CISCO-LWAPP-MOBILITY-MIB Download
This MIB is intended to be implemented on all those
devices operating as Central Controllers (CC) that
terminate the Light Weight Access Point Protocol
tunnel from Light-weight LWAPP Access Points.
This MIB provides configuration and status information
about the 802.11 WLAN mobility.
IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for CISCO-LWAPP-MOBILITY-MIB
- cLMobilityAnchorTable
- This table represents the information about the 802.11 LWAPP Mobility Anchors on individual WLANs. +...............+ + + + ROUTER + + 10.16.1.1 + +...............+ .. . . . . . . . . . ...
- cLMobilityAnchorWlanSsid
- Local wlan-ssid to connect to Guest/Anchor switch
- cLMobilityAnchorSwitchAddressType
- Guest/Anchor switch Address type.
- cLMobilityAnchorSwitchAddress
- Guest/Anchor switch Address. The IP Address is limited to IPv4 and IPv6.
- cLMobilityAnchorStatus
- Operational and Connectivity status of the Mobility Anchor. controlpath: When bit is '0', this means successive ICMP pings to the anchor have failed. When is '1', this means anchor is reachable and responding to ICMP pings. datapath: When bit is '0', this ...
- cLMobilityAnchorGroupKeepAliveNumber
- This parameter determines how many successive ping attempts to the anchor should fail before the anchor is declared DOWN.
- cLMobilityAnchorGroupKeepAliveInterval
- This parameter determines the time interval (in seconds) between two consecutive ping attempts to an anchor.
- cLMobilityAnchorSmtStatus
- This object allows user to enable or disable Symmetric mobility tunneling for the controller. The controller provides inter-subnet mobility for clients roaming from one AP to another within a Wireless LAN. This mobility is asymmetric in nature where the ...
- cLMobilityAnchorWlanId
- This object uniquely identifies one instance of a WLAN on the controller.
- cLMobilityAnchorAddressType
- Guest/Anchor switch Address type.
- cLMobilityAnchorAddress
- Guest/Anchor switch Address. The IP Address is limited to IPv4 and IPv6
- cLNplus1RedundancyRev01ConfigGroup
- This is a collection of objects which can configured to control functional parameters of Guest Tunneling N+1 Redundancy feature in CISCO 4400 / 2006 series of WLAN controllers.
- cLNplus1RedundancyRev01StatusGroup
- This collection of objects represents the information about the general status attributes of Guest Tunneling N+1 Redundancy in CISCO 4400 / 2006 series of WLAN controllers.
- cLSymmetricTunnelingRev01ConfigGroup
- This is a collection of objects which can be configured to control functional parameters of Symmetric Mobility Tunneling feature in CISCO 4400 / 2006 series of WLAN controllers.
- cLSymmetricTunnelingRev01StatusGroup
- This collection of objects represents the information about the general status attributes of Symmetric Mobility Tunneling feature in CISCO 4400 / 2006 series of WLAN controllers.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.