering."
    ::= {ipxIfEntry 21}

ipxIfOutDiscards OBJECT-TYPE
	SYNTAX		Counter
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "The total number of IPX packets discarded for any
				other reason not counted in ipxIfOutFilterDrops."
	::= {ipxIfEntry 22}

ipxIfOutDelivers OBJECT-TYPE
	SYNTAX		Counter
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The total number of IPX packets successfully sent"
	::= {ipxIfEntry 23}


ipxIfInNetbiosPackets OBJECT-TYPE
    SYNTAX		Counter
    ACCESS		read-only
    STATUS		mandatory
    DESCRIPTION "The total number of IPX Type 20 packets received on this
				 interface. This includes the Type 20 packets received and
				 discarded for various reasons."
    ::= {ipxIfEntry 24}

ipxIfOutNetbiosPackets OBJECT-TYPE
    SYNTAX		Counter
    ACCESS		read-only
    STATUS		mandatory
    DESCRIPTION "The total number of IPX Type 20 packets successfully sent on
				this interface."
    ::= {ipxIfEntry 25}

-- Forwarding Group
--   This group provides a representation of the IPX forwarding database

-- Destination Table
--   The Destination table contains information about all known
--   destinations.  The routing information shown in this table represents
--   the path currently being used to reach the destination.

ipxDestTable	OBJECT-TYPE
	SYNTAX		SEQUENCE OF IPXDestEntry
	ACCESS		not-accessible
	STATUS		mandatory
	DESCRIPTION	"The Destination table contains information about all
				known destinations."
	::= {ipxForwarding 1}

ipxDestEntry	OBJECT-TYPE
	SYNTAX		IPXDestEntry
	ACCESS		not-accessible
	STATUS		mandatory
	DESCRIPTION	"Each entry corresponds to one destination."
	INDEX		{
				ipxDestNetNum
				}
	::= {ipxDestTable 1}

IPXDestEntry	::= SEQUENCE {
					ipxDestNetNum		NetNumber,
					ipxDestProtocol		INTEGER,
					ipxDestTicks		INTEGER,
					ipxDestHopCount		INTEGER,
					ipxDestNextHopIfIndex INTEGER,
					ipxDestNextHopMacAddress PhysAddress,
					ipxDestFlags		INTEGER
					}

ipxDestNetNum	OBJECT-TYPE
	SYNTAX		NetNumber
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION "The IPX network number of the destination."
	::= {ipxDestEntry 1}

ipxDestProtocol	OBJECT-TYPE
	SYNTAX		INTEGER {
					other(1),
					local(2),
					rip(3),
					nlsp(4),
					static(5)
					}
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The routing protocol from which knowledge of this
				destination was obtained."
	::= {ipxDestEntry 2}

ipxDestTicks	OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The delay in ticks to reach this destination."
	::= {ipxDestEntry 3}

ipxDestHopCount	OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The number of hops necessary to reach the destination."
	::= {ipxDestEntry 4}

ipxDestNextHopIfIndex OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The unique identifier of the interface used to reach the
				next hop."
	::= {ipxDestEntry 5}

ipxDestNextHopMacAddress OBJECT-TYPE
	SYNTAX		PhysAddress
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The MAC address of the next hop."
	::= {ipxDestEntry 6}

ipxDestFlags	OBJECT-TYPE
	SYNTAX		INTEGER (0..3)
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"A value that indicates of a special meaning of the route
				1 - this route is for a network used for dialing in clients
				2 - this route should not be advertised."
	::= {ipxDestEntry 7}

-- Static Routes Table
--   This table contains the information about all the static routes
--   defined.  There may be more than one static route to any given
--   destination.  Only the route currently being used will also be
--   present in the Destination Table defined above.

ipxStaticRouteTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF IPXStaticRouteEntry
	ACCESS		not-accessible
	STATUS		mandatory
	DESCRIPTION "The Static Routes table contains information about all
				destinations reached via statically configured routes."
	::= {ipxForwarding 2}

ipxStaticRouteEntry OBJECT-TYPE
	SYNTAX		IPXStaticRouteEntry
	ACCESS		not-accessible
	STATUS		mandatory
	DESCRIPTION	"Each entry corresponds to one static route."
	INDEX		{
				ipxStaticRouteIfIndex,
				ipxStaticRouteNetNum
				}
	::= {ipxStaticRouteTable 1}

IPXStaticRouteEntry ::= SEQUENCE {
					ipxStaticRouteIfIndex		INTEGER,
                    ipxStaticRouteNetNum		NetNumber,
					ipxStaticRouteEntryStatus	INTEGER,
					ipxStaticRouteTicks			INTEGER,
                    ipxStaticRouteHopCount		INTEGER,
					ipxStaticRouteNextHopMacAddress PhysAddress
                    }

ipxStaticRouteIfIndex OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The unique identifier of the interface used to
				reach the first hop in the static route."
	::= {ipxStaticRouteEntry 1}

ipxStaticRouteNetNum OBJECT-TYPE
	SYNTAX		NetNumber
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The IPX network number of the route's destination."
	::= {ipxStaticRouteEntry 2}

ipxStaticRouteEntryStatus OBJECT-TYPE
	SYNTAX		INTEGER {
					deleted(1),
					created(2)
					}
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"Create/Delete parameter. Default is created.
				Users perform an SNMP SET operation on this
				object in order to create/delete the IPX static route."
	::= {ipxStaticRouteEntry 3}

ipxStaticRouteTicks OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The delay, in ticks, to reach the route's destination."
	::= {ipxStaticRouteEntry 4}

ipxStaticRouteHopCount OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The number of hops necessary to reach the destination."
	::= {ipxStaticRouteEntry 5}

ipxStaticRouteNextHopMacAddress OBJECT-TYPE
	SYNTAX		PhysAddress
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The Mac address of the next hop."
	::= {ipxStaticRouteEntry 6}


-- Services Group
--   The Services group contains management information for all known
--   services.

-- Services Table
--    This table contains the services information indexed by service
--    name and type.

ipxServTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF IPXServEntry
	ACCESS		not-accessible
	STATUS		mandatory
	DESCRIPTION	"The table of services, indexed by name and type."
	::= {ipxServices 1}

ipxServEntry OBJECT-TYPE
	SYNTAX		IPXServEntry
	ACCESS      not-accessible
	STATUS      mandatory
	DESCRIPTION "Each entry corresponds to one service."
	INDEX       {
				ipxServType,
				ipxServName
			   }
	::= {ipxServTable 1}

IPXServEntry	::= SEQUENCE {
					ipxServType			OCTET STRING,
					ipxServName			OCTET STRING,
					ipxServProtocol		INTEGER,
					ipxServNetNum		NetNumber,
					ipxServNode			OCTET STRING,
					ipxServSocket		OCTET STRING,
					ipxServHopCount		INTEGER
                    }

ipxServType OBJECT-TYPE
	SYNTAX		OCTET STRING (SIZE(2))
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The service type."
	::= {ipxServEntry 1}

ipxServName OBJECT-TYPE
	SYNTAX		OCTET STRING (SIZE(1..48))
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The service name."
	::= {ipxServEntry 2}

ipxServProtocol OBJECT-TYPE
	SYNTAX		INTEGER {
					other(1),
					local(2),
					nlsp(4),
					static(5),
					sap(6)
					}
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The protocol from which knowledge of this service was
				obtained."
	::= {ipxServEntry 3}

ipxServNetNum OBJECT-TYPE
	SYNTAX		NetNumber
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The IPX network number portion of the IPX address of the
				service."
	::= {ipxServEntry 4}

ipxServNode OBJECT-TYPE
	SYNTAX		OCTET STRING(SIZE(6))
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The node portion of the IPX address of the service."
	::= {ipxServEntry 5}

ipxServSocket OBJECT-TYPE
	SYNTAX		OCTET STRING (SIZE(2))
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The socket portion of the IPX address of the service."
	::= {ipxServEntry 6}

ipxServHopCount OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The number of hops to the service."
	::= {ipxServEntry 7}


-- Static Services Table
--   This table contains information for all staticly seeded services

ipxStaticServTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF IPXStaticServEntry
	ACCESS		not-accessible
	STATUS		mandatory
	DESCRIPTION	"The Static Services table contains information about
				all staticly seeded services."
	::= {ipxServices 2}

ipxStaticServEntry OBJECT-TYPE
	SYNTAX		IPXStaticServEntry
	ACCESS		not-accessible
	STATUS		mandatory
	DESCRIPTION	"Each entry corresponds to one service."
	INDEX		{
				ipxStaticServIfIndex,
				ipxStaticServType,
				ipxStaticServName
				}
	::= {ipxStaticServTable 1}

IPXStaticServEntry ::= SEQUENCE {
				ipxStaticServIfIndex		INTEGER,
				ipxStaticServType			OCTET STRING,
				ipxStaticServName			OCTET STRING,
				ipxStaticServEntryStatus	INTEGER,
				ipxStaticServNetNum			NetNumber,
				ipxStaticServNode			PhysAddress,
				ipxStaticServSocket			OCTET STRING,
				ipxStaticServHopCount		INTEGER
				}

ipxStaticServIfIndex OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The interface used to reach this service."
	::= {ipxStaticServEntry 1}

ipxStaticServType OBJECT-TYPE
	SYNTAX		OCTET STRING (SIZE(2))
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The service type."
	::= {ipxStaticServEntry 2}

ipxStaticServName OBJECT-TYPE
	SYNTAX		OCTET STRING (SIZE(1..48))
	ACCESS		read-only
	STATUS		mandatory
	DESCRIPTION	"The service name."
	::= {ipxStaticServEntry 3}


ipxStaticServEntryStatus OBJECT-TYPE
	SYNTAX		INTEGER {
					deleted(1),
					created(2)
					}
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"Create/Delete parameter. Default is created.
				Users perform an SNMP SET operation on this
				object in order to create/delete the IPX static service."
	::= {ipxStaticServEntry 4}

ipxStaticServNetNum OBJECT-TYPE
	SYNTAX		NetNumber
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The IPX network number portion of the IPX address of the
				service."
	::= {ipxStaticServEntry 5}

ipxStaticServNode OBJECT-TYPE
	SYNTAX		PhysAddress
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The node portion of the IPX address of the service."
	::= {ipxStaticServEntry 6}

ipxStaticServSocket OBJECT-TYPE
	SYNTAX		OCTET STRING (SIZE(2))
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The socket portion of the IPX address of the service."
	::= {ipxStaticServEntry 7}

ipxStaticServHopCount OBJECT-TYPE
	SYNTAX		INTEGER
	ACCESS		read-write
	STATUS		mandatory
	DESCRIPTION	"The number of hops to the service."
	::= {ipxStaticServEntry 8}




END