rfc1471

rfc1471 Download

MIBs list

With the IPHost SNMP tool, you can monitor any SNMP objects of the rfc1471-ppp-lcp . You can select a variable to monitor using the built-in IPHost MIB browser that provides you with all variables, their current values and descriptions taken from the rfc1471-ppp-lcp .

OID list for rfc1471

pppLinkStatusTable
A table containing PPP-link specific variables for this PPP implementation.
pppLinkStatusEntry
Management information about a particular PPP Link.
pppLinkStatusPhysicalIndex
The value of ifIndex that identifies the lower-level interface over which this PPP Link is operating. This interface would usually be an HDLC or RS-232 type of interface. If there is no lower-layer interface element, or there is no ifEntry for the element ...
pppLinkStatusBadAddresses
The number of packets received with an incorrect Address Field. This counter is a component of the ifInErrors variable that is associated with the interface that represents this PPP Link.
pppLinkStatusBadControls
The number of packets received on this link with an incorrect Control Field. This counter is a component of the ifInErrors variable that is associated with the interface that represents this PPP Link.
pppLinkStatusPacketTooLongs
The number of received packets that have been discarded because their length exceeded the MRU. This counter is a component of the ifInErrors variable that is associated with the interface that represents this PPP Link. NOTE, packets which are longer than ...
pppLinkStatusBadFCSs
The number of received packets that have been discarded due to having an incorrect FCS. This counter is a component of the ifInErrors variable that is associated with the interface that represents this PPP Link.
pppLinkStatusLocalMRU
The current value of the MRU for the local PPP Entity. This value is the MRU that the remote entity is using when sending packets to the local PPP entity. The value of this object is meaningful only when the link has reached the open state (ifOperStatus i ...
pppLinkStatusRemoteMRU
The current value of the MRU for the remote PPP Entity. This value is the MRU that the local entity is using when sending packets to the remote PPP entity. The value of this object is meaningful only when the link has reached the open state (ifOperStatus ...
pppLinkStatusLocalToPeerACCMap
The current value of the ACC Map used for sending packets from the local PPP entity to the remote PPP entity. The value of this object is meaningful only when the link has reached the open state (ifOperStatus is up).
pppLinkStatusPeerToLocalACCMap
The ACC Map used by the remote PPP entity when transmitting packets to the local PPP entity. The value of this object is meaningful only when the link has reached the open state (ifOperStatus is up).
pppLinkStatusLocalToRemoteACCompression
Indicates whether the local PPP entity will use Address and Control Compression when transmitting packets to the remote PPP entity. The value of this object is meaningful only when the link has reached the open state (ifOperStatus is up).
pppLinkStatusRemoteToLocalACCompression
Indicates whether the remote PPP entity will use Address and Control Compression when transmitting packets to the local PPP entity. The value of this object is meaningful only when the link has reached the open state (ifOperStatus is up).
pppLinkStatusTransmitFcsSize
The size of the Frame Check Sequence (FCS) in bits that the local node will generate when sending packets to the remote node. The value of this object is meaningful only when the link has reached the open state (ifOperStatus is up).
pppLinkStatusReceiveFcsSize
The size of the Frame Check Sequence (FCS) in bits that the remote node will generate when sending packets to the local node. The value of this object is meaningful only when the link has reached the open state (ifOperStatus is up).
pppLinkConfigTable
A table containing the LCP configuration parameters for this PPP Link. These variables represent the initial configuration of the PPP Link. The actual values of the parameters may be changed when the link is brought up via the LCP options negotiation mech ...
pppLinkConfigEntry
Configuration information about a particular PPP Link.
pppLinkConfigInitialMRU
The initial Maximum Receive Unit (MRU) that the local PPP entity will advertise to the remote entity. If the value of this variable is 0 then the local PPP entity will not advertise any MRU to the remote entity and the default MRU will be assumed. Changin ...
pppLinkConfigReceiveACCMap
The Asynchronous-Control-Character-Map (ACC) that the local PPP entity requires for use on its receive side. In effect, this is the ACC Map that is required in order to ensure that the local modem will successfully receive all characters. The actual ACC m ...
pppLinkConfigTransmitACCMap
The Asynchronous-Control-Character-Map (ACC) that the local PPP entity requires for use on its transmit side. In effect, this is the ACC Map that is required in order to ensure that all characters can be successfully transmitted through the local modem. ...
pppLinkConfigMagicNumber
If true(2) then the local node will attempt to perform Magic Number negotiation with the remote node. If false(1) then this negotiation is not performed. In any event, the local node will comply with any magic number negotiations attempted by the remote n ...
pppLinkConfigFcsSize
The size of the FCS, in bits, the local node will attempt to negotiate for use with the remote node. Regardless of the value of this object, the local node will comply with any FCS size negotiations initiated by the remote node, per the PPP specification. ...
pppLqrTable
Table containing the LQR parameters and statistics for the local PPP entity.
pppLqrEntry
LQR information for a particular PPP link. A PPP link will have an entry in this table if and only if LQR Quality Monitoring has been successfully negotiated for said link.
pppLqrQuality
The current quality of the link as declared by the local PPP entity's Link-Quality Management modules. No effort is made to define good or bad, nor the policy used to determine it. The not-determined value indicates that the entity does not actually evalu ...
pppLqrInGoodOctets
The LQR InGoodOctets counter for this link.
pppLqrLocalPeriod
The LQR reporting period, in hundredths of a second that is in effect for the local PPP entity.
pppLqrRemotePeriod
The LQR reporting period, in hundredths of a second, that is in effect for the remote PPP entity.
pppLqrOutLQRs
The value of the OutLQRs counter on the local node for the link identified by ifIndex.
pppLqrInLQRs
The value of the InLQRs counter on the local node for the link identified by ifIndex.
pppLqrConfigTable
Table containing the LQR Configuration parameters for the local PPP entity.
pppLqrConfigEntry
LQR configuration information for a particular PPP link.
pppLqrConfigPeriod
The LQR Reporting Period that the local PPP entity will attempt to negotiate with the remote entity, in units of hundredths of a second. Changing this object will have effect when the link is next restarted.
pppLqrConfigStatus
If enabled(2) then the local node will attempt to perform LQR negotiation with the remote node. If disabled(1) then this negotiation is not performed. In any event, the local node will comply with any magic number negotiations attempted by the remote node ...
pppLqrExtnsTable
Table containing additional LQR information for the local PPP entity.
pppLqrExtnsEntry
Extended LQR information for a particular PPP link. Assuming that this group has been implemented, a PPP link will have an entry in this table if and only if LQR Quality Monitoring has been successfully negotiated for said link.
pppLqrExtnsLastReceivedLqrPacket
This object contains the most recently received LQR packet. The format of the packet is as described in the LQM Protocol specificiation. All fields of the packet, including the `save' fields, are stored in this object. The LQR packet is stored in network ...

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now. Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access. The IPHost's SNMP monitor can communicate and interact with any SNMP-enabled device.

MIBs list