ATM-RMON-MIB Download

portSelGrpTable

Controls the setup of port and ATM connection selection criteria used on behalf of any collection associated with entries in this table (e.g., atmHostTable). This table allows portSelTable entries with the same value of the portSelCollectGroup object to b ...

portSelGrpEntry

A conceptual row in the portSelGrpTable. An example of the indexing of this entry is portSelGrpCreateTime.7 .

portSelGrpIndex

An arbitrary and unique index for this portSelGrpEntry. If portSelGrpTable entries are recreated by the agent after a restart, then the portSelGrpIndex value must be retained across a restart as well.

portSelGrpDescr

An administratively-assigned descriptive label for this portSelGrp entry.

portSelGrpCreateTime

The value of sysUpTime when this portSelGrp entry was activated. This can be used by the management station to ensure that the table has not been deleted and recreated between polls.

portSelGrpOwner

The entity that configured this entry and is therefore using the resources assigned to it.

portSelGrpStatus

The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. No objects are required to be written prior to the row being set to active(1). However, all portSelTable entries which are to b ...

portSelTable

Controls the setup of selection criteria for a single ATM port, used on behalf of any collections identified with the associated portSelectGroup (identified by its portSelGrpIndex value). This table identifies the collection characteristics for the ATM po ...

portSelEntry

A conceptual row in the portSelTable. Entries may only be created on behalf of ATM interfaces. That is, the ifType value associated with each ifIndex value must be equal to atm(37) or atmLogicalPort(80). An example of the indexing of this entry is portSel ...

portSelCollectGroup

This object identifies the associated instance of portSelGrpIndex, which indicates the portSelectGroup to which this port is assigned. This object may not be modified if the associated instance of portSelStatus is equal to active(1).

portSelCreateTime

The value of sysUpTime when this entry was activated. This can be used by the management station to ensure that the table has not been deleted and recreated between polls.

portSelOwner

The entity that configured this entry and is therefore using the resources assigned to it.

portSelStatus

The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Specifically, an appropriate value for the portSelCollectGroup object must be set before this object may be set to active(1). An ...

atmStatsControlTable

A list of ATM basic statistic collection table control entries. These entries will enable the collection of statistical totals for an entire portSelectGroup.

atmStatsControlEntry

A conceptual row in the atmStatsControlTable. Entries in this table are identified and indexed by the portSelGrpIndex object. At most one atmStats collection is done per portSelectGroup. An example of the indexing of this entry is atmStatsDropEvents.1 .

atmStatsControlDropEvents

The total number of events in which cells which should have been counted in the associated atmStatsEntry, but were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of cells or calls dropped; it is just th ...

atmStatsControlOwner

The entity that configured this entry and is therefore using the resources assigned to it.

atmStatsControlStatus

The status of this atmStatsControlEntry. This control entry may be created and destroyed independently of the associated portSelGrpEntry, however its associated atmStatsTable can exist only when the portSelGrpEntry controlling this collection is active. I ...

atmStatsTable

A collection of statistical totals for all ATM addresses that have been discovered on behalf of the portSelectGroup associated with this entry.

atmStatsEntry

A conceptual row in the atmStatsTable. The portSelGrpIndex value in the index identifies the portSelectGroup on whose behalf this entry was created. An example of the indexing of this entry is atmStatsCells.8.1

atmStatsSClass

The quality of service classification for this entry. See the ServiceClass textual convention for details and specific class-of-service values.

atmStatsCreateTime

The value of sysUpTime when this entry was created. This can be used by the management station to ensure that the entry has not been deleted and recreated between polls.

atmStatsCells

The total number of error-free cells detected on all ATM connections on behalf of this portSelectGroup collection. Note that a particular cell may only cause this counter to increment once, even if multiple criteria is met for inclusion in this portSelect ...

atmStatsCellsRollovers

The number of times that the associated instance of the atmStatsCells object has transitioned from the value 2^^32-1 to zero.

atmStatsHCCells

The high capacity version of the atmStatsCells object.

atmStatsNumCallAttempts

The number of call attempts detected on all signalled ATM connections on behalf of this portSelectGroup collection. A probe should increment this counter each time a connection setup attempt (identified with this portSelectGroup) is detected. For point-t ...

atmStatsNumCalls

The number of successfully established calls detected on all signalled ATM connections on behalf of this portSelectGroup collection. Note that this value includes successfully established calls that are currently in progress. A probe should increment th ...

atmStatsConnTime

The elapsed time of all calls identified by the associated instance of the atmStatsNumCallAttempts object. Note that point-to-multipoint calls are counted only once, regardless of the number of leafs participating in the call.

atmHostControlTable

A list of ATM host table control entries. These entries will enable the collection of ATM host information in the atmHostTable. Entries in the atmHostTable will be created on behalf of each entry in this table. A probe is required to support at most one a ...

atmHostControlEntry

A conceptual row in the atmHostControlTable. Entries in this table are identified and indexed by the portSelGrpIndex object. At most one atmHost collection is done per portSelectGroup. An example of the indexing of this entry is atmHostControlInserts.1

atmHostControlInserts

The number of times an atmHost entry has been inserted into the atmHost table. If an entry is inserted, then deleted, and then inserted, this counter will be incremented by 2. To allow for efficient implementation strategies, agents may delay updating th ...

atmHostControlDeletes

The number of times an atmHost entry has been deleted from the atmHost table (for any reason). If an entry is deleted, then inserted, and then deleted, this counter will be incremented by 2. To allow for efficient implementation strategies, agents may de ...

atmHostControlMaxDesiredEntries

The maximum number of entries that are desired in the atmHostTable on behalf of this control entry. The probe will not create more than this number of associated entries in the table, but may choose to create fewer entries in this table for any reason inc ...

atmHostControlPriority

The priority this collection should be given to retain resources, in the event the probe must reclaim some resources in order to add new entries to an existing atmHost collection or add new collections of other types. If the associated instance of atmHost ...

atmHostControlAddrCollectScope

This object controls the granularity of address collection in atmHostTable entries created on behalf of this control entry, according to the rules specified by the AddressCollectScope textual convention. If the associated instance of atmHostControlStatus ...

atmHostControlDropEvents

The total number of events in which cells which should have been counted in the associated atmHostEntry, but were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of cells or calls dropped; it is just the ...

atmHostControlOwner

The entity that configured this entry and is therefore using the resources assigned to it.

atmHostControlStatus

The status of this atmHostControlEntry. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Specifically, appropriate values for the associated instances of atmHostControlMaxDesiredEntries, atmHostControlP ...

atmHostTable

A collection of statistics for a particular ATM host address that has been discovered on behalf of the portSelectGroup associated with this entry. The probe will add to this table all addresses seen as the source or destination address in all calls, on al ...

atmHostEntry

A conceptual row in the atmHostTable. The portSelGrpIndex value in the index identifies the portSelectGroup on whose behalf this entry was created. An example of the indexing of this entry is atmHostInCells.4.20..2

atmHostAddress

The ATM address for this atmHostEntry. This is represented as an octet string with specific semantics and length as identified by the AtmAddr textual convention. Note that only 20 octet 'AtmAddr' addresses are collected in this table.

atmHostSClass

The quality of service classification for this entry. See the ServiceClass textual convention for details and specific class-of-service values.

atmHostCreateTime

The value of sysUpTime when this entry was activated. This can be used by the management station to ensure that the entry has not been deleted and recreated between polls.

atmHostInCells

The number of error-free cells detected on ATM connections associated with this portSelectGroup, in which this ATM address was identified as the receiver address, or one of the leaf addresses on a point-to-multipoint ATM connection.

atmHostInCellsRollovers

The number of times that the associated instance of the atmHostInCells object has transitioned from the value 2^^32-1 to zero.

atmHostInHCCells

The high capacity version of the atmHostInCells object.

atmHostOutCells

The number of error-free cells detected on ATM connections associated with this portSelectGroup, in which this ATM address was identified as the sender address.

atmHostOutCellsRollovers

The number of times that the associated instance of the atmHostOutCells object has transitioned from the value 2^^32-1 to zero.

atmHostOutHCCells

The high capacity version of the atmHostOutCells object.

atmHostInNumCallAttempts

The number of calls detected on ATM connections associated with this entry, in which the associated endpoint address was identified as the Called Party in an signalled ATM connection establishment attempt. Note that this value includes calls that are curr ...

atmHostInNumCalls

The number of successfully established calls detected on ATM connections associated with this entry, in which the associated endpoint address was identified as the Called Party address. Note that this value includes calls that are currently in progress. ...

atmHostOutNumCallAttempts

The number of calls detected on ATM connections associated with this entry, in which the associated endpoint address was identified as the Calling Party in an signalled ATM connection establishment attempt. Note that this value includes calls that are cur ...

atmHostOutNumCalls

The number of successfully established calls detected on ATM connections associated with this entry, in which the associated endpoint address was identified as the Calling Party address. Note that this value includes calls that are currently in progress. ...

atmHostInConnTime

The elapsed time of all calls identified by the associated instance of atmHostInNumCallAttempts.

atmHostOutConnTime

The elapsed time of all calls identified by the associated instance of atmHostOutNumCallAttempts.

atmMatrixControlTable

A list of ATM matrix table control entries. These entries will enable the collection of ATM matrix information in the atmMatrixSDTable and atmMatrixDSTable. A probe is required to support at most one atmMatrix collection per instance of an associated port ...

atmMatrixControlEntry

A conceptual row in the atmMatrixControlTable. An example of the indexing of this entry is atmMatrixControlInserts.1

atmMatrixControlInserts

The number of times an atmMatrix entry has been inserted into the atmMatrix table. If an entry is inserted, then deleted, and then inserted, this counter will be incremented by 2. The addition of a conversation into both the atmMatrixSDTable and atmMatr ...

atmMatrixControlDeletes

The number of times an atmMatrix entry has been deleted from the atmMatrix table (for any reason). If an entry is deleted, then inserted, and then deleted, this counter will be incremented by 2. The deletion of a conversation from both the atmMatrixSDTa ...

atmMatrixControlMaxDesiredEntries

The maximum number of entries that are desired in the atmMatrixTable on behalf of this control entry. The probe will not create more than this number of associated entries in the table, but may choose to create fewer entries in this table for any reason i ...

atmMatrixControlPriority

The priority this collection should be given to retain resources, in the event the probe must reclaim some resources in order to add new entries to an existing atmMatrix collection or add new collections of other types. If the associated instance of atmMa ...

atmMatrixControlAddrCollectScope

This object controls the granularity of address collection in atmMatrixSDTable and atmMatrixDSTable entries created on behalf of this control entry, according to the rules specified by the AddressCollectScope textual convention. If the associated instance ...

atmMatrixControlDropEvents

The total number of events in which cells which should have been counted in the associated atmMatrixSDEntry and atmMatrixDSEntry, but were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of cells or call ...

atmMatrixControlOwner

The entity that configured this entry and is therefore using the resources assigned to it.

atmMatrixControlStatus

The status of this atmMatrixControlEntry. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Specifically, the associated instances of atmMatrixControlMaxDesiredEntries, atmMatrixControlPriority, and atmM ...

atmMatrixSDTable

A collection of statistics for conversations between particular ATM endpoint addresses that have been discovered on behalf of the portSelectGroup associated with this entry. The probe will add a new entry to this table for all conversations (connections) ...

atmMatrixSDEntry

A conceptual row in the atmMatrixSDTable. The portSelGrpIndex value in the index identifies the portSelectGroup on whose behalf this entry was created. An example of the indexing of this entry is atmMatrixSDCells.1.20..20..2

atmMatrixSDSrcAddress

The transmitting endpoint ATM address for this atmMatrixSDEntry. This is represented as an octet string with specific semantics and length as identified by the AtmAddr textual convention. Note that only 20 octet 'AtmAddr' addresses are collected in this t ...

atmMatrixSDDstAddress

The destination endpoint ATM address for this atmMatrixSDEntry. This is represented as an octet string with specific semantics and length as identified by the AtmAddr textual convention. Note that only 20 octet 'AtmAddr' addresses are collected in this ta ...

atmMatrixSDSClass

The quality of service classification for this entry. See the ServiceClass textual convention for details and specific class-of-service values.

atmMatrixSDCreateTime

The value of sysUpTime when this entry was activated. This can be used by the management station to ensure that the entry has not been deleted and recreated between polls.

atmMatrixSDCells

The number of error-free cells detected on connections in which these ATM addresses were identified as the transmitting and receiving endpoint addresses. Note that for point-to-multipoint connections, an entry is created for each root-to-leaf address-pair ...

atmMatrixSDCellsRollovers

The number of times that the associated instance of the atmMatrixSDCells object has transitioned from the value 2^^32-1 to zero.

atmMatrixSDHCCells

The high capacity version of the atmMatrixSDCells object.

atmMatrixSDNumCallAttempts

The number of SVC call setup attempts detected on ATM connections within the specified portSelectGroup, in which the indicated atmMatrixSDSrcAddress endpoint address was identified as the Calling Party and the indicated atmMatrixSDDstAddress was identifie ...

atmMatrixSDNumCalls

The number of successful SVC call setups detected on ATM connections within the specified portSelectGroup, in which the indicated atmMatrixSDSrcAddress endpoint address was identified as the Calling Party and the indicated atmMatrixSDDstAddress was identi ...

atmMatrixSDConnTime

The elapsed time of all calls identified by the associated instance of atmMatrixSDNumCallAttempts.

atmMatrixDSTable

A collection of statistics for conversations between particular ATM endpoint addresses that have been discovered on behalf of the portSelectGroup associated with this entry. The probe will add a new entry to this table for all conversations (connections) ...

atmMatrixDSEntry

A conceptual row in the atmMatrixDSTable. The portSelGrpIndex value in the index identifies the portSelectGroup on whose behalf this entry was created. An example of the indexing of this entry is atmMatrixDSCells.1.20..20..2

atmMatrixDSSrcAddress

The transmitting endpoint ATM address for this atmMatrixDSEntry. This is represented as an octet string with specific semantics and length as identified by the AtmAddr textual convention. Note that only 20 octet 'AtmAddr' addresses are collected in this t ...

atmMatrixDSDstAddress

The destination endpoint ATM address for this atmMatrixDSEntry. This is represented as an octet string with specific semantics and length as identified by the AtmAddr textual convention. Note that only 20 octet 'AtmAddr' addresses are collected in this ta ...

atmMatrixDSSClass

The quality of service classification for this entry. See the ServiceClass textual convention for details and specific class-of-service values.

atmMatrixDSCreateTime

The value of sysUpTime when this entry was activated. This can be used by the management station to ensure that the entry has not been deleted and recreated between polls.

atmMatrixDSCells

The number of error-free cells detected on ATM connections in which these ATM addresses were identified as the transmitting and receiving endpoint addresses. Note that for point-to-multipoint connections, an entry is created for each root-to-leaf address- ...

atmMatrixDSCellsRollovers

The number of times that the associated instance of the atmMatrixDSCells object has transitioned from the value 2^^32-1 to zero.

atmMatrixDSHCCells

The high capacity version of the atmMatrixDSCells object.

atmMatrixDSNumCallAttempts

The number of SVC call setup attempts detected on ATM connections within the specified portSelectGroup, in which the indicated atmMatrixDSSrcAddress endpoint address was identified as the Calling Party and the indicated atmMatrixDSDstAddress was identifie ...

atmMatrixDSNumCalls

The number of successful SVC call setups detected on ATM connections within the specified portSelectGroup, in which the indicated atmMatrixDSSrcAddress endpoint address was identified as the Calling Party and the indicated atmMatrixDSDstAddress was identi ...

atmMatrixDSConnTime

The elapsed time of all calls identified by the associated instance of atmMatrixDSNumCallAttempts.

atmMatrixTopNControlTable

A set of parameters that control the creation of a report of the top N matrix entries according to a selected metric.

atmMatrixTopNControlEntry

A conceptual row in the atmMatrixTopNControlTable. An example of the indexing of this table is atmMatrixTopNControlDuration.3.1

atmMatrixTopNControlIndex

An index that is used to uniquely identify an entry in the atmMatrixTopNControlTable. Each such entry defines one top N report prepared on behalf of one atmMatrix entry, which must exist before this entry may be created.

atmMatrixTopNControlRateBase

The variable for each atmMatrix entry that the atmMatrixTopNEntries are sorted by. This object may not be modified if the associated atmMatrixTopNControlStatus object is equal to active(1).

atmMatrixTopNControlSClass

The service class for which this topN control entry is collecting information in associated atmMatrixTopN reports. This object may not be modified if the associated atmMatrixTopNControlStatus object is equal to active(1).

atmMatrixTopNControlTimeRemaining

The number of seconds left in the report currently being collected. When this object is modified by the management station, a new collection is started, possibly aborting a currently running report. The new value is used as the requested duration of thi ...

atmMatrixTopNControlGeneratedReports

The number of reports that have been generated by this entry.

atmMatrixTopNControlDuration

The number of seconds that this report has collected during the last sampling interval. When the associated atmMatrixTopNControlTimeRemaining object is set, this object shall be set by the probe to the same value and shall not be modified until the next t ...

atmMatrixTopNControlRequestedSize

The maximum number of host entries requested for this report. When this object is created or modified, the probe should set atmMatrixTopNControlGrantedSize as closely to this object as is possible for the particular probe implementation and available reso ...

atmMatrixTopNControlGrantedSize

The maximum number of host entries in this report. When the associated atmMatrixTopNControlRequestedSize object is created or modified, the probe should set this object as closely to the requested value as is possible for the particular implementation and ...

atmMatrixTopNControlStartTime

The value of sysUpTime when this top N report was last started. In other words, this is the time that the associated atmMatrixTopNControlTimeRemaining object was modified to start the requested report or the time the report was last automatically (re)sta ...

atmMatrixTopNControlOwner

The entity that configured this entry and is therefore using the resources assigned to it.

atmMatrixTopNControlStatus

The status of this atmMatrixTopNControlEntry. An entry may not exist in the active state unless all objects in the entry have an appropriate value. If this object is not equal to active(1), all associated entries in the atmMatrixTopNTable shall be deleted ...

atmMatrixTopNTable

A set of statistics for those matrix entries that have counted the highest number of cells, calls, or connection time.

atmMatrixTopNEntry

A conceptual row in the atmMatrixTopNTable. The atmMatrixTopNControlIndex value in the index identifies the atmMatrixTopNControlEntry on whose behalf this entry was created. An example of the indexing of this table is atmMatrixTopNSrcAddress.1.3.10

atmMatrixTopNIndex

An index that uniquely identifies an entry in the atmMatrixTopNTable among those in the same report. This index is between 1 and N, where N is the number of entries in this report. Each conversation in the selected atmMatrixSDTable, for the report interv ...

atmMatrixTopNSrcAddress

The ATM endpoint address identified as the source of the traffic measured in this report. Note that only 20 octet 'AtmAddr' addresses are collected in this table.

atmMatrixTopNDstAddress

The ATM endpoint address identified as the destination of the traffic measured in this report. Note that only 20 octet 'AtmAddr' addresses are collected in this table.

atmMatrixTopNRate

The value of the ranked metric for this conversation, for this report. If the associated value of atmMatrixTopNRateBase is equal to atmMatrixTopNCells(1), then this object is assigned the delta value of the atmMatrixSDCells object during this report inter ...

atmMatrixTopNReverseRate

The value of the associated metric for this conversation, and for this report, but for the reverse direction. For example, if the associated value of atmMatrixTopNRateBase is equal to atmMatrixTopNCells(1), then this object contains the atmMatrixSDCells d ...

atmRmonDataCollectMode

Controls the internal data collection for the entire ATM-RMON agent. If this object has a value of 'active(1)', then data tables will be created and maintained (normal behavior). If this object has a value of 'inactive(2)' then ATM-RMON monitoring will no ...

portSelectGroup

Selects the ATM connections that should be monitored as part of a specific collection-group.

atmStatsGroup

Counts the basic statistics for collections on behalf of particular portSelectGroup collections.

atmStatsHCGroup

Counts the high capacity basic statistics for collections on behalf of particular portSelectGroup collections. The atmStatsGroup must be implemented if the atmStatsHCGroup is implemented. This group is mandatory for implementations which support high cap ...

atmHostGroup

Counts the amount of traffic sent from and to each ATM address discovered by the probe, on behalf of particular portSelectGroup collections.

atmHostHCGroup

Counts the amount of traffic sent from and to each ATM address discovered by the probe, on behalf of particular portSelectGroup collections, using high-capacity counters. The atmHostGroup must be implemented if the atmHostHCGroup is implemented. This gro ...

atmMatrixGroup

Counts the amount of traffic sent between each pair of ATM addresses discovered by the probe, on behalf of particular portSelectGroup collections.

atmMatrixHCGroup

Counts the amount of traffic sent between each pair of ATM addresses discovered by the probe, on behalf of particular portSelectGroup collections, using high capacity counters. The atmMatrixGroup must be implemented if the atmMatrixHCGroup is implemented. ...

atmConfigGroup

Configuration extentions used to control internal agent behavior.