rfc1695 Download

atmNoTrafficDescriptor

This identifies the no ATM traffic descriptor type. Parameters 1, 2, 3, 4, and 5 are not used. This traffic descriptor type can be used for best effort traffic.

atmNoClpNoScr

This traffic descriptor is for no CLP and no Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: CLP=0+1 peak cell rate in cells per second Parameter 2: not used Parameter 3: not used Parameter 4: not used Parameter 5: not us ...

atmClpNoTaggingNoScr

This traffic descriptor is for no CLP without tagging and no Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: CLP=0+1 peak cell rate in cells per second Parameter 2: CLP=0 peak cell rate in cells per second Parameter 3: no ...

atmClpTaggingNoScr

This traffic descriptor is for CLP with tagging and no Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: CLP=0+1 peak cell rate in cells per second Parameter 2: CLP=0 peak cell rate in cells per second with excess traffic t ...

atmNoClpScr

This traffic descriptor is for no CLP with Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: CLP=0+1 peak cell rate in cells per second Parameter 2: CLP=0+1 sustained cell rate in cells per second Parameter 3: CLP=0+1 maxim ...

atmClpNoTaggingScr

This traffic descriptor is for CLP with Sustained Cell Rate and no tagging. The use of the parameter vector for this type: Parameter 1: CLP=0+1 peak cell rate in cells per second Parameter 2: CLP=0 sustained cell rate in cells per second Parameter 3: CLP= ...

atmClpTaggingScr

This traffic descriptor is for CLP with tagging and Sustained Cell Rate. The use of the parameter vector for this type: Parameter 1: CLP=0+1 peak cell rate in cells per second Parameter 2: CLP=0 sustained cell rate in cells per second with excess traffic ...

atmInterfaceConfTable

This table contains ATM local interface configuration parameters, one entry per ATM interface port.

atmInterfaceConfEntry

This list contains ATM interface configuration parameters and state variables.

atmInterfaceMaxVpcs

The maximum number of VPCs (PVCs and SVCs) supported at this ATM interface. At the ATM UNI, the maximum number of VPCs (PVCs and SVCs) ranges from 0 to 256 only.

atmInterfaceMaxVccs

The maximum number of VCCs (PVCs and SVCs) supported at this ATM interface.

atmInterfaceConfVpcs

The number of VPCs (PVCs and SVCs) configured for use at this ATM interface. At the ATM UNI, the configured number of VPCs (PVCs and SVCs) can range from 0 to 256 only.

atmInterfaceConfVccs

The number of VCCs (PVCs and SVCs) configured for use at the ATM interface.

atmInterfaceMaxActiveVpiBits

The maximum number of active VPI bits configured for use at the ATM interface. At the ATM UNI, the maximum number of active VPI bits configured for use ranges from 0 to 8 only.

atmInterfaceMaxActiveVciBits

The maximum number of active VCI bits configured for use at this ATM interface.

atmInterfaceIlmiVpi

The VPI value of the VCC supporting the ILMI at this ATM interface. If the values of atmInterfaceIlmiVpi and atmInterfaceIlmiVci are both equal to zero then the ILMI is not supported at this ATM interface.

atmInterfaceIlmiVci

The VCI value of the VCC supporting the ILMI at this ATM interface. If the values of atmInterfaceIlmiVpi and atmInterfaceIlmiVci are both equal to zero then the ILMI is not supported at this ATM interface.

atmInterfaceAddressType

The type of primary ATM address configured for use at this ATM interface.

atmInterfaceAdminAddress

An address assigned for administrative purposes, for example, an address associated with the service provider side of a public network UNI. If this interface has no assigned administrative address, or when the address used for administrative purposes is ...

atmInterfaceMyNeighborIpAddress

The IP address of the neighbor system connected to the far end of this interface, to which a Network Management Station can send SNMP messages, as IP datagrams sent to UDP port 161, in order to access network management information concerning the operati ...

atmInterfaceMyNeighborIfName

The textual name of the interface on the neighbor system on the far end of this interface, and to which this interface connects. If the neighbor system is manageable through SNMP and supports the object ifName, the value of this object must be identical ...

atmInterfaceDs3PlcpTable

This table contains ATM interface DS3 PLCP parameters and state variables, one entry per ATM interface port.

atmInterfaceDs3PlcpEntry

This list contains DS3 PLCP parameters and state variables at the ATM interface.

atmInterfaceDs3PlcpSEFSs

The number of DS3 PLCP Severely Errored Framing Second (SEFS). Each SEFS represents a one-second interval which contains one or more SEF event.

atmInterfaceDs3PlcpAlarmState

This variable indicates if there is an alarm present for the DS3 PLCP. The value receivedFarEndAlarm means that the DS3 PLCP has received an incoming Yellow Signal, the value incomingLOF means that the DS3 PLCP has declared a loss of frame (LOF) failure ...

atmInterfaceDs3PlcpUASs

The counter associated with the number of Unavailable Seconds encountered by the PLCP.

atmInterfaceTCTable

This table contains ATM interface TC Sublayer parameters and state variables, one entry per ATM interface port.

atmInterfaceTCEntry

This list contains TC Sublayer parameters and state variables at the ATM interface.

atmInterfaceOCDEvents

The number of times the Out of Cell Delineation (OCD) events occur. If seven consecutive ATM cells have Header Error Control (HEC) violations, an OCD event occurs. A high number of OCD events may indicate a problem with the TC Sublayer.

atmInterfaceTCAlarmState

This variable indicates if there is an alarm present for the TC Sublayer. The value lcdFailure indicates that a Loss of Cell Delineation (LCD) failure state has been declared for the TC Sublayer. Transition from failure to the no alarm state occurs when ...

atmTrafficDescrParamTable

This table contains information on ATM traffic descriptor type and the associated parameters.

atmTrafficDescrParamEntry

This list contains ATM traffic descriptor type and the associated parameters.

atmTrafficDescrParamIndex

This object is used by the virtual link table (i.e., VPL or VCL table) to identify the row of this table.

atmTrafficDescrType

The value of this object identifies the type of ATM traffic descriptor. The type may indicate no traffic descriptor or traffic descriptor with one or more parameters. These parameters are specified as a parameter vector, in the corresponding instances of ...

atmTrafficDescrParam1

The first parameter of the ATM traffic descriptor used according to the value of atmTrafficDescrType.

atmTrafficDescrParam2

The second parameter of the ATM traffic descriptor used according to the value of atmTrafficDescrType.

atmTrafficDescrParam3

The third parameter of the ATM traffic descriptor used according to the value of atmTrafficDescrType.

atmTrafficDescrParam4

The fourth parameter of the ATM traffic descriptor used according to the value of atmTrafficDescrType.

atmTrafficDescrParam5

The fifth parameter of the ATM traffic descriptor used according to the value of atmTrafficDescrType.

atmTrafficQoSClass

The value of this object identifies the QoS Class. Four Service classes have been specified in the ATM Forum UNI Specification: Service Class A: Constant bit rate video and Circuit emulation Service Class B: Variable bit rate video/audio Service Class C: ...

atmTrafficDescrRowStatus

This object is used to create a new row or modify or delete an existing row in this table.

atmVplTable

The Virtual Path Link (VPL) table. A bi-directional VPL is modeled as one entry in this table.

atmVplEntry

An entry in the VPL table. This entry is used to model a bi-directional VPL. To create a VPL at an ATM interface, either of the following procedures are used: Negotiated VPL establishment (1) The management application creates a VPL entry in the atmVplTa ...

atmVplVpi

The VPI value of the VPL. Note that the VPI=0 is not used for a VPL not associated with a VCL. The maximum VPI value cannot exceed the value allowable by the atmInterfaceMaxVpiBits.

atmVplAdminStatus

This object is implemented only for a VPL which terminates a VPC (i.e., one which is NOT cross-connected to other VPLs). Its value specifies the desired administrative state of the VPL. The up and down states indicate that the traffic flow is enabled and ...

atmVplOperStatus

This object indicates the current operational status of the VPL. The up and down states indicate that the VPL is currently operational, or not operational, respectively. The unknown state indicates that the status of this VPL cannot be determined.

atmVplLastChange

The value of MIB II's sysUpTime object at the time this VPL entered its current operational state. If the current state was entered prior to the last re-initialization of the agent, then this object contains a zero value.

atmVplReceiveTrafficDescrIndex

The value of this object identifies the row in the atmTrafficDescrParamTable which applies to the receive direction of the VPL.

atmVplTransmitTrafficDescrIndex

The value of this object identifies the row in the atmTrafficDescrParamTable which applies to the transmit direction of the VPL.

atmVplCrossConnectIdentifier

This object is implemented only for a VPL which is cross-connected to other VPLs that belong to the same VPC. All such associated VPLs have the same value of this object, and all their cross-connections are identified by entries in the atmVpCrossConnectT ...

atmVplRowStatus

This object is used to create, delete or modify a row in this table. To create a new VCL, this object is initially set to 'createAndWait' or 'createAndGo'. This object must not be set to 'active' unless the following columnar objects exist in this row: a ...

atmVclTable

The Virtual Channel Link (VCL) table. A bi-directional VCL is modeled as one entry in this table.

atmVclEntry

An entry in the VCL table. This entry is used to model a bi-directional VCL. To create a VCL at an ATM interface, either of the following procedures are used: Negotiated VCL establishment (1) The management application creates a VCL entry in the atmVclTa ...

atmVclVpi

The VPI value of the VCL. The maximum VPI value cannot exceed the value allowable by the atmInterfaceMaxVpiBits.

atmVclVci

The VCI value of the VCL. The maximum VCI value cannot exceed the value allowable by the atmInterfaceMaxVciBits.

atmVclAdminStatus

This object is implemented only for a VCL which terminates a VCC (i.e., one which is NOT cross-connected to other VCLs). Its value specifies the desired administrative state of the VCL. The up and down states indicate that the traffic flow is enabled and ...

atmVclOperStatus

This object indicates the current operational status of the VCL. The up and down states indicate that the VCL is currently operational, or not operational, respectively. The unknown state indicates that the status of this VCL cannot be determined.

atmVclLastChange

The value of MIB II's sysUpTime object at the time this VCL entered its current operational state. If the current state was entered prior to the last re-initialization of the agent, then this object contains a zero value.

atmVclReceiveTrafficDescrIndex

The value of this object identifies the row in the ATM Traffic Descriptor Table which applies to the receive direction of this VCL.

atmVclTransmitTrafficDescrIndex

The value of this object identifies the row of the ATM Traffic Descriptor Table which applies to the transmit direction of this VCL.

atmVccAalType

An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL is in use. The type of AAL used on this VCC. The AAL type includes AAL1, AAL3/4, and AAL5. The other(4) may be user-defined AAL type. The unknown type ...

atmVccAal5CpcsTransmitSduSize

An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 is in use. The maximum AAL5 CPCS SDU size in octets that is supported on the transmit direction of this VCC.

atmVccAal5CpcsReceiveSduSize

An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 is in use. The maximum AAL5 CPCS SDU size in octets that is supported on the receive direction of this VCC.

atmVccAal5EncapsType

An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 is in use. The type of data encapsulation used over the AAL5 SSCS layer. The definitions reference RFC 1483 Multiprotocol Encapsulation over ATM AAL5 a ...

atmVclCrossConnectIdentifier

This object is implemented only for a VCL which is cross-connected to other VCLs that belong to the same VCC. All such associated VCLs have the same value of this object, and all their cross-connections are identified by entries in the atmVcCrossConnectT ...

atmVclRowStatus

This object is used to create, delete or modify a row in this table. To create a new VCL, this object is initially set to 'createAndWait' or 'createAndGo'. This object must not be set to 'active' unless the following columnar objects exist in this row: a ...

atmVpCrossConnectIndexNext

This object contains an appropriate value to be used for atmVpCrossConnectIndex when creating entries in the atmVpCrossConnectTable. The value 0 indicates that no unassigned entries are available. To obtain the atmVpCrossConnectIndex value for a new entr ...

atmVpCrossConnectTable

The ATM VP Cross Connect table. A bi- directional VP cross-connect which cross-connects two VPLs is modeled as one entry in this table.

atmVpCrossConnectEntry

An entry in the ATM VP Cross Connect table. This entry is used to model a bi-directional ATM VP cross-connect which cross-connects two VPLs. Step-wise Procedures to set up a VP Cross-connect Once the entries in the atmVplTable are created, the following p ...

atmVpCrossConnectIndex

A unique value to identify this VP cross-connect.

atmVpCrossConnectLowIfIndex

The value of this object is equal to MIB II's ifIndex value of the ATM interface port for this VP cross-connect. The term low implies that this ATM interface has the numerically lower ifIndex value than the other ATM interface identified in the same atmV ...

atmVpCrossConnectLowVpi

The value of this object is equal to the VPI value at the ATM interface associated with the VP cross-connect that is identified by atmVpCrossConnectLowIfIndex. The VPI value cannot exceed the number supported by the atmInterfaceMaxVpiBits at the low ATM i ...

atmVpCrossConnectHighIfIndex

The value of this object is equal to MIB II's ifIndex value of the ATM interface port for this VP cross-connect. The term high implies that this ATM interface has the numerically higher ifIndex value than the other ATM interface identified in the same at ...

atmVpCrossConnectHighVpi

The value of this object is equal to the VPI value at the ATM interface associated with the VP cross-connect that is identified by atmVpCrossConnectHighIfIndex. The VPI value cannot exceed the number supported by the atmInterfaceMaxVpiBits at the high ATM ...

atmVpCrossConnectAdminStatus

The value of this object identifies the desired administrative status of this bi-directional VP cross-connect. The up and down states indicate that the traffic flow is enabled and disabled respectively on this VP cross-connect.

atmVpCrossConnectL2HOperStatus

The value of this object identifies the current operational status of the VP cross-connect in one direction; (i.e., from the low to high direction). The up and down states indicate that this ATM VP cross-connect from low to high direction is operational ...

atmVpCrossConnectH2LOperStatus

The value of this object identifies the current operational status of the VP cross-connect in one direction; (i.e., from the high to low direction). The up and down states indicate that this ATM VP cross-connect from high to low direction is operational ...

atmVpCrossConnectL2HLastChange

The value of MIB II's sysUpTime object at the time this VP cross-connect entered its current operational state in the low to high direction. If the current state was entered prior to the last re-initialization of the agent, then this object contains a ze ...

atmVpCrossConnectH2LLastChange

The value of MIB II's sysUpTime object at the time this VP cross-connect entered its current operational state in the high to low direction. If the current state was entered prior to the last re-initialization of the agent, then this object contains a zer ...

atmVpCrossConnectRowStatus

The status of this entry in the atmVpCrossConnectTable. This object is used to create a cross-connect for cross-connecting VPLs which are created using the atmVplTable or to change or delete an existing cross-connect. This object must be initially set to ...

atmVcCrossConnectIndexNext

This object contains an appropriate value to be used for atmVcCrossConnectIndex when creating entries in the atmVcCrossConnectTable. The value 0 indicates that no unassigned entries are available. To obtain the atmVpCrossConnectIndex value for a new entr ...

atmVcCrossConnectTable

The ATM VC Cross Connect table. A bi- directional VC cross-connect which cross-connects two end points (i.e., VCLs) is modeled as one entry in this table.

atmVcCrossConnectEntry

An entry in the ATM VC Cross Connect table. This entry is used to model a bi-directional ATM VC cross-connect cross-connecting two end points. Step-wise Procedures to set up a VC Cross-connect Once the entries in the atmVclTable are created, the following ...

atmVcCrossConnectIndex

A unique value to identify this VC cross-connect.

atmVcCrossConnectLowIfIndex

The value of this object is equal to MIB II's ifIndex value of the ATM interface port for this VC cross-connect. The term low implies that this ATM interface has the numerically lower ifIndex value than the other ATM interface identified in the same atmV ...

atmVcCrossConnectLowVpi

The value of this object is equal to the VPI value at the ATM interface associated with the VC cross-connect that is identified by atmVcCrossConnectLowIfIndex. The VPI value cannot exceed the number supported by the atmInterfaceMaxVpiBits at the low ATM i ...

atmVcCrossConnectLowVci

The value of this object is equal to the VCI value at the ATM interface associated with this VC cross-connect that is identified by atmVcCrossConnectLowIfIndex. The VCI value cannot exceed the number supported by the atmInterfaceMaxVciBits at the low ATM ...

atmVcCrossConnectHighIfIndex

The value of this object is equal to MIB II's ifIndex value for the ATM interface port for this VC cross-connect. The term high implies that this VC cross-connect that this ATM interface has the numerically higher ifIndex value than the other ATM interfa ...

atmVcCrossConnectHighVpi

The value of this object is equal to the VPI value at the ATM interface associated with the VC cross-connect that is identified by atmVcCrossConnectHighIfIndex. The VPI value cannot exceed the number supported by the atmInterfaceMaxVpiBits at the high ATM ...

atmVcCrossConnectHighVci

The value of this object is equal to the VCI value at the ATM interface associated with the VC cross-connect that is identified by atmVcCrossConnectHighIfIndex. The VCI value cannot exceed the number supported by the atmInterfaceMaxVciBits at the high ATM ...

atmVcCrossConnectAdminStatus

The value of this object identifies the desired administrative status of this bi-directional VC cross-connect. The up and down states indicate that the traffic flow is enabled or disabled respectively on this VC cross-connect.

atmVcCrossConnectL2HOperStatus

The value of this object identifies the current operational status of the VC cross-connect in one direction; (i.e., from the low to high direction). The up and down states indicate that this ATM VC cross-connect from low to high direction is operational ...

atmVcCrossConnectH2LOperStatus

The value of this object identifies the current operational status of the VC cross-connect in one direction; (i.e., from the high to low direction). The up and down states indicate that this ATM VC cross-connect from high to low direction is operational ...

atmVcCrossConnectL2HLastChange

The value of MIB II's sysUpTime object at the time this VC cross-connect entered its current operational state in low to high direction. If the current state was entered prior to the last re-initialization of the agent, then this object contains a zero v ...

atmVcCrossConnectH2LLastChange

The value of MIB II's sysUpTime object at the time this VC cross-connect entered its current operational state in high to low direction. If the current state was entered prior to the last re-initialization of the agent, then this object contains a zero v ...

atmVcCrossConnectRowStatus

The status of this entry in the atmVcCrossConnectTable. This object is used to create a new cross-connect for cross-connecting VCLs which are created using the atmVclTable or to change or delete existing cross-connect. This object must be initially set t ...

aal5VccTable

This table contains AAL5 VCC performance parameters.

aal5VccEntry

This list contains the AAL5 VCC performance parameters.

aal5VccVpi

The VPI value of the AAL5 VCC at the interface identified by the ifIndex.

aal5VccVci

The VCI value of the AAL5 VCC at the interface identified by the ifIndex.

aal5VccCrcErrors

The number of AAL5 CPCS PDUs received with CRC-32 errors on this AAL5 VCC at the interface associated with an AAL5 entity.

aal5VccSarTimeOuts

The number of partially re-assembled AAL5 CPCS PDUs which were discarded on this AAL5 VCC at the interface associated with an AAL5 entity because they were not fully re-assembled within the required time period. If the re-assembly timer is not supported, ...

aal5VccOverSizedSDUs

The number of AAL5 CPCS PDUs discarded on this AAL5 VCC at the interface associated with an AAL5 entity because the AAL5 SDUs were too large.

atmInterfaceConfGroup

A collection of objects providing configuration information about an ATM interface.

atmTrafficDescrGroup

A collection of objects providing information about ATM traffic descriptor type and the associated parameters.

atmInterfaceDs3PlcpGroup

A collection of objects providing information about DS3 PLCP layer at an ATM interface.

atmInterfaceTCGroup

A collection of objects providing information about TC sublayer at an ATM interface.

atmVpcTerminationGroup

A collection of objects providing information about a VPL at an ATM interface which terminates a VPC (i.e., one which is NOT cross-connected to other VPLs).

atmVccTerminationGroup

A collection of objects providing information about a VCL at an ATM interface which terminates a VCC (i.e., one which is NOT cross-connected to other VCLs).

atmVpCrossConnectGroup

A collection of objects providing information about a VP cross-connect and the associated VPLs that are cross-connected together.

atmVcCrossConnectGroup

A collection of objects providing information about a VC cross-connect and the associated VCLs that are cross-connected together.

aal5VccGroup

A collection of objects providing AAL5 configuration and performance statistics of a VCC.