CISCO-CABLE-METERING-MIB Download

ccmtrCollectionType

Current method of export for metering data. The enumerations are: none(1) : Metering collection has not been enabled. local(2) : Store the collected metering records locally on the CMTS. stream(3) : Stream the metering records to an external collect ...

ccmtrCollectionFilesystem

The filesystem where metering records are to be stored. This object makes sense only if ccmtrCollectionType object is local which indicates that the metering records are to be stored in the local filesystem. When ccmtrCollectionType is 'stream' this objec ...

ccmtrCollectionTable

This table is used only if ccmtrCollectionType object is stream which indicates that the metering records are to be streamed to an external collection server. It contains IP address information of the collection server. In addition it contains other conf ...

ccmtrCollectionEntry

A set of IP attributes of the mediation or collection server and configuration parameters for streaming the metering records. An entry in this table exists for each configured mediation or collection server.

ccmtrCollectionID

Identification of a IP address and port number associated with the mediation or collection server. The ccmtrCollectionID is used in determining the order of the IP address, port number to which the streaming will take place. The primary represents the fir ...

ccmtrCollectionIpAddrType

The type of internet address of ccmtrCollectionIpAddress.

ccmtrCollectionIpAddress

The IP address of the collection server. It will be of type as referred by ccmtrCollectionIpAddrType. The ccmtrCollectionPort should be also valid along with ccmtrCollectionIpAddress for a row to be created. The primary collection server IP address repres ...

ccmtrCollectionPort

The port number of the collection server. This port number chosen should not be any of the well defined ports. The ccmtrCollectionIpAddress should be also valid along with ccmtrCollectionPort for a row to be created. The primary collection server port rep ...

ccmtrCollectionRowStatus

Controls and reflects the status of rows in this table. It can use used for creation, modifying and deleting entries in this table. The ccmtrCollectionPort should also be valid along with ccmtrCollectionIpAddress for a row to be created. The ccmtrCollecti ...

ccmtrCollectionInterval

The interval in which the metering information is collected. This object makes sense only if ccmtrCollectionType object is stream which indicates that the metering records are to be streamed to an external collection server. This object is deprecated and ...

ccmtrCollectionRetries

The number of retries to stream the metering records to the external collection server before an error is flagged. This object makes sense only if ccmtrCollectionType object is stream which indicates that the metering records are to be streamed to an exte ...

ccmtrCollectionSecure

An indication of whether the streaming to the collection server should be secure or not. The value of true indicates that the streaming will be secure and false indicates non-secure. However the secure option is available only if the image on the CMTS all ...

ccmtrCollectionCpeList

An indication if one would like the metering records to contain the CPE(Customer premises equipment) IP addresses. This option is provided to improve performance. By default, this object is true which means the CPE information will always be present.

ccmtrCollectionAggregate

An indication if one would like only aggregate Service Flow information per Cable Modem to be recorded. In this case the record will have a SFID of 0 and a blank Service Class Name. The distinction between upstream and downstream will however be maintaine ...

ccmtrCollectionSrcIfIndex

The ifIndex of the interface which will be used as the source interface for the billing packets. When ccmtrCollectionType is 'local', the IP address of this source interface will be used as the CMTS IP address in the billing packets. When ccmtrCollectionT ...

ccmtrCollectionRevInterval

The interval at which the metering information is collected. This object is of significance only if ccmtrCollectionType object is 'stream' which indicates that the metering records are to be streamed to an external collection server.

ccmtrCollectionDataPerSession

This object specifies the number of service flow data that would be collected at a Cable linecard in one session. ccmtrCollectionDataPerSession together with ccmtrCollectionDataTimer aims to control as well as throttle the rate of export of the service fl ...

ccmtrCollectionDataTimer

This object specifies the time interval before the start of the next session of service flow data collection at a Cable linecard. After collection of ccmtrCollectionDataPerSession service flow data at a Cable linecard, the linecard would resume collection ...

ccmtrCollectionStatus

The status of the last metering data export. It indicates the success or failure of writing the metering record file or streaming the record to the collection server.

ccmtrCollectionDestination

It represents the name of the file that is created to store the metering record or the IP address and port number to which the metering information was streamed in both the success and failure scenerios. In the case of local storage it is the filename gen ...

ccmtrCollectionTimestamp

The time when the last metering record was exported successfully or with some failure.

ccmtrMeteringNotifEnable

An indication of whether the notifications associated with metering are enabled or disabled. true indicates the notification is enabled and false indicates the notification is disabled.

ccmtrMeteringObjGroup

Group of objects implemented in CMTS providing for usage based metering configuration and notification information. This group is deprecated by ccmtrMeteringObjGroupRev1.

ccmtrMeteringNotifCtrlGroup

The notification control which a CISCO-CABLE-METERING-MIB is required to implement.

ccmtrMeteringObjGroupRev1

Group of objects implemented in CMTS providing for usage based metering configuration and notification information.

ccmtrMeteringSrcIntfObjGroup

Group of objects implemented in CMTS to define the source interface for the billing packets.

ccmtrMeteringRateCtrlObjGroup

Group of objects implemented in CMTS to control as well as throttle the rate of export of the service flow data.