CISCO-LAG-MIB Download

clagAggDistributionProtocol

This object controls the load balancing algorithms used on this port channel interface to distribute outgoing data frames among its component interfaces.

clagAggDistributionAddressMode

The load balancing address mode for the device.

clagAggDistributionMplsProtocol

This object controls the load balancing algorithms used on this port channel interface to distribute outgoing MPLS data frames among its component interfaces. This object is only instantiated on platforms which support aggregation load balancing for MPLS ...

clagAggMaxAggregators

This object indicates the maximum number of aggregators supported by the device.

clagAggHashDistMethodGlobalConfig

Specifies the global configuration for hash distribution method applied on a port channel interface among its channel members. adaptive(1) : Adaptive hash distribution for the bundle among port channel members. fixed(2) : Fixed hash distribution fo ...

clagAggProtocolTable

A table that contains protocol information about every interface which supports link aggregation.

clagAggProtocolEntry

Entry containing aggregation protocol type for a particular interface. An entry is created in this table when its associated ifEntry is created and that interface supports link aggregation. The entry of this table is deleted when the associated ifEntry ...

clagAggProtocolType

The aggregation protocol type for the interface. On some platforms, aggregation protocol may be assigned per group. The group can be a collection of the ports which belong to a module or system. If the aggregation protocol is assigned to any of the port ...

clagAggPortTable

A table that contains information about every aggregation port that is associated with this system. This table contains additional objects for the dot3adAggPortTable.

clagAggPortEntry

An entry containing additional management information applicable to a particular aggregation port.

clagAggPortAdminStatus

The administrative status of the LACP protocol on this aggregation port.

clagAggPortRate

Specifies the requested exchange rate of LACP packets on this interface. fast(1) : The device requests its peers to send LACP packets at fast rate to this interface. normal(2): The decice requests its peers to send LACP packets at normal rate to th ...

clagAggPortListTable

This table augments the dot3adAggPortListTable and provides the complete list of ports associated with each Aggregator.

clagAggPortListEntry

A list of the ports associated with a given Aggregator.

clagAggPortListPorts

This object contains a list of ports currently associated with this Aggregator in the format of '[number_of_ports][cieIfDot1dBaseMappingPort1][...] [cieIfDot1dBaseMappingPortn]' where [number_of_ports] is of size 2 octet and indicates the number of ports ...

clagAggChannelIfTable

A table providing port channel configuration information for port channel interfaces identified by ifIndex.

clagAggChannelIfEntry

An entry containing port channel configuration information for port channel interfaces.

clagAggChannelIfFastSwitchOver

Specifies whether LACP protocol fast switchover mode is enabled on this port channel interface or not.

clagAggChannelIfMaxBundle

Specifies the maximum number of member ports that can be bundled on this port channel interface for LACP protocol.

clagAggChannelIfMinLink

Specifies the minimum number of bundled member ports that are needed in order for this port channel interface to be operational. A value of zero for this object indicates that no minimum number of bundled member ports are required for this port channel in ...

clagAggChannelIfHashDistAdminMethod

Specifies the hash distribution method that is administratively configured on this port channel interface upon its channel membership transition event. none(1) : Hash distribution algorithm on this port channel interface is not specifically configur ...

clagAggChannelIfHashDistOperMethod

Specifies the operational hash distribution method for this port channel interface among the port channel members. other(1) : None of the following. adaptive(2) : Adaptive hash distribution for the port channel interface among its channel membe ...

clagAggProtocolGroup

The object that provide aggregation protocol type of an interface. These are additional to the IEEE Std 802.3ad MIB.

clagAggPortGroup

A collection of objects that provide admin status about an aggregation port. These are additional to the IEEE Std 802.3ad MIB.

clagAggDistributionGroup

A collection of objects that provide the load balancing information for an aggregator. These are additional to the IEEE Std 802.3ad MIB.

clagAggDistributionMplsGroup

A collection of objects that provide the load balancing information for an aggregator for MPLS packets. These are additional to the IEEE Std 802.3ad MIB.

clagAggPortListGroup

A collection of object that provides information about ports in an aggregation.

clagAggMaxAggregatorsGroup

A collection of object that provides information about the maximum number of aggregators supported by the device.

clagAggRateGroup

A collection of object that provides information about the rate at which LACP packets are ingressed on interfaces.

clagAggChannelIfLacpGroup

A collection of objects that provides information about the LACP protocol configurations for port channel interfaces.

clagAggChannelIfHashDistMethodGroup

A collection of objects that provides information about the port channel configurations of hash distribution method on port channel interfaces.

clagAggHashDistGlobalGroup

A collection of object that provides information about global configuration of hash distribution method on port channel interface.

clagAggChannelIfMinLinkGroup

A collection of objects that provides information about the minimum link configurations for port channel interfaces.