CTRON-FRONTPANEL-MIB DEFINITIONS ::= BEGIN -- ctron-frontpanel-mib.txt -- Revision: 1.04.00 -- Part Number: 2170558-02 -- Date: August 11, 1995 -- Cabletron Systems, Inc. -- 35 Industrial Way, P.O. Box 5005 -- Rochester, NH 03867-0505 -- (603) 332-9400 -- support@ctron.com -- This module provides authoritative definitions for Cabletron's -- enterprise-specific front panel MIB. -- -- This module will be extended, as required. -- -- Cabletron Systems reserves the right to make changes in -- specification and other information contained in this document -- without prior notice. The reader should consult Cabletron Systems -- to determine whether any such changes have been made. -- -- In no event shall Cabletron Systems be liable for any incidental, -- indirect, special, or consequential damages whatsoever (including -- but not limited to lost profits) arising out of or related to this -- document or the information contained in it, even if Cabletron -- Systems has been advised of, known, or should have known, the -- possibility of such damages. -- -- Cabletron grants vendors, end-users, and other interested parties -- a non-exclusive license to use this Specification in connection -- with the management of Cabletron products. -- Copyright October 95 Cabletron Systems -- This MIB describes objects that define front panel -- redundance within the MMAC chassis. IMPORTS NetworkAddress FROM RFC1155-SMI ctFpRedundancy FROM CTRON-MIB-NAMES OBJECT-TYPE FROM RFC-1212; -- The fPredund group -- Implementation of this group is mandatory for devices with -- front panel redundancy. ctFpRedund OBJECT IDENTIFIER ::= { ctFpRedundancy 1 } ctFpRedundReset OBJECT-TYPE SYNTAX INTEGER { noReset(1), reset(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If this object is set to Reset it will cause a reset of the front panel redundancy. Setting this object to NoReset will do nothing. This object will always be read as NoReset." ::= { ctFpRedund 1 } ctFpRedundPollInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Get/Set the number of seconds between polls for front panel redundancy." ::= { ctFpRedund 2 } ctFpRedundRetrys OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Get/Set the the number of unanswered polls allowed for the front panel redundancy before it switches ports." ::= { ctFpRedund 3 } ctFpRedundNumAddr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get the number of IP Addresses associated with front panel redundancy." ::= { ctFpRedund 4 } ctFpRedundAddAddr OBJECT-TYPE SYNTAX NetworkAddress ACCESS read-write STATUS mandatory DESCRIPTION "Add an IP Address to the polling list for the front panel redundancy." ::= { ctFpRedund 5 } ctFpRedundDelAddr OBJECT-TYPE SYNTAX NetworkAddress ACCESS read-write STATUS mandatory DESCRIPTION "Delete an IP Address from the polling list for the front panel redundancy." ::= { ctFpRedund 6 } ctFpRedundActivePort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Get/Set the front panel port you want to be active when front panel redundancy is enabled." ::= { ctFpRedund 7 } ctFpRedundEnable OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If this object is set to enable, the front panel redundancy will be activated. If this object is set to disable, the front panel redundancy will be deactivated. When read, this object will returns the state of the object based on the last request made." ::= { ctFpRedund 8 } ctFpRedundAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF CtFpRedundAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { ctFpRedund 9 } ctFpRedundAddrEntry OBJECT-TYPE SYNTAX CtFpRedundAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { ctFpRedundAddrId } ::= { ctFpRedundAddrTable 1 } CtFpRedundAddrEntry ::= SEQUENCE { ctFpRedundAddrId INTEGER, ctFpRedundAddrIPAddr NetworkAddress } ctFpRedundAddrId OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "A unique value identifying an element in a sequence of member IP Addresses which belong to the front panel redundancy. This value goes from 1 to the maximum number of IP Addresses which may be included in front panel redundancy." ::= { ctFpRedundAddrEntry 1 } ctFpRedundAddrIPAddr OBJECT-TYPE SYNTAX NetworkAddress ACCESS read-only STATUS mandatory DESCRIPTION "Returns an IP Address associated with the front panel redundancy." ::= { ctFpRedundAddrEntry 2 } END