CISCO-DOT11-QOS-MIB Download
This MIB module provides network management
support for QoS on wireless LAN devices. The
objects defined in this MIB provide equivalent
support as the objects in the IEEE 802.11E
Standard draft. The original names of the objects
in the standard are included in the REFERENCE
clauses.
IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for CISCO-DOT11-QOS-MIB
- cdot11QosConfigTable
- This table contains the basic set of attributes to configure QoS queues for radio interfaces of a wireless LAN device. This table has an expansion dependent relationship with the ifTable. Each IEEE 802.11 wireless interface has different outbound queues ...
- cdot11QosConfigEntry
- Each entry contains parameters to configure traffic contention window, AIFS, priority and MSDU lifetime for each traffic queue on an IEEE 802.11 interface.
- cdot11TrafficQueue
- This is the index to the outbound traffic queue on the radio interface.
- cdot11TrafficClass
- This object specifies the traffic class and priority for the traffic on this queue.
- cdot11QosCWmin
- This object defines the minimum contention window value for a traffic class. The minimum contention window is 2 to the power of cdot11QosCWmin minus 1, and that is from 0 to 1023. The cdot11QosCWmin value must be less than or equal to cdot11QosCWmax.
- cdot11QosCWmax
- This object defines the maximum contention window value for a traffic class. The maximum contention window is 2 to the power of cdot11QosCWmax minus 1, and that is from 0 to 1023. The cdot11QosCWmax value must be greater than or equal to cdot11QosCWmin.
- cdot11QosBackoffOffset
- This specifies the offset of the radio backoff from the transmission media for this traffic class. The backoff interval of a radio is calculated from a pseudo random integer drawn from a uniform distribution over the interval determined by the maximum an ...
- cdot11QosMaxRetry
- This specifies the number of times the radio retries for a particular transmission if there is a collision for the media.
- cdot11QosSupportTable
- This table contains the attributes indicating QoS support information on the IEEE 802.11 interfaces of this device. This table has a sparse dependent relationship with the ifTable. For each entry in this table, there exists an entry in the ifTable of ifT ...
- cdot11QosSupportEntry
- Each entry contains attributes to indicate if QoS and priority queue are supported for an IEEE 802.11 interface.
- cdot11QosOptionImplemented
- This object indicates if QoS is implemented on this IEEE 802.11 network interface.
- cdot11QosOptionEnabled
- This object indicates if QoS is enabled on this IEEE 802.11 network interface. If it is 'true', QoS queuing is ON and traffic are prioritized according to their traffic class. If it is 'false', there is no QoS queuing and traffic are not prioritized.
- cdot11QosQueuesAvailable
- This object shows the number of QoS priority queues are available on this IEEE 802.11 network interface. That is the number of queue per interface in the cdot11QosConfigTable.
- cdot11QosQueueTable
- This table contains the queue weight and size information and statistics for each traffic queue on each the IEEE 802.11 interface. This table has a sparse dependent relationship with the ifTable. For each entry in this table, there exists an entry in th ...
- cdot11QosQueueEntry
- Each entry contains the current queue weight, size, and peak size information for each traffic queue on an IEEE 802.11 interface.
- cdot11QosQueueQuota
- This is the current QoS priority queue packet quota for this queue on the overall bandwidth. The total available quota is platform dependent and is shared among all the transmitting queues. The queue with the largest quota value has the largest share of ...
- cdot11QosQueueSize
- This is the current QoS priority queue size for this queue.
- cdot11QosQueuePeakSize
- This is the peak QoS priority queue size for this queue.
- cdot11QosStatisticsTable
- This table contains the QoS statistics by traffic queue on each the IEEE 802.11 network interface. This table has a expansion dependent relationship with the ifTable. For each entry in this table, there exists an entry in the ifTable of ifType ieee80211( ...
- cdot11QosStatisticsEntry
- Each entry contain QoS statistics for data transmission and receive for each traffic queue on an IEEE 802.11 interface.
- cdot11QosDiscardedFrames
- This is the counter for QoS discarded frames transmitting from this IEEE 802.11 interface for the traffic queue.
- cdot11QosFails
- This is the counter for QoS failures on this IEEE 802.11 interface for the traffic queue.
- cdot11QosRetries
- This is the counter for QoS retries performed on this IEEE 802.11 interface for the traffic queue.
- cdot11QosMutipleRetries
- This is the counter for QoS multiple retries performed on this IEEE 802.11 interface for the traffic queue.
- cdot11QosTransmittedFrames
- This is the counter for QoS frames transmitted from this IEEE 802.11 interface for the traffic queue.
- cdot11QosIfStatisticsTable
- This table contains the attributes indicating QoS statistics on the IEEE 802.11 interfaces of the device. This table has a sparse dependent relationship with the ifTable. For each entry in this table, there exists an entry in the ifTable of ifType ieee8 ...
- cdot11QosIfStatisticsEntry
- Each entry contains attributes to support QoS statistics on an IEEE 802.11 interface.
- cdot11QosIfDiscardedFragments
- This object counts the number of QoS discarded transmitting fragments on this radio interface.
- cdot11QosIfVlanTable
- This table maps VLANs to different traffic classes and defines their QoS properties. This table has an expansion dependent relationship with the ifTable. For each entry in this table, there exists an entry in the ifTable of ifType ieee80211(71).
- cdot11QosIfVlanEntry
- Each entry defines parameters determining the traffic class and QoS configuration of a VLAN.
- cdot11QosIfVlanId
- This object identifies the VLAN (1 to 4095) on this radio interface.
- cdot11QosIfVlanTrafficClass
- This is the QoS traffic class for the traffic transmitting on this VLAN. The traffic class determines the priority for the VLAN.
- cdot11QosNotifEnabled
- Indicates whether cdot11QosChangeNotif notification will or will not be sent by the agent when the QoS configuration in the cdot11QosConfigTable is changed.
- ciscoDot11QosConfigGroup
- Configurations for IEEE 802.11 QoS.
- ciscoDot11QosStatsGroup
- Status and statistics for IEEE 802.11 QoS.
- ciscoDot11QosNotifControlGroup
- Notification control configuration for QoS.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.