Nortel-Magellan-Passport-IpxMIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE FROM RFC-1212 passportMIBs FROM Nortel-Magellan-Passport-UsefulDefinitionsMIB Counter32, PhysAddress, DisplayString, StorageType, RowStatus, Gauge32, Integer32, Unsigned32 FROM Nortel-Magellan-Passport-StandardTextualConventionsMIB AsciiString, DashedHexString, NonReplicated, Hex, AsciiStringIndex FROM Nortel-Magellan-Passport-TextualConventionsMIB vrIndex, vrPpIndex, vrPp, vr FROM Nortel-Magellan-Passport-VirtualRouterMIB; -- LAST-UPDATED "9902010000Z" -- ORGANIZATION "Nortel" -- CONTACT-INFO " -- Nortel Magellan Network Management -- -- Postal: P.O. Box 5080, Station F -- Ottawa, Ontario -- Canada K2C 3T1 -- -- Email: nm_plm@nt.com" -- DESCRIPTION -- "The module describing the Nortel Magellan Passport -- Ipx Enterprise MIB." ipxMIB OBJECT IDENTIFIER ::= { passportMIBs 28 } -- Vr/ PP/ IpxP -- The IPX protocol specific information relating to this ProtocolPort -- instance. vrPpIpxP OBJECT IDENTIFIER ::= { vrPp 6 } vrPpIpxPRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpxPRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrPpIpxP components." ::= { vrPpIpxP 1 } vrPpIpxPRowStatusEntry OBJECT-TYPE SYNTAX VrPpIpxPRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrPpIpxP component." INDEX { vrIndex, vrPpIndex, vrPpIpxPIndex } ::= { vrPpIpxPRowStatusTable 1 } VrPpIpxPRowStatusEntry ::= SEQUENCE { vrPpIpxPRowStatus RowStatus, vrPpIpxPComponentName DisplayString, vrPpIpxPStorageType StorageType, vrPpIpxPIndex INTEGER } vrPpIpxPRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrPpIpxP components. These components can be added and deleted." ::= { vrPpIpxPRowStatusEntry 1 } vrPpIpxPComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrPpIpxPRowStatusEntry 2 } vrPpIpxPStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrPpIpxP tables." ::= { vrPpIpxPRowStatusEntry 4 } vrPpIpxPIndex OBJECT-TYPE SYNTAX INTEGER { link(1), ethernet(2), novell(3), sap(4), snap(5), vns(6), tunnel(7) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrPpIpxP tables." ::= { vrPpIpxPRowStatusEntry 10 } vrPpIpxPAdminControlTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpxPAdminControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component." ::= { vrPpIpxP 100 } vrPpIpxPAdminControlEntry OBJECT-TYPE SYNTAX VrPpIpxPAdminControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrPpIpxPAdminControlTable." INDEX { vrIndex, vrPpIndex, vrPpIpxPIndex } ::= { vrPpIpxPAdminControlTable 1 } VrPpIpxPAdminControlEntry ::= SEQUENCE { vrPpIpxPSnmpAdminStatus INTEGER } vrPpIpxPSnmpAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { vrPpIpxPAdminControlEntry 1 } vrPpIpxPProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpxPProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Provisionable group for the IpxPort component." ::= { vrPpIpxP 101 } vrPpIpxPProvEntry OBJECT-TYPE SYNTAX VrPpIpxPProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrPpIpxPProvTable." INDEX { vrIndex, vrPpIndex, vrPpIpxPIndex } ::= { vrPpIpxPProvTable 1 } VrPpIpxPProvEntry ::= SEQUENCE { vrPpIpxPNetworkNumberProv DashedHexString, vrPpIpxPDefaultType INTEGER, vrPpIpxPBroadcastInhibit INTEGER } vrPpIpxPNetworkNumberProv OBJECT-TYPE SYNTAX DashedHexString (SIZE (0..4)) ACCESS read-write STATUS mandatory DESCRIPTION "The Ipx network number of the network directly connected to this port." ::= { vrPpIpxPProvEntry 1 } vrPpIpxPDefaultType OBJECT-TYPE SYNTAX INTEGER { other(1), broadcast(2), ppp(3), wanRip(4), unnumberedRip(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute indicates which protocol is to run on a protocol port. In the case of a lan media it is to be set to broadcast. In the case of WAN media the following choices are to be exercised: For running Pre-IPXWAN RIP set value to other. For running numbered RIP set value to wanRip. For running un-numbered RIP set value to unnumberedRip. Setting this value to ppp will signify unnumbered Rip running on a ppp port." ::= { vrPpIpxPProvEntry 2 } vrPpIpxPBroadcastInhibit OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "If this attribute is set, all outgoing periodic and triggered updates for RIP and SAP will be inhibited for the port. However the port will still accept incoming RIP and SAP packets on the port. This may be useful for ports with only a bank of servers on its network in order to limit the routing traffic, assuming that servers don't require routing information or other server information." DEFVAL { disabled } ::= { vrPpIpxPProvEntry 3 } vrPpIpxPSresProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpxPSresProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisioned attributes for SourceRouteEndStation support." ::= { vrPpIpxP 102 } vrPpIpxPSresProvEntry OBJECT-TYPE SYNTAX VrPpIpxPSresProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrPpIpxPSresProvTable." INDEX { vrIndex, vrPpIndex, vrPpIpxPIndex } ::= { vrPpIpxPSresProvTable 1 } VrPpIpxPSresProvEntry ::= SEQUENCE { vrPpIpxPSourceRouteEndStationSupport INTEGER } vrPpIpxPSourceRouteEndStationSupport OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to enable or disable support for SourceRouteEndStation (Sres). If set to enable, Sres will be supported on this protocol on this ProtocolPort (Pp). If set to disable, it will not be supported. An Sres component must be provisioned under the VirtualRouter if this attribute is set to enable. If this attribute is set to enable and this Pp has its linkToMedia attribute set, it must be linked to a LanApplication (La) that has its Framer interfaceName linked to a Fddi or TokenRing component." DEFVAL { disable } ::= { vrPpIpxPSresProvEntry 1 } vrPpIpxPStateTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpxPStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { vrPpIpxP 103 } vrPpIpxPStateEntry OBJECT-TYPE SYNTAX VrPpIpxPStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrPpIpxPStateTable." INDEX { vrIndex, vrPpIndex, vrPpIpxPIndex } ::= { vrPpIpxPStateTable 1 } VrPpIpxPStateEntry ::= SEQUENCE { vrPpIpxPAdminState INTEGER, vrPpIpxPOperationalState INTEGER, vrPpIpxPUsageState INTEGER } vrPpIpxPAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { vrPpIpxPStateEntry 1 } vrPpIpxPOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { vrPpIpxPStateEntry 2 } vrPpIpxPUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { vrPpIpxPStateEntry 3 } vrPpIpxPOperStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpxPOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Operational Status attribute. This attribute defines the current operational state of this component." ::= { vrPpIpxP 104 } vrPpIpxPOperStatusEntry OBJECT-TYPE SYNTAX VrPpIpxPOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrPpIpxPOperStatusTable." INDEX { vrIndex, vrPpIndex, vrPpIpxPIndex } ::= { vrPpIpxPOperStatusTable 1 } VrPpIpxPOperStatusEntry ::= SEQUENCE { vrPpIpxPSnmpOperStatus INTEGER } vrPpIpxPSnmpOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { vrPpIpxPOperStatusEntry 1 } vrPpIpxPOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpxPOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The IpxPort Operational Attributes." ::= { vrPpIpxP 105 } vrPpIpxPOperEntry OBJECT-TYPE SYNTAX VrPpIpxPOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrPpIpxPOperTable." INDEX { vrIndex, vrPpIndex, vrPpIpxPIndex } ::= { vrPpIpxPOperTable 1 } VrPpIpxPOperEntry ::= SEQUENCE { vrPpIpxPType INTEGER, vrPpIpxPEncapsulation INTEGER, vrPpIpxPNetworkNumber DashedHexString, vrPpIpxPNode DashedHexString } vrPpIpxPType OBJECT-TYPE SYNTAX INTEGER { other(1), broadcast(2), ppp(3), wanRip(4), unnumberedRip(5) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of the circuit. This would differ from the provisioned type when a different routing protocol is negotiated with the peer." ::= { vrPpIpxPOperEntry 1 } vrPpIpxPEncapsulation OBJECT-TYPE SYNTAX INTEGER { link(1), ethernet(2), novell(3), sap(4), snap(5), vns(6), tunnel(7) } ACCESS read-only STATUS mandatory DESCRIPTION "Packet encapsulation type that the router has determined to use on the port. There are seven encapsulation types used to identify IPX datagram as listed below. 1. link: IPX encapsulation type for PPP, ATM MPE, and X25DTE media types. 2. ethernet: IPX encapsulation type for Ethernet and FrDte media types. 3. novell: IPX encapsulation type for Ethernet and FrDte media types. 4. sap: IPX encapsulation type for FDDI, Token Ring, Ethernet and FrDte media types. 5. snap: IPX encapsulation type for FDDI, Token Ring, Ethernet, and FrDte media types. 6. vns: IPX encapsulation type for VNS media type. 7. tunnel: IPX encapsulation type for Tunnel media type." ::= { vrPpIpxPOperEntry 2 } vrPpIpxPNetworkNumber OBJECT-TYPE SYNTAX DashedHexString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "The Ipx network number from the provisioned networkNumberProv value." ::= { vrPpIpxPOperEntry 3 } vrPpIpxPNode OBJECT-TYPE SYNTAX DashedHexString (SIZE (1..6)) ACCESS read-only STATUS mandatory DESCRIPTION "The Ipx node address of this IpxPort." ::= { vrPpIpxPOperEntry 4 } vrPpIpxPStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpxPStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The IpxPort Statistics group." ::= { vrPpIpxP 106 } vrPpIpxPStatsEntry OBJECT-TYPE SYNTAX VrPpIpxPStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrPpIpxPStatsTable." INDEX { vrIndex, vrPpIndex, vrPpIpxPIndex } ::= { vrPpIpxPStatsTable 1 } VrPpIpxPStatsEntry ::= SEQUENCE { vrPpIpxPStateChanges Counter32, vrPpIpxPInReceives Counter32, vrPpIpxPForwarded Counter32 } vrPpIpxPStateChanges OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of times the port has changed state. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { vrPpIpxPStatsEntry 1 } vrPpIpxPInReceives OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Total number of packets received. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { vrPpIpxPStatsEntry 2 } vrPpIpxPForwarded OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of packets forwarded. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { vrPpIpxPStatsEntry 3 } -- Vr/ PP/ IpxP RipP -- The RIP specific information pertaining to this IpxPort component. vrPpIpxPRipP OBJECT IDENTIFIER ::= { vrPpIpxP 2 } vrPpIpxPRipPRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpxPRipPRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrPpIpxPRipP components." ::= { vrPpIpxPRipP 1 } vrPpIpxPRipPRowStatusEntry OBJECT-TYPE SYNTAX VrPpIpxPRipPRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrPpIpxPRipP component." INDEX { vrIndex, vrPpIndex, vrPpIpxPIndex, vrPpIpxPRipPIndex } ::= { vrPpIpxPRipPRowStatusTable 1 } VrPpIpxPRipPRowStatusEntry ::= SEQUENCE { vrPpIpxPRipPRowStatus RowStatus, vrPpIpxPRipPComponentName DisplayString, vrPpIpxPRipPStorageType StorageType, vrPpIpxPRipPIndex NonReplicated } vrPpIpxPRipPRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrPpIpxPRipP components. These components cannot be added nor deleted." ::= { vrPpIpxPRipPRowStatusEntry 1 } vrPpIpxPRipPComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrPpIpxPRipPRowStatusEntry 2 } vrPpIpxPRipPStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrPpIpxPRipP tables." ::= { vrPpIpxPRipPRowStatusEntry 4 } vrPpIpxPRipPIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrPpIpxPRipP tables." ::= { vrPpIpxPRipPRowStatusEntry 10 } vrPpIpxPRipPStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpxPRipPStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "RIP specific statistics for this IpxPort." ::= { vrPpIpxPRipP 10 } vrPpIpxPRipPStatsEntry OBJECT-TYPE SYNTAX VrPpIpxPRipPStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrPpIpxPRipPStatsTable." INDEX { vrIndex, vrPpIndex, vrPpIpxPIndex, vrPpIpxPRipPIndex } ::= { vrPpIpxPRipPStatsTable 1 } VrPpIpxPRipPStatsEntry ::= SEQUENCE { vrPpIpxPRipPInPackets Counter32, vrPpIpxPRipPInRequests Counter32, vrPpIpxPRipPInResponses Counter32, vrPpIpxPRipPOutPackets Counter32, vrPpIpxPRipPOutRequests Counter32, vrPpIpxPRipPOutResponses Counter32, vrPpIpxPRipPIncorrectPackets Counter32 } vrPpIpxPRipPInPackets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of RIP packets received on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { vrPpIpxPRipPStatsEntry 1 } vrPpIpxPRipPInRequests OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of RIP request packets received on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { vrPpIpxPRipPStatsEntry 2 } vrPpIpxPRipPInResponses OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of RIP response packets received on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { vrPpIpxPRipPStatsEntry 3 } vrPpIpxPRipPOutPackets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of RIP packets sent out on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { vrPpIpxPRipPStatsEntry 4 } vrPpIpxPRipPOutRequests OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of RIP request packets sent out on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { vrPpIpxPRipPStatsEntry 5 } vrPpIpxPRipPOutResponses OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of RIP response packets sent out on this IpxPort. This includes RIP periodic update packets. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { vrPpIpxPRipPStatsEntry 6 } vrPpIpxPRipPIncorrectPackets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of times that an incorrectly formatted RIP packet was received on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { vrPpIpxPRipPStatsEntry 7 } -- Vr/ PP/ IpxP SapP -- The SAP specific information pertaining to this IpxPort component. vrPpIpxPSapP OBJECT IDENTIFIER ::= { vrPpIpxP 3 } vrPpIpxPSapPRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpxPSapPRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrPpIpxPSapP components." ::= { vrPpIpxPSapP 1 } vrPpIpxPSapPRowStatusEntry OBJECT-TYPE SYNTAX VrPpIpxPSapPRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrPpIpxPSapP component." INDEX { vrIndex, vrPpIndex, vrPpIpxPIndex, vrPpIpxPSapPIndex } ::= { vrPpIpxPSapPRowStatusTable 1 } VrPpIpxPSapPRowStatusEntry ::= SEQUENCE { vrPpIpxPSapPRowStatus RowStatus, vrPpIpxPSapPComponentName DisplayString, vrPpIpxPSapPStorageType StorageType, vrPpIpxPSapPIndex NonReplicated } vrPpIpxPSapPRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrPpIpxPSapP components. These components cannot be added nor deleted." ::= { vrPpIpxPSapPRowStatusEntry 1 } vrPpIpxPSapPComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrPpIpxPSapPRowStatusEntry 2 } vrPpIpxPSapPStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrPpIpxPSapP tables." ::= { vrPpIpxPSapPRowStatusEntry 4 } vrPpIpxPSapPIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrPpIpxPSapP tables." ::= { vrPpIpxPSapPRowStatusEntry 10 } vrPpIpxPSapPStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpxPSapPStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "SAP specific statistics for this IpxPort." ::= { vrPpIpxPSapP 10 } vrPpIpxPSapPStatsEntry OBJECT-TYPE SYNTAX VrPpIpxPSapPStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrPpIpxPSapPStatsTable." INDEX { vrIndex, vrPpIndex, vrPpIpxPIndex, vrPpIpxPSapPIndex } ::= { vrPpIpxPSapPStatsTable 1 } VrPpIpxPSapPStatsEntry ::= SEQUENCE { vrPpIpxPSapPInPackets Counter32, vrPpIpxPSapPInRequests Counter32, vrPpIpxPSapPInResponses Counter32, vrPpIpxPSapPOutPackets Counter32, vrPpIpxPSapPOutRequests Counter32, vrPpIpxPSapPOutResponses Counter32, vrPpIpxPSapPIncorrectPackets Counter32 } vrPpIpxPSapPInPackets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SAP packets received on this IpxPort. Includes SAP requests and responses. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { vrPpIpxPSapPStatsEntry 1 } vrPpIpxPSapPInRequests OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of SAP Request packets received on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { vrPpIpxPSapPStatsEntry 2 } vrPpIpxPSapPInResponses OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of SAP response packets received on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { vrPpIpxPSapPStatsEntry 3 } vrPpIpxPSapPOutPackets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SAP packets sent out this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { vrPpIpxPSapPStatsEntry 4 } vrPpIpxPSapPOutRequests OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of SAP request packets sent out on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { vrPpIpxPSapPStatsEntry 5 } vrPpIpxPSapPOutResponses OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of SAP response packets sent out this IpxPort. This includes periodic SAP update packets. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { vrPpIpxPSapPStatsEntry 6 } vrPpIpxPSapPIncorrectPackets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of times an incorrectly formatted SAP packet was received on this IpxPort. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { vrPpIpxPSapPStatsEntry 7 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- Vr/ PP/ IpxP IWP -- This component contains information for this IpxPort that are specific to -- the IPXWAN protocol. vrPpIpxPIWP OBJECT IDENTIFIER ::= { vrPpIpxP 4 } vrPpIpxPIWPRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpxPIWPRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrPpIpxPIWP components." ::= { vrPpIpxPIWP 1 } vrPpIpxPIWPRowStatusEntry OBJECT-TYPE SYNTAX VrPpIpxPIWPRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrPpIpxPIWP component." INDEX { vrIndex, vrPpIndex, vrPpIpxPIndex, vrPpIpxPIWPRemoteStationIdentifierIndex } ::= { vrPpIpxPIWPRowStatusTable 1 } VrPpIpxPIWPRowStatusEntry ::= SEQUENCE { vrPpIpxPIWPRowStatus RowStatus, vrPpIpxPIWPComponentName DisplayString, vrPpIpxPIWPStorageType StorageType, vrPpIpxPIWPRemoteStationIdentifierIndex DashedHexString } vrPpIpxPIWPRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrPpIpxPIWP components. These components cannot be added nor deleted." ::= { vrPpIpxPIWPRowStatusEntry 1 } vrPpIpxPIWPComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrPpIpxPIWPRowStatusEntry 2 } vrPpIpxPIWPStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrPpIpxPIWP tables." ::= { vrPpIpxPIWPRowStatusEntry 4 } vrPpIpxPIWPRemoteStationIdentifierIndex OBJECT-TYPE SYNTAX DashedHexString (SIZE (1..8)) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrPpIpxPIWP tables." ::= { vrPpIpxPIWPRowStatusEntry 10 } vrPpIpxPIWPOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpxPIWPOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains operational attributes that are specific for the IPXWAN protocol." ::= { vrPpIpxPIWP 10 } vrPpIpxPIWPOperEntry OBJECT-TYPE SYNTAX VrPpIpxPIWPOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrPpIpxPIWPOperTable." INDEX { vrIndex, vrPpIndex, vrPpIpxPIndex, vrPpIpxPIWPRemoteStationIdentifierIndex } ::= { vrPpIpxPIWPOperTable 1 } VrPpIpxPIWPOperEntry ::= SEQUENCE { vrPpIpxPIWPNeighbourRouterName AsciiString, vrPpIpxPIWPNeighbourInternalNetworkNumber DashedHexString, vrPpIpxPIWPInitFails Counter32 } vrPpIpxPIWPNeighbourRouterName OBJECT-TYPE SYNTAX AsciiString (SIZE (0..48)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the neighboring router on a WAN circuit." ::= { vrPpIpxPIWPOperEntry 1 } vrPpIpxPIWPNeighbourInternalNetworkNumber OBJECT-TYPE SYNTAX DashedHexString (SIZE (1..4)) ACCESS read-only STATUS mandatory DESCRIPTION "The internal network number of the neighboring router on a WAN circuit." ::= { vrPpIpxPIWPOperEntry 2 } vrPpIpxPIWPInitFails OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of times initialization has failed on this circuit. This counter wraps around to zero after reaching the maximum value of 4294967295" ::= { vrPpIpxPIWPOperEntry 3 } -- Vr/ Pp/ IpxP NetSentryPort -- This component contains the NetSentry attributes that specify the names -- of the NetSentry filters which will be applied to IPX packets as -- incoming and outgoing filters. vrPpIpxPNetSentryP OBJECT IDENTIFIER ::= { vrPpIpxP 5 } vrPpIpxPNetSentryPRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpxPNetSentryPRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrPpIpxPNetSentryP components." ::= { vrPpIpxPNetSentryP 1 } vrPpIpxPNetSentryPRowStatusEntry OBJECT-TYPE SYNTAX VrPpIpxPNetSentryPRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrPpIpxPNetSentryP component." INDEX { vrIndex, vrPpIndex, vrPpIpxPIndex, vrPpIpxPNetSentryPIndex } ::= { vrPpIpxPNetSentryPRowStatusTable 1 } VrPpIpxPNetSentryPRowStatusEntry ::= SEQUENCE { vrPpIpxPNetSentryPRowStatus RowStatus, vrPpIpxPNetSentryPComponentName DisplayString, vrPpIpxPNetSentryPStorageType StorageType, vrPpIpxPNetSentryPIndex NonReplicated } vrPpIpxPNetSentryPRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrPpIpxPNetSentryP components. These components can be added and deleted." ::= { vrPpIpxPNetSentryPRowStatusEntry 1 } vrPpIpxPNetSentryPComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrPpIpxPNetSentryPRowStatusEntry 2 } vrPpIpxPNetSentryPStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrPpIpxPNetSentryP tables." ::= { vrPpIpxPNetSentryPRowStatusEntry 4 } vrPpIpxPNetSentryPIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrPpIpxPNetSentryP tables." ::= { vrPpIpxPNetSentryPRowStatusEntry 10 } vrPpIpxPNetSentryPProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrPpIpxPNetSentryPProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the NetSentry attributes that specify the names of the NetSentry filters which will be applied to IPX packets as incoming and outgoing filters." ::= { vrPpIpxPNetSentryP 10 } vrPpIpxPNetSentryPProvEntry OBJECT-TYPE SYNTAX VrPpIpxPNetSentryPProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrPpIpxPNetSentryPProvTable." INDEX { vrIndex, vrPpIndex, vrPpIpxPIndex, vrPpIpxPNetSentryPIndex } ::= { vrPpIpxPNetSentryPProvTable 1 } VrPpIpxPNetSentryPProvEntry ::= SEQUENCE { vrPpIpxPNetSentryPInComingFilter AsciiString, vrPpIpxPNetSentryPOutGoingFilter AsciiString } vrPpIpxPNetSentryPInComingFilter OBJECT-TYPE SYNTAX AsciiString (SIZE (0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the name of the NetSentry filter applied to incoming IPX packets on this port." ::= { vrPpIpxPNetSentryPProvEntry 1 } vrPpIpxPNetSentryPOutGoingFilter OBJECT-TYPE SYNTAX AsciiString (SIZE (0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of the filter applied to outgoing IPX packets on this port." ::= { vrPpIpxPNetSentryPProvEntry 2 } -- Vr/ Ipx -- This component provides for routing of Novell IPX packets in Novell's -- NetWare environment. vrIpx OBJECT IDENTIFIER ::= { vr 7 } vrIpxRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpxRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpx components." ::= { vrIpx 1 } vrIpxRowStatusEntry OBJECT-TYPE SYNTAX VrIpxRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpx component." INDEX { vrIndex, vrIpxIndex } ::= { vrIpxRowStatusTable 1 } VrIpxRowStatusEntry ::= SEQUENCE { vrIpxRowStatus RowStatus, vrIpxComponentName DisplayString, vrIpxStorageType StorageType, vrIpxIndex NonReplicated } vrIpxRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpx components. These components can be added and deleted." ::= { vrIpxRowStatusEntry 1 } vrIpxComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpxRowStatusEntry 2 } vrIpxStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpx tables." ::= { vrIpxRowStatusEntry 4 } vrIpxIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpx tables." ::= { vrIpxRowStatusEntry 10 } vrIpxAdminControlTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpxAdminControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component." ::= { vrIpx 100 } vrIpxAdminControlEntry OBJECT-TYPE SYNTAX VrIpxAdminControlEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpxAdminControlTable." INDEX { vrIndex, vrIpxIndex } ::= { vrIpxAdminControlTable 1 } VrIpxAdminControlEntry ::= SEQUENCE { vrIpxSnmpAdminStatus INTEGER } vrIpxSnmpAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { vrIpxAdminControlEntry 1 } vrIpxProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpxProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IPX system provisionable attributes." ::= { vrIpx 101 } vrIpxProvEntry OBJECT-TYPE SYNTAX VrIpxProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpxProvTable." INDEX { vrIndex, vrIpxIndex } ::= { vrIpxProvTable 1 } VrIpxProvEntry ::= SEQUENCE { vrIpxNetworkNumber DashedHexString, vrIpxMaxPathSplits Unsigned32, vrIpxMaxHops Unsigned32, vrIpxRipUpdateInterval Unsigned32, vrIpxSapUpdateInterval Unsigned32, vrIpxControlDelay Unsigned32, vrIpxUpdateDelay Unsigned32, vrIpxRipAgeMultiplier Unsigned32, vrIpxSapAgeMultiplier Unsigned32, vrIpxDamping INTEGER, vrIpxRipMaxDampedGeneralRequests Unsigned32, vrIpxRipMaxDampedSpecificRequests Unsigned32, vrIpxSapMaxDampedGeneralRequests Unsigned32, vrIpxSapMaxDampedSpecificRequests Unsigned32, vrIpxInitialGeneralRequests INTEGER, vrIpxHoldDownInterval Unsigned32 } vrIpxNetworkNumber OBJECT-TYPE SYNTAX DashedHexString (SIZE (1..4)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute indicates the internal network number portion of the IPX address. This network number must be unique within the internetwork and is necessary to determine master/slave relationships during IPXWAN negotiations." ::= { vrIpxProvEntry 1 } vrIpxMaxPathSplits OBJECT-TYPE SYNTAX Unsigned32 (1..4) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute indicates the maximum number of paths with equal routing metric value which this instance of IPX may split between when forwarding packets." DEFVAL { 1 } ::= { vrIpxProvEntry 2 } vrIpxMaxHops OBJECT-TYPE SYNTAX Unsigned32 (1..64) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute indicates the maximum number of hops a packet may take." DEFVAL { 16 } ::= { vrIpxProvEntry 3 } vrIpxRipUpdateInterval OBJECT-TYPE SYNTAX Unsigned32 (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "The RIP periodic update interval, in seconds." DEFVAL { 60 } ::= { vrIpxProvEntry 4 } vrIpxSapUpdateInterval OBJECT-TYPE SYNTAX Unsigned32 (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "The SAP periodic update interval, in seconds." DEFVAL { 60 } ::= { vrIpxProvEntry 5 } vrIpxControlDelay OBJECT-TYPE SYNTAX Unsigned32 (1..30) ACCESS read-write STATUS mandatory DESCRIPTION "The delay, in microsecs, between receiving a request from a client and sending a response. This router is significantly faster than some Ipx clients. If a problem is being experienced between a router and an Ipx client, it might be resolved by changing the controlDelay." DEFVAL { 1 } ::= { vrIpxProvEntry 6 } vrIpxUpdateDelay OBJECT-TYPE SYNTAX Unsigned32 (55..500) ACCESS read-write STATUS mandatory DESCRIPTION "The delay, in milliseconds, between sending consecutive (RIP and/or SAP) packets. 55 milliseconds is the minimum specified in the Ipx Router Specification." DEFVAL { 55 } ::= { vrIpxProvEntry 7 } vrIpxRipAgeMultiplier OBJECT-TYPE SYNTAX Unsigned32 (1..10) ACCESS read-write STATUS mandatory DESCRIPTION "After this many Rip Update intervals unrefreshed Rip information is considered expired." DEFVAL { 3 } ::= { vrIpxProvEntry 8 } vrIpxSapAgeMultiplier OBJECT-TYPE SYNTAX Unsigned32 (1..10) ACCESS read-write STATUS mandatory DESCRIPTION "After this many SAP Update intervals unrefreshed SAP information is considered expired." DEFVAL { 3 } ::= { vrIpxProvEntry 9 } vrIpxDamping OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether damping is applied. Damping refers to the damping of incoming RIP and SAP requests. It handles cases where a rogue client or server is making an extraodinary number of requests. With damping set to disabled, the switch will reply to all requests with no check for rogue nodes.With damping set to enabled, the switch will not reply to a request if the same node made more than the allowable number of requests within 10 seconds. The maximum number of requests to damp at is specified by the following provisionable attributes: ripMaxDampedGeneralRequest, ripMaxDampedSpecificRequests, sapMaxDampedGeneralRequests, sapMaxDampedSpecificRequests." DEFVAL { enabled } ::= { vrIpxProvEntry 10 } vrIpxRipMaxDampedGeneralRequests OBJECT-TYPE SYNTAX Unsigned32 (1..100) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is only used when the attribute damping is enabled. It is used to limit the average rate at which the switch responds to general RIP requests. If more than this number are received within a ten second interval, the first ripMaxDampedGeneralRequests are responded to and the remainder are ignored." DEFVAL { 1 } ::= { vrIpxProvEntry 11 } vrIpxRipMaxDampedSpecificRequests OBJECT-TYPE SYNTAX Unsigned32 (1..100) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is only used when the attribute damping is enabled. It is used to limit the average rate at which the switch responds to specific RIP requests. If more than this number are received within a ten second interval, the first ripMaxDampedSpecificRequests are responded to and the remainder are ignored." DEFVAL { 4 } ::= { vrIpxProvEntry 12 } vrIpxSapMaxDampedGeneralRequests OBJECT-TYPE SYNTAX Unsigned32 (1..100) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is only used when the attribute damping is enabled. It is used to limit the average rate at which the switch responds to general SAP requests. If more than this number are received within a ten second interval, the first sapMaxDampedGeneralRequests are responded to and the remainder are ignored." DEFVAL { 1 } ::= { vrIpxProvEntry 13 } vrIpxSapMaxDampedSpecificRequests OBJECT-TYPE SYNTAX Unsigned32 (1..100) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is only used when the attribute damping is enabled. It is used to limit the average rate at which the switch responds to specific SAP requests. If more than this number are received within a ten second interval, the first sapMaxDampedSpecificRequests are responded to and the remainder are ignored." DEFVAL { 4 } ::= { vrIpxProvEntry 14 } vrIpxInitialGeneralRequests OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether the RIP and SAP general requests are sent out a port when the port first comes up. If this attribute is enabled the initial requests will be made; whereas if the attribute is disabled the initial requests will not be made. This attribute may be disabled in order to avoid the traffic resulting within the network from these initial requests and the ensuing responses. With the initial request disabled, the switch will learn about other network segments off of the IPX ports via the periodic broadcasts which are received on those port." DEFVAL { enabled } ::= { vrIpxProvEntry 15 } vrIpxHoldDownInterval OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies an interval, after a network is removed from the route table, during which other incoming route updates for the same network will be ignored. The use of this interval prevents the slow convergence which results when switches that receive late network down broadcasts advertise false routes." DEFVAL { 10 } ::= { vrIpxProvEntry 16 } vrIpxStateTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpxStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { vrIpx 103 } vrIpxStateEntry OBJECT-TYPE SYNTAX VrIpxStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpxStateTable." INDEX { vrIndex, vrIpxIndex } ::= { vrIpxStateTable 1 } VrIpxStateEntry ::= SEQUENCE { vrIpxAdminState INTEGER, vrIpxOperationalState INTEGER, vrIpxUsageState INTEGER } vrIpxAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { vrIpxStateEntry 1 } vrIpxOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { vrIpxStateEntry 2 } vrIpxUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { vrIpxStateEntry 3 } vrIpxOperStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpxOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Operational Status attribute. This attribute defines the current operational state of this component." ::= { vrIpx 104 } vrIpxOperStatusEntry OBJECT-TYPE SYNTAX VrIpxOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpxOperStatusTable." INDEX { vrIndex, vrIpxIndex } ::= { vrIpxOperStatusTable 1 } VrIpxOperStatusEntry ::= SEQUENCE { vrIpxSnmpOperStatus INTEGER } vrIpxSnmpOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { vrIpxOperStatusEntry 1 } vrIpxOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpxOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains IPX related operational attributes." ::= { vrIpx 105 } vrIpxOperEntry OBJECT-TYPE SYNTAX VrIpxOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpxOperTable." INDEX { vrIndex, vrIpxIndex } ::= { vrIpxOperTable 1 } VrIpxOperEntry ::= SEQUENCE { vrIpxProtocolPortCount Unsigned32, vrIpxDestinationCount Unsigned32, vrIpxServicesCount Unsigned32 } vrIpxProtocolPortCount OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The number of portsknown to this instance of Ipx." DEFVAL { 0 } ::= { vrIpxOperEntry 1 } vrIpxDestinationCount OBJECT-TYPE SYNTAX Unsigned32 (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The number of currently reachable destinations known to Ipx." DEFVAL { 65535 } ::= { vrIpxOperEntry 2 } vrIpxServicesCount OBJECT-TYPE SYNTAX Unsigned32 (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The number of Services known to Ipx." DEFVAL { 65535 } ::= { vrIpxOperEntry 3 } vrIpxStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpxStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains IPX related statistics on the CP." ::= { vrIpx 107 } vrIpxStatsEntry OBJECT-TYPE SYNTAX VrIpxStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpxStatsTable." INDEX { vrIndex, vrIpxIndex } ::= { vrIpxStatsTable 1 } VrIpxStatsEntry ::= SEQUENCE { vrIpxInReceives Counter32, vrIpxInHeaderErrors Counter32, vrIpxInUnknownSocket Counter32, vrIpxInDiscards Counter32, vrIpxInBadChecksums Counter32, vrIpxInDelivers Counter32, vrIpxNoRoutes Counter32, vrIpxOutRequests Counter32, vrIpxOutMalformedRequests Counter32, vrIpxOutDiscards Counter32, vrIpxOutPackets Counter32, vrIpxInTooManyHops Counter32, vrIpxInFiltered Counter32, vrIpxInNetBIOS Counter32, vrIpxForwarded Counter32, vrIpxOutFiltered Counter32 } vrIpxInReceives OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of IPX packets received, including those received in error. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { vrIpxStatsEntry 1 } vrIpxInHeaderErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of IPX packets discarded due to errors in their headers, including any IPX packet with a size less than the minimum of 30 bytes. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { vrIpxStatsEntry 2 } vrIpxInUnknownSocket OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of IPX packets discarded because the destination socket was not open. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { vrIpxStatsEntry 3 } vrIpxInDiscards OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of packets received but discarded due to reasons other than those accounted for by inHeaderErrors and inUnknownSocket. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { vrIpxStatsEntry 4 } vrIpxInBadChecksums OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of packets received with incorrect checksums. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { vrIpxStatsEntry 5 } vrIpxInDelivers OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of IPX packets delivered locally, including packets from local applications. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { vrIpxStatsEntry 6 } vrIpxNoRoutes OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of times no route to a destination was found. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { vrIpxStatsEntry 7 } vrIpxOutRequests OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of IPX packets supplied locally for transmission, not including any packets counted in the forwarded attribute. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { vrIpxStatsEntry 8 } vrIpxOutMalformedRequests OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of outgoing packets supplied locally that contained errors in their structure. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { vrIpxStatsEntry 9 } vrIpxOutDiscards OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of outgoing IPX packets discarded due to reasons other than those accounted for in outMalformedRequests or outFiltered. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { vrIpxStatsEntry 10 } vrIpxOutPackets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The total number of IPX packets transmitted. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { vrIpxStatsEntry 11 } vrIpxInTooManyHops OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Number of packets discarded due to exceeding the maxHops value. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { vrIpxStatsEntry 12 } vrIpxInFiltered OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of incoming IPX packets discarded due to filtering. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { vrIpxStatsEntry 13 } vrIpxInNetBIOS OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of NetBIOS packets received. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { vrIpxStatsEntry 14 } vrIpxForwarded OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of IPX packets forwarded. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { vrIpxStatsEntry 15 } vrIpxOutFiltered OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of outgoing packets discarded due to filtering. This also includes the number of forwarded packets filtered. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { vrIpxStatsEntry 16 } -- Vr/ Ipx Rip -- The Routing Information Protocol (RIP) exchanges IPX route -- information that is used to maintain the routing table. Routing -- information is added to the route table for all known networks whose -- hops count is equal to or less than the value provisioned for maxHops, -- and is propagated for networks less than maxHops away. vrIpxRip OBJECT IDENTIFIER ::= { vrIpx 2 } vrIpxRipRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpxRipRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpxRip components." ::= { vrIpxRip 1 } vrIpxRipRowStatusEntry OBJECT-TYPE SYNTAX VrIpxRipRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpxRip component." INDEX { vrIndex, vrIpxIndex, vrIpxRipIndex } ::= { vrIpxRipRowStatusTable 1 } VrIpxRipRowStatusEntry ::= SEQUENCE { vrIpxRipRowStatus RowStatus, vrIpxRipComponentName DisplayString, vrIpxRipStorageType StorageType, vrIpxRipIndex NonReplicated } vrIpxRipRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpxRip components. These components cannot be added nor deleted." ::= { vrIpxRipRowStatusEntry 1 } vrIpxRipComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpxRipRowStatusEntry 2 } vrIpxRipStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpxRip tables." ::= { vrIpxRipRowStatusEntry 4 } vrIpxRipIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpxRip tables." ::= { vrIpxRipRowStatusEntry 10 } vrIpxRipStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpxRipStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IPX statistics related to the RIP protocol." ::= { vrIpxRip 10 } vrIpxRipStatsEntry OBJECT-TYPE SYNTAX VrIpxRipStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpxRipStatsTable." INDEX { vrIndex, vrIpxIndex, vrIpxRipIndex } ::= { vrIpxRipStatsTable 1 } VrIpxRipStatsEntry ::= SEQUENCE { vrIpxRipRipIn Counter32, vrIpxRipRipOut Counter32, vrIpxRipRipIncorrectPackets Counter32 } vrIpxRipRipIn OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of IPX RIP packets received. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { vrIpxRipStatsEntry 1 } vrIpxRipRipOut OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of RIP packets locally generated and sent out. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { vrIpxRipStatsEntry 2 } vrIpxRipRipIncorrectPackets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of times an incorrectly formatted RIP packet was received. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { vrIpxRipStatsEntry 3 } -- Vr/ Ipx Rip RipFilter -- RIP filters remove the specified service advertisements from RIP packets -- passing through this IPX router instance thereby filtering knowledge of -- those network routes. This is done by telling the router to ignore certain -- advertised networks present in incoming RIP packet tuples and/or omit -- certain networks from outgoing RIP packet advertisements. The -- networks are indicated by the attributes hops, ticks, networkNumber, -- node and port. For a given filter, networks matching all the attributes of -- that filter are filtered or passed depending on the disposition of the filter. -- RIP filters are applied as input or output filters via the RipApplyEntry -- component. vrIpxRipRFltr OBJECT IDENTIFIER ::= { vrIpxRip 2 } vrIpxRipRFltrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpxRipRFltrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpxRipRFltr components." ::= { vrIpxRipRFltr 1 } vrIpxRipRFltrRowStatusEntry OBJECT-TYPE SYNTAX VrIpxRipRFltrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpxRipRFltr component." INDEX { vrIndex, vrIpxIndex, vrIpxRipIndex, vrIpxRipRFltrIdentifierIndex } ::= { vrIpxRipRFltrRowStatusTable 1 } VrIpxRipRFltrRowStatusEntry ::= SEQUENCE { vrIpxRipRFltrRowStatus RowStatus, vrIpxRipRFltrComponentName DisplayString, vrIpxRipRFltrStorageType StorageType, vrIpxRipRFltrIdentifierIndex Integer32 } vrIpxRipRFltrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpxRipRFltr components. These components can be added and deleted." ::= { vrIpxRipRFltrRowStatusEntry 1 } vrIpxRipRFltrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpxRipRFltrRowStatusEntry 2 } vrIpxRipRFltrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpxRipRFltr tables." ::= { vrIpxRipRFltrRowStatusEntry 4 } vrIpxRipRFltrIdentifierIndex OBJECT-TYPE SYNTAX Integer32 (1..268435455) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpxRipRFltr tables." ::= { vrIpxRipRFltrRowStatusEntry 10 } vrIpxRipRFltrProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpxRipRFltrProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the provisionable attribute group for RipFilter." ::= { vrIpxRipRFltr 10 } vrIpxRipRFltrProvEntry OBJECT-TYPE SYNTAX VrIpxRipRFltrProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpxRipRFltrProvTable." INDEX { vrIndex, vrIpxIndex, vrIpxRipIndex, vrIpxRipRFltrIdentifierIndex } ::= { vrIpxRipRFltrProvTable 1 } VrIpxRipRFltrProvEntry ::= SEQUENCE { vrIpxRipRFltrHops AsciiString, vrIpxRipRFltrTicks AsciiString, vrIpxRipRFltrNetworkNumber AsciiString, vrIpxRipRFltrNode AsciiString, vrIpxRipRFltrPort AsciiString, vrIpxRipRFltrDisposition INTEGER } vrIpxRipRFltrHops OBJECT-TYPE SYNTAX AsciiString (SIZE (0..4)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the distance in terms of number of hops. Networks in RIP packets which are the specified distance away from the switch are filtered or passed depending on the disposition of the filter. A hops value preceded by an equality operator(=), less than operator(<) or greater than operator(>) should be interpreted as matching all RIP packet tuples which are an equal, smaller or greater distance, respectively, away from the switch than the hops value specified. For a given filter, only networks matching all the specified attributes of that filter are filtered or passed depending on the disposition of the filter. The number of hops is specified as a decimal number between 0 and 999." ::= { vrIpxRipRFltrProvEntry 1 } vrIpxRipRFltrTicks OBJECT-TYPE SYNTAX AsciiString (SIZE (0..4)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the distance in terms of delay in ticks. A tick is 1/ 18 of a second. Networks in RIP packets which are the specified distance away from the switch are filtered or passed depending on the disposition of the filter. A ticks value preceded by a equality operator(=), less than operator(<) or greater than operator(>) should be interpreted as matching all RIP packet tuples which are an equal, greater or lower delay, respectively, away from the switch than the ticks value specified. For a given filter, only networks matching all the specified attributes of that filter are filtered or passed depending on the disposition of the filter. The ticks value is specified as a decimal number between 0 and 999." ::= { vrIpxRipRFltrProvEntry 2 } vrIpxRipRFltrNetworkNumber OBJECT-TYPE SYNTAX AsciiString (SIZE (0..12)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the network number of matching networks in RIP packets to be filtered or passed depending on the disposition of the filter. The network number can be entered either as a dashed hex string or a string of hex digits entered in pairs of hex digits up to a maximum length of 8 digits; in addition to hex digits, use of the character '?' to indicate wildcarding is allowed. (For example a valid network number would be ff-ff-ff-?? or ffffff??). Wildcard characters may be used only in pairs to replace a pair of hex digits. Filters with a network number preceded by a caret (^) should be interpreted as matching all RIP packet tuples except for the tuples with this network number. For a given filter, only networks matching all the specified attributes of that filter are filtered or passed depending on the disposition of the filter." ::= { vrIpxRipRFltrProvEntry 3 } vrIpxRipRFltrNode OBJECT-TYPE SYNTAX AsciiString (SIZE (0..18)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the node portion in the source IPX address (that is, the MAC address or circuit ID) of received RIP packets for which the contained network tuples should be filtered or passed depending on the disposition of the filter. This attribute is only valid for filters applied to a port in the input direction and will be ignored if the filter is applied in the output direction.The node number can be entered either as a dashed hex string or a string of hex digits entered in pairs of hex digits up to a maximum length of 12 digits; in addition to hex digits, use of the character '?' to indicate wildcarding is allowed. (For example a valid node number would be 00-20-??-??-??-?? or 0020???????? ). Wildcard characters may be used only in pairs to replace a pair of hex digits. A node number preceded by a caret (^) should be interpreted as matching all RIP packets' network tuples except for the RIP packets with this source node address. For a given filter, only networks matching all the specified attributes of that filter are filtered or passed depending on the disposition of the filter." ::= { vrIpxRipRFltrProvEntry 4 } vrIpxRipRFltrPort OBJECT-TYPE SYNTAX AsciiString (SIZE (0..18)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the name of a protocol port whereby networks learned over this port are to be filtered or passed depending on the disposition of the filter. This attribute is only valid for filters applied to a port in the output direction and will be ignored if the filter is applied in the input direction. This attribute is entered as an ascii string and must correspond to a name of a provisioned protocol port. A port name preceded by a caret (^) should be interpreted as matching all RIP packet tuples except for those learned on this port. For a given filter, only networks matching all the specified attributes of that filter are filtered or passed depending on the disposition of the filter." ::= { vrIpxRipRFltrProvEntry 5 } vrIpxRipRFltrDisposition OBJECT-TYPE SYNTAX INTEGER { pass(1), filter(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute indicates a reversal of the filter pattern match. If the value is pass, then matching filters will cause the RIP packet tuple to be passed. If the value is filter, then matching filters will cause the RIP packet tuple to be filtered." DEFVAL { filter } ::= { vrIpxRipRFltrProvEntry 6 } vrIpxRipRFltrOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpxRipRFltrOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the operational attribute group for IpxRipFilter." ::= { vrIpxRipRFltr 11 } vrIpxRipRFltrOperEntry OBJECT-TYPE SYNTAX VrIpxRipRFltrOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpxRipRFltrOperTable." INDEX { vrIndex, vrIpxIndex, vrIpxRipIndex, vrIpxRipRFltrIdentifierIndex } ::= { vrIpxRipRFltrOperTable 1 } VrIpxRipRFltrOperEntry ::= SEQUENCE { vrIpxRipRFltrNumberOfApplyEntries Gauge32 } vrIpxRipRFltrNumberOfApplyEntries OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of times this filter is referenced by a RipApplyEntry. If zero, this filter is not applied on any ports." DEFVAL { 0 } ::= { vrIpxRipRFltrOperEntry 1 } -- Vr/ Ipx Rip RipFilter RipApplyEntry/ -- This component contains a list of RIP filters that have been applied to -- each IPX port and information pertaining to each application of such -- RIP filters. Filters should be applied to ports such that the most specific -- filter has the lowest identifier while the least specific filter has the -- highest identifier. It should be kept in mind that the filter with the lowest -- filter identifier that matches will decide based on its disposition whether -- the network tuple is passed or filtered. vrIpxRipRipApp OBJECT IDENTIFIER ::= { vrIpxRip 3 } vrIpxRipRipAppRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpxRipRipAppRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpxRipRipApp components." ::= { vrIpxRipRipApp 1 } vrIpxRipRipAppRowStatusEntry OBJECT-TYPE SYNTAX VrIpxRipRipAppRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpxRipRipApp component." INDEX { vrIndex, vrIpxIndex, vrIpxRipIndex, vrIpxRipRipAppProtocolPortNameIndex, vrIpxRipRipAppFilterIdentifierIndex } ::= { vrIpxRipRipAppRowStatusTable 1 } VrIpxRipRipAppRowStatusEntry ::= SEQUENCE { vrIpxRipRipAppRowStatus RowStatus, vrIpxRipRipAppComponentName DisplayString, vrIpxRipRipAppStorageType StorageType, vrIpxRipRipAppProtocolPortNameIndex AsciiStringIndex, vrIpxRipRipAppFilterIdentifierIndex Integer32 } vrIpxRipRipAppRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpxRipRipApp components. These components can be added and deleted." ::= { vrIpxRipRipAppRowStatusEntry 1 } vrIpxRipRipAppComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpxRipRipAppRowStatusEntry 2 } vrIpxRipRipAppStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpxRipRipApp tables." ::= { vrIpxRipRipAppRowStatusEntry 4 } vrIpxRipRipAppProtocolPortNameIndex OBJECT-TYPE SYNTAX AsciiStringIndex (SIZE (1..20)) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpxRipRipApp tables." ::= { vrIpxRipRipAppRowStatusEntry 10 } vrIpxRipRipAppFilterIdentifierIndex OBJECT-TYPE SYNTAX Integer32 (1..268435455) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpxRipRipApp tables." ::= { vrIpxRipRipAppRowStatusEntry 11 } vrIpxRipRipAppProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpxRipRipAppProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This is the RipApplyEntry provisionable group of attributes." ::= { vrIpxRipRipApp 10 } vrIpxRipRipAppProvEntry OBJECT-TYPE SYNTAX VrIpxRipRipAppProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpxRipRipAppProvTable." INDEX { vrIndex, vrIpxIndex, vrIpxRipIndex, vrIpxRipRipAppProtocolPortNameIndex, vrIpxRipRipAppFilterIdentifierIndex } ::= { vrIpxRipRipAppProvTable 1 } VrIpxRipRipAppProvEntry ::= SEQUENCE { vrIpxRipRipAppDirection INTEGER } vrIpxRipRipAppDirection OBJECT-TYPE SYNTAX INTEGER { none(0), output(1), input(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether this RIP filter is applied as an input filter or an output filter. If set to none, this indicates that the filter, though applied to the port, is not currently active in either direction." DEFVAL { none } ::= { vrIpxRipRipAppProvEntry 1 } -- Vr/ Ipx Sap -- The Service Advertising Protocol (SAP) exchanges information on the -- network about available network services (for example file services or -- print services). Service information is kept for services residing on -- networks which are known to the router via the routing table (RIP -- protocol). That is, services will be added to the services table only if a -- route to them has been previously discovered via RIP and entered in the -- route table. vrIpxSap OBJECT IDENTIFIER ::= { vrIpx 3 } vrIpxSapRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpxSapRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpxSap components." ::= { vrIpxSap 1 } vrIpxSapRowStatusEntry OBJECT-TYPE SYNTAX VrIpxSapRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpxSap component." INDEX { vrIndex, vrIpxIndex, vrIpxSapIndex } ::= { vrIpxSapRowStatusTable 1 } VrIpxSapRowStatusEntry ::= SEQUENCE { vrIpxSapRowStatus RowStatus, vrIpxSapComponentName DisplayString, vrIpxSapStorageType StorageType, vrIpxSapIndex NonReplicated } vrIpxSapRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpxSap components. These components cannot be added nor deleted." ::= { vrIpxSapRowStatusEntry 1 } vrIpxSapComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpxSapRowStatusEntry 2 } vrIpxSapStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpxSap tables." ::= { vrIpxSapRowStatusEntry 4 } vrIpxSapIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpxSap tables." ::= { vrIpxSapRowStatusEntry 10 } vrIpxSapStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpxSapStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IPX statistics specific to the SAP protocol." ::= { vrIpxSap 10 } vrIpxSapStatsEntry OBJECT-TYPE SYNTAX VrIpxSapStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpxSapStatsTable." INDEX { vrIndex, vrIpxIndex, vrIpxSapIndex } ::= { vrIpxSapStatsTable 1 } VrIpxSapStatsEntry ::= SEQUENCE { vrIpxSapSapIn Counter32, vrIpxSapSapOut Counter32, vrIpxSapSapIncorrectPackets Counter32 } vrIpxSapSapIn OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SAP packets received. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { vrIpxSapStatsEntry 1 } vrIpxSapSapOut OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The total number of SAP packets locally generated and sent out. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { vrIpxSapStatsEntry 2 } vrIpxSapSapIncorrectPackets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of times an incorrectly formatted SAP packet was received. This counter wraps around to zero after reaching the maximum value of 4294967295." ::= { vrIpxSapStatsEntry 3 } -- Vr/ Ipx Sap Sfltr -- SAP filters remove the specified service advertisements from SAP -- packets passing through this IPX router instance thereby filtering -- knowledge of those services. This is done by telling the router to ignore -- certain advertised services present in incoming SAP packet tuples and/or -- omit certain services from outgoing SAP packet advertisements. The -- services are indicated by the attributes type, name, networkNumber, and -- node. For a given filter, services matching all the attributes of that filter -- are filtered. SAP filters are applied as input or output filters via the -- IpxSapApplyEntry component. vrIpxSapSFltr OBJECT IDENTIFIER ::= { vrIpxSap 2 } vrIpxSapSFltrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpxSapSFltrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpxSapSFltr components." ::= { vrIpxSapSFltr 1 } vrIpxSapSFltrRowStatusEntry OBJECT-TYPE SYNTAX VrIpxSapSFltrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpxSapSFltr component." INDEX { vrIndex, vrIpxIndex, vrIpxSapIndex, vrIpxSapSFltrIdentifierIndex } ::= { vrIpxSapSFltrRowStatusTable 1 } VrIpxSapSFltrRowStatusEntry ::= SEQUENCE { vrIpxSapSFltrRowStatus RowStatus, vrIpxSapSFltrComponentName DisplayString, vrIpxSapSFltrStorageType StorageType, vrIpxSapSFltrIdentifierIndex Integer32 } vrIpxSapSFltrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpxSapSFltr components. These components can be added and deleted." ::= { vrIpxSapSFltrRowStatusEntry 1 } vrIpxSapSFltrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpxSapSFltrRowStatusEntry 2 } vrIpxSapSFltrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpxSapSFltr tables." ::= { vrIpxSapSFltrRowStatusEntry 4 } vrIpxSapSFltrIdentifierIndex OBJECT-TYPE SYNTAX Integer32 (1..268435455) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpxSapSFltr tables." ::= { vrIpxSapSFltrRowStatusEntry 10 } vrIpxSapSFltrProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpxSapSFltrProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The provisionable attribute group for SapFilter." ::= { vrIpxSapSFltr 10 } vrIpxSapSFltrProvEntry OBJECT-TYPE SYNTAX VrIpxSapSFltrProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpxSapSFltrProvTable." INDEX { vrIndex, vrIpxIndex, vrIpxSapIndex, vrIpxSapSFltrIdentifierIndex } ::= { vrIpxSapSFltrProvTable 1 } VrIpxSapSFltrProvEntry ::= SEQUENCE { vrIpxSapSFltrType AsciiString, vrIpxSapSFltrName AsciiString, vrIpxSapSFltrNetworkNumber AsciiString, vrIpxSapSFltrNode AsciiString, vrIpxSapSFltrDisposition INTEGER } vrIpxSapSFltrType OBJECT-TYPE SYNTAX AsciiString (SIZE (0..6)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the Novell Service type of the services to be filtered from the SAP packets. The type can be entered either as a dashed hex string or a string of hex digits entered in pairs of hex digits up to a maximum length of 4 digits. (For example a valid type would be ff-ff or ffff). A type preceded by a caret(^) should be interpreted as filtering all SAP packets except for those with this type." ::= { vrIpxSapSFltrProvEntry 1 } vrIpxSapSFltrName OBJECT-TYPE SYNTAX AsciiString (SIZE (0..48)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the readable name of the service to be filtered from SAP packets. The name can be 47 characters or less. This does not include the caret (^) character which precedes the name. A name preceded by a caret (^) should be interpreted as filtering all SAP packets except for the ones with this name." ::= { vrIpxSapSFltrProvEntry 2 } vrIpxSapSFltrNetworkNumber OBJECT-TYPE SYNTAX AsciiString (SIZE (0..12)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the network number of the service to be filtered from SAP packets. The network number can be entered either as a dashed hex string or a string of hex digits entered in pairs of hex digits up to a maximum length of 8 digits. (For example a valid network number would be ff-ff-ff-ff or ffffffff). A network number preceded by a caret (^) should be interpreted as filtering all SAP packets except for the ones with this network number." ::= { vrIpxSapSFltrProvEntry 3 } vrIpxSapSFltrNode OBJECT-TYPE SYNTAX AsciiString (SIZE (0..18)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the node portion of the IPX address of the service to be filtered from SAP packets. The node number can be entered either as a dashed hex string or a string of hex digits entered in pairs of hex digits up to a maximum length of 12 digits.. (For example a valid node number would be ff-ff-ff-ff-ff-ff or ffffffffffff). A node number preceded by a caret (^) should be interpreted as filtering all SAP packets except for the ones with this node number." ::= { vrIpxSapSFltrProvEntry 4 } vrIpxSapSFltrDisposition OBJECT-TYPE SYNTAX INTEGER { pass(1), filter(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates a reversal of the filter pattern match." DEFVAL { filter } ::= { vrIpxSapSFltrProvEntry 5 } vrIpxSapSFltrOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpxSapSFltrOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The operational attribute group for IpxSapFilter." ::= { vrIpxSapSFltr 11 } vrIpxSapSFltrOperEntry OBJECT-TYPE SYNTAX VrIpxSapSFltrOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpxSapSFltrOperTable." INDEX { vrIndex, vrIpxIndex, vrIpxSapIndex, vrIpxSapSFltrIdentifierIndex } ::= { vrIpxSapSFltrOperTable 1 } VrIpxSapSFltrOperEntry ::= SEQUENCE { vrIpxSapSFltrNumberOfApplyEntries Gauge32 } vrIpxSapSFltrNumberOfApplyEntries OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "The number of times this filter appears in IpxSapApplyEntry. If zero, this filter is not applied on any ports." DEFVAL { 0 } ::= { vrIpxSapSFltrOperEntry 1 } -- Vr/ Ipx Sap SapApp -- This component contains a list of SAP filters that have been applied to -- each IPX port and information pertaining to each application of such -- SAP filters. vrIpxSapSapApp OBJECT IDENTIFIER ::= { vrIpxSap 3 } vrIpxSapSapAppRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpxSapSapAppRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpxSapSapApp components." ::= { vrIpxSapSapApp 1 } vrIpxSapSapAppRowStatusEntry OBJECT-TYPE SYNTAX VrIpxSapSapAppRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpxSapSapApp component." INDEX { vrIndex, vrIpxIndex, vrIpxSapIndex, vrIpxSapSapAppProtocolPortNameIndex, vrIpxSapSapAppFilterIdentifierIndex } ::= { vrIpxSapSapAppRowStatusTable 1 } VrIpxSapSapAppRowStatusEntry ::= SEQUENCE { vrIpxSapSapAppRowStatus RowStatus, vrIpxSapSapAppComponentName DisplayString, vrIpxSapSapAppStorageType StorageType, vrIpxSapSapAppProtocolPortNameIndex AsciiStringIndex, vrIpxSapSapAppFilterIdentifierIndex Integer32 } vrIpxSapSapAppRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpxSapSapApp components. These components can be added and deleted." ::= { vrIpxSapSapAppRowStatusEntry 1 } vrIpxSapSapAppComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpxSapSapAppRowStatusEntry 2 } vrIpxSapSapAppStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpxSapSapApp tables." ::= { vrIpxSapSapAppRowStatusEntry 4 } vrIpxSapSapAppProtocolPortNameIndex OBJECT-TYPE SYNTAX AsciiStringIndex (SIZE (1..20)) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpxSapSapApp tables." ::= { vrIpxSapSapAppRowStatusEntry 10 } vrIpxSapSapAppFilterIdentifierIndex OBJECT-TYPE SYNTAX Integer32 (1..268435455) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpxSapSapApp tables." ::= { vrIpxSapSapAppRowStatusEntry 11 } vrIpxSapSapAppProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpxSapSapAppProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The IpxSapApplyEntry provisionable group of attributes." ::= { vrIpxSapSapApp 10 } vrIpxSapSapAppProvEntry OBJECT-TYPE SYNTAX VrIpxSapSapAppProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpxSapSapAppProvTable." INDEX { vrIndex, vrIpxIndex, vrIpxSapIndex, vrIpxSapSapAppProtocolPortNameIndex, vrIpxSapSapAppFilterIdentifierIndex } ::= { vrIpxSapSapAppProvTable 1 } VrIpxSapSapAppProvEntry ::= SEQUENCE { vrIpxSapSapAppDirection INTEGER } vrIpxSapSapAppDirection OBJECT-TYPE SYNTAX INTEGER { none(0), output(1), input(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether this SAP filter is applied as an input filter or an output filter." DEFVAL { none } ::= { vrIpxSapSapAppProvEntry 1 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- Vr/ Ipx Fwd -- The forwarding component represents an entry of the forwarding table. -- It contains forwarding information about all known destinations with -- each entry in the forwarding table being information pertaining to a -- unique IPX destination network number. vrIpxFwd OBJECT IDENTIFIER ::= { vrIpx 4 } vrIpxFwdRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpxFwdRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpxFwd components." ::= { vrIpxFwd 1 } vrIpxFwdRowStatusEntry OBJECT-TYPE SYNTAX VrIpxFwdRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpxFwd component." INDEX { vrIndex, vrIpxIndex, vrIpxFwdNetworkNumberIndex } ::= { vrIpxFwdRowStatusTable 1 } VrIpxFwdRowStatusEntry ::= SEQUENCE { vrIpxFwdRowStatus RowStatus, vrIpxFwdComponentName DisplayString, vrIpxFwdStorageType StorageType, vrIpxFwdNetworkNumberIndex DashedHexString } vrIpxFwdRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpxFwd components. These components cannot be added nor deleted." ::= { vrIpxFwdRowStatusEntry 1 } vrIpxFwdComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpxFwdRowStatusEntry 2 } vrIpxFwdStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpxFwd tables." ::= { vrIpxFwdRowStatusEntry 4 } vrIpxFwdNetworkNumberIndex OBJECT-TYPE SYNTAX DashedHexString (SIZE (1..4)) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpxFwd tables." ::= { vrIpxFwdRowStatusEntry 10 } vrIpxFwdOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpxFwdOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** IpxForwarding operational attributes." ::= { vrIpxFwd 10 } vrIpxFwdOperEntry OBJECT-TYPE SYNTAX VrIpxFwdOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpxFwdOperTable." INDEX { vrIndex, vrIpxIndex, vrIpxFwdNetworkNumberIndex } ::= { vrIpxFwdOperTable 1 } VrIpxFwdOperEntry ::= SEQUENCE { vrIpxFwdProtocol INTEGER, vrIpxFwdTicks Unsigned32, vrIpxFwdHopCount Gauge32, vrIpxFwdProtocolPortId AsciiString, vrIpxFwdNextHopPhysAddress PhysAddress, vrIpxFwdNextHopNetworkNumber DashedHexString } vrIpxFwdProtocol OBJECT-TYPE SYNTAX INTEGER { other(1), local(2), rip(3), nlsp(4), static(5) } ACCESS read-only STATUS mandatory DESCRIPTION "The routing protocol from which knowledge of this destination was obtained." ::= { vrIpxFwdOperEntry 1 } vrIpxFwdTicks OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "The delay, in ticks, to reach this destination." ::= { vrIpxFwdOperEntry 2 } vrIpxFwdHopCount OBJECT-TYPE SYNTAX Gauge32 (1..64) ACCESS read-only STATUS mandatory DESCRIPTION "The number of hops required to reach this destination." ::= { vrIpxFwdOperEntry 3 } vrIpxFwdProtocolPortId OBJECT-TYPE SYNTAX AsciiString (SIZE (1..20)) ACCESS read-only STATUS mandatory DESCRIPTION "The unique identifier of the ProtocolPort used to reach the next hop." ::= { vrIpxFwdOperEntry 4 } vrIpxFwdNextHopPhysAddress OBJECT-TYPE SYNTAX PhysAddress (SIZE (1..6)) ACCESS read-only STATUS mandatory DESCRIPTION "The physical address of the next hop" ::= { vrIpxFwdOperEntry 5 } vrIpxFwdNextHopNetworkNumber OBJECT-TYPE SYNTAX DashedHexString (SIZE (1..4)) ACCESS read-only STATUS mandatory DESCRIPTION "The IPX network number of the next hop." ::= { vrIpxFwdOperEntry 6 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- Vr/ Ipx Srvc -- This is the top level component of the IPX services table, which is a list -- of the Novell services known to this IPX router instance. vrIpxSrvc OBJECT IDENTIFIER ::= { vrIpx 5 } vrIpxSrvcRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpxSrvcRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpxSrvc components." ::= { vrIpxSrvc 1 } vrIpxSrvcRowStatusEntry OBJECT-TYPE SYNTAX VrIpxSrvcRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpxSrvc component." INDEX { vrIndex, vrIpxIndex, vrIpxSrvcNetworkNumberIndex, vrIpxSrvcNodeIndex, vrIpxSrvcTypeIndex, vrIpxSrvcNameIndex } ::= { vrIpxSrvcRowStatusTable 1 } VrIpxSrvcRowStatusEntry ::= SEQUENCE { vrIpxSrvcRowStatus RowStatus, vrIpxSrvcComponentName DisplayString, vrIpxSrvcStorageType StorageType, vrIpxSrvcNetworkNumberIndex DashedHexString, vrIpxSrvcNodeIndex DashedHexString, vrIpxSrvcTypeIndex Integer32, vrIpxSrvcNameIndex AsciiStringIndex } vrIpxSrvcRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpxSrvc components. These components cannot be added nor deleted." ::= { vrIpxSrvcRowStatusEntry 1 } vrIpxSrvcComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpxSrvcRowStatusEntry 2 } vrIpxSrvcStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpxSrvc tables." ::= { vrIpxSrvcRowStatusEntry 4 } vrIpxSrvcNetworkNumberIndex OBJECT-TYPE SYNTAX DashedHexString (SIZE (1..4)) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpxSrvc tables." ::= { vrIpxSrvcRowStatusEntry 10 } vrIpxSrvcNodeIndex OBJECT-TYPE SYNTAX DashedHexString (SIZE (1..6)) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpxSrvc tables." ::= { vrIpxSrvcRowStatusEntry 11 } vrIpxSrvcTypeIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpxSrvc tables." ::= { vrIpxSrvcRowStatusEntry 12 } vrIpxSrvcNameIndex OBJECT-TYPE SYNTAX AsciiStringIndex (SIZE (1..48)) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpxSrvc tables." ::= { vrIpxSrvcRowStatusEntry 13 } vrIpxSrvcOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpxSrvcOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** The Ipx Services Operational group." ::= { vrIpxSrvc 10 } vrIpxSrvcOperEntry OBJECT-TYPE SYNTAX VrIpxSrvcOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpxSrvcOperTable." INDEX { vrIndex, vrIpxIndex, vrIpxSrvcNetworkNumberIndex, vrIpxSrvcNodeIndex, vrIpxSrvcTypeIndex, vrIpxSrvcNameIndex } ::= { vrIpxSrvcOperTable 1 } VrIpxSrvcOperEntry ::= SEQUENCE { vrIpxSrvcSocket Hex, vrIpxSrvcProtocol INTEGER, vrIpxSrvcHopCount Gauge32 } vrIpxSrvcSocket OBJECT-TYPE SYNTAX Hex (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "Socket at which the service is available" ::= { vrIpxSrvcOperEntry 1 } vrIpxSrvcProtocol OBJECT-TYPE SYNTAX INTEGER { other(1), local(2), nlsp(4), static(5), sap(6) } ACCESS read-only STATUS mandatory DESCRIPTION "The protocol from which knowledge of this service was obtained." ::= { vrIpxSrvcOperEntry 2 } vrIpxSrvcHopCount OBJECT-TYPE SYNTAX Gauge32 (0..64) ACCESS read-only STATUS mandatory DESCRIPTION "Number of hops to the service." ::= { vrIpxSrvcOperEntry 3 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- Vr/ Ipx Adj -- This component provides adjacent node information available -- on a per ProtocolPort basis. This information is retrieved from, -- but formatted and displayed differently than, the information -- in the route table. It is useful for network configuration -- debugging. vrIpxAdj OBJECT IDENTIFIER ::= { vrIpx 6 } vrIpxAdjRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpxAdjRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpxAdj components." ::= { vrIpxAdj 1 } vrIpxAdjRowStatusEntry OBJECT-TYPE SYNTAX VrIpxAdjRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpxAdj component." INDEX { vrIndex, vrIpxIndex, vrIpxAdjProtocolPortIdentifierIndex, vrIpxAdjNetworkNumberIndex } ::= { vrIpxAdjRowStatusTable 1 } VrIpxAdjRowStatusEntry ::= SEQUENCE { vrIpxAdjRowStatus RowStatus, vrIpxAdjComponentName DisplayString, vrIpxAdjStorageType StorageType, vrIpxAdjProtocolPortIdentifierIndex AsciiStringIndex, vrIpxAdjNetworkNumberIndex DashedHexString } vrIpxAdjRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpxAdj components. These components cannot be added nor deleted." ::= { vrIpxAdjRowStatusEntry 1 } vrIpxAdjComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpxAdjRowStatusEntry 2 } vrIpxAdjStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpxAdj tables." ::= { vrIpxAdjRowStatusEntry 4 } vrIpxAdjProtocolPortIdentifierIndex OBJECT-TYPE SYNTAX AsciiStringIndex (SIZE (1..20)) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpxAdj tables." ::= { vrIpxAdjRowStatusEntry 10 } vrIpxAdjNetworkNumberIndex OBJECT-TYPE SYNTAX DashedHexString (SIZE (1..4)) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrIpxAdj tables." ::= { vrIpxAdjRowStatusEntry 11 } vrIpxAdjOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpxAdjOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** The Adjacencies operational group." ::= { vrIpxAdj 10 } vrIpxAdjOperEntry OBJECT-TYPE SYNTAX VrIpxAdjOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpxAdjOperTable." INDEX { vrIndex, vrIpxIndex, vrIpxAdjProtocolPortIdentifierIndex, vrIpxAdjNetworkNumberIndex } ::= { vrIpxAdjOperTable 1 } VrIpxAdjOperEntry ::= SEQUENCE { vrIpxAdjPhysAddress PhysAddress, vrIpxAdjAdjacencyState INTEGER } vrIpxAdjPhysAddress OBJECT-TYPE SYNTAX PhysAddress (SIZE (1..6)) ACCESS read-only STATUS mandatory DESCRIPTION "The physical address of the adjacent router." ::= { vrIpxAdjOperEntry 1 } vrIpxAdjAdjacencyState OBJECT-TYPE SYNTAX INTEGER { initializing(1), up(2), failed(3), down(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The state of the connection to the adjacent router." ::= { vrIpxAdjOperEntry 2 } -- Vr/ Ipx NetSentry -- NetSentry filters, defined in and compiled by NetSentry can be applied -- to IPX packets. IPX packets can be filtered on source and destination -- network and node combinations. vrIpxNs OBJECT IDENTIFIER ::= { vrIpx 7 } vrIpxNsRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpxNsRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpxNs components." ::= { vrIpxNs 1 } vrIpxNsRowStatusEntry OBJECT-TYPE SYNTAX VrIpxNsRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpxNs component." INDEX { vrIndex, vrIpxIndex, vrIpxNsIndex } ::= { vrIpxNsRowStatusTable 1 } VrIpxNsRowStatusEntry ::= SEQUENCE { vrIpxNsRowStatus RowStatus, vrIpxNsComponentName DisplayString, vrIpxNsStorageType StorageType, vrIpxNsIndex NonReplicated } vrIpxNsRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpxNs components. These components can be added and deleted." ::= { vrIpxNsRowStatusEntry 1 } vrIpxNsComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpxNsRowStatusEntry 2 } vrIpxNsStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpxNs tables." ::= { vrIpxNsRowStatusEntry 4 } vrIpxNsIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpxNs tables." ::= { vrIpxNsRowStatusEntry 10 } vrIpxNsProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpxNsProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The provisionable attribute group for the IpxNetSentry component." ::= { vrIpxNs 10 } vrIpxNsProvEntry OBJECT-TYPE SYNTAX VrIpxNsProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpxNsProvTable." INDEX { vrIndex, vrIpxIndex, vrIpxNsIndex } ::= { vrIpxNsProvTable 1 } VrIpxNsProvEntry ::= SEQUENCE { vrIpxNsFirstFilter AsciiString, vrIpxNsLastFilter AsciiString, vrIpxNsLocalInFilter AsciiString, vrIpxNsLocalOutFilter AsciiString } vrIpxNsFirstFilter OBJECT-TYPE SYNTAX AsciiString (SIZE (0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "First NetSentry filter for Ipx. If specified this filter is applied before any other NetSentry filters applicable to the packet." ::= { vrIpxNsProvEntry 1 } vrIpxNsLastFilter OBJECT-TYPE SYNTAX AsciiString (SIZE (0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "Last filter for Ipx. If specified this filter is applied after all other NetSentry filters applicable to the packet." ::= { vrIpxNsProvEntry 2 } vrIpxNsLocalInFilter OBJECT-TYPE SYNTAX AsciiString (SIZE (0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "The filter name of the NetSentry filter to be applied at the Local In filter point." ::= { vrIpxNsProvEntry 3 } vrIpxNsLocalOutFilter OBJECT-TYPE SYNTAX AsciiString (SIZE (0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "The filter name of the NetSentry filter to be applied at the Local Out filter point." ::= { vrIpxNsProvEntry 4 } -- Vr/ Ipx NetSentry NetSentryApplyList -- This component contains a list of NetSentry filters that have been -- applied to IPX packets and information pertaining to each application of -- such NetSentry filters. vrIpxNsNetSentryApp OBJECT IDENTIFIER ::= { vrIpxNs 2 } vrIpxNsNetSentryAppRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpxNsNetSentryAppRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrIpxNsNetSentryApp components." ::= { vrIpxNsNetSentryApp 1 } vrIpxNsNetSentryAppRowStatusEntry OBJECT-TYPE SYNTAX VrIpxNsNetSentryAppRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrIpxNsNetSentryApp component." INDEX { vrIndex, vrIpxIndex, vrIpxNsIndex, vrIpxNsNetSentryAppEntryIndex } ::= { vrIpxNsNetSentryAppRowStatusTable 1 } VrIpxNsNetSentryAppRowStatusEntry ::= SEQUENCE { vrIpxNsNetSentryAppRowStatus RowStatus, vrIpxNsNetSentryAppComponentName DisplayString, vrIpxNsNetSentryAppStorageType StorageType, vrIpxNsNetSentryAppEntryIndex Integer32 } vrIpxNsNetSentryAppRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrIpxNsNetSentryApp components. These components can be added and deleted." ::= { vrIpxNsNetSentryAppRowStatusEntry 1 } vrIpxNsNetSentryAppComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrIpxNsNetSentryAppRowStatusEntry 2 } vrIpxNsNetSentryAppStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrIpxNsNetSentryApp tables." ::= { vrIpxNsNetSentryAppRowStatusEntry 4 } vrIpxNsNetSentryAppEntryIndex OBJECT-TYPE SYNTAX Integer32 (1..268435455) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrIpxNsNetSentryApp tables." ::= { vrIpxNsNetSentryAppRowStatusEntry 10 } vrIpxNsNetSentryAppProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrIpxNsNetSentryAppProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Provisionable group for the IpxNetSentryApplyList." ::= { vrIpxNsNetSentryApp 10 } vrIpxNsNetSentryAppProvEntry OBJECT-TYPE SYNTAX VrIpxNsNetSentryAppProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrIpxNsNetSentryAppProvTable." INDEX { vrIndex, vrIpxIndex, vrIpxNsIndex, vrIpxNsNetSentryAppEntryIndex } ::= { vrIpxNsNetSentryAppProvTable 1 } VrIpxNsNetSentryAppProvEntry ::= SEQUENCE { vrIpxNsNetSentryAppFilter AsciiString, vrIpxNsNetSentryAppNetworkNumber1 AsciiString, vrIpxNsNetSentryAppNode1 AsciiString, vrIpxNsNetSentryAppDirection INTEGER, vrIpxNsNetSentryAppNetworkNumber2 AsciiString, vrIpxNsNetSentryAppNode2 AsciiString } vrIpxNsNetSentryAppFilter OBJECT-TYPE SYNTAX AsciiString (SIZE (0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of the filter to be applied to packets matching the conditions in this entry of the IpxNetSentryApplyList." ::= { vrIpxNsNetSentryAppProvEntry 1 } vrIpxNsNetSentryAppNetworkNumber1 OBJECT-TYPE SYNTAX AsciiString (SIZE (1..11)) ACCESS read-write STATUS mandatory DESCRIPTION "The first IPX network Number used to compare. This network number can be entered either as a dashed hex string or a string of hex digits. (For example a valid network number would be ff-ff-ff-ff or ffffffff). In addition a value of * will be accepted as a wildcard for all networks." ::= { vrIpxNsNetSentryAppProvEntry 2 } vrIpxNsNetSentryAppNode1 OBJECT-TYPE SYNTAX AsciiString (SIZE (1..17)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is the first IPX node address used to compare. This node number can be entered either as a dashed hex string or a string of hex digits. (For example a valid node number would be ff-ff-ff-ff-ff-ff or ffffffffffff). In addition a value of * will be accepted as a wildcard for all nodes." ::= { vrIpxNsNetSentryAppProvEntry 3 } vrIpxNsNetSentryAppDirection OBJECT-TYPE SYNTAX INTEGER { to(1), from(2), tofrom(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates the direction a packet must be moving between the first and second apply list entries in order for the entries to match. First 'to' second, first 'from' second, or first 'tofrom' second (either direction)." ::= { vrIpxNsNetSentryAppProvEntry 4 } vrIpxNsNetSentryAppNetworkNumber2 OBJECT-TYPE SYNTAX AsciiString (SIZE (1..11)) ACCESS read-write STATUS mandatory DESCRIPTION "The second IPX network Number used to compare. This network number can be entered either as a dashed hex string or a string of hex digits. (For example a valid network number would be ff-ff-ff-ff or ffffffff). In addition a value of * will be accepted as a wildcard for all networks." ::= { vrIpxNsNetSentryAppProvEntry 5 } vrIpxNsNetSentryAppNode2 OBJECT-TYPE SYNTAX AsciiString (SIZE (1..17)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is the second IPX node address used to compared. This node can be entered either as a dashed hex string or a string of hex digits. (For example a valid network number would be ff-ff-ff-ff-ff-ff or ffffffffffff). In addition a value of * will be accepted as a wildcard for all nodes." ::= { vrIpxNsNetSentryAppProvEntry 6 } -- -- Version and Compliance statements -- -- Object-Group Statement: -- A list of all current accessible leaf objects. -- OBJECTS { vrIpxSapSFltrStorageType, -- vrPpIpxPNode, -- vrPpIpxPNetSentryPComponentName, -- vrIpxOutRequests, -- vrPpIpxPNetSentryPOutGoingFilter, -- vrPpIpxPRipPInRequests, -- vrIpxInReceives, -- vrIpxServicesCount, -- vrIpxAdjAdjacencyState, -- vrPpIpxPSapPInRequests, -- vrIpxHoldDownInterval, -- vrPpIpxPIWPStorageType, -- vrIpxSapSFltrRowStatus, -- vrIpxFwdNextHopNetworkNumber, -- vrPpIpxPRipPIncorrectPackets, -- vrPpIpxPComponentName, -- vrPpIpxPForwarded, -- vrIpxAdminState, -- vrIpxSnmpOperStatus, -- vrIpxNsNetSentryAppComponentName, -- vrPpIpxPRipPRowStatus, -- vrIpxRipRipAppDirection, -- vrIpxRipRFltrNode, -- vrIpxSrvcSocket, -- vrIpxNsStorageType, -- vrIpxSapSapAppDirection, -- vrIpxNsNetSentryAppFilter, -- vrPpIpxPSapPOutResponses, -- vrIpxRipRipOut, -- vrIpxSapSFltrDisposition, -- vrIpxStorageType, -- vrIpxFwdComponentName, -- vrIpxNoRoutes, -- vrIpxFwdNextHopPhysAddress, -- vrIpxRipRFltrComponentName, -- vrPpIpxPRipPOutPackets, -- vrIpxRipUpdateInterval, -- vrIpxInTooManyHops, -- vrPpIpxPInReceives, -- vrIpxSapSFltrComponentName, -- vrIpxNsRowStatus, -- vrIpxSapStorageType, -- vrIpxMaxHops, -- vrIpxRipMaxDampedSpecificRequests, -- vrIpxRipRowStatus, -- vrPpIpxPIWPComponentName, -- vrPpIpxPType, -- vrIpxSapMaxDampedSpecificRequests, -- vrPpIpxPNetSentryPStorageType, -- vrPpIpxPSnmpOperStatus, -- vrIpxSrvcComponentName, -- vrIpxRowStatus, -- vrIpxSnmpAdminStatus, -- vrIpxSapSapOut, -- vrIpxInBadChecksums, -- vrPpIpxPSapPComponentName, -- vrIpxFwdHopCount, -- vrPpIpxPSapPOutRequests, -- vrPpIpxPSapPInResponses, -- vrIpxSapSFltrNetworkNumber, -- vrIpxOutFiltered, -- vrIpxUsageState, -- vrIpxSapRowStatus, -- vrIpxNsNetSentryAppStorageType, -- vrPpIpxPBroadcastInhibit, -- vrIpxInFiltered, -- vrIpxNsComponentName, -- vrIpxDamping, -- vrIpxOutPackets, -- vrPpIpxPNetSentryPRowStatus, -- vrPpIpxPRipPInPackets, -- vrIpxNsNetSentryAppNetworkNumber2, -- vrIpxSapSapIncorrectPackets, -- vrIpxRipRFltrHops, -- vrIpxInDelivers, -- vrPpIpxPAdminState, -- vrIpxRipComponentName, -- vrIpxSapSapIn, -- vrIpxFwdProtocol, -- vrIpxFwdStorageType, -- vrIpxInHeaderErrors, -- vrIpxSrvcStorageType, -- vrPpIpxPRowStatus, -- vrIpxRipRipIncorrectPackets, -- vrPpIpxPSnmpAdminStatus, -- vrIpxOutDiscards, -- vrPpIpxPNetworkNumberProv, -- vrIpxRipRipAppComponentName, -- vrIpxNsNetSentryAppDirection, -- vrIpxAdjComponentName, -- vrIpxRipRipIn, -- vrIpxNsNetSentryAppNetworkNumber1, -- vrPpIpxPDefaultType, -- vrPpIpxPSapPStorageType, -- vrPpIpxPUsageState, -- vrIpxDestinationCount, -- vrIpxSrvcProtocol, -- vrIpxSapSFltrNode, -- vrIpxRipMaxDampedGeneralRequests, -- vrIpxNsLocalOutFilter, -- vrIpxRipRFltrStorageType, -- vrIpxNetworkNumber, -- vrPpIpxPSapPIncorrectPackets, -- vrIpxSapSFltrName, -- vrIpxSrvcHopCount, -- vrIpxRipRFltrRowStatus, -- vrPpIpxPSapPRowStatus, -- vrPpIpxPRipPOutResponses, -- vrIpxRipRFltrDisposition, -- vrPpIpxPOperationalState, -- vrIpxRipRipAppStorageType, -- vrIpxAdjStorageType, -- vrIpxNsNetSentryAppRowStatus, -- vrIpxMaxPathSplits, -- vrPpIpxPIWPRowStatus, -- vrPpIpxPSourceRouteEndStationSupport, -- vrIpxSapSapAppStorageType, -- vrIpxSrvcRowStatus, -- vrPpIpxPRipPComponentName, -- vrIpxInDiscards, -- vrIpxNsFirstFilter, -- vrIpxControlDelay, -- vrIpxRipRFltrPort, -- vrIpxAdjRowStatus, -- vrIpxRipStorageType, -- vrPpIpxPSapPOutPackets, -- vrIpxSapUpdateInterval, -- vrIpxFwdTicks, -- vrPpIpxPIWPNeighbourRouterName, -- vrPpIpxPStateChanges, -- vrIpxNsNetSentryAppNode2, -- vrIpxAdjPhysAddress, -- vrIpxSapSFltrNumberOfApplyEntries, -- vrPpIpxPNetworkNumber, -- vrIpxFwdRowStatus, -- vrIpxRipRipAppRowStatus, -- vrPpIpxPStorageType, -- vrPpIpxPNetSentryPInComingFilter, -- vrIpxOutMalformedRequests, -- vrIpxRipRFltrTicks, -- vrPpIpxPRipPOutRequests, -- vrIpxInitialGeneralRequests, -- vrIpxNsLocalInFilter, -- vrIpxRipRFltrNumberOfApplyEntries, -- vrPpIpxPEncapsulation, -- vrPpIpxPRipPInResponses, -- vrIpxSapSapAppRowStatus, -- vrIpxRipAgeMultiplier, -- vrIpxProtocolPortCount, -- vrIpxFwdProtocolPortId, -- vrIpxSapSFltrType, -- vrIpxSapMaxDampedGeneralRequests, -- vrIpxComponentName, -- vrIpxNsLastFilter, -- vrIpxForwarded, -- vrPpIpxPIWPInitFails, -- vrIpxRipRFltrNetworkNumber, -- vrIpxUpdateDelay, -- vrIpxNsNetSentryAppNode1, -- vrIpxOperationalState, -- vrPpIpxPSapPInPackets, -- vrIpxInNetBIOS, -- vrIpxInUnknownSocket, -- vrIpxSapComponentName, -- vrIpxSapSapAppComponentName, -- vrPpIpxPIWPNeighbourInternalNetworkNumber, -- vrIpxSapAgeMultiplier, -- vrPpIpxPRipPStorageType } -- STATUS mandatory -- DESCRIPTION -- "A list of all current accessible leaf objects." ipxGroup OBJECT IDENTIFIER ::= { ipxMIB 1 } ipxGroupBE OBJECT IDENTIFIER ::= { ipxGroup 5 } ipxGroupBE01 OBJECT IDENTIFIER ::= { ipxGroupBE 2 } ipxGroupBE01A OBJECT IDENTIFIER ::= { ipxGroupBE01 2 } -- Agent-Capabilities Statement: -- PRODUCT-RELEASE "Passport Release 7.0 Ipx." -- STATUS mandatory -- DESCRIPTION "Ipx MIB: MIB Version BE01A, -- Software Version BG00S4C." -- SUPPORTS Nortel-Magellan-Passport-IpxMIB -- INCLUDES { ipxGroupBE01A } ipxCapabilities OBJECT IDENTIFIER ::= { ipxMIB 3 } ipxCapabilitiesBE OBJECT IDENTIFIER ::= { ipxCapabilities 5 } ipxCapabilitiesBE01 OBJECT IDENTIFIER ::= { ipxCapabilitiesBE 2 } ipxCapabilitiesBE01A OBJECT IDENTIFIER ::= { ipxCapabilitiesBE01 2 } END