rfc1659

rfc1659 Download

MIBs list

With the IPHost SNMP tool, you can monitor any SNMP objects of the rfc1659-rs-232-mib . You can select a variable to monitor using the built-in IPHost MIB browser that provides you with all variables, their current values and descriptions taken from the rfc1659-rs-232-mib .

OID list for rfc1659

rs232Number
The number of ports (regardless of their current state) in the RS-232-like general port table.
rs232PortTable
A list of port entries. The number of entries is given by the value of rs232Number.
rs232PortEntry
Status and parameter values for a port.
rs232PortIndex
The value of ifIndex for the port. By convention and if possible, hardware port numbers map directly to external connectors. The value for each port must remain constant at least from one re-initialization of the network management agent to the next.
rs232PortType
The port's hardware type.
rs232PortInSigNumber
The number of input signals for the port in the input signal table (rs232PortInSigTable). The table contains entries only for those signals the software can detect and that are useful to observe.
rs232PortOutSigNumber
The number of output signals for the port in the output signal table (rs232PortOutSigTable). The table contains entries only for those signals the software can assert and that are useful to observe.
rs232PortInSpeed
The port's input speed in bits per second. Note that non-standard values, such as 9612, are probably not allowed on most implementations.
rs232PortOutSpeed
The port's output speed in bits per second. Note that non-standard values, such as 9612, are probably not allowed on most implementations.
rs232PortInFlowType
The port's type of input flow control. 'none' indicates no flow control at this level. 'ctsRts' and 'dsrDtr' indicate use of the indicated hardware signals.
rs232PortOutFlowType
The port's type of output flow control. 'none' indicates no flow control at this level. 'ctsRts' and 'dsrDtr' indicate use of the indicated hardware signals.
rs232AsyncPortTable
A list of asynchronous port entries. Entries need not exist for synchronous ports.
rs232AsyncPortEntry
Status and parameter values for an asynchronous port.
rs232AsyncPortIndex
A unique value for each port. Its value is the same as rs232PortIndex for the port.
rs232AsyncPortBits
The port's number of bits in a character.
rs232AsyncPortStopBits
The port's number of stop bits.
rs232AsyncPortParity
The port's sense of a character parity bit.
rs232AsyncPortAutobaud
A control for the port's ability to automatically sense input speed. When rs232PortAutoBaud is 'enabled', a port may autobaud to values different from the set values for speed, parity, and character size. As a result a network management system may tempo ...
rs232AsyncPortParityErrs
Total number of characters with a parity error, input from the port since system re-initialization and while the port state was 'up' or 'test'.
rs232AsyncPortFramingErrs
Total number of characters with a framing error, input from the port since system re-initialization and while the port state was 'up' or 'test'.
rs232AsyncPortOverrunErrs
Total number of characters with an overrun error, input from the port since system re-initialization and while the port state was 'up' or 'test'.
rs232SyncPortTable
A list of asynchronous port entries. Entries need not exist for synchronous ports.
rs232SyncPortEntry
Status and parameter values for a synchronous port.
rs232SyncPortIndex
A unique value for each port. Its value is the same as rs232PortIndex for the port.
rs232SyncPortClockSource
Source of the port's bit rate clock. 'split' means the tranmit clock is internal and the receive clock is external.
rs232SyncPortFrameCheckErrs
Total number of frames with an invalid frame check sequence, input from the port since system re-initialization and while the port state was 'up' or 'test'.
rs232SyncPortTransmitUnderrunErrs
Total number of frames that failed to be transmitted on the port since system re-initialization and while the port state was 'up' or 'test' because data was not available to the transmitter in time.
rs232SyncPortReceiveOverrunErrs
Total number of frames that failed to be received on the port since system re-initialization and while the port state was 'up' or 'test' because the receiver did not accept the data in time.
rs232SyncPortInterruptedFrames
Total number of frames that failed to be received or transmitted on the port due to loss of modem signals since system re-initialization and while the port state was 'up' or 'test'.
rs232SyncPortAbortedFrames
Number of frames aborted on the port due to receiving an abort sequence since system re-initialization and while the port state was 'up' or 'test'.
rs232SyncPortRole
The role the device is playing that is using this port. dte means the device is performing the role of data terminal equipment dce means the device is performing the role of data circuit-terminating equipment.
rs232SyncPortEncoding
The bit stream encoding technique that is in effect for this port. nrz for Non-Return to Zero encoding nrzi for Non-Return to Zero Inverted encoding.
rs232SyncPortRTSControl
The method used to control the Request To Send (RTS) signal. controlled when the DTE is asserts RTS each time data needs to be transmitted and drops RTS at some point after data transmission begins. If rs232SyncPortRole is 'dte', the RTS is an output sig ...
rs232SyncPortRTSCTSDelay
The interval (in milliseconds) that the DCE must wait after it sees RTS asserted before asserting CTS. This object exists in support of older synchronous devices that cannot recognize CTS within a certain interval after it asserts RTS.
rs232SyncPortMode
The mode of operation of the port with respect to the direction and simultaneity of data transfer. fdx when frames on the data link can be transmitted and received at the same time hdx when frames can either be received from the ...
rs232SyncPortIdlePattern
The bit pattern used to indicate an idle line.
rs232SyncPortMinFlags
The minimum number of flag patterns this port needs in order to recognize the end of one frame and the start of the next. Plausible values are 1 and 2.
rs232InSigTable
A list of port input control signal entries implemented and visible to the software on the port, and useful to monitor.
rs232InSigEntry
Input control signal status for a hardware port.
rs232InSigPortIndex
The value of rs232PortIndex for the port to which this entry belongs.
rs232InSigName
Identification of a hardware signal, as follows: rts Request to Send cts Clear to Send dsr Data Set Ready dtr Data Terminal Ready ri Ring Indicator dcd Received Line Signal Detector sq Signal Quality Detector srs Data Signaling R ...
rs232InSigState
The current signal state.
rs232InSigChanges
The number of times the signal has changed from 'on' to 'off' or from 'off' to 'on'.
rs232OutSigTable
A list of port output control signal entries implemented and visible to the software on the port, and useful to monitor.
rs232OutSigEntry
Output control signal status for a hardware port.
rs232OutSigPortIndex
The value of rs232PortIndex for the port to which this entry belongs.
rs232OutSigName
Identification of a hardware signal, as follows: rts Request to Send cts Clear to Send dsr Data Set Ready dtr Data Terminal Ready ri Ring Indicator dcd Received Line Signal Detector sq Signal Quality Detector srs Data Signaling R ...
rs232OutSigState
The current signal state.
rs232OutSigChanges
The number of times the signal has changed from 'on' to 'off' or from 'off' to 'on'.
rs232Group
A collection of objects providing information applicable to all RS-232-like interfaces.
rs232AsyncGroup
A collection of objects providing information applicable to asynchronous RS-232-like interfaces.
rs232SyncGroup
A collection of objects providing information applicable to synchronous RS-232-like interfaces.
rs232SyncSDLCGroup
A collection of objects providing information applicable to synchronous RS-232-like interfaces running SDLC.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now. Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access. The IPHost's SNMP monitor can communicate and interact with any SNMP-enabled device.

MIBs list