CISCO-IETF-MPLS-TE-P2MP-STD-MIB Download

cmplsTeP2mpTunnelConfigured

The number of P2MP tunnels configured on this device. A tunnel is considered configured if the mplsTunnelRowStatus in MPLS-TE-STD-MIB is active(1).

cmplsTeP2mpTunnelActive

The number of P2MP tunnels active on this device. A tunnel is considered active if the mplsTunnelOperStatus in MPLS-TE-STD-MIB is up(1).

cmplsTeP2mpTunnelTotalMaxHops

The maximum number of hops that can be specified for an entire P2MP tunnel on this device. This object should be used in conjunction with mplsTunnelMaxHops in MPLS-TE-STD-MIB that is used in the context of P2MP tunnels to express the maximum number of hop ...

cmplsTeP2mpTunnelTable

The cmplsTeP2mpTunnelTable allows new P2MP MPLS tunnels to be created between an LSR and one or more remote end-points, and existing P2MP tunnels to be reconfigured or removed. This table sparse augments mplsTunnelTable in MPLS-TE-STD-MIB such that entrie ...

cmplsTeP2mpTunnelEntry

An entry in this table represents a P2MP MPLS tunnel. An entry can be created by a network administrator or by an SNMP agent as instructed by an MPLS signaling protocol. An entry in this table MUST correspond to an entry in the mplsTunnelTable in MPLS-TE- ...

cmplsTeP2mpTunnelP2mpIntegrity

Denotes whether or not P2MP Integrity is required for this tunnel. If P2MP integrity is operational on a P2MP tunnel then the failure of the path to any of the tunnel destinations should cause the teardown of the entire P2MP tunnel.

cmplsTeP2mpTunnelBranchRole

This value supplements the value in the object mplsTunnelRole in MPLS-TE-STD-MIB that indicates the role of this LSR in the tunnel represented by this entry in cmplsTeP2mpTunnelTable. mplsTunnelRole may take any of the values: head(1), transit(2), tail(3) ...

cmplsTeP2mpTunnelP2mpXcIndex

This object contains the value of mplsXCIndex, the primary index of the mplsXCTable for all cross-connect entries for this P2MP LSP. If no XC entries have been created yet, this object must return zero. The set of entries in the mplsXCTable for this P2MP ...

cmplsTeP2mpTunnelRowStatus

This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified by the agent except cmplsTeP2mpTunnelRowStatus and cmplsTeP2mpTunnelStorageType. This objec ...

cmplsTeP2mpTunnelStorageType

The storage type for this tunnel entry. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.

cmplsTeP2mpTunnelSubGroupIDNext

This object contains an unused value for cmplsTeP2mpTunnelDestSubGroupID, or a zero to indicate that none exists. Negative values are not allowed, as they do not correspond to valid values of cmplsTeP2mpTunnelDestSubGroupID. Note that this object offers a ...

cmplsTeP2mpTunnelDestTable

The cmplsTeP2mpTunnelDestTable allows new destinations of P2MP MPLS tunnels to be added to and removed from P2MP tunnels.

cmplsTeP2mpTunnelDestEntry

An entry in this table represents a destination of a P2MP MPLS tunnel. An entry can be created by a network administrator or by an SNMP agent as instructed by an MPLS signaling protocol. Entries in this table share some index fields with the cmplsTeP2mpTu ...

cmplsTeP2mpTunnelDestSrcSubGroupOriginType

This object identifies the type of address carried in cmplsTeP2mpTunnelDestSrcSubGroupOrigin. Since the object cmplsTeP2mpTunnelDestSrcSubGroupOrigin must conform to the protocol specification, this object must return either ipv4(1) or ipv6(2) at a transi ...

cmplsTeP2mpTunnelDestSrcSubGroupOrigin

The TE Router ID (reachable and stable IP address) of the originator of the P2MP sub-group as received on a Path message by a transit or egress LSR. This object is interpreted in the context of cmplsTeP2mpTunnelDestSrcSubGroupOriginType. The value of the ...

cmplsTeP2mpTunnelDestSrcSubGroupID

The unique identifier assigned by the sub-group originator for this sub-group of this P2MP tunnel as received on a Path message by a transit or egress LSR. The value of the sub-group identifier used on outgoing Path messages is found in cmplsTeP2mpTunnelD ...

cmplsTeP2mpTunnelDestSubGroupOriginType

This object identifies the type of address carried in cmplsTeP2mpTunnelDestSubGroupOrigin. This object must return either ipv4(1) or ipv6(2) in keeping with the protocol specification.

cmplsTeP2mpTunnelDestSubGroupOrigin

The TE Router ID (reachable and stable IP address) of the originator of the P2MP sub-group. In many cases, this will be the ingress LSR of the P2MP tunnel and will be the received signaled value as available in cmplsTeP2mpTunnelDestSrcSubGroupOrigin. When ...

cmplsTeP2mpTunnelDestSubGroupID

The unique identifier assigned by the sub-group originator for this sub-group of this P2MP tunnel. An appropriate value for this object during row creation when the sub-group origin in cmplsTeP2mpTunnelDestSubGroupOrigin is the local LSR can be obtained b ...

cmplsTeP2mpTunnelDestDestinationType

This object identifies the type of address carried in cmplsTeP2mpTunnelDestDestination. This object forms part of the index of this table and can, therefore, not return the value unknown(0). Similarly, since the object cmplsTeP2mpTunnelDestDestination mus ...

cmplsTeP2mpTunnelDestDestination

A single destination of this P2MP tunnel. That is, a routable TE address of a leaf. This will often be the TE Router ID of the leaf, but can be any interface address. When a signaling protocol is used, this object corresponds to the S2L Sub-LSP destinatio ...

cmplsTeP2mpTunnelDestBranchOutSegment

This object identifies the outgoing branch from this LSR towards the destination represented by this table entry. It must be a unique identifier within the scope of this tunnel. If MPLS-LSR-STD-MIB is implemented, this object should contain an index into ...

cmplsTeP2mpTunnelDestHopTableIndex

Index into the mplsTunnelHopTable entry that specifies the explicit route hops for this destination of the P2MP tunnel. This object represents the configured route for the branch of the P2MP tree to this destination and is meaningful only at the head-end ...

cmplsTeP2mpTunnelDestPathInUse

This value denotes the configured path that was chosen as the explicit path to this destination of this P2MP tunnel. This value reflects the secondary index into mplsTunnelHopTable where the primary index comes from cmplsTeP2mpTunnelDestHopTableIndex. The ...

cmplsTeP2mpTunnelDestCHopTableIndex

Index into the mplsTunnelCHopTable that identifies the explicit path for this destination of the P2MP tunnel. This path is based on the chosen configured path identified by cmplsTeP2mpTunnelDestHopTableIndex and cmplsTeP2mpTunnelDestPathInUse, but may hav ...

cmplsTeP2mpTunnelDestARHopTableIndex

Index into the mplsTunnelARHopTable that identifies the actual hops traversed to this destination of the P2MP tunnel. This is automatically updated by the agent when the actual hops becomes available. If this destination is the destination of the 'first S ...

cmplsTeP2mpTunnelDestTotalUpTime

This value represents the aggregate up time for all instances of this tunnel to this destination, if this information is available. If this information is not available, this object MUST return a value of 0.

cmplsTeP2mpTunnelDestInstanceUpTime

This value identifies the total time that the currently active tunnel instance to this destination has had its operational status (mplsTeP2mpTunnelDestOperStatus) set to up(1) since it was last previously not up(1).

cmplsTeP2mpTunnelDestPathChanges

This object counts the number of times the actual path for this destination of this P2MP tunnel instance has changed. This object should be read in conjunction with cmplsTeP2mpTunnelDestDiscontinuityTime.

cmplsTeP2mpTunnelDestLastPathChange

Specifies the time since the last change to the actual path for this destination of this P2MP tunnel instance.

cmplsTeP2mpTunnelDestCreationTime

Specifies the value of sysUpTime when the first instance of this tunnel came into existence for this destination. That is, when the value of cmplsTeP2mpTunnelDestOperStatus was first set to up(1).

cmplsTeP2mpTunnelDestStateTransitions

This object counts the number of times the status (mplsTeP2mpTunnelDestOperStatus) of this tunnel instance to this destination has changed. This object should be read in conjunction with cmplsTeP2mpTunnelDestDiscontinuityTime.

cmplsTeP2mpTunnelDestDiscontinuityTime

The value of sysUpTime on the most recent occasion at which any one or more of this row's Counter32 objects experienced a discontinuity. If no such discontinuity has occurred since the last re-initialization of the local management subsystem, then this ob ...

cmplsTeP2mpTunnelDestAdminStatus

Indicates the desired operational status of this destination of this P2MP tunnel.

cmplsTeP2mpTunnelDestOperStatus

Indicates the actual operational status of this destination of this P2MP tunnel. This object may be compared to mplsTunnelOperStatus that includes two other values: dormant(5) -- some component is missing notPresent(6) -- down due to the state of -- lo ...

cmplsTeP2mpTunnelDestRowStatus

This object is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified by SET operations except cmplsTeP2mpTunnelDestAdminStatus and cmplsTeP2mpTunnelDestStorageType ...

cmplsTeP2mpTunnelDestStorageType

The storage type for this table entry. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.

cmplsTeP2mpTunnelBranchPerfTable

This table provides per-tunnel branch MPLS performance information. This table is not valid for switching types other than packet.

cmplsTeP2mpTunnelBranchPerfEntry

An entry in this table is created by the LSR for each downstream branch (out-segment) from this LSR for this P2MP tunnel. More than one destination as represented by an entry in the cmplsTeP2mpTunnelDestTable may be reached through a single out-segment. M ...

cmplsTeP2mpTunnelBranchPerfBranch

This object identifies an outgoing branch from this LSR for this tunnel. Its value is unique within the context of the tunnel. If MPLS-LSR-STD-MIB is implemented, this object should contain an index into mplsOutSegmentTable. Under all circumstances, this ...

cmplsTeP2mpTunnelBranchPerfPackets

Number of packets forwarded by the tunnel onto this branch. This object should represents the 32-bit value of the least significant part of the 64-bit value if both cmplsTeP2mpTunnelBranchPerfHCPackets is returned. This object should be read in conjunctio ...

cmplsTeP2mpTunnelBranchPerfHCPackets

High capacity counter for number of packets forwarded by the tunnel onto this branch. This object should be read in conjunction with cmplsTeP2mpTunnelBranchDiscontinuityTime.

cmplsTeP2mpTunnelBranchPerfErrors

Number of packets dropped because of errors or for other reasons, that were supposed to be forwarded onto this branch for this tunnel. This object should be read in conjunction with cmplsTeP2mpTunnelBranchDiscontinuityTime.

cmplsTeP2mpTunnelBranchPerfBytes

Number of bytes forwarded by the tunnel onto this branch. This object should represents the 32-bit value of the least significant part of the 64-bit value if both cmplsTeP2mpTunnelBranchPerfHCBytes is returned. This object should be read in conjunction wi ...

cmplsTeP2mpTunnelBranchPerfHCBytes

High capacity counter for number of bytes forwarded by the tunnel onto this branch. This object should be read in conjunction with cmplsTeP2mpTunnelBranchDiscontinuityTime.

cmplsTeP2mpTunnelBranchDiscontinuityTime

The value of sysUpTime on the most recent occasion at which any one or more of this row's Counter32 or Counter64 objects experienced a discontinuity. If no such discontinuity has occurred since the last re-initialization of the local management subsystem, ...

cmplsTeP2mpTunnelBranchLocalLabel

The local MPLS label for this branch. This object is not part of the original draft

cmplsTeP2mpTunnelBranchOutIfIndex

This is the index of outgoing TE link physical I/F for the P2MP egress tunnel branch. It is non-zero when the P2MP tunnel's outgoing branch has been signaled. This object is not part of the original draft

cmplsTeP2mpTunnelBranchOutLabel

The outgoing MPLS label for this branch.

cmplsTeP2mpTunnelBranchSignalArea

This is the IGP area instance name/number that the outgoing tunnel branch is signaled in. TE can allow (currently not supported for P2MP tunnels but could be in the future) the operator to restrict path computation to specific areas and this represents th ...

cmplsTeP2mpTunnelBranchInIfIndex

This is the index of incoming TE link physical I/F for the P2MP ingress tunnel branch. It is non-zero when the P2MP tunnel's incoming branch has been signaled and it is applicable only on mid point routers for tunnels having out-segment up and running. Th ...

cmplsTeP2mpTunnelNotificationEnable

If this object is true(1), then it enables the generation of cmplsTeP2mpTunnelDestUp and cmplsTeP2mpTunnelDestDown notifications. Otherwise these notifications are not emitted. Note that when tunnels have large numbers of destinations, setting this object ...

cmplsTeP2mpGeneralGroup

Collection of objects needed for MPLS P2MP.

cmplsTeP2mpScalarGroup

Scalar objects needed to implement P2MP MPLS tunnels.

cmplsTeP2mpGeneralGroupSup1

Addition to collection of objects needed for MPLS P2MP.

cmplsTeP2mpGeneralGroupSup2

Addition to collection of objects needed for MPLS P2MP.