io-timeout - io-timeout - 2100_snmp

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a HP device in your network.

io-timeout

io-timeout
1.3.6.1.4.1.11.2.3.9.4.2.1.2.1.1.1

The amount of time, in seconds, to wait for more print job data to be received before an I/O timeout occurs. The I/O channel being timed is the I/O channel that received the data associated with the current print job. If an I/O timeout occurs, the PDL processing sub-system assumes all the data associated with the current print job has been received, and processes the end of job in an PDL specific manner. The POS specifies the supported values. Additional information: If an I/O timeout occurs,the PDL processing sub-system will consider it an end of job condition only if there is data from another I/O subsystem waiting to be processed. The supported values are 5 to 300 seconds. Setting to a value outside the supported range returns status.

Back to 2100_snmp MIB page.

IPHost Network monitor allows you to monitor io-timeout on Hewlett Packard device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco firewalls right now.

MIBs list