CISCO-LWAPP-DOT11-MIB Download
This MIB is intended to be implemented on all those
devices operating as Central controllers, that
terminate the Light Weight Access Point Protocol
tunnel from Cisco Light-weight LWAPP Access Points.
This MIB provides the information about the
operational parameters of the 802.11 networks.
References about specific type of 802.11 flavors like
802.11a/b/g or 802.11n will be made whereever required
to indicate that the respective parameters are
applicable only to that particular type of 802.11
networks.
IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for CISCO-LWAPP-DOT11-MIB
- cldHtMacOperationsTable
- This table represents the operational parameters at the MAC layer for the 802.11n networks managed through the controller. An agent adds an entry to this table for every 802.11n band on startup.
- cldHtMacOperationsEntry
- Each entry represents the operational parameters at the MAC layer for 802.11n networks.
- cldHtDot11nBand
- This object identifies the 802.11n band the parameters correspond to.
- cldHtDot11nChannelBandwidth
- This object represents the channel bandwidth for the 802.11n networks in the particular band.
- cldHtDot11nRifsEnable
- This object is used to indicate the support for RIFS on this band. A value of 'true' indicates that RIFS is enabled for this band. A value of 'false' indicates that RIFS is disabled for this band.
- cldHtDot11nAmsduEnable
- This object is used to indicate the support for 802.11n A-MSDU on this band. A value of 'true' indicates that A-MSDU is enabled for this band. A value of 'false' indicates that A-MSDU is disabled for this band.
- cldHtDot11nAmpduEnable
- This object is used to indicate the support for 802.11n A-MPDU on this band. A value of 'true' indicates that A-MPDU is enabled for this band. A value of 'false' indicates that A-MPDU is disabled for this band.
- cldHtDot11nGuardIntervalEnable
- This object is used to indicate the support for 802.11n guard interval on this band. A value of 'true' indicates that guard interval is enabled for this band. A value of 'false' indicates that guard interval is disabled for this band.
- ciscoLwappDot11MIBMacOperGroup
- This collection of objects represents the operational parameters at the MAC layer for the 802.11n networks.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
