CISCO-IETF-PIM-MIB Download

cPimJoinPruneInterval

The default interval at which periodic PIM-SM Join/Prune messages are to be sent.

cPimIfTable

The (conceptual) table listing the router's PIM interfaces. Along with PIM IGMP or MLD is enabled on all interfaces listed in this table.

cPimIfEntry

An entry (conceptual row) in the pimIfTable.

cPimIfIndex

The ifIndex value of this PIM interface.

cPimIfInetVersion

The Inet version of this row.

cPimIfAddressType

This objects identifies type of InetAddress presented in cPimIfAddress and cPimIfDR

cPimIfAddress

The Inet address of the PIM interface.

cPimIfNetMask

The network mask for the IP address of the PIM interface.

cPimIfMode

The configured mode of this PIM interface. A value of sparseDense is only valid for PIMv1. dense (1): indicates interface is running PIM dense mode sparse (2): indicates interface is running PIM sparse mode. sparseDense (3): indicates interface is runnin ...

cPimIfDR

The Designated Router on this PIM interface. For point-to- point interfaces, this object has the value 0.0.0.0 or 0::0

cPimIfHelloInterval

The frequency at which PIM Hello messages are transmitted on this interface.

cPimIfJoinPruneInterval

The frequency at which PIM Join/Prune messages are transmitted on this PIM interface. The default value of this object is the pimJoinPruneInterval.

cPimIfCBSRPreference

The preference value for the local interface as a candidate bootstrap router. The value of -1 is used to indicate that the local interface is not a candidate BSR interface.

cPimIfStatus

The status of this entry. Creating the entry enables PIM on the interface; destroying the entry disables PIM on the interface.

cPimNbrTable

The (conceptual) table listing the router's PIM neighbors.

cPimNbrEntry

An entry (conceptual row) in the pimNbrTable.

cPimNbrIfIndex

The value of ifIndex for the interface used to reach this PIM neighbor.

cPimNbrAddressType

This objects identifies type of InetAddress presented in cPimNbrAddress.

cPimNbrAddress

The IP address of the PIM neighbor for which this entry contains information.

cPimNbrUpTime

The time since this PIM neighbor (last) became a neighbor of the local router.

cPimNbrExpiryTime

The minimum time remaining before this PIM neighbor will be aged out.

cPimInetMRouteTable

The (conceptual) table listing PIM-specific information on a subset of the rows of the cIpMRouteTable defined in the IP Multicast MIB.

cPimInetMRouteEntry

An entry (conceptual row) in the cPimInetMRouteTable. There is one entry per entry in the cIpMRouteTable whose incoming interface is running PIM.

cPimInetMRouteUpstreamAssertTime

The time remaining before the router changes its upstream neighbor back to its RPF neighbor. This timer is called the Assert timer in the PIM Sparse and Dense mode specification. A value of 0 indicates that no Assert has changed the upstream neighbor awa ...

cPimInetMRouteAssertMetric

The metric advertised by the assert winner on the upstream interface, or 0 if no such assert is in received.

cPimInetMRouteAssertMetricPref

The preference advertised by the assert winner on the upstream interface, or 0 if no such assert is in effect.

cPimInetMRouteAssertRPTBit

The value of the RPT-bit advertised by the assert winner on the upstream interface, or false if no such assert is in effect.

cPimInetMRouteFlags

This object describes PIM-specific flags related to a multicast state entry. rpt (0): indicates the route is a shared-tree or RP-tree route. spt (1): indicates the route is a shortest-path-tree route.

cPimInetMRouteNextHopTable

The (conceptual) table listing PIM-specific information on a subset of the rows of the cIpMRouteNextHopTable defined in the IP Multicast MIB.

cPimInetMRouteNextHopEntry

An entry (conceptual row) in the cPimInetMRouteNextHopTable. There is one entry per entry in the cIpMRouteNextHopTable whose interface is running PIM and whose cIpMRouteNextHopState is pruned(1).

cPimInetMRouteNextHopPruneReason

This object indicates the reason why downstream interface was pruned, prune (1): indicates downstream interface was pruned in response to a PIM prune message. assert (3): indicates downstream interface was pruned due to PIM assert processing.

cPimRPMapTable

The (conceptual) table listing PIM information for candidate Rendezvous Points (RPs) for IP multicast groups. When the local router is the BSR, this information is obtained from received Candidate-RP-Advertisements. When the local router is not the BSR, ...

cPimRPMapEntry

An entry (conceptual row) in the pimRPsTable.

cPimRPMapComponent

A number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value.

cPimRPMapAddrType

Type of Inet address presented in this row. This includes cPimRPMapGroupAddress and cPimRPMapAddress

cPimRPMapGroupAddress

The IP multicast group address which, when combined with pimRPsGroupMask, gives the group prefix for which this entry contains information about the Candidate-RP.

cPimRPMapGroupMask

The multicast group address mask which, when combined with pimRPsGroupAddress, gives the group prefix for which this entry contains information about the Candidate-RP.

cPimRPMapAddress

The IP address of the Candidate-RP.

cPimRPMapHoldTime

The holdtime of a Candidate-RP. If the local router is not the BSR, this value is 0.

cPimRPMapExpiryTime

The minimum time remaining before the Candidate-RP will be declared down. If the local router is not the BSR, this value is 0.

cPimCRPTable

The (conceptual) table listing the IP multicast groups for which the local router is to advertise itself as a Candidate-RP when the value of cPimComponentCRPHoldTime is non-zero. If this table is empty, then the local router will advertise itself as a Ca ...

cPimCRPEntry

An entry (conceptual row) in the cPimCRPTable.

cPimCRPAddrType

Type of Inet address presented in this row. This includes cPimCRPGroupAddress and cPimCRPAddress

cPimCRPGroupAddress

The IP multicast group address which, when combined with cPimCRPGroupMask, identifies a group prefix for which the local router will advertise itself as a Candidate-RP.

cPimCRPGroupMask

The multicast group address mask which, when combined with cPimCRPGroupMask, identifies a group prefix for which the local router will advertise itself as a Candidate-RP.

cPimCRPAddress

The (unicast) address of the interface which will be advertised as a Candidate-RP.

cPimCRPRowStatus

The status of this row, by which new entries may be created, or old entries deleted from this table.

cPimComponentTable

The (conceptual) table containing objects specific to a PIM domain. One row exists for each domain to which the router is connected. A PIM-SM domain is defined as an area of the network over which Bootstrap messages are forwarded. Typically, a PIM-SM ro ...

cPimComponentEntry

An entry (conceptual row) in the cPimComponentTable.

cPimComponentIndex

A number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value. Routers that only support membership in a single PIM-SM domain should use a cPimComponentIndex value of 1.

cPimComponentBSRAddrType

Type of Inet address presented in cPimComponentBSRAddress.

cPimComponentBSRAddress

The IP address of the bootstrap router (BSR) for the local PIM region.

cPimComponentBSRExpiryTime

The minimum time remaining before the bootstrap router in the local domain will be declared down. For candidate BSRs, this is the time until the component sends an RP-Set message. For other routers, this is the time until it may accept an RP-Set message ...

cPimComponentCRPHoldTime

The holdtime of the component when it is a candidate RP in the local domain. The value of 0 is used to indicate that the local system is not a Candidate-RP.

cPimComponentStatus

The status of this entry. Creating the entry creates another protocol instance; destroying the entry disables a protocol instance.

cPimV2MIBGroup

A collection of objects to support management of PIM Sparse Mode (version 2) routers.

cPimDenseV2MIBGroup

A collection of objects to support management of PIM Dense Mode (version 2) routers.

cPimV2CRPMIBGroup

A collection of objects to support configuration of which groups a router is to advertise itself as a Candidate-RP.

cPimNextHopGroup

A collection of optional objects to provide per-next hop information for diagnostic purposes. Supporting this group may add a large number of instances to a tree walk, but the information in this group can be extremely useful in tracking down multicast c ...

cPimAssertGroup

A collection of optional objects to provide extra information about the assert election process. There is no protocol reason to keep such information, but some implementations may already keep this information and make it available. These objects can al ...